mmotm 2009-11-24-16-47 uploaded
The mm-of-the-moment snapshot 2009-11-24-16-47 has been uploaded to
http://userweb.kernel.org/~akpm/mmotm/
and will soon be available at
git://git.zen-sources.org/zen/mmotm.git
It contains the following patches against 2.6.32-rc8:
origin.patch
drivers-media-dvb-dvb-core-dvb_frontendc-needs-semaphoreh.patch acerhdf-return-temperature-in-milidegree-instead-of-degree.patch thinkpad-acpi-fix-detection-of-old-thinkpads.patch drivers-rtc-rtc-pcf50633c-fix-use-after-free-in-pcf50633_rtc_probe.patch davinci-fb-fix-frame-buffer-driver-issues.patch fbdev-migrate-mailing-lists-to-vger.patch
kbuild-stepping-down-as-maintainer.patch thinkpad-acpi-fix-sign-of-erestartsys-return.patch nommu-ignore-the-address-parameter-in-the-file_mmap-security-check.patch linux-next.patch
linux-next-fixup.patch
next-remove-localversion.patch
i-need-old-gcc.patch
recordmcount-stfu.patch include-linux-compiler-gcc4h-gcc-402-doesnt-understand-__builtin_object_size.patch hardware-latency-detector-remove-default-m.patch sysfs-fix-sysfs_deprecated_v2-prompt.patch
aoe-prevent-cache-aliases.patch dma-debug-allow-dma_bidirectional-mappings-to-be-synced-with-dma_from_device-and.patch drivers-gpu-drm-i915-i915_dmac-fix-unused-var.patch drm-make-sure-page-protections-are-updated-after-changing-vm_flags.patch drm-radeon-kms-fix-oops-when-set_base-is-call-with-no-fb.patch v4l-dvb-mxl5007tc-fix-test-in-copy_reg_bits.patch x86-_end-symbol-missing-from-symbolmap.patch scsi_libc-avoid-calling-scsi_device_put-from-under-host_lock.patch scsi-fix-crash-when-disconnecting-usb-storage.patch scsi-fix-another-crash-at-disconnect-of-usb-strorage.patch enclosure-fix-oops-while-iterating-enclosure_status-array.patch hrtimers-remove-the-timer_stats_active-check-when-setting-the-start-info.patch itimers-fix-racy-writes-to-cpu_itimer-fields.patch posix-cpu-timers-optimize-and-document-timer_create-callback.patch emi62-fix-crash-when-trying-to-load-emi-62-firmware.patch mm-make-totalhigh_pages-unsigned-long.patch
kernel-core-add-smp_call_function_any.patch arch-x86-kernel-cpu-cpufreq-acpi-cpufreqc-avoid-cross-cpu-interrupts-by-using-smp_call_function_any.patch dell_laptop-when-the-hardware-switch-is-disabled-dont-actually-allow-changing-the-softblock-status.patch fujitsu-laptop-fix-tests-of-acpi_evaluate_integer-return.patch acpi-remove-nid_inval.patch acpi-thermal-display-forced-passive-trip-points-in-proc.patch thermal-only-set-passive_delay-for-forced_passive-cooling.patch thermal-disable-polling-if-passive_delay-and-polling_delay-are-both-unset.patch acerhdf-added-new-bios-versions.patch
drivers-acpi-acpi_padc-squish-warning.patch cmpc_acpi-add-support-for-classmate-pc-acpi-devices.patch cmpc_acpi-add-support-for-classmate-pc-acpi-devices-checkpatch-fixes.patch acpi-reintroduce-acpi_device_ops-shutdown-method.patch
x86-optimize-hweight32.patch
omap-return-ptr_err-rather-than-is_err.patch
avr32-convert-to-asm-generic-hardirqh.patch powerpc-sky-cpu-redundant-or-incorrect-tests-on-unsigned.patch mm-add-notifier-in-pageblock-isolation-for-balloon-drivers.patch powerpc-make-the-cmm-memory-hotplug-aware.patch powerpc-make-the-cmm-memory-hotplug-aware-update.patch drivers-gpu-drm-radeon-radeon_combiosc-fix-warning.patch drm-via-add-pci-id-for-via-vx800-chipset.patch konicawcc-possible-buffer-overflow-while-use-strncat.patch quickcam_messengerc-possible-buffer-overflow-while-use-strncat.patch drivers-media-video-move-dereference-after-null-test.patch sms-cards-make-id-unsigned-in-sms_get_board.patch dvb-make-struct-videobuf_queue_ops-constant.patch drivers-media-video-introduce-missing-kfree.patch
proc_fops-convert-av7110.patch
proc_fops-convert-cpia.patch
genirq-switch-proc-irq-spurious-to-seq_file.patch timer-stats-fix-del_timer_sync-and-try_to_del_timer_sync.patch clockeventsc-fix-symbol-was-not-declared-noise.patch posix-cpu-timers-reset-expire-cache-when-no-timer-is-running.patch hrtimer-correct-a-few-numbers-in-comments.patch clockevents-ensure-taht-min_delta_ns-is-increased-in-error-path.patch ia64-fix-sba-iommu-to-handle-allocation-failure-properly.patch ipath-use-bitmap_weight.patch
input-bcm5974-retract-efi-broken-suspend_resume.patch input-bcm5974-report-abs_mt-events.patch
kbuild-generate-modulesbuiltin.patch
kbuild-rebuild-fix-for-makefilemodbuiltin.patch kbuild-generate-modulesbuiltin-fix-2.patch kbuild-generate-modulesbuiltin-fix-2-checkpatch-fixes.patch kconfig-cross_compile-option.patch
kbuild-clean-up-marker.patch
kbuild-clear-marker-out-of-modpost.patch kbuild-genksyms-properly-consider-export_unused_symbol_gpl.patch drivers-leds-leds-ss4200c-fix-return-statement.patch
twl4030-fix-warning.patch
mtd-nand-davinci-correct-4-bit-error-correction.patch mtd-error-return-eio-instead-of-eio.patch
mtd-nand-fix-multi-chip-suspend-problem.patch mtd-nand-fix-multi-chip-suspend-problem-fix.patch jffs2-fix-memory-corruption-in-jffs2_read_inode_range.patch jffs2-fix-min-max-confusion.patch
ntfs-use-bitmap_weight.patch
3x59x-fix-pci-resource-management.patch bluetooth-fix-for-acer-bluetooth-optical-rechargeable-mouse.patch sunrpc-use-formatting-of-module-name-in-sunrpc.patch serial-fit-blackfin-uart-over-sport-driver-into-common-uart-infrastructure.patch serial-copy-uart-properties-of-upf_fixed_type-ports-provisioned-using-early_serial_setup.patch drivers-serial-remove-baud_table_size-macro.patch serial_cs-oxsemi-quirk-breaks-resume.patch atmel_serial-add-poll_get_char-and-poll_put_char-uart_ops.patch 8250-add-serial-transmitter-fully-empty-test.patch
imx-bit-confusion.patch
pci-dmar-add-__init-annotation-to-dmar_ir_support.patch scsi-add-__init-__exit-macros-to-ibmvstgtc.patch drivers-scsi-fnic-fnic_scsic-clean-up.patch
ibmmca-buffer-overflow.patch
scsi-eata-fix-buffer-overflow.patch
drivers-scsi-gdthc-fix-buffer-overflow.patch drivers-scsi-u14-34fc-fix-uffer-overflow.patch drivers-scsi-lpfc-lpfc_vportc-fix-read-buffer-overflow.patch osst-fix-read-buffer-overflow.patch
scsi-fix-func-names-in-kernel-doc.patch gdth-unmap-ccb_phys-when-scsi_add_host-fails-in-gdth_eisa_probe_one.patch zfcp-test-kmalloc-failure-in-scsi_get_vpd_page.patch st-fix-test-of-value-range-in-st_set_options.patch drivers-scsi-libsas-use-sam_good.patch ncr5380-bit-mr_dma_mode-set-twice-in-ncr5380_transfer_dma.patch drivers-scsi-remove-unnecessary-null-test.patch scsi-add-hpsa-driver-for-hp-smart-array-controllers.patch drivers-message-move-dereference-after-null-test.patch scsi-pmcraid-redundant-check-in-pmcraid_check_ioctl_buffer.patch drivers-block-dac960c-use-dac960_v2_controller.patch r8192u_core-test-for-negative-error-in-rtl8192_rx_isr.patch fix-section-mismatch-in-early-ehci-dbgp.patch drivers-usb-host-xhci-memc-introduce-missing-kfree.patch drivers-usb-host-ehci-omapc-introduce-missing-kfree.patch drivers-usb-wusbcore-introduce-missing-usb_free_urb.patch wusb-use-sizeof-struct-rather-than-pointer.patch usb-ftdi_sio-fix-error-message-on-close.patch
usb-ftdi_sio-remove-obsolete-comment.patch vfs-fix-vfs_rename_dir-for-fs_rename_does_d_move-filesystems.patch raw-fix-rawctl-compat-ioctls-breakage-on-amd64-and-itanic.patch vfs-improve-comment-describing-fget_light.patch
ecryptfs-another-lockdep-issue.patch
fs-anon_inodes-implement-dname.patch
fs-remove-unneeded-dcache_unhashed-tricks.patch fs-improve-remountro-vs-buffercache-coherency.patch vfs-make-real_lookup-do-dentry-revalidation-with-i_mutex-held.patch vfs-clean-up-real_lookup.patch vfs-remove-extraneous-null-d_inode-check-from-do_filp_open.patch xtensa-use-generic-sys_pipe.patch
xtensa-convert-to-asm-generic-hardirqh.patch
xtensa-includecheck-fix-vectorss.patch
percpu-avoid-calling-__pcpu_ptr_to_addrnull.patch
mm-includecheck-fix-slqb.patch
mm.patch
oom-dump-stack-and-vm-state-when-oom-killer-panics.patch readahead-add-blk_run_backing_dev.patch mm-warn-once-when-a-page-is-freed-with-pg_mlocked-set.patch page-types-constify-read-only-arrays.patch page-types-unsigned-cannot-be-less-than-0-in-add_page.patch page-types-learn-to-describe-flags-directly-from-command-line.patch page-types-whitespace-alignment.patch page-types-exit-early-when-invoked-with-d-describe.patch mmap-dont-return-enomem-when-mapcount-is-temporarily-exceeded-in-munmap.patch mmap-dont-return-enomem-when-mapcount-is-temporarily-exceeded-in-munmap-checkpatch-fixes.patch mm-vsmcan-check-shrink_active_list-sc-isolate_pages-return-value.patch dev-mem-remove-redundant-test-on-len.patch
dev-mem-introduce-size_inside_page.patch
dev-mem-cleanup-unxlate_dev_mem_ptr-calls.patch dev-mem-cleanup-unxlate_dev_mem_ptr-calls-fix.patch dev-mem-cleanup-unxlate_dev_mem_ptr-calls-fix-fix.patch dev-mem-make-size_inside_page-logic-straight.patch dev-mem-remove-the-written-variable-in-write_kmem.patch dev-mem-remove-the-written-variable-in-write_kmem-fix.patch dev-mem-remove-redundant-parameter-from-do_write_kmem.patch mm-move-inc_zone_page_statenr_isolated-to-just-isolated-place.patch nodemask-make-nodemask_alloc-more-general.patch hugetlb-rework-hstate_next_node_-functions.patch hugetlb-add-nodemask-arg-to-huge-page-alloc-free-and-surplus-adjust-functions.patch hugetlb-add-nodemask-arg-to-huge-page-alloc-free-and-surplus-adjust-functions-fix.patch hugetlb-factor-init_nodemask_of_node.patch hugetlb-derive-huge-pages-nodes-allowed-from-task-mempolicy.patch hugetlb-add-generic-definition-of-numa_no_node.patch hugetlb-add-per-node-hstate-attributes.patch hugetlb-update-hugetlb-documentation-for-numa-controls.patch hugetlb-use-only-nodes-with-memory-for-huge-pages.patch mm-clear-node-in-n_high_memory-and-stop-kswapd-when-all-memory-is-offlined.patch hugetlb-handle-memory-hot-plug-events.patch hugetlb-offload-per-node-attribute-registrations.patch hugetlb-offload-per-node-attribute-registrations-fix.patch mm-add-gfp-flags-for-nodemask_alloc-slab-allocations.patch vmalloc-adjust-gfp-mask-passed-on-nested-vmalloc-invocation.patch swap_info-private-to-swapfilec.patch
swap_info-change-to-array-of-pointers.patch
swap_info-include-first_swap_extent.patch
swap_info-include-first_swap_extent-fix.patch swap_info-include-first_swap_extent-fix-fix.patch swap_info-miscellaneous-minor-cleanups.patch
swap_info-swap_has_cache-cleanups.patch
swap_info-swap_map-of-chars-not-shorts.patch
swap_info-swap-count-continuations.patch
swap_info-note-swap_map_shmem.patch
swap_info-reorder-its-fields.patch mm-vmscan-change-comment-generic_file_write-to-__generic_file_aio_write.patch rmap-fix-the-comment-for-try_to_unmap_anon.patch
rmap-simplify-try_to_unmap_file.patch
rmap-move-the-out-to-a-more-proper-place.patch oom_kill-use-rss-value-instead-of-vm-size-for-badness.patch oom-kill-show-virtual-size-and-rss-information-of-the-killed-process.patch oom-kill-show-virtual-size-and-rss-information-of-the-killed-process-fix.patch oom-kill-fix-numa-consraint-check-with-nodemask-v42.patch oom-kill-fix-numa-consraint-check-with-nodemask-v42-checkpatch-fixes.patch page-allocator-wait-on-both-sync-and-async-congestion-after-direct-reclaim.patch vmscan-have-kswapd-sleep-for-a-short-interval-and-double-check-it-should-be-asleep.patch vmscan-stop-kswapd-waiting-on-congestion-when-the-min-watermark-is-not-being-met-v2.patch vmscan-have-kswapd-sleep-for-a-short-interval-and-double-check-it-should-be-asleep-fix-1.patch mm-define-page_mapping_flags.patch
mm-mlocking-in-try_to_unmap_one.patch
mm-mlocking-in-try_to_unmap_one-fix.patch
mm-mlocking-in-try_to_unmap_one-fix-fix.patch
mm-config_mmu-for-pg_mlocked.patch
mm-pass-address-down-to-rmap-ones.patch
mm-stop-ptlock-enlarging-struct-page.patch
mm-sigbus-instead-of-abusing-oom.patch mm-add-numa-node-symlink-for-memory-section-in-sysfs.patch mm-refactor-register_cpu_under_node.patch
