dvb_usb_dib0700 ( T14BR) not initializing on reboot
I have a DVB-T USB device ( T14BR),
which seems to work fine when I plug in my Fedora 10 box but I if I reboot with device connected it regularity fails to initialise correctly and to correct I have to remove unplug-device remove the module and reload module to fix up and only after system has been fully booted
eg
modprobe -r dvb-usb-dib0700
then
modprobe dvb-usb-dib0700 adapter_nr=2
and then plug device in.
I get the following msgs when it seems to fail and the second set when it works
kernel log (failed)
Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 2 Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 3 Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 4 Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 5 Nov 22 13:51:50 mythbox kernel: usb 2-8: new low speed USB device using ohci_hcd and address 6 Nov 22 13:51:50 mythbox kernel: usb 2-8: configuration #1 chosen from 1 choice Nov 22 13:51:50 mythbox kernel: usb 2-8: New USB device found, idVendor=413c, idProduct=3010 Nov 22 13:51:50 mythbox kernel: usb 2-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Nov 22 13:51:50 mythbox kernel: usbcore: registered new interface driver hiddev Nov 22 13:51:50 mythbox kernel: input: HID 413c:3010 as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.0/input/input4 Nov 22 13:51:50 mythbox kernel: input,hidraw0: USB HID v1.00 Mouse [HID 413c:3010] on usb-0000:00:02.0-8 Nov 22 13:51:50 mythbox kernel: usbcore: registered new interface driver usbhid Nov 22 13:51:50 mythbox kernel: usbhid: v2.6:USB HID core driver
http://www.artectv.com/ehtm/products/t14.htm
kernel log (working)
Nov 29 09:58:20 mythbox kernel: usb 1-8: new high speed USB device using ehci_hcd and address 3 Nov 29 09:58:20 mythbox kernel: usb 1-8: configuration #1 chosen from 1 choice Nov 29 09:58:20 mythbox kernel: usb 1-8: New USB device found, idVendor=05d8, idProduct=810f Nov 29 09:58:20 mythbox kernel: usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Nov 29 09:58:20 mythbox kernel: usb 1-8: Product: ART7070 Nov 29 09:58:20 mythbox kernel: usb 1-8: Manufacturer: Ultima Nov 29 09:58:20 mythbox kernel: usb 1-8: SerialNumber: 001 Nov 29 09:58:20 mythbox kernel: dib0700: loaded with support for 7 different device-types Nov 29 09:58:20 mythbox kernel: dvb-usb: found a 'Artec T14BR DVB-T' in cold state, will try to load a firmware Nov 29 09:58:20 mythbox kernel: firmware: requesting dvb-usb-dib0700-1.10.fw Nov 29 09:58:20 mythbox kernel: dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw' Nov 29 09:58:22 mythbox kernel: dib0700: firmware started successfully. Nov 29 09:58:23 mythbox kernel: dvb-usb: found a 'Artec T14BR DVB-T' in warm state. Nov 29 09:58:23 mythbox kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Nov 29 09:58:23 mythbox kernel: DVB: registering new adapter (Artec T14BR DVB-T) Nov 29 09:58:23 mythbox kernel: DiB0070: successfully identified Nov 29 09:58:23 mythbox kernel: input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1 -8/input/input7 Nov 29 09:58:23 mythbox kernel: dvb-usb: schedule remote query interval to 150 msecs. Nov 29 09:58:23 mythbox kernel: dvb-usb: Artec T14BR DVB-T successfully
initialized and connected.
Quoted 79 lines · Paul
I have a DVB-T USB device ( T14BR),
which seems to work fine when I plug in my Fedora 10 box but I if I reboot with device connected it regularity fails to initialise correctly and to correct I have to remove unplug-device remove the module and reload module to fix up and only after system has been fully bootedeg
modprobe -r dvb-usb-dib0700
then
modprobe dvb-usb-dib0700 adapter_nr=2
and then plug device in.
