x86-64: modify memcpy()/memset() alternatives mechanism
PATCH 1/1 x86-64: modify memcpy()/memset() alternatives mechanism
In order to avoid unnecessary chains of branches, rather than implementing memcpy()/memset()'s access to their alternative implementations via a jump, patch the (larger) original function directly.
The memcpy() part of this is slightly subtle: While alternative instruction patching does itself use memcpy(), with the replacement block being less than 64-bytes in size the main loop of the original function doesn't get used for copying memcpy_c() over memcpy(), and hence we can safely write over its beginning.
Also note that the CFI annotations are fine for both variants of each of the functions.
--- arch/x86/lib/memcpy_64.S | 23 ++++++++--------------- arch/x86/lib/memset_64.S | 18 ++++++------------ 2 files changed, 14 insertions(+), 27 deletions(-)
arch/x86/lib/memcpy_64.S +8 -15
@@ -20,12 +20,11 @@ /* * memcpy_c() - fast string ops (REP MOVSQ) based variant. * - * Calls to this get patched into the kernel image via the + * This gets patched over the unrolled variant (below) via the * alternative instructions framework: */ - ALIGN -memcpy_c: - CFI_STARTPROC + .section .altinstr_replacement, "ax", @progbits +.Lmemcpy_c: movq %rdi, %rax movl %edx, %ecx
@@ -35,8 +34,8 @@ memcpy_c: movl %edx, %ecx rep movsb ret - CFI_ENDPROC -ENDPROC(memcpy_c) +.Lmemcpy_e: + .previous ENTRY(__memcpy) ENTRY(memcpy)
@@ -128,16 +127,10 @@ ENDPROC(__memcpy) * It is also a lot simpler. Use this when possible: */ - .section .altinstr_replacement, "ax" -1: .byte 0xeb /* jmp <disp8> */ - .byte (memcpy_c - memcpy) - (2f - 1b) /* offset */ -2: - .previous - .section .altinstructions, "a" .align 8 .quad memcpy - .quad 1b + .quad .Lmemcpy_c .byte X86_FEATURE_REP_GOOD /*
@@ -145,6 +138,6 @@ ENDPROC(__memcpy) * so it is silly to overwrite itself with nops - reboot is the * only outcome... */ - .byte 2b - 1b - .byte 2b - 1b + .byte .Lmemcpy_e - .Lmemcpy_c + .byte .Lmemcpy_e - .Lmemcpy_c .previous
arch/x86/lib/memset_64.S +6 -12
@@ -12,9 +12,8 @@ * * rax original destination */ - ALIGN -memset_c: - CFI_STARTPROC + .section .altinstr_replacement, "ax", @progbits +.Lmemset_c: movq %rdi,%r9 movl %edx,%r8d andl $7,%r8d
@@ -29,8 +28,8 @@ memset_c: rep stosb movq %r9,%rax ret - CFI_ENDPROC -ENDPROC(memset_c) +.Lmemset_e: + .previous ENTRY(memset) ENTRY(__memset)
@@ -118,16 +117,11 @@ ENDPROC(__memset) #include <asm/cpufeature.h> - .section .altinstr_replacement,"ax" -1: .byte 0xeb /* jmp <disp8> */ - .byte (memset_c - memset) - (2f - 1b) /* offset */ -2: - .previous .section .altinstructions,"a" .align 8 .quad memset - .quad 1b + .quad .Lmemset_c .byte X86_FEATURE_REP_GOOD .byte .Lfinal - memset - .byte 2b - 1b + .byte .Lmemset_e - .Lmemset_c .previous
[tip:x86/asm] x86-64: Modify memcpy()/memset() alternatives mechanism
Commit-ID: 7269e8812a59f74fb1ce134465d0bcf5683b93a1 Gitweb: http://git.kernel.org/tip/7269e8812a59f74fb1ce134465d0bcf5683b93a1 Author: Jan Beulich <[email protected]> AuthorDate: Fri, 18 Dec 2009 16:16:03 +0000 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 30 Dec 2009 11:57:32 +0100
x86-64: Modify memcpy()/memset() alternatives mechanism
In order to avoid unnecessary chains of branches, rather than implementing memcpy()/memset()'s access to their alternative implementations via a jump, patch the (larger) original function directly.
The memcpy() part of this is slightly subtle: while alternative instruction patching does itself use memcpy(), with the replacement block being less than 64-bytes in size the main loop of the original function doesn't get used for copying memcpy_c() over memcpy(), and hence we can safely write over its beginning.
Also note that the CFI annotations are fine for both variants of each of the functions.
LKML-Reference: <[email protected]>
--- arch/x86/lib/memcpy_64.S | 23 ++++++++--------------- arch/x86/lib/memset_64.S | 18 ++++++------------ 2 files changed, 14 insertions(+), 27 deletions(-)
arch/x86/lib/memcpy_64.S +8 -15
@@ -20,12 +20,11 @@ /* * memcpy_c() - fast string ops (REP MOVSQ) based variant. * - * Calls to this get patched into the kernel image via the + * This gets patched over the unrolled variant (below) via the * alternative instructions framework: */ - ALIGN -memcpy_c: - CFI_STARTPROC + .section .altinstr_replacement, "ax", @progbits +.Lmemcpy_c: movq %rdi, %rax movl %edx, %ecx
@@ -35,8 +34,8 @@ memcpy_c: movl %edx, %ecx rep movsb ret - CFI_ENDPROC -ENDPROC(memcpy_c) +.Lmemcpy_e: + .previous ENTRY(__memcpy) ENTRY(memcpy)
@@ -128,16 +127,10 @@ ENDPROC(__memcpy) * It is also a lot simpler. Use this when possible: */ - .section .altinstr_replacement, "ax" -1: .byte 0xeb /* jmp <disp8> */ - .byte (memcpy_c - memcpy) - (2f - 1b) /* offset */ -2: - .previous - .section .altinstructions, "a" .align 8 .quad memcpy - .quad 1b + .quad .Lmemcpy_c .byte X86_FEATURE_REP_GOOD /*
@@ -145,6 +138,6 @@ ENDPROC(__memcpy) * so it is silly to overwrite itself with nops - reboot is the * only outcome... */ - .byte 2b - 1b - .byte 2b - 1b + .byte .Lmemcpy_e - .Lmemcpy_c + .byte .Lmemcpy_e - .Lmemcpy_c .previous
arch/x86/lib/memset_64.S +6 -12
@@ -12,9 +12,8 @@ * * rax original destination */ - ALIGN -memset_c: - CFI_STARTPROC + .section .altinstr_replacement, "ax", @progbits +.Lmemset_c: movq %rdi,%r9 movl %edx,%r8d andl $7,%r8d
@@ -29,8 +28,8 @@ memset_c: rep stosb movq %r9,%rax ret - CFI_ENDPROC -ENDPROC(memset_c) +.Lmemset_e: + .previous ENTRY(memset) ENTRY(__memset)
@@ -118,16 +117,11 @@ ENDPROC(__memset) #include <asm/cpufeature.h> - .section .altinstr_replacement,"ax" -1: .byte 0xeb /* jmp <disp8> */ - .byte (memset_c - memset) - (2f - 1b) /* offset */ -2: - .previous .section .altinstructions,"a" .align 8 .quad memset - .quad 1b + .quad .Lmemset_c .byte X86_FEATURE_REP_GOOD .byte .Lfinal - memset - .byte 2b - 1b + .byte .Lmemset_e - .Lmemset_c .previous