mm-refactor-unregister_cpu_under_node.patch mm-add-numa-node-symlink-for-cpu-devices-in-sysfs.patch documentation-abi-sys-devices-system-cpu-cpu-node.patch vmscan-separate-scswap_cluster_max-and-scnr_max_reclaim.patch vmscan-kill-hibernation-specific-reclaim-logic-and-unify-it.patch vmscan-zone_reclaim-dont-use-insane-swap_cluster_max.patch vmscan-kill-scswap_cluster_max.patch vmscan-make-consistent-of-reclaim-bale-out-between-do_try_to_free_page-and-shrink_zone.patch ksm-three-remove_rmap_item_from_tree-cleanups.patch ksm-remove-redundancies-when-merging-page.patch ksm-cleanup-some-function-arguments.patch
ksm-singly-linked-rmap_list.patch
ksm-separate-stable_node.patch
ksm-stable_node-point-to-page-and-back.patch
ksm-fix-mlockfreed-to-munlocked.patch
ksm-let-shared-pages-be-swappable.patch
ksm-hold-anon_vma-in-rmap_item.patch
ksm-take-keyhole-reference-to-page.patch
ksm-share-anon-page-without-allocating.patch
ksm-mem-cgroup-charge-swapin-copy.patch
ksm-rmap_walk-to-remove_migation_ptes.patch
ksm-memory-hotremove-migration-only.patch
ksm-remove-unswappable-max_kernel_pages.patch mm-memory_hotplug-make-offline_pages-static.patch hugetlb-prevent-deadlock-in-__unmap_hugepage_range-when-alloc_huge_page-fails-2.patch mm-fix-section-mismatch-in-memory_hotplugc.patch
mm-simplify-try_to_unmap_one.patch
mm-simplify-try_to_unmap_one-fix.patch mm-slab-allocate-memory-section-nodemask-for-large-systems.patch mm-bootmemc-properly-__init-annotate-helper-functions.patch writeback-fix-missing-kernel-doc-notation.patch security-min_addrc-make-init_mmap_min_addr-static.patch frv-duplicate-output_buffer-of-e03.patch frv-duplicate-output_buffer-of-e03-checkpatch-fixes.patch nommu-fix-malloc-performance-by-adding-uninitialized-flag.patch procfs-use-proper-units-for-nommu-statm.patch procfs-use-proper-units-for-nommu-statm-fix.patch procfs-allow-threads-to-rename-siblings-via-proc-pid-tasks-tid-comm.patch procfs-allow-threads-to-rename-siblings-via-proc-pid-tasks-tid-comm-cleanup.patch procfs-allow-threads-to-rename-siblings-via-proc-pid-tasks-tid-comm-doc.patch const-constify-remaining-dev_pm_ops.patch
pm-fix-kernel-doc-notation.patch
drivers-cpuidle-move-dereference-after-null-test.patch cris-convert-to-use-arch_gettimeoffset.patch cryptocop-fix-assertion-in-create_output_descriptors.patch floppy-add-an-extra-bound-check-on-ioctl-arguments.patch floppy-add-an-extra-bound-check-on-ioctl-arguments-fix.patch uml-irq-register-race-condition.patch timecompare-fix-half-y2k38-problem-in-timecompare_update-while-calculating-offset.patch warn_once-use-bool-for-boolean-flag.patch dynamic_debugh-kernelh-remove-kbuild_modname-from-dynamic_pr_debug.patch ad525x_dpot-new-driver-for-ad525x-digital-potentiometers.patch generic-ipi-cleanup-for-generic_smp_call_function_interrupt.patch drivers-misc-add-driver-for-texas-instruments-dac7512.patch drivers-misc-add-driver-for-texas-instruments-dac7512-update.patch init-mainc-fix-symbol-shadows-noise.patch kernelh-remove-initialization-of-bool-in-printk_once.patch rwsem-spinlock-remove-useless-function-exports.patch rwsem-fix-rwsem_is_locked-bugs.patch
rwsem-fix-rwsem_is_locked-bugs-fix.patch kallsyms-remove-deprecated-print_fn_descriptor_symbol.patch kernel-sysc-fix-warning-do-while-statement-is-not-a-compound-statement-noise.patch misc-remove-mac-pmu-function-declaration-from-misc-device-class.patch kernel-sysc-implement-prctlpr_get_endian-for-all-architectures.patch kernelh-add-printk_ratelimited-and-pr_level_rl.patch kernelh-add-printk_ratelimited-and-pr_level_rl-checkpatch-fixes.patch kernelh-add-printk_ratelimited-and-pr_level_rl-rename.patch make-debug_bugverbose-default-to-y.patch
gitignore-add-bzip2-compressed-files.patch errh-add-helper-function-to-simplify-pointer-error-checking.patch errh-add-helper-function-to-simplify-pointer-error-checking-fix.patch drivers-char-miscc-clear-allocation-bit-in-minor-bitmap-when-device-register-fails.patch drivers-char-miscc-use-bitmap-bitops-functions-for-dynamic-minor-number-allocation.patch drivers-char-miscc-use-a-proper-range-for-minor-number-dynamic-allocation.patch cs5535-gpio-add-amd-cs5535-cs5536-gpio-driver-support.patch cs5535-gpio-request-function-mask-names-added.patch alsa-cs5535audio-free-olpc-quirks-from-reliance-on-mgeode_lx-cpu-optimization.patch cs5535-add-a-generic-mfgpt-driver.patch cs5535-add-a-generic-clock-event-mfgpt-driver.patch cs5535-move-the-divil-msr-definition-into-linux-cs5535h.patch cs5535-move-vsa2-checks-into-linux-cs5535h.patch cs5535-define-lxfb-gxfb-msrs-in-linux-cs5535h.patch cs5535-drop-the-geode-specific-mfgpt-gpio-code.patch vt-introduce-and-use-vt_kmsg_redirect-function.patch always-print-panic-message-on-current-console.patch scripts-get_maintainerpl-add-roles-and-rolestats.patch scripts-get_maintainerpl-fix-non-with-git-blame-and-cleanups.patch scripts-get_maintainerpl-support-multiple-vcss-add-mercurial.patch maintainers-mark-cifs-mailing-list-as-moderated-for-non-subscribers.patch lib-vsprintfc-add-%pu-to-print-uuid-guids.patch fs-xfs-xfs_log_recoverc-use-%pu-to-print-uuids.patch randomc-use-%pu-to-print-uuids.patch drivers-firmware-dmi_scanc-use-%pub-to-print-uuids.patch drivers-md-mdc-use-%pu-to-print-uuids.patch
fs-gfs2-sysc-use-%pub-to-print-uuids.patch
fs-ubifs-use-%pub-to-print-uuids.patch
efih-use-%pul-to-print-uuids.patch
lib-introduce-strim.patch
compat_ioctl-remove-vt-specific-ioctl-handlers.patch compat_ioctl-do-not-hold-bkl-in-handlers.patch
firmware-only-allow-edd-on-x86.patch
mxcmmc-fix-error-path-in-mxcmci_probe.patch
sdio-rework-cis-tuple-parsing.patch
drivers-mmc-move-dereference-after-null-test.patch msm_sdccc-add-missing-include-fix-compilation.patch msm_sdccc-add-missing-include-fix-compilation-checkpatch-fixes.patch davinci-mmc-mmc-sd-controller-driver-for-davinci-family.patch davinci-mmc-modify-data-types-of-edma-related-variables.patch davinci-mmc-add-cpufreq-support.patch
mmci-omap-remove-bogus-check-for-host-iclk.patch sdhci-add-support-for-the-syskonnect-cardbus2sdio-adapter.patch s3cmci-convert-missed-s3c2410_gpio-calls-to-gpiolib-calls.patch mmc-add-module-parameter-to-set-whether-cards-are-assumed-removable.patch atmel-mci-change-use-of-dma-slave-interface.patch mmc-atmel-mci-new-mci2-module-support-in-atmel-mci-driver.patch sdio-recognize-io-card-without-powercycle.patch scripts-checkpatchpl-add-warn-on-sizeof.patch checkpatch-trivial-fix-for-trailing-statements-check.patch checkpatchpl-allow-80-char-lines-for-logging-functions-not-just-printk.patch checkpatch-fix-false-positive-on-__initconst.patch crc32-minor-optimizations-and-cleanup.patch crc32-minor-optimizations-and-cleanup-checkpatch-fixes.patch hwmon-driver-for-texas-instruments-amc6821-chip.patch lis3lv02d-axis-remap-and-resource-setup-release.patch
lis3lv02d-i2c-support.patch
hwmon-w83627ehf-updates.patch
hwmon-w83627ehf-updates-checkpatch-fixes.patch
lis3lv02d-send-sync-event.patch
lis3lv02d-correct-memory-leak-in-module-unload.patch lis3-update-documentation-and-comments.patch
lis3-fix-show-rate-for-8-bits-chips.patch
lis3lv02d-proper-power-on-sequence.patch proc-rename-de_get-to-pde_get-and-inline-it.patch binfmt-introduce-coredump-parameter-structure.patch binfmt-pass-mm-flags-as-a-coredump-parameter-for-consistency.patch atmel_spi-fix-dma-addr-calculation-for-len-buffer_size.patch spi-controller-driver-for-designware-spi-core.patch spi-add-pci-interface-driver-for-designware-spi-core.patch spi-add-pci-interface-driver-for-designware-spi-core-fix.patch spi-controller-driver-for-designware-spi-core-fix.patch spidev-add-proper-section-markers.patch spidev-use-declare_bitmap-instead-of-declaring-the-array.patch spidev-use-declare_bitmap-instead-of-declaring-the-array-checkpatch-fixes.patch spi-drain-mxc-spi-transfer-buffer-when-probing-device.patch spi_s3c24xx-add-fiq-pseudo-dma-support.patch vt-make-the-default-cursor-shape-configurable.patch autofs4-use-helper-functions-for-active-list-handling.patch autofs4-use-helper-functions-for-expiring-list.patch autofs4-use-helper-function-for-need-mount-check.patch autofs4-use-autofs_info-for-pending-flag.patch autofs4-renamer-unhashed-to-active-in-autofs4_lookup.patch autofs4-cleanup-active-and-expire-lookup.patch autofs4-eliminate-d_unhashed-in-path-walk-checks.patch autofs4-rename-dentry-to-active-in-autofs4_lookup_active.patch autofs4-rename-dentry-to-expiring-in-autofs4_lookup_expiring.patch autofs4-always-use-lookup-for-lookup.patch
rtc-disable-hpet-emulation-on-suspend.patch rtc-fix-driver-data-issues-in-several-rtc-drivers.patch rtc-cmos-convert-rtc_aie-rtc_uie-to-rtc-irq-api.patch rtc-ds1511-fix-races-around-device-registration.patch rtc-tx4939-fix-races-around-device-registration.patch rtc-ds1553-fix-races-around-device-registration.patch rtc-ds1742-fix-races-around-device-registration.patch rtc-stk17ta8-fix-races-around-device-registration.patch rtc-do-not-use-container_of-macro-as-an-argument-for-to_platform_device.patch efirtc-explicitly-set-llseek-to-no_llseek.patch rtc-pcf50633-manage-rtc-alarm-pending-flag.patch
rtc-mv-add-support-for-alarm.patch
rtc-convert-wm8350-rtc-driver-to-dev_pm_ops.patch rtc-add-freescale-mc13783-rtc-driver.patch rtc-make-rtc-omap-driver-ioremap-its-register-space.patch rtc-add-driver-for-bq32000-i2c-rtc.patch rtc-remove-__raw_-accessors-from-pl031-rtc.patch rtc-ds1307-make-it-possible-to-share-an-irq.patch rtc-set-wakeup-capability-for-i2c-and-spi-rtc-drivers.patch gpio-fix-test-on-unsigned-in-lnw_irq_type.patch gpio-add-gpio-driver-for-the-timberdale-fpga.patch gpiolib-add-support-for-changing-value-polarity-in-the-sysfs.patch drivers-gpio-pca953xc-add-interrupt-handling-capability.patch gpio-show-irq-settings-even-if-gpio-direction-is-output.patch gpio-add-driver-for-max7300-i2c-gpio-extender.patch gpio-langwell-gpio-driver-miscellaneous-clean-ups.patch gpiolib-add-names-file-in-gpio-chip-sysfs.patch fbdev-bfin-lq035q1-fb-new-blackfin-landscape-lcd-ez-extender-driver.patch fbdev-bfin-lq035q1-fb-new-blackfin-landscape-lcd-ez-extender-driver-v4.patch fbdev-bfin-t350mcqb-fb-handle-all-resources-in-suspend-resume.patch fbdev-bfin-t350mcqb-fb-fix-lcd-dimensions.patch fbdev-tv_paln-bit-set-twice-in-sisfb_detect_vb_connect.patch fbdev-drop-custom-atoi-from-drivers-video-modedbc.patch
add-palette-register-check.patch
drivers-video-move-dereference-after-null-test.patch mb862xxfb-add-acceleration-support-for-coral-p-coral-pa-imageblt-copyarea-fillrect.patch mb862xxfb-add-acceleration-support-for-coral-p-coral-pa-imageblt-copyarea-fillrect-fix.patch mb862xxfb-add-acceleration-support-for-coral-p-coral-pa-imageblt-copyarea-fillrect-fix2.patch mb862xxfb-add-acceleration-support-for-coral-p-coral-pa-imageblt-copyarea-fillrect-fix2-fix-3.patch davinci-fb-calculate-the-clock-divider-from-pixel-clock-info.patch davinci-fb-add-cpufreq-support.patch
lxfb-add-copyright-license-info.patch
i810fb-fix-stack-exploding.patch
sm501-fix-missing-uses-of-resource_size.patch sm501-fix-use-of-old-asm-ioh-instead-of-linux-ioh.patch sm501-implement-acceleration-features.patch intelfb-fix-setting-of-active-pipe-with-lvds-displays.patch const-constify-remaining-pipe_buf_operations.patch ext2-avoid-warn-messages-when-failing-to-write-to-the-superblock.patch ext2-avoid-warn-messages-when-failing-to-write-to-the-superblock-checkpatch-fixes.patch hfsplus-identify-journal-info-block-in-volume-header.patch hfsplus-fix-journal-detection.patch ufs-pass-qstr-instead-of-dentry-where-necessary-for-nfs.patch
ufs-nfs-support.patch
reiserfs-remove-proc-fs-reiserfs-version.patch reiserfs-dont-compile-procfso-at-all-if-no-support.patch reiserfs-truncate-blocks-not-used-by-a-write-v2.patch
