Skip to contentSkip to conversation

e1000e and Intel 82578DM, 10 Mbit/s only

DISCUSSION Rainer Koenig 2 participants 2 messages Jan 22, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hi,

I'm currently facing a problem on Intel Ibexpeak mainboards that have the Intel 82578DM chip for LAN. Device ID is 8086:10ef.

When using the e1000e driver that comes with distributions like
- Fedora 12
- RHEL 5.4
- openSUSE 11.2

then I only get the link up with 10 Mbit/s instead of 1000 Mbit/s.

Driver version is 1.0.2-k2 (according to modinfo)

If I use the e1000e from Sourceforge (Version 1.0.15 or 1.1.2) then the machine gets the correct Gigabit link.

So some questions on the e1000e kernel driver:

- will the necessary patches be merged from the sourceforge driver to the vanilla driver?

- why is the modinfo version so "static" on this driver? I've seen lots of patches on the list archives and in git, but modversion seems to be an universal constant at "1.0.2-k2"?

The bad impact of this problem is that with this bug of the kernel driver systems affected by this will not pass trough a Red Hat hardware certification network test. So guess what my current problem is: yeah, right I should do hardware certification with this LAN.

Thanks for your attention & regards
Rainer

Signature · 15 lines
Dipl.-Inf. (FH) Rainer Koenig
Project Manager Linux Business Clients
Dept. TSP CLI R&D SW OSE

Fujitsu Technology Solutions
Bürgermeister-Ullrich-Str. 100
86199 Augsburg
Germany

Telephone: +49-821-804-3321
Telefax:   +49-821-804-2131
Mail:      mailto:[email protected]

Internet         ts.fujtsu.com
Company Details  ts.fujitsu.com/imprint.html
#1 lore raw
Quoted 51 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Rainer Koenig
Sent: Friday, January 22, 2010 5:40 AM
To: [email protected]
Subject: e1000e and Intel 82578DM, 10 Mbit/s only

Hi,

I'm currently facing a problem on Intel Ibexpeak mainboards that have the Intel 82578DM chip for LAN. Device ID is 8086:10ef.

When using the e1000e driver that comes with distributions like
- Fedora 12
- RHEL 5.4
- openSUSE 11.2

then I only get the link up with 10 Mbit/s instead of 1000 Mbit/s.

Driver version is 1.0.2-k2 (according to modinfo)

If I use the e1000e from Sourceforge (Version 1.0.15 or 1.1.2) then the machine gets the correct Gigabit link.

So some questions on the e1000e kernel driver:

- will the necessary patches be merged from the sourceforge driver to the vanilla driver?

- why is the modinfo version so "static" on this driver? I've seen lots of patches on the list archives and in git, but modversion seems to be an universal constant at "1.0.2-k2"?

The bad impact of this problem is that with this bug of the kernel driver systems affected by this will not pass trough a Red Hat hardware certification network test. So guess what my current problem is: yeah, right I should do hardware certification with this LAN.

Thanks for your attention & regards
Rainer
--
Dipl.-Inf. (FH) Rainer Koenig
Project Manager Linux Business Clients
Dept. TSP CLI R&D SW OSE

Fujitsu Technology Solutions
Bürgermeister-Ullrich-Str. 100
86199 Augsburg
Germany

Quoted 6 lines
Telephone: +49-821-804-3321
Telefax:   +49-821-804-2131
Mail:      mailto:[email protected]

Internet ts.fujtsu.com
Company Details ts.fujitsu.com/imprint.html

A patch to resolve this issue has already been committed upstream.

commit f523d2114e93c559dbcf1b49d46b339fc0eda37a

Author: Bruce Allan <[email protected]>
Date:   Thu Oct 29 13:45:45 2009 +0000

e1000e: config PHY via software after resets

On PCH-based (82577/82578) and some ICH8-based parts (82566) there is an issue with the hardware automatically configuring the PHY with contents from the EEPROM after the PHY is reset, so do the configuration by the driver instead. This was already similarly done for some 82566 parts in e1000_phy_hw_reset_ich8lan() but needs to be done after other resets, so move the PHY configuration code to its own function and call after all PHY resets.