Skip to contentSkip to conversation

Removing Atmel from ARM926EJ-S Systems

PATCH New Matthias Weisser 3 participants 5 messages Jan 18, 2010 – Jan 21, 2010 Kbuild

lore
Share & tools
lore

Matthias Weisser

author
#0 lore raw

PATCH 1/1 Removing Atmel from ARM926EJ-S Systems

Signed-off-by Matthias Weisser <[email protected]>
---
 Makefile |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
Makefile +1 -1
index ed6156f..ffe07ef 100644
@@ -2698,7 +2698,7 @@ mp2usb_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
 
 #########################################################################
-## Atmel ARM926EJ-S Systems
+## ARM926EJ-S Systems
 #########################################################################
 
 afeb9260_config:	unconfig
Signature · 1 line
1.5.6.3
#1 lore raw

PATCH 1/1 Removing Atmel from ARM926EJ-S Systems

Quoted 10 lines · Matthias Weisser
Signed-off-by Matthias Weisser <[email protected]>
---
 Makefile |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
Makefile +0 -0
index ed6156f..ffe07ef 100644

Makefile mp2usb_config : unconfig · line 2704

Quoted 8 lines
Makefile +1 -1
@@ -2698,7 +2698,7 @@ mp2usb_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
 
 #########################################################################
-## Atmel ARM926EJ-S Systems
+## ARM926EJ-S Systems
 #########################################################################
 
 afeb9260_config:	unconfig

I'm not sure I get the rationale for this change - all the boards listed there are actually built around ARM926-based Atmel SoCs.

Regards,

Signature · 1 line
Albin Tonnerre
author
#2 lore raw

PATCH 1/1 Removing Atmel from ARM926EJ-S Systems

Am 18.01.2010 11:08, schrieb Albin Tonnerre:

Quoted 18 lines · Matthias Weisser
Quoted 17 lines
Signed-off-by Matthias Weisser<[email protected]>
---
  Makefile |    2 +-
  1 files changed, 1 insertions(+), 1 deletions(-)
Makefile +1 -1
index ed6156f..ffe07ef 100644
@@ -2698,7 +2698,7 @@ mp2usb_config	:	unconfig
  	@$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
 
  #########################################################################
-## Atmel ARM926EJ-S Systems
+## ARM926EJ-S Systems
  #########################################################################
Quoted 4 lines

Makefile mp2usb_config : unconfig · line 2704

Quoted 1 line
Makefile +0 -0
  afeb9260_config:	unconfig

I'm not sure I get the rationale for this change - all the boards listed there are actually built around ARM926-based Atmel SoCs.

Please see http://lists.denx.de/pipermail/u-boot/2010-January/066596.html

I will come up with a patch set adding support for a non Atmel based SoC and Wolfgang suggested to remove the Atmel from the section.

Regards,
Matthias

#3 lore raw

PATCH 1/1 Removing Atmel from ARM926EJ-S Systems

Quoted 8 lines · Matthias Wei?er

Am 18.01.2010 11:08, schrieb Albin Tonnerre:

Quoted 2 lines

I'm not sure I get the rationale for this change - all the boards listed there are actually built around ARM926-based Atmel SoCs.

Please see http://lists.denx.de/pipermail/u-boot/2010-January/066596.html

I will come up with a patch set adding support for a non Atmel based SoC and Wolfgang suggested to remove the Atmel from the section.

Oh, hadn't seen this message, sorry for the noise.

Regards,

Signature · 4 lines
Albin Tonnerre, Free Electrons
Kernel, drivers and embedded Linux development,
consulting, training and support.
http://free-electrons.com
Applied
#4 lore raw

PATCH 1/1 Removing Atmel from ARM926EJ-S Systems

In reply to Matthias Weisser

Dear Matthias Weisser,

Quoted 4 lines · In message <[email protected]> you wrote:
Signed-off-by Matthias Weisser <[email protected]>
---
 Makefile |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Der Dativ ist dem Genitiv sein Tod.