hpfs-use-hweight32.patch
hpfs-use-bitmap_weight.patch
fatfs-use-common-time_to_tm-in-fat_time_unix2fat.patch docs-large-update-to-ioctl-numbertxt.patch doc-submitchecklist-add-ioctls-remove-osdl-reference.patch memcg-coalesce-uncharge-during-unmap-truncate.patch memcg-coalesce-charging-via-percpu-storage.patch memcg-coalesce-charging-via-percpu-storage-fix.patch memcg-coalesce-charging-via-percpu-storage-fix-2.patch memcg-make-memcgs-file-mapped-consistent-with-global-vm.patch memcg-add-mem_cgroup_cancel_charge.patch
memcg-cleanup-mem_cgroup_move_parent.patch
memcg-remove-memcg_tasklist.patch
ptrace-cleanup-ptrace_init_task-ptrace_link-path.patch ptrace-copy_process-should-disable-stepping.patch ptrace-introduce-user_single_step_siginfo-helper.patch ptrace-powerpc-implement-user_single_step_siginfo.patch ptrace-change-tracehook_report_syscall_exit-to-handle-stepping.patch ptrace-x86-implement-user_single_step_siginfo.patch ptrace-x86-change-syscall_trace_leave-to-rely-on-tracehook-when-stepping.patch signals-send_sig_noinfo-should-be-considered-as-si_fromuser.patch signals-send_signal-use-si_fromuser-to-detect-from_ancestor_ns.patch signals-cosmetic-collect_signal-use-si_user.patch
signals-kill-force_sig_specific.patch signals-check-group_stop_count-after-tracehook_get_signal.patch do_wait-optimization-do-not-place-sub-threads-on-task_struct-children-list.patch ipc-ns-fix-memory-leak-idr.patch
ipc-semc-sem-optimise-undo-list-search.patch
ipc-semc-sem-use-list-operations.patch
ipc-semc-sem-preempt-improve.patch
ipc-semc-optimize-if-semops-fail.patch
ipc-semc-add-a-per-semaphore-pending-list.patch ipc-semc-optimize-single-semop-operations.patch ipc-semc-optimize-single-sops-when-semval-is-zero.patch drivers-char-ipmi-use-kcs_idle_state.patch
elf-kill-use_elf_core_dump.patch
char-cyclades-fix-compiler-warning.patch cyclades-allow-overriding-isa-defaults-also-when-the-driver-is-built-in.patch char-mxser-remove-unnecessary-tty-test.patch
isicomc-use-pr_fmt-and-pr_level.patch hvc_console-fix-test-on-unsigned-in-hvc_console_print.patch moxa-remove-ifdef-module-completely.patch drivers-char-keyboardc-fix-braille-keyboard-keysym-generation.patch edac-i5100-clean-controller-to-channel-terms.patch
edac-i5100-add-scrubbing.patch
edac-i5100-add-6-ranks-per-channel.patch
drivers-edac-introduce-missing-kfree.patch dma-mapping-fix-off-by-one-error-in-dma_capable.patch irq-fix-test-in-__exit-parport_mfc3_exit.patch parport_pcc-use-correct-length-in-strncmp.patch kexec-premit-reduction-of-the-reserved-memory-size.patch kexec-premit-reduction-of-the-reserved-memory-size-fix.patch aio-remove-unused-field.patch
aio-dont-zero-out-the-pages-array-inside-struct-dio.patch aio-dont-zero-out-the-pages-array-inside-struct-dio-fix.patch direct-io-cleanup-blockdev_direct_io-locking.patch direct-io-cleanup-blockdev_direct_io-locking-checkpatch-fixes.patch x86-uv-introduce-a-means-to-translate-from-gpa-socket_paddr.patch x86-uv-xpc-needs-to-provide-an-abstraction-for-uv_gpa.patch x86-uv-introduce-uv_gpa_is_mmr.patch x86-uv-implement-a-gru_read_gpa-kernel-function.patch x86-uv-update-xpc-to-handle-updated-bios-interface.patch x86-uv-xpc-null-deref-when-mesq-becomes-empty.patch x86-uv-xpc_make_first_contact-hang-due-to-not-accepting-active-state.patch x86-uv-xpc-receive-message-reuse-triggers-invalid-bug_on.patch gru-initial-gru-based-on-blade-topology.patch gru-add-comments-raised-in-previous-code-reviews.patch gru-fix-istatus-race-in-gru-tlb-dropin.patch
gru-handle-blades-without-memory.patch
gru-allow-users-to-specify-gru-chiplet-1.patch gru-allow-users-to-specify-gru-chiplet-2.patch gru-allow-users-to-specify-gru-chiplet-3.patch
gru-fix-bug-in-module-unload.patch
gru-improve-messages-for-malfunctioning-grus.patch gru-support-64-bit-gru-addresses.patch gru-handle-failures-to-mmu_notifier_register.patch gru-add-debug-option-for-cache-flushing.patch
gru-add-test-for-gru_copy_gpa.patch
gru-check-for-valid-vma.patch
gru-fix-prefetch-and-speculation-bugs.patch
gru-update-irq-infrastructure.patch
gru-add-additional-gru-statistics.patch gru-expicitly-set-instruction-status-to-active.patch gru-preload-tlb-for-bcopy-instructions.patch
gru-fix-bug-in-exception-handling.patch
gru-add-symbolic-names-for-gru-error-code.patch
gru-remove-stray-local_irq_enable.patch gru-check-for-correct-gru-chiplet-assignment.patch gru-update-gru-structures-to-match-latest-hardware-spec.patch gru-fix-bug-in-allocation-of-kernel-contexts.patch
gru-add-hugepage-support.patch
gru-fix-gru-interrupt-race-at-deallocate.patch gru-improve-gru-tlb-dropin-statistics.patch
gru-update-driver-version-number.patch drivers-media-video-cx23885-needs-kfifo-conversion.patch drivers-media-video-cx23885-needs-kfifo-updates.patch kfifo-move-struct-kfifo-in-place.patch
kfifo-move-out-spinlock.patch
kfifo-cleanup-namespace.patch kfifo-rename-kfifo_put-into-kfifo_in-and-kfifo_get-into-kfifo_out.patch kfifo-add-define_kfifo-and-friends-add-very-tiny-functions.patch kfifo-add-kfifo_skip-kfifo_from_user-and-kfifo_to_user.patch kfifo-add-record-handling-functions.patch resource-constify-arg-to-resource_size-and-resource_type.patch qnx4fs-remove-remains-of-the-defunct-write-support.patch
qnx4-use-hweight8.patch
zlib-optimize-inffast-when-copying-direct-from-output.patch zlib-optimize-inffast-when-copying-direct-from-output-checkpatch-fixes.patch lib-add-support-for-lzo-compressed-kernels.patch lib-add-support-for-lzo-compressed-kernels-checkpatch-fixes.patch lib-add-support-for-lzo-compressed-kernels-checkpatch-fixes-cleanup.patch arm-add-support-for-lzo-compressed-kernels.patch arm-add-support-for-lzo-compressed-kernels-fix.patch x86-add-support-for-lzo-compressed-kernels.patch add-lzo-compression-support-for-initramfs-and-old-style-initrd.patch bitmap-introduce-bitmap_set-bitmap_clear-bitmap_find_next_zero_area.patch iommu-helper-use-bitmap-library.patch
isp1362-hcd-use-bitmap_find_next_zero_area.patch mlx4-use-bitmap_find_next_zero_area.patch
sparc-use-bitmap_find_next_zero_area.patch
ia64-use-bitmap_find_next_zero_area.patch
genalloc-use-bitmap_find_next_zero_area.patch
sound-core-pcm_timerc-use-lib-gcdc.patch net-netfilter-ipvs-ip_vs_wrrc-use-lib-gcdc.patch net-netfilter-ipvs-ip_vs_wrrc-use-lib-gcdc-fix.patch vfs-take-2add-set_page_dirty_notag.patch reiser4-vfs-add-super_operationssync_inodes-2.patch reiser4-export-remove_from_page_cache.patch reiser4-export-remove_from_page_cache-fix.patch
reiser4-export-find_get_pages.patch
reiser4.patch
reiser4-adjust-to-the-new-aops.patch
reiser4-adjust-to-the-new-aops-fixup.patch reiser4-remove-simple_prepare_write-usage.patch reiser4-remove-simple_prepare_write-usage-checkpatch-fixes.patch fs-symlink-write_begin-allocation-context-fix-reiser4-fix.patch reiser4-handling-error-returned-by-d_obtain_alias-fixup.patch reiser4-update-names-of-quota-methods.patch
reiser4-use-set_page_dirty_notag.patch
fs-reiser4-add-parenths-around-x-y.patch fs-reiser4-contextc-current_is_pdflush-got-removed.patch
reiser4-fix.patch
reiser4-rename-psched-to-dispatch.patch
reiser4-drop-journal-info.patch
reiser4-fix-compile-warnings.patch reiser4-reduce-frame-size-of-reiser4_init_super_data.patch reiser4-reduce-frame-size-of-reiser4_init_super_data-fixup.patch
reiser4-disable.patch
make-sure-nobodys-leaking-resources.patch
journal_add_journal_head-debug.patch
releasing-resources-with-children.patch
make-frame_pointer-default=y.patch
mutex-subsystem-synchro-test-module.patch mutex-subsystem-synchro-test-module-add-missing-header-file.patch slab-leaks3-default-y.patch
put_bh-debug.patch
add-debugging-aid-for-memory-initialisation-problems.patch workaround-for-a-pci-restoring-bug.patch
prio_tree-debugging-patch.patch
single_open-seq_release-leak-diagnostics.patch
add-a-refcount-check-in-dput.patch
getblk-handle-2tb-devices.patch
getblk-handle-2tb-devices-fix.patch
undeprecate-pci_find_device.patch
notify_change-callers-must-hold-i_mutex.patch
BUG at scsi_lib.c:1108 [Was: mmotm 2009-11-24-16-47 uploaded]
Quoted 1 line · On 11/25/2009 01:47 AM, [email protected] wrote:
The mm-of-the-moment snapshot 2009-11-24-16-47 has been uploaded to
Hi, I'm hitting the BUG below in the past two -mmotm's (2009-11-24-16-47, 2009-11-17-14-03):
kernel BUG at /home/l/latest/xxx/drivers/scsi/scsi_lib.c:1108! invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/kernel/uevent_seqnum
CPU 1
Modules linked in: ath5k ath Pid: 10, comm: events/1 Not tainted 2.6.32-rc8-mm1_64 #905 To Be Filled By O.E.M. RIP: 0010:[<ffffffff81291cda>] [<ffffffff81291cda>] scsi_setup_fs_cmnd+0x8a/0xa0 RSP: 0018:ffff8801cb88db20 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8801c472b800 RCX: ffff8801c403a000 RDX: 0000000001082421 RSI: ffff8801c3d01000 RDI: ffff8801c472b800 RBP: ffff8801cb88db30 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8801c53e68a0 R11: 0000000000000000 R12: ffff8801c3d01000 R13: ffff8801c472b800 R14: 0000000000000000 R15: ffff8801c472b848 FS: 0000000000000000(0000) GS:ffff880028280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00007f401b0065c0 CR3: 00000001c3e03000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process events/1 (pid: 10, threadinfo ffff8801cb88c000, task ffff8801cb864140) Stack: ffff8801c3d01000 ffff8801c53e68a0 ffff8801cb88dba0 ffffffff81299550 <0> ffff8801cb88db90 ffffffff81193a2a ffff8801cb88dba0 ffff8801c403a000 <0> 0000000000000000 ffff8801c4038b60 ffff8801c3d01000 ffff8801c3d01000 Call Trace: [<ffffffff81299550>] sd_prep_fn+0x80/0x800 [<ffffffff81193a2a>] ? cfq_remove_request+0x14a/0x1d0 [<ffffffff81189b7a>] blk_peek_request+0xca/0x1a0 [<ffffffff81291206>] scsi_request_fn+0x56/0x3e0 [<ffffffff8118934b>] __blk_run_queue+0x6b/0x140 [<ffffffff81186fb4>] elv_insert+0x144/0x1a0 [<ffffffff81187072>] __elv_add_request+0x62/0xc0 [<ffffffff8118a479>] __make_request+0x129/0x3f0 [<ffffffff81188fcf>] generic_make_request+0x19f/0x360 [<ffffffff81188fcf>] ? generic_make_request+0x19f/0x360 [<ffffffff811891f8>] submit_bio+0x68/0xe0 [<ffffffff81328fe4>] md_submit_barrier+0xe4/0x170 [<ffffffff81328f00>] ? md_submit_barrier+0x0/0x170 [<ffffffff8104c81c>] worker_thread+0x12c/0x200 [<ffffffff81050f60>] ? autoremove_wake_function+0x0/0x40 [<ffffffff8104c6f0>] ? worker_thread+0x0/0x200 [<ffffffff81050c8e>] kthread+0x8e/0xa0 [<ffffffff81003cfa>] child_rip+0xa/0x20 [<ffffffff81050c00>] ? kthread+0x0/0xa0 [<ffffffff81003cf0>] ? child_rip+0x0/0x20 Code: 41 5c c9 c3 48 8b 00 48 85 c0 74 b7 48 8b 40 48 48 85 c0 74 ae 4c
89 e6 48 89 df ff d0 85 c0 74 a2 eb dc b0 02 0f 1f 40 00 eb d4 <0f> 0b 0f 1f 40 00 eb fa 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 RIP [<ffffffff81291cda>] scsi_setup_fs_cmnd+0x8a/0xa0
RSP <ffff8801cb88db20>
---[ end trace 64ebbf58ad5b90ce ]---
I have raids 0 and 1, ext3 on the former, LVM+ext3 on the latter. It is 100% reproducible, each time while booting. But even after some services start (opensuse 11.2). Plain singlemode doesn't trigger it. I didn't investigate that further though.
regards,
Signature · 3 lines
js Faculty of Informatics, Masaryk University Suse Labs, Novell
Re: BUG at scsi_lib.c:1108 [Was: mmotm 2009-11-24-16-47 uploaded]
Quoted 5 lines · Jiri Slaby
Quoted 1 line · On 11/25/2009 01:47 AM, [email protected] wrote:
The mm-of-the-moment snapshot 2009-11-24-16-47 has been uploaded to
Hi, I'm hitting the BUG below in the past two -mmotm's (2009-11-24-16-47, 2009-11-17-14-03):
So this looks like some type of bug in the barrier code. What the BUG_ON is saying is that something sent us a REQ_TYPE_FS (which should be a filesystem read or write) with no attached data, so we can't process it.