I get the following msgs when it seems to fail and the second set when it workskernel log (failed)
Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 2 Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 3 Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 4 Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 5 Nov 22 13:51:50 mythbox kernel: usb 2-8: new low speed USB device using ohci_hcd and address 6 Nov 22 13:51:50 mythbox kernel: usb 2-8: configuration #1 chosen from 1 choice Nov 22 13:51:50 mythbox kernel: usb 2-8: New USB device found, idVendor=413c, idProduct=3010 Nov 22 13:51:50 mythbox kernel: usb 2-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Nov 22 13:51:50 mythbox kernel: usbcore: registered new interface driver hiddev Nov 22 13:51:50 mythbox kernel: input: HID 413c:3010 as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.0/input/input4 Nov 22 13:51:50 mythbox kernel: input,hidraw0: USB HID v1.00 Mouse [HID 413c:3010] on usb-0000:00:02.0-8 Nov 22 13:51:50 mythbox kernel: usbcore: registered new interface driver usbhid Nov 22 13:51:50 mythbox kernel: usbhid: v2.6:USB HID core driverhttp://www.artectv.com/ehtm/products/t14.htm
kernel log (working)
Nov 29 09:58:20 mythbox kernel: usb 1-8: new high speed USB device using ehci_hcd and address 3 Nov 29 09:58:20 mythbox kernel: usb 1-8: configuration #1 chosen from 1 choice Nov 29 09:58:20 mythbox kernel: usb 1-8: New USB device found, idVendor=05d8, idProduct=810f Nov 29 09:58:20 mythbox kernel: usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Nov 29 09:58:20 mythbox kernel: usb 1-8: Product: ART7070 Nov 29 09:58:20 mythbox kernel: usb 1-8: Manufacturer: Ultima Nov 29 09:58:20 mythbox kernel: usb 1-8: SerialNumber: 001 Nov 29 09:58:20 mythbox kernel: dib0700: loaded with support for 7 different device-types Nov 29 09:58:20 mythbox kernel: dvb-usb: found a 'Artec T14BR DVB-T' in cold state, will try to load a firmware Nov 29 09:58:20 mythbox kernel: firmware: requesting dvb-usb-dib0700-1.10.fw Nov 29 09:58:20 mythbox kernel: dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw' Nov 29 09:58:22 mythbox kernel: dib0700: firmware started successfully. Nov 29 09:58:23 mythbox kernel: dvb-usb: found a 'Artec T14BR DVB-T' in warm state. Nov 29 09:58:23 mythbox kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Nov 29 09:58:23 mythbox kernel: DVB: registering new adapter (Artec T14BR DVB-T) Nov 29 09:58:23 mythbox kernel: DiB0070: successfully identified Nov 29 09:58:23 mythbox kernel: input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1 -8/input/input7 Nov 29 09:58:23 mythbox kernel: dvb-usb: schedule remote query interval to 150 msecs. Nov 29 09:58:23 mythbox kernel: dvb-usb: Artec T14BR DVB-T successfully
Quoted 3 lines
initialized and connected.
Note I googled a few other people with the same issue:
http://www.linuxtv.org/pipermail/linux-dvb/2007-November/022145.html
http://ubuntuforums.org/archive/index.php/t-1233131.html
so I'm assuming its a known issue, right?
Paul
Are you sure that your usb is dib0700?
if you look on the sources .... you wont see idVendor=413c, idProduct=3010 however there is
oscar@X-Evian:/usr/src/linux-source-2.6.30/drivers/media/dvb/dvb-usb$ grep 05d8 * -iR
Coincidencia en el fichero binario dvb-usb-dib0700.ko dvb-usb-dib0700.mod.c:MODULE_ALIAS("usb:v05D8p810Fd*dc*dsc*dp*ic*isc*ip*");
in the file .... so .... try to recompile it with your device id, and pray for it :)
Quoted 100 lines · Paul
Quoted 81 lines · Paul
I have a DVB-T USB device ( T14BR),
which seems to work fine when I plug in my Fedora 10 box but I if I reboot with device connected it regularity fails to initialise correctly and to correct I have to remove unplug-device remove the module and reload module to fix up and only after system has been fully bootedeg
modprobe -r dvb-usb-dib0700
then
modprobe dvb-usb-dib0700 adapter_nr=2
and then plug device in.
