sequence numbers in conntrack
Hello,
Could someone help me to explain what does the conntack module do in TCP connection negotiation in the following three cases: (host N is behind the NAT and host P is on the other side of the NAT)
A:
P sends a SYN to H and H replies with an SYN-ACK with an invalid sequence number (If this passes normally through is it possible to filter it out?)
B:
P sends a SYN to H and H replies with non SYN-ACK (3-way-handshake) or SYN (TCP simultaneous open) package
C: If the "--random" option is given to the postrouting chain, what happens if the clients use up all the ports?
Many thanks,
Denes Nemeth
Quoted 18 lines · Nemeth Denes
Hello,
Could someone help me to explain what does the conntack module do in TCP connection negotiation in the following three cases: (host N is behind the NAT and host P is on the other side of the NAT)
A:
P sends a SYN to H and H replies with an SYN-ACK with an invalid sequence number (If this passes normally through is it possible to filter it out?)B:
P sends a SYN to H and H replies with non SYN-ACK (3-way-handshake) or SYN (TCP simultaneous open) packageC: If the "--random" option is given to the postrouting chain, what happens if the clients use up all the ports?
Quoted 8 lines
Many thanks,
Denes Nemeth--
To unsubscribe from this list: send the line "unsubscribe netfilter" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Dear denes
Do you mean N host where host H is mentioned ?
thnks
Hi
Sorry it was a typo it should be the following:
(host H is behind the NAT ....)
Thanks
Quoted 38 lines · vishesh
Quoted 18 lines · Nemeth Denes
Hello,
Could someone help me to explain what does the conntack module do in TCP connection negotiation in the following three cases: (host N is behind the NAT and host P is on the other side of the NAT)
A:
P sends a SYN to H and H replies with an SYN-ACK with an invalid sequence number (If this passes normally through is it possible to filter it out?)B:
P sends a SYN to H and H replies with non SYN-ACK (3-way-handshake) or SYN (TCP simultaneous open) packageC: If the "--random" option is given to the postrouting chain, what happens if the clients use up all the ports?
Quoted 9 lines
Many thanks,
Denes Nemeth--
To unsubscribe from this list: send the line "unsubscribe netfilter" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.htmlDear denes
Do you mean N host where host H is mentioned ?
thnks--
To unsubscribe from this list: send the line "unsubscribe netfilter" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi
It seems that I still had some typos is the text, sorry. I hope here is the clear explanation of the situation:
The infrastructure:
Host PRI (private IP) ----- <NAT> ------ Host PUB (public IP) NAT(PRI) means the external mapping allocated for PRI by the NAT
A:
(1) PRI -> PUB: SYN
(2) PUB -> NAT(PRI): SYN-ACK (with invalid sequence number)
Question: What happens to packet (2)? If it is not filtered is is possible to filter it?
B:
(1) PRI -> PUB: SYN
(2) PUB -> NAT(PRI): anything other than (SYN-ACK or SYN)
Question: What happens to packet (2)? If it is not filtered is is possible to filter it?
C:
Assuming that --random option is given to the POSTROUTING chain of the NAT box, and hosts like PRI open so many connections to the other side of the NAT (to hosts like PUB) that the high port space is used up (every port is allocated to a host behind the NAT).
Question: What will happen to a new connection?
Many thanks for the help
Quoted 51 lines · Nemeth Denes
Hi
Sorry it was a typo it should be the following:
(host H is behind the NAT ....)Thanks
Quoted 38 lines · vishesh
Quoted 15 lines · Nemeth Denes
Hello,
Could someone help me to explain what does the conntack module do in TCP connection negotiation in the following three cases: (host N is behind the NAT and host P is on the other side of the NAT)
A:
P sends a SYN to H and H replies with an SYN-ACK with an invalid sequence number (If this passes normally through is it possible to filter it out?)B:
P sends a SYN to H and H replies with non SYN-ACK (3-way-handshake) or SYN (TCP simultaneous open) packageQuoted 12 lines
C: If the "--random" option is given to the postrouting chain, what happens if the clients use up all the ports?
Many thanks,
Denes NemethSignature · 3 lines
To unsubscribe from this list: send the line "unsubscribe netfilter" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.htmlDear denes
Do you mean N host where host H is mentioned ?
thnksSignature · 3 lines
To unsubscribe from this list: send the line "unsubscribe netfilter" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.htmlSignature · 3 lines
To unsubscribe from this list: send the line "unsubscribe netfilter" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html