Nova-T 500 Dual DVB-T
Hi,
I have a Nova-T 500 Dual DVB-T card that used to work very well under Mandriva 2008.1 (kernel 2.6.24.7).
I moved to Mandriva 2009.1, then 2010.0 (kernel 2.6.31.6) and it doesn't work well any more. Scan can't find channels. I tried hading "options dvb-usb-dib0700 force_lna_activation=1" in /etc/modprobe.conf. It improve just a bit. Scan find only a few channels. If I revert to Mandriva 2008.1 (in another partition), all things are good (without adding anything in modprobe.conf).
Is there a new version of the driver (dvb_usb_dib0700) that correct this behavior. If not, how to install the driver from kernel 2.6.24.7 in kernel 2.6.31.6 ?
regards
Yves
Hello Yves,
Quoted 9 lines · Yves
Hi,
I have a Nova-T 500 Dual DVB-T card that used to work very well under Mandriva 2008.1 (kernel 2.6.24.7).
I moved to Mandriva 2009.1, then 2010.0 (kernel 2.6.31.6) and it doesn't work well any more. Scan can't find channels. I tried hading "options dvb-usb-dib0700 force_lna_activation=1" in
/etc/modprobe.conf. It improve just a bit. Scan find only a few channels. If I revert to Mandriva 2008.1 (in another partition), all things are good (without adding anything in modprobe.conf).Is there a new version of the driver (
dvb_usb_dib0700) that correct this behavior. If not, how to install the driver from kernel 2.6.24.7 in kernel 2.6.31.6 ?
Please try the current driver available at v4l/dvb develpment tree and share your results here.
hg clone http://linuxtv.org/hg/v4l-dvb
make
make rmmod
make install
Finally, just restart your machine and test your favourite application.
For additional info:
http://www.linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers
Cheers,
Douglas
Hi,
FYI, I had some trouble with this card along the lines of these posts you might find interesting
http://www.mail-archive.com/[email protected]/msg08331.html
http://osdir.com/ml/linux-media/2009-02/msg00948.html
I have the card now working using Ubuntu 9.10 (2.6.31 kernel), with the manual addition of V4L from a version prior to the patch to use the new 1.20 firmware..
Carey
2009/12/21 Douglas Schilling Landgraf <[email protected]>:
Quoted 43 lines
Hello Yves,
Quoted 13 lines · Yves
Hi,
I have a Nova-T 500 Dual DVB-T card that used to work very well under Mandriva 2008.1 (kernel 2.6.24.7).
I moved to Mandriva 2009.1, then 2010.0 (kernel 2.6.31.6) and it doesn't work well any more. Scan can't find channels. I tried hading "options dvb-usb-dib0700 force_lna_activation=1" in
/etc/modprobe.conf. It improve just a bit. Scan find only a few channels. If I revert to Mandriva 2008.1 (in another partition), all things are good (without adding anything in modprobe.conf).Quoted 5 lines
Is there a new version of the driver (
dvb_usb_dib0700) that correct this behavior.
If not, how to install the driver from kernel 2.6.24.7 in kernel 2.6.31.6 ?Please try the current driver available at v4l/dvb develpment tree and share your results here.
hg clone http://linuxtv.org/hg/v4l-dvb
make
make rmmod
make installFinally, just restart your machine and test your favourite application.
For additional info:
http://www.linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers
Cheers,
Douglas
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 22 lines · Douglas Schilling Landgraf
Hello Yves,
Quoted 9 lines · Yves
Hi,
I have a Nova-T 500 Dual DVB-T card that used to work very well under Mandriva 2008.1 (kernel 2.6.24.7).
I moved to Mandriva 2009.1, then 2010.0 (kernel 2.6.31.6) and it doesn't work well any more. Scan can't find channels. I tried hading "options dvb-usb-dib0700 force_lna_activation=1" in
/etc/modprobe.conf. It improve just a bit. Scan find only a few channels. If I revert to Mandriva 2008.1 (in another partition), all things are good (without adding anything in modprobe.conf).Is there a new version of the driver (
dvb_usb_dib0700) that correct this behavior. If not, how to install the driver from kernel 2.6.24.7 in kernel 2.6.31.6 ?Please try the current driver available at v4l/dvb develpment tree and share your results here.
hg clone http://linuxtv.org/hg/v4l-dvb
make
make rmmod
make installFinally, just restart your machine and test your favourite application.