I've cc'd Jens to see what he thinks.
Could you bisect this to find the offending commit?
Thanks,
James
Quoted 64 lines
kernel BUG at
/home/l/latest/xxx/drivers/scsi/scsi_lib.c:1108! invalid opcode: 0000 [#1] SMP
last sysfs file:/sys/kernel/uevent_seqnum
CPU 1Modules linked in: ath5k ath Pid: 10, comm: events/1 Not tainted 2.6.32-rc8-mm1_64 #905 To Be Filled By O.E.M. RIP: 0010:[<ffffffff81291cda>] [<ffffffff81291cda>] scsi_setup_fs_cmnd+0x8a/0xa0 RSP: 0018:ffff8801cb88db20 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8801c472b800 RCX: ffff8801c403a000 RDX: 0000000001082421 RSI: ffff8801c3d01000 RDI: ffff8801c472b800 RBP: ffff8801cb88db30 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8801c53e68a0 R11: 0000000000000000 R12: ffff8801c3d01000 R13: ffff8801c472b800 R14: 0000000000000000 R15: ffff8801c472b848 FS: 0000000000000000(0000) GS:ffff880028280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00007f401b0065c0 CR3: 00000001c3e03000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process events/1 (pid: 10, threadinfo ffff8801cb88c000, task ffff8801cb864140) Stack: ffff8801c3d01000 ffff8801c53e68a0 ffff8801cb88dba0 ffffffff81299550 <0> ffff8801cb88db90 ffffffff81193a2a ffff8801cb88dba0 ffff8801c403a000 <0> 0000000000000000 ffff8801c4038b60 ffff8801c3d01000 ffff8801c3d01000 Call Trace: [<ffffffff81299550>] sd_prep_fn+0x80/0x800 [<ffffffff81193a2a>] ? cfq_remove_request+0x14a/0x1d0 [<ffffffff81189b7a>] blk_peek_request+0xca/0x1a0 [<ffffffff81291206>] scsi_request_fn+0x56/0x3e0 [<ffffffff8118934b>] __blk_run_queue+0x6b/0x140 [<ffffffff81186fb4>] elv_insert+0x144/0x1a0 [<ffffffff81187072>] __elv_add_request+0x62/0xc0 [<ffffffff8118a479>] __make_request+0x129/0x3f0 [<ffffffff81188fcf>] generic_make_request+0x19f/0x360 [<ffffffff81188fcf>] ? generic_make_request+0x19f/0x360 [<ffffffff811891f8>] submit_bio+0x68/0xe0 [<ffffffff81328fe4>] md_submit_barrier+0xe4/0x170 [<ffffffff81328f00>] ? md_submit_barrier+0x0/0x170 [<ffffffff8104c81c>] worker_thread+0x12c/0x200 [<ffffffff81050f60>] ? autoremove_wake_function+0x0/0x40 [<ffffffff8104c6f0>] ? worker_thread+0x0/0x200 [<ffffffff81050c8e>] kthread+0x8e/0xa0 [<ffffffff81003cfa>] child_rip+0xa/0x20 [<ffffffff81050c00>] ? kthread+0x0/0xa0 [<ffffffff81003cf0>] ? child_rip+0x0/0x20 Code: 41 5c c9 c3 48 8b 00 48 85 c0 74 b7 48 8b 40 48 48 85 c0 74 ae 4c89 e6 48 89 df ff d0 85 c0 74 a2 eb dc b0 02 0f 1f 40 00 eb d4 <0f> 0b 0f 1f 40 00 eb fa 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 RIP [<
ffffffff81291cda>]scsi_setup_fs_cmnd+0x8a/0xa0
RSP <ffff8801cb88db20>---[ end trace 64ebbf58ad5b90ce ]---I have raids 0 and 1, ext3 on the former, LVM+ext3 on the latter. It is 100% reproducible, each time while booting. But even after some services start (opensuse 11.2). Plain singlemode doesn't trigger it. I didn't investigate that further though.
regards,
Re: BUG at scsi_lib.c:1108 [Was: mmotm 2009-11-24-16-47 uploaded]
Quoted 7 lines · James Bottomley
Quoted 5 lines · Jiri Slaby
Quoted 1 line · On 11/25/2009 01:47 AM, [email protected] wrote:
The mm-of-the-moment snapshot 2009-11-24-16-47 has been uploaded to
Hi, I'm hitting the BUG below in the past two -mmotm's (2009-11-24-16-47, 2009-11-17-14-03):
Quoted 7 lines
So this looks like some type of bug in the barrier code. What the
BUG_ONis saying is that something sent us aREQ_TYPE_FS(which should be a filesystem read or write) with no attached data, so we can't process it.I've cc'd Jens to see what he thinks.
Could you bisect this to find the offending commit?
Hmm. I bisected it twice to
commit 1bebedd653e1bb0440ebf40724c55791c21ad7cc
Merge: a8d5ddf 62fa36a
Author: Stephen Rothwell <[email protected]>
Date: Wed Nov 25 17:42:47 2009 +1100
Merge remote branch 'md/for-next'
It doesn't make sense at all. How can empty merge cause a regression? And md/for-next doesn't produce the BUG.
After the 1st bisection I did
git checkout 1bebedd653e1bb0440ebf40724c55791c21ad7cc
and built it. It crashed. Then I did
git bisect start 1bebedd origin/stable
where origin is next. And got back to the 1bebedd by bisection.
Signature · 3 lines
js Faculty of Informatics, Masaryk University Suse Labs, Novell
Re: BUG at scsi_lib.c:1108 [Was: mmotm 2009-11-24-16-47 uploaded]
Quoted 2 lines · On Wed, 25 Nov 2009 21:22:57 +0100 Jiri Slaby <[email protected]> wrote:
It doesn't make sense at all. How can empty merge cause a regression? And md/for-next doesn't produce the BUG.
I've hit that situation before. Two separate changes in separate branches conspire to cause a problem.
md/for-next contains code to handle barriers properly for all levels, not just RAID1.
It is possible I got this wrong in some way, and some new sanity check in a separate branch is firing, or it is possible some other bug in barrier handling has been added and now that MD sends barriers, it is being triggered.
What I did to find the actual offending patches is to got to one of the heads just before the merge, and cherry-pick all the patches from the other branch, and then bisect that.
NeilBrown
Re: BUG at scsi_lib.c:1108 [Was: mmotm 2009-11-24-16-47 uploaded]
Quoted 16 lines · Neil Brown
Quoted 2 lines · On Wed, 25 Nov 2009 21:22:57 +0100 Jiri Slaby <[email protected]> wrote:
It doesn't make sense at all. How can empty merge cause a regression? And md/for-next doesn't produce the BUG.
I've hit that situation before. Two separate changes in separate branches conspire to cause a problem.
md/for-next contains code to handle barriers properly for all levels, not just RAID1.
It is possible I got this wrong in some way, and some new sanity check in a separate branch is firing, or it is possible some other bug in barrier handling has been added and now that MD sends barriers, it is being triggered.
Quoted 4 lines
What I did to find the actual offending patches is to got to one of the heads just before the merge, and cherry-pick all the patches from the other branch, and then bisect that.
cherry-pick is hard work.
Stand on the merge point and do:
git rebase -i HEAD^
That will cherry-pick all these for you in one easy command ;-)
Boaz
Quoted 5 lines
NeilBrown
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: BUG at scsi_lib.c:1108 [Was: mmotm 2009-11-24-16-47 uploaded]
In reply to Neil BrownQuoted 9 lines · On Thu, 26 Nov 2009 08:13:59 +1100 Neil Brown <[email protected]> wrote:
Quoted 2 lines · On Wed, 25 Nov 2009 21:22:57 +0100 Jiri Slaby <[email protected]> wrote:
It doesn't make sense at all. How can empty merge cause a regression? And md/for-next doesn't produce the BUG.
I've hit that situation before. Two separate changes in separate branches conspire to cause a problem.
Quoted 6 lines
md/for-next contains code to handle barriers properly for all levels, not just RAID1.
It is possible I got this wrong in some way, and some new sanity check in a separate branch is firing, or it is possible some other bug in barrier handling has been added and now that MD sends barriers, it is being triggered.
And it looks like I did get it wrong in some way. I handled a barrier by:
- send an empty barrier to each component
- schedule to write with the barrier flag cleared
- send another empty barrier
If an empty barrier is received, step 2 sends an empty non-barrier, which caused the BUG.
I have revised the code to special case empty barriers and only perform the first step.
This should appear in the next -next.
Thanks,
NeilBrown
Re: BUG at scsi_lib.c:1108 [Was: mmotm 2009-11-24-16-47 uploaded]
Quoted 5 lines · Neil Brown
If an empty barrier is received, step 2 sends an empty non-barrier, which caused the BUG.
I have revised the code to special case empty barriers and only perform the first step.
This should appear in the next -next.
Yup, it works (with the patch attached). Thanks.
Signature · 1 line
js
Quoted 1 line
From
d2ab5e2d06602b79b4c06208fd1ee492a32c983fMon Sep 17 00:00:00 2001
From: Jiri Slaby <[email protected]>
Date: Fri, 27 Nov 2009 11:08:28 +0100
Subject: [PATCH] raid fixup
--- drivers/md/md.c | 56 ++++++++++++++++++++++++++++++++++++++++----------- drivers/md/raid5.c | 3 ++ fs/compat_ioctl.c | 22 -------------------- 3 files changed, 47 insertions(+), 34 deletions(-)
drivers/md/md.c +44 -12
@@ -44,6 +44,7 @@#include <linux/random.h> #include <linux/reboot.h> #include <linux/file.h> +#include <linux/compat.h> #include <linux/delay.h> #include <linux/raid/md_p.h> #include <linux/raid/md_u.h>
@@ -287,9 +288,11 @@ static void md_end_barrier(struct bio *bio, int err)if (atomic_dec_and_test (&mddev->flush_pending)) {if (mddev->barrier == (void *)1 ) { +/* This was a post-request barrier */ mddev->barrier =NULL ;wake_up (&mddev->sb_wait); }else +/* The pre-request barrier has finished */ schedule_work (&mddev->barrier_work); }bio_put (bio);
@@ -302,10 +305,16 @@ static void md_submit_barrier(struct work_struct *ws)atomic_set (&mddev->flush_pending,1 ); -if (!test_bit (BIO_EOPNOTSUPP , &bio->bi_flags)) { +if (test_bit (BIO_EOPNOTSUPP , &bio->bi_flags)) +bio_endio (bio, -EOPNOTSUPP ); +else if (bio->bi_size ==0 ) +/* an empty barrier - all done */ +bio_endio (bio,0 ); +else {mdk_rdev_t *rdev; bio->bi_rw &= ~(1 <<BIO_RW_BARRIER ); + bio->bi_rw |= (1 <<BIO_RW_SYNCIO );if (mddev->pers->make_request (mddev->queue, bio))generic_make_request (bio); mddev->barrier = (void *)1 ;
@@ -331,8 +340,7 @@ static void md_submit_barrier(struct work_struct *ws)rdev_dec_pending (rdev, mddev); }rcu_read_unlock (); - }else -bio_endio (bio, -EOPNOTSUPP ); + }if (atomic_dec_and_test (&mddev->flush_pending)) { mddev->barrier =NULL ;wake_up (&mddev->sb_wait);
@@ -1512,12 +1520,10 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev)if (rdev->raid_disk >=0 && !test_bit (In_sync, &rdev->flags)) { -if (rdev->recovery_offset >0 ) { - sb->feature_map |= -cpu_to_le32 (MD_FEATURE_RECOVERY_OFFSET ); - sb->recovery_offset = -cpu_to_le64 (rdev->recovery_offset); - } + sb->feature_map |= +cpu_to_le32 (MD_FEATURE_RECOVERY_OFFSET ); + sb->recovery_offset = +cpu_to_le64 (rdev->recovery_offset); }if (mddev->reshape_position != MaxSector) {
@@ -1551,7 +1557,7 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev) sb->dev_roles[i] =cpu_to_le16 (0xfffe ); else if (test_bit(In_sync, &rdev2->flags)) sb->dev_roles[i] = cpu_to_le16(rdev2->raid_disk); - else if (rdev2->raid_disk >= 0 && rdev2->recovery_offset > 0) + else if (rdev2->raid_disk >= 0) sb->dev_roles[i] = cpu_to_le16(rdev2->raid_disk); else sb->dev_roles[i] = cpu_to_le16(0xffff);
@@ -5663,6 +5669,25 @@ done: abort:return err; } +#ifdef CONFIG_COMPAT +static int md_compat_ioctl (struct block_device *bdev,fmode_t mode, +unsigned int cmd,unsigned long arg) +{ +switch (cmd) { +case HOT_REMOVE_DISK : +case HOT_ADD_DISK : +case SET_DISK_FAULTY : +case SET_BITMAP_FILE : +/* These take in integer arg, do not convert */ +break ; +default : + arg = (unsigned long )compat_ptr (arg); +break ; + } + +return md_ioctl (bdev, mode, cmd, arg); +} +#endif /* CONFIG_COMPAT */ static int md_open (struct block_device *bdev,fmode_t mode) {
