Skip to contentSkip to conversation

ep93xx: use pr_fmt in clock.c

PATCH New H Hartley Sweeten 2 participants 2 messages Dec 30, 2009 – Jan 11, 2010

Subsystems (3)
Arm (32-bit) Arm sub-architectures Arm/Cirrus logic EP93XX Arm architecture
lore
Share & tools
lore

H Hartley Sweeten

author
#0 lore raw

PATCH 1/1 ep93xx: use pr_fmt in clock.c

Use pr_fmt to prefix kernel output with the module name and change all printk messages to pr_<level> format.

Signed-off-by H Hartley Sweeten <[email protected]>
Cc Ryan Mallon <[email protected]>

---

arch/arm/mach-ep93xx/clock.c +4 -2
index 1d0f9d8..07a58d0 100644
@@ -10,6 +10,8 @@
  * your option) any later version.
  */
 
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/err.h>

@@ -468,9 +470,9 @@ static int __init ep93xx_clock_init(void)
 	}
 	clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1);
 
-	printk(KERN_INFO "ep93xx: PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
+	pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
 		clk_pll1.rate / 1000000, clk_pll2.rate / 1000000);
-	printk(KERN_INFO "ep93xx: FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
+	pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
 		clk_f.rate / 1000000, clk_h.rate / 1000000,
 		clk_p.rate / 1000000);
#1 lore raw

PATCH 1/1 ep93xx: use pr_fmt in clock.c

Quoted 23 lines · H Hartley Sweeten

Use pr_fmt to prefix kernel output with the module name and change all printk messages to pr_<level> format.

Signed-off-by H Hartley Sweeten <[email protected]>
Cc Ryan Mallon <[email protected]>

---

arch/arm/mach-ep93xx/clock.c +2 -0
index 1d0f9d8..07a58d0 100644
@@ -10,6 +10,8 @@
  * your option) any later version.
  */
 
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/err.h>

@@ -468,9 +470,9 @@ static int __init ep93xx_clock_init(void)
 	}

arch/arm/mach-ep93xx/clock.c static int __init ep93xx_clock_init(void) · line 478

Quoted 10 lines
arch/arm/mach-ep93xx/clock.c +2 -2
 	clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1);
 
-	printk(KERN_INFO "ep93xx: PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
+	pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
 		clk_pll1.rate / 1000000, clk_pll2.rate / 1000000);
-	printk(KERN_INFO "ep93xx: FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
+	pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
 		clk_f.rate / 1000000, clk_h.rate / 1000000,
 		clk_p.rate / 1000000);
Acked-by Ryan Mallon <[email protected]>
Signature · 7 lines
Bluewater Systems Ltd - ARM Technology Solution Centre

Ryan Mallon         		5 Amuri Park, 404 Barbadoes St
ryan at bluewatersys.com         	PO Box 13 889, Christchurch 8013
http://www.bluewatersys.com	New Zealand
Phone: +64 3 3779127		Freecall: Australia 1800 148 751
Fax:   +64 3 3779135			  USA 1800 261 2934