Quoted 13 lines
For additional info:
http://www.linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers
Cheers,
DouglasSignature · 3 lines
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Douglas,
Unfortunately, the compilation did not succeed:
$ make
make -C /home/mythtv/v4l-dvb/v4l
make[1]: entrant dans le répertoire « /home/mythtv/v4l-dvb/v4l » perl scripts/make_config_compat.pl /lib/modules/2.6.31.6-desktop-1mnb/source ./.myconfig ./config-compat.h creating symbolic links...
make -C firmware prep
make[2]: Entering directory `/home/mythtv/v4l-dvb/v4l/firmware'
make[2]: Leaving directory `/home/mythtv/v4l-dvb/v4l/firmware'
make -C firmware
make[2]: Entering directory `/home/mythtv/v4l-dvb/v4l/firmware'
CC
ihex2fw
Generating vicam/firmware.fw
Generating dabusb/firmware.fw
Generating dabusb/bitstream.bin
Generating ttusb-budget/dspbootcode.bin
Generating cpia2/stv0672_vp4.bin
Generating av7110/bootcode.bin
make[2]: Leaving directory `/home/mythtv/v4l-dvb/v4l/firmware'
Kernel build directory is /lib/modules/2.6.31.6-desktop-1mnb/build
make -C /lib/modules/2.6.31.6-desktop-1mnb/build SUBDIRS=/home/mythtv/v4l-dvb/v4l modules make[2]: Entering directory `/usr/src/linux-2.6.31.6-desktop-1mnb'
CC [M]/home/mythtv/v4l-dvb/v4l/tuner-xc2028.o
CC [M]/home/mythtv/v4l-dvb/v4l/tuner-simple.o
CC [M]/home/mythtv/v4l-dvb/v4l/tuner-types.o
CC [M]/home/mythtv/v4l-dvb/v4l/mt20xx.o
....
CC [M] /home/mythtv/v4l-dvb/v4l/cx88-cards.o CC [M] /home/mythtv/v4l-dvb/v4l/cx88-core.o CC [M] /home/mythtv/v4l-dvb/v4l/cx88-i2c.o CC [M] /home/mythtv/v4l-dvb/v4l/cx88-tvaudio.o CC [M] /home/mythtv/v4l-dvb/v4l/cx88-dsp.o CC [M] /home/mythtv/v4l-dvb/v4l/cx88-input.o CC [M] /home/mythtv/v4l-dvb/v4l/dvbdev.o
/home/mythtv/v4l-dvb/v4l/dvbdev.c: In function 'init_dvbdev':/home/mythtv/v4l-dvb/v4l/dvbdev.c:520: error: 'struct class' has no member named 'nodename' make[3]: *** [/home/mythtv/v4l-dvb/v4l/dvbdev.o] Error 1
make[2]: *** [_module_/home/mythtv/v4l-dvb/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-2.6.31.6-desktop-1mnb'
make[1]: *** [default] Erreur 2
make[1]: quittant le répertoire « /home/mythtv/v4l-dvb/v4l »
make: *** [all] Erreur 2
I don't know that is wrong.
Yves
Quoted 108 lines · Yves
Quoted 22 lines · Douglas Schilling Landgraf
Hello Yves,
Quoted 9 lines · Yves
Hi,
I have a Nova-T 500 Dual DVB-T card that used to work very well under Mandriva 2008.1 (kernel 2.6.24.7).
I moved to Mandriva 2009.1, then 2010.0 (kernel 2.6.31.6) and it doesn't work well any more. Scan can't find channels. I tried hading "options dvb-usb-dib0700 force_lna_activation=1" in
/etc/modprobe.conf. It improve just a bit. Scan find only a few channels. If I revert to Mandriva 2008.1 (in another partition), all things are good (without adding anything in modprobe.conf).Is there a new version of the driver (
dvb_usb_dib0700) that correct this behavior. If not, how to install the driver from kernel 2.6.24.7 in kernel 2.6.31.6 ?Please try the current driver available at v4l/dvb develpment tree and share your results here.
hg clone http://linuxtv.org/hg/v4l-dvb
make
make rmmod
make installFinally, just restart your machine and test your favourite application.
