Skip to contentSkip to conversation

Broken OMAP3 EVM and SMDKC100

U-Boot Dirk Behme 2 participants 2 messages Dec 24, 2009

lore
Share & tools
lore

Dirk Behme

author
#0 lore raw

Doing ./MAKEALL ARM_CORTEX_A8 with recent mainline head, omap3_evm and smdkc100 fail with

env_onenand.c: In function 'env_relocate_spec':
env_onenand.c:70: error: 'CONFIG_ENV_ADDR_FLEX' undeclared (first use in this function)
env_onenand.c:70: error: (Each undeclared identifier is reported only once env_onenand.c:70: error: for each function it appears in.) env_onenand.c: In function 'saveenv':
env_onenand.c:106: error: 'CONFIG_ENV_ADDR_FLEX' undeclared (first use in this function)
env_onenand.c:107: error: 'CONFIG_ENV_SIZE_FLEX' undeclared (first use in this function)

Just fyi, in case somebody has time to look into this.

Ah, and omap3_evm additionally has

omap3.c: In function 'musb_platform_init':

omap3.c:126: warning: label 'end' defined but not used

Best regards

Dirk

#1 lore raw
Quoted 12 lines

-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Dirk Behme
Sent: Thursday, December 24, 2009 11:48 AM
To: u-boot at lists.denx.de
Subject: [U-Boot] Broken OMAP3 EVM and SMDKC100

Doing ./MAKEALL ARM_CORTEX_A8 with recent mainline head, omap3_evm and
smdkc100 fail with

Quoted 13 lines

env_onenand.c: In function 'env_relocate_spec':
env_onenand.c:70: error: 'CONFIG_ENV_ADDR_FLEX' undeclared (first use in this function)
env_onenand.c:70: error: (Each undeclared identifier is reported only once
env_onenand.c:70: error: for each function it appears in.) env_onenand.c: In function 'saveenv':
env_onenand.c:106: error: 'CONFIG_ENV_ADDR_FLEX' undeclared (first use
in this function)
env_onenand.c:107: error: 'CONFIG_ENV_SIZE_FLEX' undeclared (first use
in this function)

This should already have been fixed by my patch.
See: http://www.mail-archive.com/u-boot at lists.denx.de/msg26698.html

Quoted 8 lines

Just fyi, in case somebody has time to look into this.

Ah, and omap3_evm additionally has

omap3.c: In function 'musb_platform_init':

omap3.c:126: warning: label 'end' defined but not used

Didn't notice it yesterday. Will look into it now.

Best regards,
Sanjeev

Quoted 9 lines

Best regards

Dirk
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot