Skip to contentSkip to conversation

Support for Intel 82598EB 10-Gigabit AT2 Server Adapter

DISCUSSION Jesper Krogh 2 participants 2 messages Dec 4, 2009 – Dec 5, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hi.

I just got two Intel 82598EB 10-Gigabit AT2 Server Adapter i sort of assumed that they "just worked" since I have a AF-adapter (SR-fiber), that works flawlessly and it it "just another media" in the other end.

But as of 2.6.31.6 the pci-ids is not registered in modules.pcimap

82:00.0 0200: 8086:150b (rev 01)
84:00.0 Ethernet controller: Intel Corporation 82598EB 10-Gigabit AT2 Server Adapter (rev 01)

And the adapter does not produce any ethX interfaces for usage when the ixgbe drivers is loaded.

Is it as simple as just adding the identifiers to the module-map or is there a patch flying around somewhere?

Thanks.

Jesper

#1 lore raw
Quoted 15 lines · Jesper Krogh

Hi.

I just got two Intel 82598EB 10-Gigabit AT2 Server Adapter i sort of assumed that they "just worked" since I have a AF-adapter (SR-fiber), that works flawlessly and it it "just another media" in the other end.

But as of 2.6.31.6 the pci-ids is not registered in modules.pcimap

82:00.0 0200: 8086:150b (rev 01)
84:00.0 Ethernet controller: Intel Corporation 82598EB 10-Gigabit AT2 Server Adapter (rev 01)

And the adapter does not produce any ethX interfaces for usage when the ixgbe drivers is loaded.

Quoted 8 lines

Is it as simple as just adding the identifiers to the module-map or is there a patch flying around somewhere?

Thanks.

Jesper

--

Support for your NIC was first introduced in 2.6.32 kernel, so your kernel does not have native support for the NIC. You can move to 2.6.32 or newer kernel OR simply download the ixgbe driver from
http://e1000.sf.net. I would suggest downloading the latest version which is 2.0.44.14 which has support for you NIC.

Support was first introduced in version 2.0.38.2 (which is also on the sourceforge site), but I would suggest using the latest version.

Signature · 2 lines
Cheers,
Jeff