Quoted 13 lines
For additional info:
http://www.linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers
Cheers,
DouglasSignature · 3 lines
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.htmlHello Douglas,
Unfortunately, the compilation did not succeed:
$ makemake -C
/home/mythtv/v4l-dvb/v4lmake[1]: entrant dans le répertoire «
/home/mythtv/v4l-dvb/v4l» perlscripts/make_config_compat.pl/lib/modules/2.6.31.6-desktop-1mnb/source./.myconfig ./config-compat.h creating symbolic links...make -C firmware prep
make[2]: Entering directory `/home/mythtv/v4l-dvb/v4l/firmware'
make[2]: Leaving directory `/home/mythtv/v4l-dvb/v4l/firmware'
make -C firmware
make[2]: Entering directory `/home/mythtv/v4l-dvb/v4l/firmware'
CC
ihex2fwGenerating vicam/firmware.fw
Generating dabusb/firmware.fw
Generating dabusb/bitstream.bin
Generating ttusb-budget/dspbootcode.bin
Generating cpia2/stv0672_vp4.bin
Generating av7110/bootcode.bin
make[2]: Leaving directory `/home/mythtv/v4l-dvb/v4l/firmware'
Kernel build directory is
/lib/modules/2.6.31.6-desktop-1mnb/buildmake -C
/lib/modules/2.6.31.6-desktop-1mnb/buildSUBDIRS=/home/mythtv/v4l-dvb/v4l modules make[2]: Entering directory `/usr/src/linux-2.6.31.6-desktop-1mnb'CC [M]
/home/mythtv/v4l-dvb/v4l/tuner-xc2028.oCC [M]
/home/mythtv/v4l-dvb/v4l/tuner-simple.oCC [M]
/home/mythtv/v4l-dvb/v4l/tuner-types.oCC [M]
/home/mythtv/v4l-dvb/v4l/mt20xx.o....
CC [M] /home/mythtv/v4l-dvb/v4l/cx88-cards.o CC [M] /home/mythtv/v4l-dvb/v4l/cx88-core.o CC [M] /home/mythtv/v4l-dvb/v4l/cx88-i2c.o CC [M] /home/mythtv/v4l-dvb/v4l/cx88-tvaudio.o CC [M] /home/mythtv/v4l-dvb/v4l/cx88-dsp.o CC [M] /home/mythtv/v4l-dvb/v4l/cx88-input.o CC [M] /home/mythtv/v4l-dvb/v4l/dvbdev.o
/home/mythtv/v4l-dvb/v4l/dvbdev.c: In function 'init_dvbdev':/home/mythtv/v4l-dvb/v4l/dvbdev.c:520: error: 'struct class' has no member named 'nodename' make[3]: *** [/home/mythtv/v4l-dvb/v4l/dvbdev.o] Error 1
make[2]: *** [_module_/home/mythtv/v4l-dvb/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-2.6.31.6-desktop-1mnb'
make[1]: *** [default] Erreur 2
make[1]: quittant le répertoire «/home/mythtv/v4l-dvb/v4l»
make: *** [all] Erreur 2
Quoted 7 lines
I don't know that is wrong.
Yves
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
I am still blocked at this stage. I do not know what to do.
Thank you for your help!
Yves
So, I tried using kernel 2.6.32.2 from http://www.kernel.org. I compiled it OK. I still get an error with v4l-dvb :
[mythtv@localhost v4l-dvb]$ make -j 5
make -C /home/mythtv/v4l-dvb/v4l
make[1]: entrant dans le répertoire « /home/mythtv/v4l-dvb/v4l » No version yet, using 2.6.32.2
make[1]: quittant le répertoire « /home/mythtv/v4l-dvb/v4l »
make[1]: entrant dans le répertoire « /home/mythtv/v4l-dvb/v4l » scripts/make_makefile.pl
./scripts/make_kconfig.pl /lib/modules/2.6.32.2/build /lib/modules/2.6.32.2/source
Updating/Creating .config
Preparing to compile for kernel version 2.6.32
Preparing to compile for kernel version 2.6.32
Created default (all yes) .config file
./scripts/make_myconfig.pl
make[1]: quittant le répertoire « /home/mythtv/v4l-dvb/v4l »
make[1]: entrant dans le répertoire « /home/mythtv/v4l-dvb/v4l » perl scripts/make_config_compat.pl /lib/modules/2.6.32.2/source ./.myconfig ./config-compat.h ln -sf . oss
creating symbolic links...
