BNX2I - update CQ arming algorith for 5771x chipsets
Subsystems (2)
PATCH 3/5 BNX2I - update CQ arming algorith for 5771x chipsets
* Only affects 5771x (10G chipsets) devices
* This is an optimized CQ arming algoritm which takes into account the number of outstanding tasks
--- drivers/scsi/bnx2i/bnx2i.h | 1 + drivers/scsi/bnx2i/bnx2i_hwi.c | 36 +++++++++++++++++++++++++++--------- drivers/scsi/bnx2i/bnx2i_init.c | 4 ++++ 3 files changed, 32 insertions(+), 9 deletions(-)
drivers/scsi/bnx2i/bnx2i.h +1 -0
@@ -684,6 +684,7 @@ extern unsigned int error_mask1, error_mask2;extern u64 iscsi_error_mask;extern unsigned int en_tcp_dack;extern unsigned int event_coal_div; +extern unsigned int event_coal_min;extern struct scsi_transport_template *bnx2i_scsi_xport_template;extern struct iscsi_transport bnx2i_iscsi_transport;
drivers/scsi/bnx2i/bnx2i_hwi.c +27 -9
@@ -133,21 +133,39 @@ void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action) {struct bnx2i_5771x_cq_db *cq_db;u16 cq_index; +u16 next_index; +u32 num_active_cmds; + +/* Coalesce CQ entries only on 10G devices */ if (!test_bit (BNX2I_NX2_DEV_57710 , &ep->hba->cnic_dev_type))return ; +/* Do not update CQ DB multiple times before firmware writes +* '0xFFFF' to CQDB->SQN field. Deviation may cause spurious +* interrupts and other unwanted results +*/ + cq_db = (struct bnx2i_5771x_cq_db *) ep->qp.cq_pgtbl_virt; +if (cq_db->sqn[0 ] && cq_db->sqn[0 ] !=0xFFFF ) +return ; +if (action ==CNIC_ARM_CQE ) { - cq_index = ep->qp.cqe_exp_seq_sn + - ep->num_active_cmds / event_coal_div; - cq_index %= (ep->qp.cqe_size *2 +1 ); -if (!cq_index) { + num_active_cmds = ep->num_active_cmds; +if (num_active_cmds <= event_coal_min) + next_index =1 ; +else + next_index = event_coal_min + + (num_active_cmds - event_coal_min) / event_coal_div; +if (!next_index) + next_index =1 ; + cq_index = ep->qp.cqe_exp_seq_sn + next_index -1 ; +if (cq_index > ep->qp.cqe_size *2 ) + cq_index -= ep->qp.cqe_size *2 ; +if (!cq_index) cq_index =1 ; - cq_db = (struct bnx2i_5771x_cq_db *) - ep->qp.cq_pgtbl_virt; - cq_db->sqn[0 ] = cq_index; - } - } + + cq_db->sqn[0 ] = cq_index; + } }
drivers/scsi/bnx2i/bnx2i_init.c +4 -0
@@ -32,6 +32,10 @@ MODULE_VERSION(DRV_MODULE_VERSION);static DEFINE_MUTEX (bnx2i_dev_lock); +unsigned int event_coal_min =24 ; +module_param (event_coal_min, int,0664 ); +MODULE_PARM_DESC (event_coal_min,"Event Coalescing Minimum Commands" ); +unsigned int event_coal_div =1 ;module_param (event_coal_div, int,0664 );MODULE_PARM_DESC (event_coal_div,"Event Coalescing Divide Factor" );
Signature · 1 line
1.6.5.1
Quoted 1 line · Anil Veerabhadrappa
* Only affects 5771x (10G chipsets) devices
Why don't you do it on 1 gig? Is it just not worth it or is it no possible due to some limitation?
Quoted 6 lines · Mike Christie
Quoted 1 line · Anil Veerabhadrappa
* Only affects 5771x (10G chipsets) devices
Why don't you do it on 1 gig? Is it just not worth it or is it no possible due to some limitation?
All NetXtreme2 devices support event coalescing, however the performance advantage was marginal in 570x (1G) iSCSI offload.
Quoted 5 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html