I get the following msgs when it seems to fail and the second set when it workskernel log (failed)
Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 2 Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 3 Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 4 Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 5 Nov 22 13:51:50 mythbox kernel: usb 2-8: new low speed USB device using ohci_hcd and address 6 Nov 22 13:51:50 mythbox kernel: usb 2-8: configuration #1 chosen from 1 choice Nov 22 13:51:50 mythbox kernel: usb 2-8: New USB device found, idVendor=413c, idProduct=3010 Nov 22 13:51:50 mythbox kernel: usb 2-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Nov 22 13:51:50 mythbox kernel: usbcore: registered new interface driver hiddev Nov 22 13:51:50 mythbox kernel: input: HID 413c:3010 as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.0/input/input4 Nov 22 13:51:50 mythbox kernel: input,hidraw0: USB HID v1.00 Mouse [HID 413c:3010] on usb-0000:00:02.0-8 Nov 22 13:51:50 mythbox kernel: usbcore: registered new interface driver usbhid Nov 22 13:51:50 mythbox kernel: usbhid: v2.6:USB HID core driverhttp://www.artectv.com/ehtm/products/t14.htm
kernel log (working)
Nov 29 09:58:20 mythbox kernel: usb 1-8: new high speed USB device using ehci_hcd and address 3 Nov 29 09:58:20 mythbox kernel: usb 1-8: configuration #1 chosen from 1 choice Nov 29 09:58:20 mythbox kernel: usb 1-8: New USB device found, idVendor=05d8, idProduct=810f Nov 29 09:58:20 mythbox kernel: usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Nov 29 09:58:20 mythbox kernel: usb 1-8: Product: ART7070 Nov 29 09:58:20 mythbox kernel: usb 1-8: Manufacturer: Ultima Nov 29 09:58:20 mythbox kernel: usb 1-8: SerialNumber: 001 Nov 29 09:58:20 mythbox kernel: dib0700: loaded with support for 7 different device-types Nov 29 09:58:20 mythbox kernel: dvb-usb: found a 'Artec T14BR DVB-T' in cold state, will try to load a firmware Nov 29 09:58:20 mythbox kernel: firmware: requesting dvb-usb-dib0700-1.10.fw Nov 29 09:58:20 mythbox kernel: dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw' Nov 29 09:58:22 mythbox kernel: dib0700: firmware started successfully. Nov 29 09:58:23 mythbox kernel: dvb-usb: found a 'Artec T14BR DVB-T' in warm state. Nov 29 09:58:23 mythbox kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Nov 29 09:58:23 mythbox kernel: DVB: registering new adapter (Artec T14BR DVB-T) Nov 29 09:58:23 mythbox kernel: DiB0070: successfully identified Nov 29 09:58:23 mythbox kernel: input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1 -8/input/input7 Nov 29 09:58:23 mythbox kernel: dvb-usb: schedule remote query interval to 150 msecs. Nov 29 09:58:23 mythbox kernel: dvb-usb: Artec T14BR DVB-T successfullyQuoted 3 lines
initialized and connected.
Note I googled a few other people with the same issue:
http://www.linuxtv.org/pipermail/linux-dvb/2007-November/022145.html
http://ubuntuforums.org/archive/index.php/t-1233131.htmlso I'm assuming its a known issue, right?
Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Vendor is below:
usb 1-8: New USB device found, idVendor=05d8, idProduct=810f usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Note it does work as I said AFTER boot is complete but not if its plugged in during the boot phase..
so i must be something to do with how USB is initialised perhaps?