@@ -5728,6 +5753,9 @@ static const struct block_device_operations md_fops = .open = md_open, .release = md_release, .ioctl = md_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = md_compat_ioctl, +#endif .getgeo = md_getgeo, .media_changed = md_media_changed, .revalidate_disk= md_revalidate,
@@ -6518,7 +6546,9 @@ void md_do_sync(mddev_t *mddev)"md: resuming %s of %s from checkpoint.\n" , desc, mdname(mddev)); mddev->curr_resync = j; - } + mddev->curr_resync_completed = j; + }else + mddev->curr_resync_completed =0 ;while (j < max_sectors) {sector_t sectors;
@@ -6670,7 +6700,8 @@ void md_do_sync(mddev_t *mddev) }else if (test_bit (MD_RECOVERY_REQUESTED , &mddev->recovery)) mddev->resync_min = mddev->curr_resync_completed; mddev->curr_resync =0 ; - mddev->curr_resync_completed =0 ; +if (!test_bit (MD_RECOVERY_INTR , &mddev->recovery)) + mddev->curr_resync_completed =0 ;sysfs_notify (&mddev->kobj,NULL ,"sync_completed" );wake_up (&resync_wait);set_bit (MD_RECOVERY_DONE , &mddev->recovery);
@@ -6733,6 +6764,7 @@ static int remove_and_add_spares(mddev_t *mddev) nm, mdname(mddev)); spares++;md_new_event (mddev); +set_bit (MD_CHANGE_DEVS , &mddev->flags); }else break ; }
drivers/md/raid5.c +3 -0
@@ -3996,6 +3996,9 @@ static int make_request(struct request_queue *q, struct bio * bi)finish_wait (&conf->wait_for_overlap, &w);set_bit (STRIPE_HANDLE , &sh->state);clear_bit (STRIPE_DELAYED , &sh->state); +if ((bi->bi_rw & (1 <<BIO_RW_SYNCIO )) && + !test_and_set_bit (STRIPE_PREREAD_ACTIVE , &sh->state)) +atomic_inc (&conf->preread_active_stripes);release_stripe (sh); }else {/* cannot get stripe for read-ahead, just give-up */
fs/compat_ioctl.c +0 -22
@@ -1089,28 +1089,6 @@ COMPATIBLE_IOCTL(FIGETBSZ)/* 'X' - originally XFS but some now in the VFS */ COMPATIBLE_IOCTL(FIFREEZE) COMPATIBLE_IOCTL(FITHAW) -/* RAID */ -COMPATIBLE_IOCTL(RAID_VERSION) -COMPATIBLE_IOCTL(GET_ARRAY_INFO) -COMPATIBLE_IOCTL(GET_DISK_INFO) -COMPATIBLE_IOCTL(PRINT_RAID_DEBUG) -COMPATIBLE_IOCTL(RAID_AUTORUN) -COMPATIBLE_IOCTL(CLEAR_ARRAY) -COMPATIBLE_IOCTL(ADD_NEW_DISK) -ULONG_IOCTL(HOT_REMOVE_DISK) -COMPATIBLE_IOCTL(SET_ARRAY_INFO) -COMPATIBLE_IOCTL(SET_DISK_INFO) -COMPATIBLE_IOCTL(WRITE_RAID_INFO) -COMPATIBLE_IOCTL(UNPROTECT_ARRAY) -COMPATIBLE_IOCTL(PROTECT_ARRAY) -ULONG_IOCTL(HOT_ADD_DISK) -ULONG_IOCTL(SET_DISK_FAULTY) -COMPATIBLE_IOCTL(RUN_ARRAY) -COMPATIBLE_IOCTL(STOP_ARRAY) -COMPATIBLE_IOCTL(STOP_ARRAY_RO) -COMPATIBLE_IOCTL(RESTART_ARRAY_RW) -COMPATIBLE_IOCTL(GET_BITMAP_FILE) -ULONG_IOCTL(SET_BITMAP_FILE) /* Keyboard -- can be removed once tty3270 uses ops->compat_ioctl */ ULONG_IOCTL(KDSIGACCEPT) COMPATIBLE_IOCTL(KDGETKEYCODE)
Signature · 1 line
1.6.5.3
Re: mmotm 2009-11-24-16-47 uploaded (gpio_max7301)
In reply to [email protected]Quoted 11 lines · [email protected] wrote:
The mm-of-the-moment snapshot 2009-11-24-16-47 has been uploaded to
http://userweb.kernel.org/~akpm/mmotm/
and will soon be available at
git://git.zen-sources.org/zen/mmotm.gitIt contains the following patches against 2.6.32-rc8:
gpio-add-driver-for-max7300-i2c-gpio-extender.patch
This driver has build failures when CONFIG_I2C=m and MAX7301=y, MAX7301_I2C=y, MAX7301_SPI=y:
drivers/built-in.o: In function `max7301_i2c_write':
max7301.c:(.text+0x2d9e): undefined reference to i2c_smbus_write_byte_data' drivers/built-in.o: In function max7301_i2c_read':
max7301.c:(.text+0x2dc6): undefined reference to i2c_smbus_read_byte_data' drivers/built-in.o: In function max7301_init':
max7301.c:(.init.text+0x42e): undefined reference to i2c_register_driver' max7301.c:(.init.text+0x496): undefined reference to i2c_del_driver' drivers/built-in.o: In function `max7301_exit':
max7301.c:(.exit.text+0x14): undefined reference to `i2c_del_driver'
This kconfig syntax:
config GPIO_MAX7301
tristate "Maxim MAX730x GPIO expander"
depends on I2C || SPI_MASTERallows GPIO_MAX7301 to be y when SPI_MASTER=y and I2C=m. If you want to do that, you'll need to handle CONFIG_I2C=m somehow.
Signature · 1 line
~Randy
Re: mmotm 2009-11-24-16-47 uploaded (gpio_max7301)
Quoted 15 lines
This driver has build failures when
CONFIG_I2C=mand MAX7301=y, MAX7301_I2C=y, MAX7301_SPI=y:
drivers/built-in.o: In function `max7301_i2c_write':
max7301.c:(.text+0x2d9e): undefined reference toi2c_smbus_write_byte_data' drivers/built-in.o: In functionmax7301_i2c_read':
max7301.c:(.text+0x2dc6): undefined reference toi2c_smbus_read_byte_data' drivers/built-in.o: In functionmax7301_init':
max7301.c:(.init.text+0x42e): undefined reference toi2c_register_driver' max7301.c:(.init.text+0x496): undefined reference toi2c_del_driver'drivers/built-in.o: In function `max7301_exit':
max7301.c:(.exit.text+0x14): undefined reference to `i2c_del_driver'
Quoted 8 lines
This kconfig syntax:
config
GPIO_MAX7301tristate "Maxim MAX730x GPIO expander" depends on I2C || SPI_MASTERallows
GPIO_MAX7301to be y when SPI_MASTER=y and I2C=m. If you want to do that, you'll need to handleCONFIG_I2C=msomehow.
ACK, will fix it.
Signature · 2 lines
Pengutronix e.K. | Wolfram Sang | Industrial Linux Solutions | http://www.pengutronix.de/ |
Re: mmotm 2009-11-24-16-47 uploaded (gpio_max7301)
In reply to Randy DunlapQuoted 27 lines · On Wed, 25 Nov 2009 17:46:38 -0800 Randy Dunlap <[email protected]> wrote:
Quoted 11 lines · [email protected] wrote:
The mm-of-the-moment snapshot 2009-11-24-16-47 has been uploaded to
http://userweb.kernel.org/~akpm/mmotm/
and will soon be available at
git://git.zen-sources.org/zen/mmotm.gitIt contains the following patches against 2.6.32-rc8:
gpio-add-driver-for-max7300-i2c-gpio-extender.patch
This driver has build failures when
CONFIG_I2C=mand MAX7301=y, MAX7301_I2C=y, MAX7301_SPI=y:
drivers/built-in.o: In function `max7301_i2c_write':
max7301.c:(.text+0x2d9e): undefined reference toi2c_smbus_write_byte_data' drivers/built-in.o: In functionmax7301_i2c_read':
max7301.c:(.text+0x2dc6): undefined reference toi2c_smbus_read_byte_data' drivers/built-in.o: In functionmax7301_init':
max7301.c:(.init.text+0x42e): undefined reference toi2c_register_driver' max7301.c:(.init.text+0x496): undefined reference toi2c_del_driver'drivers/built-in.o: In function `max7301_exit':
max7301.c:(.exit.text+0x14): undefined reference to `i2c_del_driver'
Quoted 9 lines
This kconfig syntax:
config
GPIO_MAX7301tristate "Maxim MAX730x GPIO expander" depends on I2C || SPI_MASTERallows
GPIO_MAX7301to be y when SPI_MASTER=y and I2C=m. If you want to do that, you'll need to handleCONFIG_I2C=msomehow.
fyi, I have this patch "on hold" due to this issue.
Re: mmotm 2009-11-24-16-47 uploaded (gpio_max7301)
Quoted 36 lines · On Tue, 15 Dec 2009 14:43:06 -0800 Andrew Morton wrote:
Quoted 33 lines · On Wed, 25 Nov 2009 17:46:38 -0800 Randy Dunlap <[email protected]> wrote:
Quoted 11 lines · [email protected] wrote:
The mm-of-the-moment snapshot 2009-11-24-16-47 has been uploaded to
http://userweb.kernel.org/~akpm/mmotm/
and will soon be available at
git://git.zen-sources.org/zen/mmotm.gitIt contains the following patches against 2.6.32-rc8:
gpio-add-driver-for-max7300-i2c-gpio-extender.patch
This driver has build failures when
CONFIG_I2C=mand MAX7301=y, MAX7301_I2C=y, MAX7301_SPI=y:
drivers/built-in.o: In function `max7301_i2c_write':
max7301.c:(.text+0x2d9e): undefined reference toi2c_smbus_write_byte_data' drivers/built-in.o: In functionmax7301_i2c_read':
max7301.c:(.text+0x2dc6): undefined reference toi2c_smbus_read_byte_data' drivers/built-in.o: In functionmax7301_init':
max7301.c:(.init.text+0x42e): undefined reference toi2c_register_driver' max7301.c:(.init.text+0x496): undefined reference toi2c_del_driver'drivers/built-in.o: In function `max7301_exit':
max7301.c:(.exit.text+0x14): undefined reference to `i2c_del_driver'This kconfig syntax:
config
GPIO_MAX7301tristate "Maxim MAX730x GPIO expander" depends on I2C || SPI_MASTER
Quoted 5 lines
Quoted 3 lines
allows
GPIO_MAX7301to be y when SPI_MASTER=y and I2C=m. If you want to do that, you'll need to handleCONFIG_I2C=msomehow.fyi, I have this patch "on hold" due to this issue.
Wolfram sent a large replacement patch on Sun Dec. 13:
Subject: [PATCH V4] gpio: add driver for MAX7300 I2C GPIO extender
---
~Randy
Re: mmotm 2009-11-24-16-47 uploaded (gpio_max7301)
Quoted 38 lines · On Tue, 15 Dec 2009 14:46:43 -0800 Randy Dunlap <[email protected]> wrote:
Quoted 36 lines · On Tue, 15 Dec 2009 14:43:06 -0800 Andrew Morton wrote:
Quoted 33 lines · On Wed, 25 Nov 2009 17:46:38 -0800 Randy Dunlap <[email protected]> wrote:
Quoted 11 lines · [email protected] wrote:
The mm-of-the-moment snapshot 2009-11-24-16-47 has been uploaded to
http://userweb.kernel.org/~akpm/mmotm/
and will soon be available at
git://git.zen-sources.org/zen/mmotm.gitIt contains the following patches against 2.6.32-rc8:
gpio-add-driver-for-max7300-i2c-gpio-extender.patch
This driver has build failures when
CONFIG_I2C=mand MAX7301=y, MAX7301_I2C=y, MAX7301_SPI=y:
drivers/built-in.o: In function `max7301_i2c_write':
max7301.c:(.text+0x2d9e): undefined reference toi2c_smbus_write_byte_data' drivers/built-in.o: In functionmax7301_i2c_read':
max7301.c:(.text+0x2dc6): undefined reference toi2c_smbus_read_byte_data' drivers/built-in.o: In functionmax7301_init':
max7301.c:(.init.text+0x42e): undefined reference toi2c_register_driver' max7301.c:(.init.text+0x496): undefined reference toi2c_del_driver'drivers/built-in.o: In function `max7301_exit':
max7301.c:(.exit.text+0x14): undefined reference to `i2c_del_driver'This kconfig syntax:
config
GPIO_MAX7301tristate "Maxim MAX730x GPIO expander" depends on I2C || SPI_MASTER
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
allows
GPIO_MAX7301to be y when SPI_MASTER=y and I2C=m. If you want to do that, you'll need to handleCONFIG_I2C=msomehow.fyi, I have this patch "on hold" due to this issue.
Wolfram sent a large replacement patch on Sun Dec. 13:
Subject: [PATCH V4] gpio: add driver for MAX7300 I2C GPIO extender
So he did, thanks.
Wolfram, the V4 patch doesn't have a usable changelog. Please send one along sometime?
Re: mmotm 2009-11-24-16-47 uploaded (gpio_max7301)
Quoted 7 lines
Quoted 2 lines
Wolfram sent a large replacement patch on Sun Dec. 13:
Subject: [PATCH V4] gpio: add driver for MAX7300 I2C GPIO extenderSo he did, thanks.
Wolfram, the V4 patch doesn't have a usable changelog. Please send one along sometime?
Sure, will do. I am just not entirely sure what you mean with "changelog"? The changelog for V4? The whole changelog from V1 to V4? The patch description? All of them? :)
Regards,
Wolfram
Signature · 2 lines
Pengutronix e.K. | Wolfram Sang | Industrial Linux Solutions | http://www.pengutronix.de/ |
ugly sound output (intel-hda) [was: mmotm 2009-11-24-16-47 uploaded]
In reply to [email protected]Quoted 1 line · On 11/25/2009 01:47 AM, [email protected] wrote:
The mm-of-the-moment snapshot 2009-11-24-16-47 has been uploaded to
Hi, when I boot into that kernel, I hear, since the boot phase, short scratches repeatedly every (just a guess) 100 ms.
# cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xffa74000 irq 29# cat /proc/asound/card0/codec#2
Codec: SigmaTel STAC9274D
Address: 2
Function Id: 0x1
Vendor Id: 0x83847621
Subsystem Id: 0x00000100
Revision Id: 0x100201
No Modem Function Group found
Default PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=0
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
GPIO: io=3, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Analog Loopback: 0x00
Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Front Playback Volume", index=0, device=0
Control: name="Front Playback Switch", index=0, device=0
Device: name="STAC92xx Analog", type="Audio", device=0
Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Side Playback Volume", index=0, device=0
Control: name="Side Playback Switch", index=0, device=0
Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Center Playback Volume", index=0, device=0
Control: name="Center Playback Switch", index=0, device=0
Control: name="LFE Playback Volume", index=0, device=0
Control: name="LFE Playback Switch", index=0, device=0
Control: name="Swap Center/LFE Playback Switch", index=0, device=0
Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=4
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Surround Playback Volume", index=0, device=0
Control: name="Surround Playback Switch", index=0, device=0
Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=2
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x06 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Headphone Playback Volume", index=0, device=0
Control: name="Headphone Playback Switch", index=0, device=0
Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo
Device: name="STAC92xx Analog", type="Audio", device=0
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x1b
Processing caps: benign=0, ncoeff=0
Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x1c
Processing caps: benign=0, ncoeff=0
Node 0x09 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x1d
Processing caps: benign=0, ncoeff=0
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x02214020: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=01, enabled=1
Connection: 3
0x02 0x03 0x06*
Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
Control: name="Front Mic Jack Mode", index=0, device=0
Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x02a19080: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0x8, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=03, enabled=1
Connection: 3
0x02* 0x03 0x06
Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
Control: name="Line Jack Mode", index=0, device=0
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x0181304e: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0x4, Sequence = 0xe
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=04, enabled=1
Connection: 1
0x03
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
Control: name="Mic Jack Mode", index=0, device=0
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x01a19040: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=02, enabled=1
Connection: 1
0x04
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x01011012: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0x2
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x05
Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00000037: IN OUT Detect Trigger ImpSense
Pin Default 0x01016011: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Orange
DefAssociation = 0x1, Sequence = 0x1
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x04
Node 0x11 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00000037: IN OUT Detect Trigger ImpSense
Pin Default 0x01012014: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Grey
DefAssociation = 0x1, Sequence = 0x4
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x03
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x503301f0: [N/A] CD at Int N/A
Conn = ATAPI, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x13 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x50a001f0: [N/A] Mic at Int N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x14 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x50a001f0: [N/A] Mic at Int N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Mux Capture Volume", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Mux Capture Volume", index=1, device=0
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Mux Capture Volume", index=2, device=0
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x18 [Audio Selector] wcaps 0x300103: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
Amp-In caps: N/A
Amp-In vals: [0x08 0x08]
Connection: 1
0x15
Node 0x19 [Audio Selector] wcaps 0x300103: Stereo Amp-In
Control: name="Capture Volume", index=1, device=0
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x16
Node 0x1a [Audio Selector] wcaps 0x300103: Stereo Amp-In
Control: name="Capture Volume", index=2, device=0
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x17
Node 0x1b [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Control: name="Capture Switch", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 3
0x18* 0x13 0x14
Node 0x1c [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Control: name="Capture Switch", index=1, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 3
0x19* 0x13 0x14
Node 0x1d [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Control: name="Capture Switch", index=2, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 3
0x1a* 0x13 0x14
Node 0x1e [Audio Output] wcaps 0x40211: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Device: name="STAC92xx Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Node 0x1f [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Delay: 3 samples
Node 0x20 [Audio Input] wcaps 0x140311: Stereo Digital
Device: name="STAC92xx Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Connection: 1
0x22
Node 0x21 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x01442170: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Grey
DefAssociation = 0x7, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 5
0x1e* 0x1f 0x1b 0x1c 0x1d
Node 0x22 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x00010024: IN EAPD Detect
EAPD 0x0:
Pin Default 0x81c42090: [Fixed] SPDIF In at Ext Rear
Conn = RCA, Color = Grey
DefAssociation = 0x9, Sequence = 0x0
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Delay: 3 samples
Node 0x23 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
Amp-Out vals: [0x00]
Node 0x24 [Volume Knob Widget] wcaps 0x600000: Mono
Volume-Knob: delta=1, steps=127, direct=1, val=127
Connection: 5
0x02 0x03 0x04 0x05 0x06It's a regression against, I think, 2009-11-13-19-59.
thanks,
Signature · 1 line
js
Re: ugly sound output (intel-hda) [was: mmotm 2009-11-24-16-47 uploaded]
At Fri, 27 Nov 2009 11:33:36 +0100,
Quoted 4 lines · Jiri Slaby
Quoted 1 line · On 11/25/2009 01:47 AM, [email protected] wrote:
The mm-of-the-moment snapshot 2009-11-24-16-47 has been uploaded to
Quoted 8 lines
Hi, when I boot into that kernel, I hear, since the boot phase, short scratches repeatedly every (just a guess) 100 ms.
# cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xffa74000 irq 29# cat /proc/asound/card0/codec#2
Could you give rather alsa-info.sh output (run with --no-upload option)?
Quoted 1 line
It's a regression against, I think, 2009-11-13-19-59.
There aren't so many fundamental changes since Nov. 13.
The major ones are for Intel HDMI, but it should be irrelevant in your case.
The changes in patch_sigmatel.c since then are:
d56757abc11a21996d9839c0d4e3b2c3666cd318
ALSA: hda - Replace the rest of jack-detections with snd_hda_jack_detect()
8af3aeb498197f6fdf5acc913ffe8a392cb921c9
ALSA: hda - Fix detection of dual headphones
b4e818768d50a5b7aa1635676839682bcf0691b6
ALSA: hda - Fix mute-LED sync on HP laptops with IDT92HD83xxx codecs
Could you try to revert them? The patches are found in sound git tree
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
or linux-next.
thanks,
Takashi
Re: ugly sound output (intel-hda) [was: mmotm 2009-11-24-16-47 uploaded]
Quoted 1 line · Takashi Iwai
Could you give rather
alsa-info.shoutput (run with --no-upload option)?
Yup, attached.
Quoted 10 lines
Quoted 1 line
It's a regression against, I think, 2009-11-13-19-59.
There aren't so many fundamental changes since Nov. 13.
The major ones are for Intel HDMI, but it should be irrelevant in your case.The changes in
patch_sigmatel.csince then are:
d56757abc11a21996d9839c0d4e3b2c3666cd318
ALSA: hda - Replace the rest of jack-detections withsnd_hda_jack_detect()
commit 99dee933c33b63da4339bccc092b69b053fe055a
Author: Jiri Slaby <[email protected]> Date: Fri Nov 27 11:51:13 2009 +0100
Revert "ALSA: hda - Replace the rest of jack-detections withsnd_hda_jack_detect()"
This reverts commit d56757abc11a21996d9839c0d4e3b2c3666cd318.
Makes the difference :).
thanks,
Signature · 1 line
js
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.58
!!################################
!!Script ran on: Fri Nov 27 11:05:42 UTC 2009
!!Linux Distribution
!!------------------
Welcome to openSUSE 11.2 "Emerald" - Kernel \r (\l). openSUSE 11.2 (x86_64) LSB_VERSION="core-2.0-noarch:core-3.2-noarch:core-4.0-noarch:core-2.0-x86_64:core-3.2-x86_64:core-4.0-x86_64"
!!DMI Information
!!---------------
Manufacturer: To Be Filled By O.E.M. Product Name: To Be Filled By O.E.M.
!!Kernel Information
!!------------------
Kernel release: 2.6.32-rc8-mm1_64 Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.21
Library version:
Utilities version: 1.0.21
!!Loaded ALSA modules
!!-------------------
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
aRts:
Installed - Yes (/opt/kde3/bin/artsd)
Running - No
!!Soundcards recognised by ALSA
!!-----------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xffa74000 irq 29
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
!!Advanced information - PCI Vendor/Device/Susbsystem ID's !!--------------------------------------------------------
00:1b.0 0403: 8086:293e (rev 02)
Subsystem: 8086:293e
!!Loaded sound module options
!!--------------------------
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: SigmaTel STAC9274D
Address: 2
Function Id: 0x1
Vendor Id: 0x83847621
Subsystem Id: 0x00000100
Revision Id: 0x100201
No Modem Function Group found
Default PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=0 Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
GPIO: io=3, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Analog Loopback: 0x00
Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Front Playback Volume", index=0, device=0
Control: name="Front Playback Switch", index=0, device=0
Device: name="STAC92xx Analog", type="Audio", device=0 Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Side Playback Volume", index=0, device=0
Control: name="Side Playback Switch", index=0, device=0 Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Center Playback Volume", index=0, device=0
Control: name="Center Playback Switch", index=0, device=0
Control: name="LFE Playback Volume", index=0, device=0
Control: name="LFE Playback Switch", index=0, device=0
Control: name="Swap Center/LFE Playback Switch", index=0, device=0 Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=4
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Surround Playback Volume", index=0, device=0
Control: name="Surround Playback Switch", index=0, device=0 Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=2
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x06 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Headphone Playback Volume", index=0, device=0
Control: name="Headphone Playback Switch", index=0, device=0 Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo
Device: name="STAC92xx Analog", type="Audio", device=0
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x1b
Processing caps: benign=0, ncoeff=0
Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x1c
Processing caps: benign=0, ncoeff=0
Node 0x09 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x1d
Processing caps: benign=0, ncoeff=0
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x02214020: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=01, enabled=1
Connection: 3
0x02 0x03 0x06*
Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
Control: name="Front Mic Jack Mode", index=0, device=0 Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x02a19080: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0x8, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=03, enabled=1
Connection: 3
0x02* 0x03 0x06
Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
Control: name="Line Jack Mode", index=0, device=0 Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x0181304e: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0x4, Sequence = 0xe
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=04, enabled=1
Connection: 1
0x03
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
Control: name="Mic Jack Mode", index=0, device=0 Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x01a19040: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=02, enabled=1
Connection: 1
0x04
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x01011012: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0x2
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x05
Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00000037: IN OUT Detect Trigger ImpSense Pin Default 0x01016011: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Orange
DefAssociation = 0x1, Sequence = 0x1
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x04
Node 0x11 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00000037: IN OUT Detect Trigger ImpSense Pin Default 0x01012014: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Grey
DefAssociation = 0x1, Sequence = 0x4
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x03
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x503301f0: [N/A] CD at Int N/A
Conn = ATAPI, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x13 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x50a001f0: [N/A] Mic at Int N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x14 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x50a001f0: [N/A] Mic at Int N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Mux Capture Volume", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Mux Capture Volume", index=1, device=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Mux Capture Volume", index=2, device=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x18 [Audio Selector] wcaps 0x300103: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0 Amp-In caps: N/A
Amp-In vals: [0x08 0x08]
Connection: 1
0x15
Node 0x19 [Audio Selector] wcaps 0x300103: Stereo Amp-In
Control: name="Capture Volume", index=1, device=0 Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x16
Node 0x1a [Audio Selector] wcaps 0x300103: Stereo Amp-In
Control: name="Capture Volume", index=2, device=0 Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x17
Node 0x1b [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Control: name="Capture Switch", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Connection: 3
0x18* 0x13 0x14
Node 0x1c [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Control: name="Capture Switch", index=1, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Connection: 3
0x19* 0x13 0x14
Node 0x1d [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Control: name="Capture Switch", index=2, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Connection: 3
0x1a* 0x13 0x14
Node 0x1e [Audio Output] wcaps 0x40211: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Device: name="STAC92xx Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3 Delay: 4 samples
Node 0x1f [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Delay: 3 samples
Node 0x20 [Audio Input] wcaps 0x140311: Stereo Digital
Device: name="STAC92xx Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Connection: 1
0x22Node 0x21 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x01442170: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Grey
DefAssociation = 0x7, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 5
0x1e* 0x1f 0x1b 0x1c 0x1d
Node 0x22 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x00010024: IN EAPD Detect
EAPD 0x0:
Pin Default 0x81c42090: [Fixed] SPDIF In at Ext Rear
Conn = RCA, Color = Grey
DefAssociation = 0x9, Sequence = 0x0
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Delay: 3 samples
Node 0x23 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0 Amp-Out vals: [0x00]
Node 0x24 [Volume Knob Widget] wcaps 0x600000: Mono
Volume-Knob: delta=1, steps=127, direct=1, val=127
Connection: 5
0x02 0x03 0x04 0x05 0x06
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 0 Nov 27 12:03 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 24 Nov 27 12:03 /dev/snd/pcmC0D0c crw-rw----+ 1 root audio 116, 16 Nov 27 12:03 /dev/snd/pcmC0D0p crw-rw----+ 1 root audio 116, 25 Nov 27 12:03 /dev/snd/pcmC0D1c crw-rw----+ 1 root audio 116, 17 Nov 27 12:03 /dev/snd/pcmC0D1p crw-rw----+ 1 root audio 116, 1 Nov 27 12:03 /dev/snd/seq crw-rw----+ 1 root audio 116, 33 Nov 27 12:03 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Nov 27 12:03 .
drwxr-xr-x 3 root root 200 Nov 27 12:03 ..
