atbm8830: use AGC setting from config
PATCH 1/1 atbm8830: use AGC setting from config
Hi,
This patch improves ATBM8830 reception by using per card AGC
configuration rather than register default.
Regards,
David
Signed-off-by David T. L. Wong <[email protected]>
linux/drivers/media/dvb/dvb-usb/cxusb.c +3 -0
@@ -1187,6 +1187,9 @@ .osc_clk_freq = 30400, /* in kHz */ .if_freq = 0, /* zero IF */ .zif_swap_iq = 1, + .agc_min = 0x2E, + .agc_max = 0x90, + .agc_hold_loop = 0, };static int cxusb_mygica_d689_frontend_attach (struct dvb_usb_adapter *adap)
linux/drivers/media/dvb/frontends/atbm8830.c +4 -2
@@ -164,6 +164,10 @@static int set_agc_config (struct atbm_state *priv,u8 min,u8 max,u8 hold_loop) { +/* no effect if both min and max are zero */ +if (!min && !max) +return 0 ; +atbm8830_write_reg (priv,REG_AGC_MIN , min);atbm8830_write_reg (priv,REG_AGC_MAX , max);atbm8830_write_reg (priv,REG_AGC_HOLD_LOOP , hold_loop);
@@ -227,11 +231,9 @@/*Set IF frequency*/ set_if_freq (priv, cfg->if_freq); -#if 0 /*Set AGC Config*/ set_agc_config (priv, cfg->agc_min, cfg->agc_max, cfg->agc_hold_loop); -#endif /*Set static channel mode*/ set_static_channel_mode (priv);
linux/drivers/media/video/cx23885/cx23885-dvb.c +6 -0
@@ -555,6 +555,9 @@ .osc_clk_freq = 30400, /* in kHz */ .if_freq = 0, /* zero IF */ .zif_swap_iq = 1, + .agc_min = 0x2E, + .agc_max = 0xFF, + .agc_hold_loop = 0, };static struct max2165_config mygic_x8558pro_max2165_cfg1 = {
@@ -571,6 +574,9 @@ .osc_clk_freq = 30400, /* in kHz */ .if_freq = 0, /* zero IF */ .zif_swap_iq = 1, + .agc_min = 0x2E, + .agc_max = 0xFF, + .agc_hold_loop = 0, };static struct max2165_config mygic_x8558pro_max2165_cfg2 = {