Note it does work sometimes during reboot so perhaps some timing issue during init?
thanks
Paul
Quoted 113 lines · ALi
Are you sure that your usb is dib0700?
if you look on the sources .... you wont see idVendor=413c, idProduct=3010 however there isoscar@X-Evian:/usr/src/linux-source-2.6.30/drivers/media/dvb/dvb-usb$ grep 05d8 * -iR
Coincidencia en el fichero binario dvb-usb-dib0700.ko dvb-usb-dib0700.mod.c:MODULE_ALIAS("usb:v05D8p810Fd*dc*dsc*dp*ic*isc*ip*");in the file .... so .... try to recompile it with your device id, and pray for it :)
Quoted 98 lines · Paul
Quoted 80 lines · Paul
I have a DVB-T USB device ( T14BR),
which seems to work fine when I plug in my Fedora 10 box but I if I reboot with device connected it regularity fails to initialise correctly and to correct I have to remove unplug-device remove the module and reload module to fix up and only after system has been fully bootedeg
modprobe -r dvb-usb-dib0700
then
modprobe dvb-usb-dib0700 adapter_nr=2
and then plug device in.
I get the following msgs when it seems to fail and the second set when it workskernel log (failed)
Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 2 Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 3 Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 4 Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using ohci_hcd and address 5 Nov 22 13:51:50 mythbox kernel: usb 2-8: new low speed USB device using ohci_hcd and address 6 Nov 22 13:51:50 mythbox kernel: usb 2-8: configuration #1 chosen from 1 choice Nov 22 13:51:50 mythbox kernel: usb 2-8: New USB device found, idVendor=413c, idProduct=3010 Nov 22 13:51:50 mythbox kernel: usb 2-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Nov 22 13:51:50 mythbox kernel: usbcore: registered new interface driver hiddev Nov 22 13:51:50 mythbox kernel: input: HID 413c:3010 as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.0/input/input4 Nov 22 13:51:50 mythbox kernel: input,hidraw0: USB HID v1.00 Mouse [HID 413c:3010] on usb-0000:00:02.0-8 Nov 22 13:51:50 mythbox kernel: usbcore: registered new interface driver usbhid Nov 22 13:51:50 mythbox kernel: usbhid: v2.6:USB HID core driverhttp://www.artectv.com/ehtm/products/t14.htm
kernel log (working)
Nov 29 09:58:20 mythbox kernel: usb 1-8: new high speed USB device using ehci_hcd and address 3 Nov 29 09:58:20 mythbox kernel: usb 1-8: configuration #1 chosen from 1 choice Nov 29 09:58:20 mythbox kernel: usb 1-8: New USB device found, idVendor=05d8, idProduct=810f Nov 29 09:58:20 mythbox kernel: usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Nov 29 09:58:20 mythbox kernel: usb 1-8: Product: ART7070 Nov 29 09:58:20 mythbox kernel: usb 1-8: Manufacturer: Ultima Nov 29 09:58:20 mythbox kernel: usb 1-8: SerialNumber: 001 Nov 29 09:58:20 mythbox kernel: dib0700: loaded with support for 7 different device-types Nov 29 09:58:20 mythbox kernel: dvb-usb: found a 'Artec T14BR DVB-T' in cold state, will try to load a firmware Nov 29 09:58:20 mythbox kernel: firmware: requesting dvb-usb-dib0700-1.10.fw Nov 29 09:58:20 mythbox kernel: dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw' Nov 29 09:58:22 mythbox kernel: dib0700: firmware started successfully. Nov 29 09:58:23 mythbox kernel: dvb-usb: found a 'Artec T14BR DVB-T' in warm state. Nov 29 09:58:23 mythbox kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Nov 29 09:58:23 mythbox kernel: DVB: registering new adapter (Artec T14BR DVB-T) Nov 29 09:58:23 mythbox kernel: DiB0070: successfully identified Nov 29 09:58:23 mythbox kernel: input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1 -8/input/input7 Nov 29 09:58:23 mythbox kernel: dvb-usb: schedule remote query interval to 150 msecs. Nov 29 09:58:23 mythbox kernel: dvb-usb: Artec T14BR DVB-T successfullyQuoted 3 lines
initialized and connected.
Note I googled a few other people with the same issue:
http://www.linuxtv.org/pipermail/linux-dvb/2007-November/022145.html
http://ubuntuforums.org/archive/index.php/t-1233131.htmlso I'm assuming its a known issue, right?
Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html