lrwxrwxrwx 1 root root 12 Nov 27 12:03 pci-0000:00:1b.0 -> ../controlC0
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 3/3
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0xffa74000 irq 29'
Mixer name : 'SigmaTel STAC9274D'
Components : 'HDA:83847621,00000100,00100201'
Controls : 37
Simple ctrls : 24
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 40 [62%] [-18.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 254 [100%] [0.20dB]
Front Right: Playback 254 [100%] [0.20dB]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Front Mic Jack Mode',0
Capabilities: enum
Items: 'Mic In' 'Line In'
Item0: 'Mic In'
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Side',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Line Jack Mode',0
Capabilities: enum
Items: 'Mic In' 'Line In'
Item0: 'Line In'
Simple mixer control 'Mic Jack Mode',0
Capabilities: enum
Items: 'Mic In' 'Line In'
Item0: 'Mic In'
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Playback Source',0
Capabilities: enum
Items: 'Digital Playback' 'ADAT' 'Analog Mux 1' 'Analog Mux 2' 'Analog Mux 3'
Item0: 'Digital Playback'
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 8 [57%] [12.00dB] [on]
Front Right: Capture 8 [57%] [12.00dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 0 [0%] [0.00dB] [off]
Front Right: Capture 0 [0%] [0.00dB] [off]
Simple mixer control 'Capture',2
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 0 [0%] [0.00dB] [off]
Front Right: Capture 0 [0%] [0.00dB] [off]
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Line'
Item0: 'Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Line'
Item0: 'Mic'
Simple mixer control 'Input Source',2
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Line'
Item0: 'Mic'
Simple mixer control 'Mux',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 0 [0%] [0.00dB]
Front Right: Capture 0 [0%] [0.00dB]
Simple mixer control 'Mux',1
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 0 [0%] [0.00dB]
Front Right: Capture 0 [0%] [0.00dB]
Simple mixer control 'Mux',2
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 0 [0%] [0.00dB]
Front Right: Capture 0 [0%] [0.00dB]
Simple mixer control 'Swap Center/LFE',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
!!Alsactl output
!!-------------
--startcollapse--
state.Intel {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
comment.dbmin -4800
comment.dbmax 0
iface MIXER
name 'Front Playback Volume'
value.0 64
value.1 64
}
control.2 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Front Playback Switch'
value.0 true
value.1 true
}
control.3 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
comment.dbmin -4800
comment.dbmax 0
iface MIXER
name 'Surround Playback Volume'
value.0 64
value.1 64
}
control.4 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Surround Playback Switch'
value.0 true
value.1 true
}
control.5 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 64'
comment.dbmin -4800
comment.dbmax 0
iface MIXER
name 'Center Playback Volume'
value 64
}
control.6 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Center Playback Switch'
value true
}
control.7 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 64'
comment.dbmin -4800
comment.dbmax 0
iface MIXER
name 'LFE Playback Volume'
value 64
}
control.8 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'LFE Playback Switch'
value true
}
control.9 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Swap Center/LFE Playback Switch'
value false
}
control.10 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
comment.dbmin -4800
comment.dbmax 0
iface MIXER
name 'Side Playback Volume'
value.0 64
value.1 64
}
control.11 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Side Playback Switch'
value.0 true
value.1 true
}
control.12 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 'Mic In'
comment.item.1 'Line In'
iface MIXER
name 'Mic Jack Mode'
value 'Mic In'
}
control.13 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 'Mic In'
comment.item.1 'Line In'
iface MIXER
name 'Front Mic Jack Mode'
value 'Mic In'
}
control.14 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 'Mic In'
comment.item.1 'Line In'
iface MIXER
name 'Line Jack Mode'
value 2
}
control.15 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
comment.dbmin -4800
comment.dbmax 0
iface MIXER
name 'Headphone Playback Volume'
value.0 64
value.1 64
}
control.16 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
}
control.17 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 14'
comment.dbmin 0
comment.dbmax 2100
iface MIXER
name 'Capture Volume'
value.0 8
value.1 8
}
control.18 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
}
control.19 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 14'
comment.dbmin 0
comment.dbmax 2100
iface MIXER
name 'Capture Volume'
index 1
value.0 0
value.1 0
}
control.20 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
index 1
value.0 false
value.1 false
}
control.21 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 14'
comment.dbmin 0
comment.dbmax 2100
iface MIXER
name 'Capture Volume'
index 2
value.0 0
value.1 0
}
control.22 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
index 2
value.0 false
value.1 false
}
control.23 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 4'
comment.dbmin 0
comment.dbmax 4000
iface MIXER
name 'Mux Capture Volume'
value.0 0
value.1 0
}
control.24 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 4'
comment.dbmin 0
comment.dbmax 4000
iface MIXER
name 'Mux Capture Volume'
index 1
value.0 0
value.1 0
}
control.25 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 4'
comment.dbmin 0
comment.dbmax 4000
iface MIXER
name 'Mux Capture Volume'
index 2
value.0 0
value.1 0
}
control.26 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic
comment.item.1 'Front Mic'
comment.item.2 Line
iface MIXER
name 'Input Source'
value Mic
}
control.27 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic
comment.item.1 'Front Mic'
comment.item.2 Line
iface MIXER
name 'Input Source'
index 1
value Mic
}
control.28 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic
comment.item.1 'Front Mic'
comment.item.2 Line
iface MIXER
name 'Input Source'
index 2
value Mic
}
control.29 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 'Digital Playback'
comment.item.1 ADAT
comment.item.2 'Analog Mux 1'
comment.item.3 'Analog Mux 2'
comment.item.4 'Analog Mux 3'
iface MIXER
name 'IEC958 Playback Source'
value 'Digital Playback'
}
control.30 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.31 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.32 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.33 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value false
}
control.34 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
}
control.35 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 64'
comment.dbmin -4800
comment.dbmax 0
iface MIXER
name 'Master Playback Volume'
value 40
}
control.36 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Master Playback Switch'
value true
}
control.37 {
comment.access 'read write user'
comment.type INTEGER
comment.count 2
comment.range '0 - 255'
comment.tlv '0000000100000008ffffec1400000014'
comment.dbmin -5100
comment.dbmax 0
iface MIXER
name 'PCM Playback Volume'
value.0 254
value.1 254
}
}--endcollapse--
!!All Loaded Modules
!!------------------
Module
fuse
ath5k
ath
!!ALSA/HDA dmesg
!!------------------
[ 0.773909] alloc kstat_irqs on node -1 [ 0.773982] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.774129] alloc irq_desc for 29 on node -1 [ 0.774202] alloc kstat_irqs on node -1 [ 0.774281] HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X [ 0.774378] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 0.901950] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) -- [ 0.969812] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.120168] ALSA device list: [ 1.120242] #0: HDA Intel at 0xffa74000 irq 29 [ 1.120423] TCP cubic registered
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Re: ugly sound output (intel-hda) [was: mmotm 2009-11-24-16-47 uploaded]
At Fri, 27 Nov 2009 12:07:14 +0100,
Quoted 5 lines · Jiri Slaby
Quoted 1 line · Takashi Iwai
Could you give rather
alsa-info.shoutput (run with --no-upload option)?Yup, attached.
Thanks.
Just to be sure -- which h/w vendor/machine is it?
Quoted 15 lines
Quoted 10 lines
Quoted 1 line
It's a regression against, I think, 2009-11-13-19-59.
There aren't so many fundamental changes since Nov. 13.
The major ones are for Intel HDMI, but it should be irrelevant in your case.The changes in
patch_sigmatel.csince then are:
d56757abc11a21996d9839c0d4e3b2c3666cd318
ALSA: hda - Replace the rest of jack-detections withsnd_hda_jack_detect()commit
99dee933c33b63da4339bccc092b69b053fe055aAuthor: Jiri Slaby <[email protected]> Date: Fri Nov 27 11:51:13 2009 +0100
Quoted 7 lines
Revert "ALSA: hda - Replace the rest of jack-detections with
snd_hda_jack_detect()"This reverts commit d56757abc11a21996d9839c0d4e3b2c3666cd318.Makes the difference :).
Oh, it's good that you found it quickly.
It means that STAC/IDT codecs give a wrong pin capability.
I'll revert the changes for patch_sigmatel.c now.
thanks,
Takashi
Re: ugly sound output (intel-hda) [was: mmotm 2009-11-24-16-47 uploaded]
Quoted 1 line · Takashi Iwai
Just to be sure -- which h/w vendor/machine is it?
It's an intel development box -- intel motherboard with integrated sound.
Signature · 1 line
js
Re: ugly sound output (intel-hda) [was: mmotm 2009-11-24-16-47 uploaded]
At Fri, 27 Nov 2009 13:22:57 +0100,
Quoted 5 lines · Jiri Slaby
Quoted 1 line · Takashi Iwai
Just to be sure -- which h/w vendor/machine is it?
It's an intel development box -- intel motherboard with integrated sound.
OK, thanks.
I asked it just because I've been gathering the information of HD-audio for various machines.
Takashi
WARNING: kernel/smp.c:292 smp_call_function_single [Was: mmotm 2009-11-24-16-47 uploaded]
In reply to [email protected]Quoted 1 line · On 11/25/2009 01:47 AM, [email protected] wrote:
The mm-of-the-moment snapshot 2009-11-24-16-47 has been uploaded to
Hi, when executing qemu-kvm I often get following warning and a hard lockup.
WARNING: at kernel/smp.c:292 smp_call_function_single+0xbd/0x140() Hardware name: To Be Filled By O.E.M. Modules linked in: kvm_intel kvm fuse ath5k ath Pid: 3265, comm: qemu-kvm Not tainted 2.6.32-rc8-mm1_64 #912 Call Trace: [<ffffffff81039678>] warn_slowpath_common+0x78/0xb0 [<ffffffffa007fd50>] ? __vcpu_clear+0x0/0xd0 [kvm_intel] [<ffffffff810396bf>] warn_slowpath_null+0xf/0x20 [<ffffffff8106410d>] smp_call_function_single+0xbd/0x140 [<ffffffffa0080af6>] vmx_vcpu_load+0x46/0x170 [kvm_intel] [<ffffffffa004dd94>] kvm_arch_vcpu_load+0x24/0x60 [kvm] [<ffffffffa0047a8d>] kvm_sched_in+0xd/0x10 [kvm] [<ffffffff8102de37>] finish_task_switch+0x67/0xc0 [<ffffffff814699f8>] schedule+0x2f8/0x9c0 [<ffffffffa0063538>] ? kvm_apic_has_interrupt+0x48/0x90 [kvm] [<ffffffffa0062a58>] ? kvm_cpu_has_interrupt+0x58/0x70 [kvm] [<ffffffffa0047c9d>] kvm_vcpu_block+0x6d/0xb0 [kvm] [<ffffffff81050f60>] ? autoremove_wake_function+0x0/0x40 [<ffffffffa0055a5a>] kvm_arch_vcpu_ioctl_run+0x3fa/0xb80 [kvm] [<ffffffffa0049955>] kvm_vcpu_ioctl+0x435/0x590 [kvm] [<ffffffff8102f4ce>] ? enqueue_entity+0x6e/0xe0 [<ffffffff8102f5eb>] ? enqueue_task_fair+0x3b/0x80 [<ffffffff8102f6c3>] ? task_new_fair+0x93/0x120 [<ffffffff810cd848>] vfs_ioctl+0x38/0xd0 [<ffffffff810cdd8a>] do_vfs_ioctl+0x8a/0x5a0 [<ffffffff81062926>] ? sys_futex+0xc6/0x170 [<ffffffff810ce2ea>] sys_ioctl+0x4a/0x80 [<ffffffff81002eeb>] system_call_fastpath+0x16/0x1b ---[ end trace ced05997e63d4d13 ]---
It is a regression against 2009-11-13-19-59.
Any ideas?
thanks,
Signature · 1 line
js
Peter Zijlstra
maintainerRe: WARNING: kernel/smp.c:292 smp_call_function_single [Was: mmotm 2009-11-24-16-47 uploaded]
Quoted 21 lines · Jiri Slaby
Quoted 1 line · On 11/25/2009 01:47 AM, [email protected] wrote:
The mm-of-the-moment snapshot 2009-11-24-16-47 has been uploaded to
Hi, when executing qemu-kvm I often get following warning and a hard lockup.
WARNING: at kernel/smp.c:292 smp_call_function_single+0xbd/0x140() Hardware name: To Be Filled By O.E.M. Modules linked in: kvm_intel kvm fuse ath5k ath Pid: 3265, comm: qemu-kvm Not tainted 2.6.32-rc8-mm1_64 #912 Call Trace: [<ffffffff81039678>] warn_slowpath_common+0x78/0xb0 [<ffffffffa007fd50>] ? __vcpu_clear+0x0/0xd0 [kvm_intel] [<ffffffff810396bf>] warn_slowpath_null+0xf/0x20 [<ffffffff8106410d>] smp_call_function_single+0xbd/0x140 [<ffffffffa0080af6>] vmx_vcpu_load+0x46/0x170 [kvm_intel] [<ffffffffa004dd94>] kvm_arch_vcpu_load+0x24/0x60 [kvm] [<ffffffffa0047a8d>] kvm_sched_in+0xd/0x10 [kvm] [<ffffffff8102de37>] finish_task_switch+0x67/0xc0 [<ffffffff814699f8>] schedule+0x2f8/0x9c0
Quoted 3 lines
It is a regression against 2009-11-13-19-59.
Any ideas?
Looks like kvm is trying to send an IPI from the preempt notifiers, which are called with IRQs disabled, not a sane thing to do.
If they really want that, they'll have to use a pre-allocated struct call_single_data and use __smp_call_function_single.
Re: WARNING: kernel/smp.c:292 smp_call_function_single [Was: mmotm 2009-11-24-16-47 uploaded]
Quoted 24 lines · Peter Zijlstra
Quoted 23 lines · Jiri Slaby
Quoted 1 line · On 11/25/2009 01:47 AM, [email protected] wrote:
The mm-of-the-moment snapshot 2009-11-24-16-47 has been uploaded to
Hi, when executing qemu-kvm I often get following warning and a hard lockup.
WARNING: at kernel/smp.c:292 smp_call_function_single+0xbd/0x140() Hardware name: To Be Filled By O.E.M. Modules linked in: kvm_intel kvm fuse ath5k ath Pid: 3265, comm: qemu-kvm Not tainted 2.6.32-rc8-mm1_64 #912 Call Trace: [<ffffffff81039678>] warn_slowpath_common+0x78/0xb0 [<ffffffffa007fd50>] ? __vcpu_clear+0x0/0xd0 [kvm_intel] [<ffffffff810396bf>] warn_slowpath_null+0xf/0x20 [<ffffffff8106410d>] smp_call_function_single+0xbd/0x140 [<ffffffffa0080af6>] vmx_vcpu_load+0x46/0x170 [kvm_intel] [<ffffffffa004dd94>] kvm_arch_vcpu_load+0x24/0x60 [kvm] [<ffffffffa0047a8d>] kvm_sched_in+0xd/0x10 [kvm] [<ffffffff8102de37>] finish_task_switch+0x67/0xc0 [<ffffffff814699f8>] schedule+0x2f8/0x9c0It is a regression against 2009-11-13-19-59.
Quoted 7 lines
Quoted 1 line
Any ideas?
Looks like kvm is trying to send an IPI from the preempt notifiers, which are called with IRQs disabled, not a sane thing to do.
If they really want that, they'll have to use a pre-allocated struct
call_single_dataand use__smp_call_function_single.
Hmm, commit 498657a moved the fire_sched_in_preempt_notifiers() call into the irqs disabled section recently.
sched, kvm: Fix race condition involving sched_in_preempt_notifers
In finish_task_switch(), fire_sched_in_preempt_notifiers() is called after finish_lock_switch().
However, depending on architecture, preemption can be enabled after finish_lock_switch() which breaks the semantics of preempt notifiers.
So move it before finish_arch_switch(). This also makes the in- notifiers symmetric to out- notifiers in terms of locking - now both are called under rq lock.
It's not a surprise that this breaks the existing code which does the smp function call.
