Skip to contentSkip to conversation

openpic specification

DISCUSSION gshan 3 participants 3 messages Jan 15, 2010 – Jan 17, 2010

lore
Share & tools
lore

gshan

author
#0 lore raw

I ever searched openpic specification on google for several times, but unfortunately nothing found. Could anybody point me where I can get the openpic specification?

The source code seems being from IBM: arch/powerpc/sysdev/mpic.c

Thanks in advance,
Gavin

#1 lore raw
Quoted 1 line · gshan

I ever searched openpic specification on google for several times, but =

unfortunately nothing found.

Quoted 3 lines

Could anybody point me where I can get the openpic specification? =20
The source code seems being from IBM: arch/powerpc/sysdev/mpic.c

While not the openpic spec if you grab any of the Freescale RM for = MPC85xx chips there will be a chapter on the PIC that is an "openPIC" = based interrupt controller.

- k=

#2 lore raw
Quoted 6 lines

I ever searched openpic specification on google for several times, but unfortunately nothing found. Could anybody point me where I can get the openpic specification?

The source code seems being from IBM: arch/powerpc/sysdev/mpic.c

While not the openpic spec if you grab any of the Freescale RM for MPC85xx chips there will be a chapter on the PIC that is an "openPIC" based interrupt controller.

Thanks, Kumar. Actually, I'm facing a wired issue on my system: some times, the interrupt from external devices can't be seen from CPU. That means the CPU was never disturbed by extern interrupts at some point. I don't know why, it seems the PIC just ignored the external interrupts.

We're using Pasemi 1682M part, which integrated a openpic compatible PIC. But the CPU part has 2 cores. There're 3 kinds of interrupts:

several internal interrupts - priority 8
one external interrupt - priority 8
IPI - priority 10

Thanks,
Gavin