make -C firmware prep
make[2]: Entering directory `/home/mythtv/v4l-dvb/v4l/firmware'
make[2]: Leaving directory `/home/mythtv/v4l-dvb/v4l/firmware'
make -C firmware
make[2]: Entering directory `/home/mythtv/v4l-dvb/v4l/firmware'
CC
ihex2fw
Generating vicam/firmware.fw
Generating dabusb/firmware.fw
Generating ttusb-budget/dspbootcode.bin
Generating dabusb/bitstream.bin
Generating cpia2/stv0672_vp4.bin
Generating av7110/bootcode.bin
make[2]: Leaving directory `/home/mythtv/v4l-dvb/v4l/firmware'
Kernel build directory is /lib/modules/2.6.32.2/build
make -C /lib/modules/2.6.32.2/build SUBDIRS=/home/mythtv/v4l-dvb/v4l modules make[2]: Entering directory `/home/mythtv/Téléchargements/linux-2.6.32.2'
CC [M]/home/mythtv/v4l-dvb/v4l/tuner-xc2028.o
CC [M]/home/mythtv/v4l-dvb/v4l/tuner-simple.o
CC [M]/home/mythtv/v4l-dvb/v4l/tuner-types.o
...
CC [M] /home/mythtv/v4l-dvb/v4l/radio-si4713.o CC [M] /home/mythtv/v4l-dvb/v4l/radio-maestro.o CC [M] /home/mythtv/v4l-dvb/v4l/radio-miropcm20.o
/home/mythtv/v4l-dvb/v4l/radio-miropcm20.c:20:23: error: sound/aci.h: No such file or directory /home/mythtv/v4l-dvb/v4l/radio-miropcm20.c: In function 'pcm20_mute':/home/mythtv/v4l-dvb/v4l/radio-miropcm20.c:46: error: implicit declaration of function 'snd_aci_cmd' /home/mythtv/v4l-dvb/v4l/radio-miropcm20.c:46: error: 'ACI_SET_TUNERMUTE' undeclared (first use in this function) /home/mythtv/v4l-dvb/v4l/radio-miropcm20.c:46: error: (Each undeclared identifier is reported only once /home/mythtv/v4l-dvb/v4l/radio-miropcm20.c:46: error: for each function it appears in.) /home/mythtv/v4l-dvb/v4l/radio-miropcm20.c: In function 'pcm20_stereo':/home/mythtv/v4l-dvb/v4l/radio-miropcm20.c:51: error: 'ACI_SET_TUNERMONO' undeclared (first use in this function) /home/mythtv/v4l-dvb/v4l/radio-miropcm20.c: In function 'pcm20_setfreq':/home/mythtv/v4l-dvb/v4l/radio-miropcm20.c:63: error: dereferencing pointer to incomplete type /home/mythtv/v4l-dvb/v4l/radio-miropcm20.c:63: error: dereferencing pointer to incomplete type /home/mythtv/v4l-dvb/v4l/radio-miropcm20.c:70: error: 'ACI_WRITE_TUNE' undeclared (first use in this function) /home/mythtv/v4l-dvb/v4l/radio-miropcm20.c: In function 'pcm20_init':/home/mythtv/v4l-dvb/v4l/radio-miropcm20.c:225: error: implicit declaration of function 'snd_aci_get_aci' /home/mythtv/v4l-dvb/v4l/radio-miropcm20.c:225: warning: assignment makes pointer from integer without a cast make[3]: *** [/home/mythtv/v4l-dvb/v4l/radio-miropcm20.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [_module_/home/mythtv/v4l-dvb/v4l] Error 2
make[2]: Leaving directory `/home/mythtv/Téléchargements/linux-2.6.32.2'
make[1]: *** [default] Erreur 2
make[1]: quittant le répertoire « /home/mythtv/v4l-dvb/v4l »
make: *** [all] Erreur 2
????
Yves