Thanks,
tglx
Re: WARNING: kernel/smp.c:292 smp_call_function_single [Was: mmotm 2009-11-24-16-47 uploaded]
Quoted 37 lines · Thomas Gleixner
Quoted 24 lines · Peter Zijlstra
Quoted 23 lines · Jiri Slaby
Quoted 1 line · On 11/25/2009 01:47 AM, [email protected] wrote:
The mm-of-the-moment snapshot 2009-11-24-16-47 has been uploaded to
Hi, when executing qemu-kvm I often get following warning and a hard lockup.
WARNING: at kernel/smp.c:292 smp_call_function_single+0xbd/0x140() Hardware name: To Be Filled By O.E.M. Modules linked in: kvm_intel kvm fuse ath5k ath Pid: 3265, comm: qemu-kvm Not tainted 2.6.32-rc8-mm1_64 #912 Call Trace: [<ffffffff81039678>] warn_slowpath_common+0x78/0xb0 [<ffffffffa007fd50>] ? __vcpu_clear+0x0/0xd0 [kvm_intel] [<ffffffff810396bf>] warn_slowpath_null+0xf/0x20 [<ffffffff8106410d>] smp_call_function_single+0xbd/0x140 [<ffffffffa0080af6>] vmx_vcpu_load+0x46/0x170 [kvm_intel] [<ffffffffa004dd94>] kvm_arch_vcpu_load+0x24/0x60 [kvm] [<ffffffffa0047a8d>] kvm_sched_in+0xd/0x10 [kvm] [<ffffffff8102de37>] finish_task_switch+0x67/0xc0 [<ffffffff814699f8>] schedule+0x2f8/0x9c0It is a regression against 2009-11-13-19-59.
Quoted 7 lines
Quoted 1 line
Any ideas?
Looks like kvm is trying to send an IPI from the preempt notifiers, which are called with IRQs disabled, not a sane thing to do.
If they really want that, they'll have to use a pre-allocated struct
call_single_dataand use__smp_call_function_single.Hmm, commit 498657a moved the
fire_sched_in_preempt_notifiers()call into the irqs disabled section recently.
Quoted 8 lines
sched, kvm: Fix race condition involving
sched_in_preempt_notifersIn
finish_task_switch(),fire_sched_in_preempt_notifiers()is called afterfinish_lock_switch().However, depending on architecture, preemption can be enabled after
finish_lock_switch()which breaks the semantics of preempt notifiers.
This is patently wrong btw.
schedule()
{
need_resched:
preempt_disable(); .... task_switch();
....
preempt_enable_no_resched();
if (need_resched())
goto need_resched;
}Quoted 7 lines
So move it before
finish_arch_switch(). This also makes the in- notifiers symmetric to out- notifiers in terms of locking - now both are called under rq lock.It's not a surprise that this breaks the existing code which does the smp function call.
Thanks,
tglx
Re: WARNING: kernel/smp.c:292 smp_call_function_single [Was: mmotm 2009-11-24-16-47 uploaded]
In reply to Thomas GleixnerQuoted 49 lines · Thomas Gleixner
Quoted 26 lines · Peter Zijlstra
Quoted 24 lines · Jiri Slaby
Quoted 2 lines · On 11/25/2009 01:47 AM, [email protected] wrote:
The mm-of-the-moment snapshot 2009-11-24-16-47 has been uploaded to
Hi, when executing qemu-kvm I often get following warning and a hard lockup.
WARNING: at kernel/smp.c:292 smp_call_function_single+0xbd/0x140() Hardware name: To Be Filled By O.E.M. Modules linked in: kvm_intel kvm fuse ath5k ath Pid: 3265, comm: qemu-kvm Not tainted 2.6.32-rc8-mm1_64 #912 Call Trace: [<ffffffff81039678>] warn_slowpath_common+0x78/0xb0 [<ffffffffa007fd50>] ? __vcpu_clear+0x0/0xd0 [kvm_intel] [<ffffffff810396bf>] warn_slowpath_null+0xf/0x20 [<ffffffff8106410d>] smp_call_function_single+0xbd/0x140 [<ffffffffa0080af6>] vmx_vcpu_load+0x46/0x170 [kvm_intel] [<ffffffffa004dd94>] kvm_arch_vcpu_load+0x24/0x60 [kvm] [<ffffffffa0047a8d>] kvm_sched_in+0xd/0x10 [kvm] [<ffffffff8102de37>] finish_task_switch+0x67/0xc0 [<ffffffff814699f8>] schedule+0x2f8/0x9c0It is a regression against 2009-11-13-19-59.
Quoted 8 lines
Quoted 2 lines
Any ideas?
Looks like kvm is trying to send an IPI from the preempt notifiers, which are called with IRQs disabled, not a sane thing to do.
If they really want that, they'll have to use a pre-allocated struct
call_single_dataand use__smp_call_function_single.Hmm, commit 498657a moved the
fire_sched_in_preempt_notifiers()call into the irqs disabled section recently.sched, kvm: Fix race condition involving
sched_in_preempt_notifersIn
finish_task_switch(),fire_sched_in_preempt_notifiers()is called afterfinish_lock_switch().However, depending on architecture, preemption can be enabled after
finish_lock_switch()which breaks the semantics of preempt notifiers.
Quoted 7 lines
So move it before
finish_arch_switch(). This also makes the in- notifiers symmetric to out- notifiers in terms of locking - now both are called under rq lock.It's not a surprise that this breaks the existing code which does the smp function call.
Yes, kvm expects preempt notifiers to be run with irqs enabled. Copying patch author.
Signature · 1 line
Do not meddle in the internals of kernels, for they are subtle and quick to panic.
Re: WARNING: kernel/smp.c:292 smp_call_function_single [Was: mmotm 2009-11-24-16-47 uploaded]
Hello,
Quoted 16 lines · Avi Kivity
Quoted 16 lines
Hmm, commit 498657a moved the
fire_sched_in_preempt_notifiers()call into the irqs disabled section recently.sched, kvm: Fix race condition involving
sched_in_preempt_notifersIn
finish_task_switch(),fire_sched_in_preempt_notifiers()is called afterfinish_lock_switch().However, depending on architecture, preemption can be enabled after
finish_lock_switch()which breaks the semantics of preempt notifiers.So move it before
finish_arch_switch(). This also makes the in- notifiers symmetric to out- notifiers in terms of locking - now both are called under rq lock.
Quoted 5 lines
Quoted 2 lines
It's not a surprise that this breaks the existing code which does the smp function call.
Yes, kvm expects preempt notifiers to be run with irqs enabled. Copying patch author.
Hmmm... then, it's broken both ways. The previous code may get preempted after scheduling but before the notifier is run (which breaks the semantics of the callback horribly), the current code doesn't satisfy kvm's requirement. Another thing is that in the previous implementation the context is different between the 'in' and 'out' callbacks, which is subtle and nasty. Can kvm be converted to not do smp calls directly?
For the time being, maybe it's best to back out the fix given that the only architecture which may be affected by the original bug is ia64 which is the only one with both kvm and the unlocked context switch.
Thanks.
Signature · 1 line
tejun
Re: WARNING: kernel/smp.c:292 smp_call_function_single [Was: mmotm 2009-11-24-16-47 uploaded]
Quoted 26 lines · Tejun Heo
Hello,
Quoted 16 lines · Avi Kivity
Quoted 16 lines
Hmm, commit 498657a moved the
fire_sched_in_preempt_notifiers()call into the irqs disabled section recently.sched, kvm: Fix race condition involving
sched_in_preempt_notifersIn
finish_task_switch(),fire_sched_in_preempt_notifiers()is called afterfinish_lock_switch().However, depending on architecture, preemption can be enabled after
finish_lock_switch()which breaks the semantics of preempt notifiers.So move it before
finish_arch_switch(). This also makes the in- notifiers symmetric to out- notifiers in terms of locking - now both are called under rq lock.Quoted 6 lines
Quoted 3 lines
It's not a surprise that this breaks the existing code which does the smp function call.
Yes, kvm expects preempt notifiers to be run with irqs enabled. Copying patch author.
Quoted 8 lines
Hmmm... then, it's broken both ways. The previous code may get preempted after scheduling but before the notifier is run (which breaks the semantics of the callback horribly), the current code doesn't satisfy kvm's requirement. Another thing is that in the previous implementation the context is different between the 'in' and 'out' callbacks, which is subtle and nasty. Can kvm be converted to not do smp calls directly?
No. kvm uses preempt notifiers to manage extended processor registers (much like the fpu). If we're scheduled into cpu A but state is currently live on cpu B, we need to go ahead and pull it in.
Technically, we can delay the IPI to happen after the sched in notifier; we can set some illegal state in cpu A and handle the exception by sending the IPI and fixing up the state. But that would be slower, and not help the problem at all since some accesses happen with interrupts disabled.
Since this is essentially the same problem as the fpu, maybe we can solve it the same way. How does the fpu migrate its state across processors? One way would be to save the state when the task is selected for migration.
Quoted 4 lines
For the time being, maybe it's best to back out the fix given that the only architecture which may be affected by the original bug is ia64 which is the only one with both kvm and the unlocked context switch.
Agreed.
Signature · 1 line
error compiling committee.c: too many arguments to function
Re: WARNING: kernel/smp.c:292 smp_call_function_single [Was: mmotm 2009-11-24-16-47 uploaded]
In reply to Tejun HeoQuoted 22 lines · Tejun Heo
Hello,
Quoted 19 lines · Avi Kivity
Quoted 18 lines
Hmm, commit 498657a moved the
fire_sched_in_preempt_notifiers()call into the irqs disabled section recently.sched, kvm: Fix race condition involving
sched_in_preempt_notifersIn
finish_task_switch(),fire_sched_in_preempt_notifiers()is called afterfinish_lock_switch().However, depending on architecture, preemption can be enabled after
finish_lock_switch()which breaks the semantics of preempt notifiers.So move it before
finish_arch_switch(). This also makes the in- notifiers symmetric to out- notifiers in terms of locking - now both are called under rq lock.It's not a surprise that this breaks the existing code which does the smp function call.
Quoted 6 lines
Quoted 2 lines
Yes, kvm expects preempt notifiers to be run with irqs enabled. Copying patch author.
Hmmm... then, it's broken both ways. The previous code may get preempted after scheduling but before the notifier is run (which breaks the semantics of the callback horribly), the current code
No, it _CANNOT_ be preempted at that point:
schedule()
{
preempt_disable();
switch_to();
preempt_enable();
}Quoted 8 lines
doesn't satisfy kvm's requirement. Another thing is that in the previous implementation the context is different between the 'in' and 'out' callbacks, which is subtle and nasty. Can kvm be converted to not do smp calls directly?
For the time being, maybe it's best to back out the fix given that the only architecture which may be affected by the original bug is ia64 which is the only one with both kvm and the unlocked context switch.
Do you have a pointer to the original bug report ?
Thanks,
tglx
Re: WARNING: kernel/smp.c:292 smp_call_function_single [Was: mmotm 2009-11-24-16-47 uploaded]
Hello,
Quoted 10 lines · Thomas Gleixner
No, it _CANNOT_ be preempted at that point:
schedule(){ preempt_disable(); switch_to(); preempt_enable(); }
Yes, you're right.
Quoted 5 lines
Quoted 3 lines
For the time being, maybe it's best to back out the fix given that the only architecture which may be affected by the original bug is ia64 which is the only one with both kvm and the unlocked context switch.
Do you have a pointer to the original bug report ?
Nope, I was referring to the imaginary race condition, so there's no bug to worry about. The only problem is the asymmetry between in and out callbacks. Then again, it's not really possible to match them on unlocked ctxsw archs anyway, so I guess the only thing to do is to document the context difference between in and out.
Sorry about the fuss. I'll send out patch to revert it and document the difference.
Thanks.
Signature · 1 line
tejun
PATCH 1/1 sched: revert 498657a478c60be092208422fefa9c7b248729c2
498657a478c60be092208422fefa9c7b248729c2 incorrectly assumed that preempt wasn't disabled around context_switch() and thus was fixing imaginary problem. It also broke kvm because it depended on ->sched_in() to be called with irq enabled so that it can do smp calls from there.
Revert the incorrect commit and add comment describing different contexts under with the two callbacks are invoked.
---
Again, my apologies for the unnecessary fuss. I for some reason was thinking schedule_tail() is always called after context_switch() and the ifdefed preemption enable there led me to think that at that point preemption was enabled once lock switch is over.
Thank you.
include/linux/preempt.h | 4 ++++ kernel/sched.c | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-)
include/linux/preempt.h +4 -0
@@ -105,6 +105,10 @@ struct preempt_notifier;* @sched_out: we've just been preempted * notifier: struct preempt_notifier for the task being preempted * next: the task that's kicking us out +* +* Please note that sched_in and out are called under different +* contexts. sched_in is called with rq lock held and irq disabled +* while sched_out is called without rq lock and irq enabled. */ struct preempt_ops {void (*sched_in)(struct preempt_notifier *notifier,int cpu);
kernel/sched.c +1 -1
@@ -2758,9 +2758,9 @@ static void finish_task_switch(struct rq *rq, struct task_struct *prev) prev_state = prev->state;finish_arch_switch (prev);perf_event_task_sched_in (current,cpu_of (rq)); -fire_sched_in_preempt_notifiers (current);finish_lock_switch (rq, prev); +fire_sched_in_preempt_notifiers (current);if (mm)mmdrop (mm);if (unlikely (prev_state ==TASK_DEAD )) {
Re: [PATCH tip/sched/urgent] sched: revert 498657a478c60be092208422fefa9c7b248729c2
Quoted 9 lines · Tejun Heo
498657a478c60be092208422fefa9c7b248729c2incorrectly assumed that preempt wasn't disabled aroundcontext_switch()and thus was fixing imaginary problem. It also broke kvm because it depended on ->sched_in() to be called with irq enabled so that it can do smp calls from there.Revert the incorrect commit and add comment describing different contexts under with the two callbacks are invoked.
Quoted 8 lines
* notifier: struct
preempt_notifierfor the task being preempted
* next: the task that's kicking us out
+ *
+ * Please note thatsched_inand out are called under different
+ * contexts.sched_inis called with rq lock held and irq disabled
+ * whilesched_outis called without rq lock and irq enabled. */
Is this transposed? sched_in must be called with interrupts enabled for the kvm IPI to work.
Signature · 1 line
error compiling committee.c: too many arguments to function