Skip to contentSkip to conversation

MPC8567 - TEXT_BASE boot rom question.

U-Boot Bob Winslow 1 participant 1 message Dec 11, 2009

lore
Share & tools
lore
#0 lore raw

Hi all,

MPC8567 u-boot question for the experts out there...

I must be doing something stupid, or I just don't understand how the 8567 boots from rom..., law entries, tables, etc...

Our board is using a MPC8567 with a 4 MEGByte boot rom flash (16 bit).... It has just 512MB of DDR2 memory(no ram on
the local bus). I can get u-boot to come up to the prompt ok but only
with a rom image(u-boot.bin) of 4MEG BYTE size and
the settings in the files, see below. I am using the BDI to write the 4meg image to the rom.

I guess I don't understand TEXT_BASE very well.. and how it relates to the boot location: