ARM pull request
Wolfgang,
Please pull from ARM master-sync
Thanks,
Tom
The following changes since commit 57ae8a5cced612088104303777e71a3dc89c00ef:
Detlev Zundel (1):
mpc512x: Use in/out accessors for all registers
are available in the git repository at:
git://git.denx.de/u-boot-arm master-sync
Daniel Gorsulowski (1):
at91: Enable slow master clock on meesc board
Minkyu Kang (1):
s5pc1xx: update cache routines
Prafulla Wadaskar (2):
Kirkwood: Upgated licencing for files imported from linux source to GPLv2
or later
Kirkwood: Makefile cleanup- fixed ordering (cosmetic change)
Seunghyeon Rhee (1):
samsung: fix DMC1_MEM_CFG for s3c64xx
Tom Rix (1):
ARM Update mach-types
Vipin KUMAR (12):
SPEAr : Adding README.spear in doc
SPEAr : Adding basic SPEAr architecture support. SPEAr : i2c driver support added for SPEAr SoCs SPEAr : smi driver support for SPEAr SoCs
SPEAr : nand driver support for SPEAr SoCs
SPEAr : usbd driver support for SPEAr SoCs
SPEAr : Support added for SPEAr600 board
SPEAr : Support for HW mac id read/write from i2c mem SPEAr : Support added for SPEAr300 board
SPEAr : emi controller initialization for CFI driver support SPEAr : Support added for SPEAr310 board
SPEAr : Support added for SPEAr320 board
MAKEALL | 4 + Makefile | 8 + board/esd/meesc/meesc.c | 26 + board/spear/common/Makefile | 54 ++ board/spear/common/spr_lowlevel_init.S | 195 ++++ board/spear/common/spr_misc.c | 296 ++++++ board/spear/spear300/Makefile | 51 + board/spear/spear300/config.mk | 39 + .../cache.c => board/spear/spear300/spear300.c | 43 +- board/spear/spear310/Makefile | 51 + board/spear/spear310/config.mk | 44 + board/spear/spear310/spear310.c | 59 ++ board/spear/spear320/Makefile | 51 + board/spear/spear320/config.mk | 44 + board/spear/spear320/spear320.c | 59 ++ board/spear/spear600/Makefile | 51 + board/spear/spear600/config.mk | 39 + .../cache.c => board/spear/spear600/spear600.c | 38 +- cpu/arm926ejs/kirkwood/Makefile | 4 +- cpu/arm926ejs/spear/Makefile | 52 + .../s5pc1xx/cache.c => arm926ejs/spear/reset.c} | 41 +- cpu/arm926ejs/spear/timer.c | 153 +++ cpu/arm_cortexa8/s5pc1xx/Makefile | 4 +- cpu/arm_cortexa8/s5pc1xx/cache.S | 120 +++ doc/README.spear | 48 + drivers/gpio/kw_gpio.c | 20 +- drivers/i2c/Makefile | 1 + drivers/i2c/kirkwood_i2c.c | 23 +- drivers/i2c/spr_i2c.c | 331 +++++++ drivers/mtd/Makefile | 1 + drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/spr_nand.c | 124 +++ drivers/mtd/spr_smi.c | 523 ++++++++++ drivers/serial/usbtty.h | 2 + drivers/usb/gadget/Makefile | 1 + drivers/usb/gadget/spr_udc.c | 998 ++++++++++++++++++++ include/asm-arm/arch-kirkwood/gpio.h | 20 +- include/asm-arm/arch-kirkwood/mpp.h | 20 +- include/asm-arm/arch-s3c64xx/s3c6400.h | 4 +- .../asm-arm/arch-s5pc1xx/sys_proto.h | 27 +- include/asm-arm/arch-spear/hardware.h | 66 ++ .../asm-arm/arch-spear/spr_defs.h | 39 +- .../asm-arm/arch-spear/spr_emi.h | 47 +- include/asm-arm/arch-spear/spr_gpt.h | 85 ++ include/asm-arm/arch-spear/spr_i2c.h | 146 +++ include/asm-arm/arch-spear/spr_misc.h | 130 +++ include/asm-arm/arch-spear/spr_nand.h | 57 ++ include/asm-arm/arch-spear/spr_smi.h | 115 +++ .../asm-arm/arch-spear/spr_syscntl.h | 39 +- include/asm-arm/arch-spear/spr_xloader_table.h | 67 ++ include/asm-arm/mach-types.h | 351 +++++++ include/configs/meesc.h | 1 + include/configs/smdkc100.h | 2 - include/configs/spear-common.h | 213 +++++ include/configs/spear3xx.h | 131 +++ .../s5pc1xx/cache.c => include/configs/spear6xx.h | 38 +- include/usb/spr_udc.h | 230 +++++ 57 files changed, 5266 insertions(+), 161 deletions(-)
create mode 100644 board/spear/common/Makefile
create mode 100755 board/spear/common/spr_lowlevel_init.S
create mode 100755 board/spear/common/spr_misc.c
create mode 100755 board/spear/spear300/Makefile
create mode 100755 board/spear/spear300/config.mk
copy cpu/arm_cortexa8/s5pc1xx/cache.c => board/spear/spear300/spear300.c (50%) mode change 100644 => 100755
create mode 100755 board/spear/spear310/Makefile
create mode 100755 board/spear/spear310/config.mk
create mode 100755 board/spear/spear310/spear310.c
create mode 100755 board/spear/spear320/Makefile
create mode 100755 board/spear/spear320/config.mk
create mode 100755 board/spear/spear320/spear320.c
create mode 100755 board/spear/spear600/Makefile
create mode 100755 board/spear/spear600/config.mk
copy cpu/arm_cortexa8/s5pc1xx/cache.c => board/spear/spear600/spear600.c (53%) mode change 100644 => 100755
create mode 100755 cpu/arm926ejs/spear/Makefile
copy cpu/{arm_cortexa8/s5pc1xx/cache.c => arm926ejs/spear/reset.c} (54%) mode change 100644 => 100755
create mode 100755 cpu/arm926ejs/spear/timer.c
create mode 100644 cpu/arm_cortexa8/s5pc1xx/cache.S
create mode 100644 doc/README.spear
mode change 100644 => 100755 drivers/i2c/Makefile
create mode 100755 drivers/i2c/spr_i2c.c
mode change 100644 => 100755 drivers/mtd/Makefile
create mode 100755 drivers/mtd/nand/spr_nand.c
create mode 100755 drivers/mtd/spr_smi.c
mode change 100644 => 100755 drivers/serial/usbtty.h
mode change 100644 => 100755 drivers/usb/gadget/Makefile
create mode 100755 drivers/usb/gadget/spr_udc.c
copy cpu/arm_cortexa8/s5pc1xx/cache.c =>include/asm-arm/arch-s5pc1xx/sys_proto.h (61%)
create mode 100644 include/asm-arm/arch-spear/hardware.h
copy cpu/arm_cortexa8/s5pc1xx/cache.c => include/asm-arm/arch-spear/spr_defs.h
(58%)
copy cpu/arm_cortexa8/s5pc1xx/cache.c => include/asm-arm/arch-spear/spr_emi.h
(58%)
create mode 100755 include/asm-arm/arch-spear/spr_gpt.h
create mode 100755 include/asm-arm/arch-spear/spr_i2c.h
create mode 100644 include/asm-arm/arch-spear/spr_misc.h
create mode 100644 include/asm-arm/arch-spear/spr_nand.h
create mode 100755 include/asm-arm/arch-spear/spr_smi.h
copy cpu/arm_cortexa8/s5pc1xx/cache.c =>include/asm-arm/arch-spear/spr_syscntl.h (58%)
create mode 100755 include/asm-arm/arch-spear/spr_xloader_table.h create mode 100644 include/configs/spear-common.h
create mode 100755 include/configs/spear3xx.h
rename cpu/arm_cortexa8/s5pc1xx/cache.c => include/configs/spear6xx.h (54%) mode change 100644 => 100755
create mode 100755 include/usb/spr_udc.h
Wolfgang Denk
AppliedDear Tom,
Quoted 2 lines · In message <[email protected]> you wrote:
Please pull from ARM master-sync
Can you please try and use the "master" branch for such pull requests? Thanks.
Quoted 9 lines
Daniel Gorsulowski (1):
at91: Enable slow master clock on meesc boardMinkyu Kang (1):
s5pc1xx: update cache routinesPrafulla Wadaskar (2):
Kirkwood: Upgated licencing for files imported from linux source to GPLv2
or later
I cannot find any patch with this subject anywhere. Can you please try and avoid to change the patch subjects?
BTW: what's "Upgated"? ;-)
Quoted 8 lines
Kirkwood:
Makefilecleanup- fixed ordering (cosmetic change)Seunghyeon Rhee (1):
samsung: fixDMC1_MEM_CFGfor s3c64xxTom Rix (1):
ARM Update mach-types
Quoted 13 lines
Vipin KUMAR (12):
SPEAr : Adding README.spear in doc
SPEAr : Adding basic SPEAr architecture support. SPEAr : i2c driver support added for SPEAr SoCs SPEAr : smi driver support for SPEAr SoCs
SPEAr : nand driver support for SPEAr SoCs
SPEAr : usbd driver support for SPEAr SoCs
SPEAr : Support added for SPEAr600 board
SPEAr : Support for HW mac id read/write from i2c mem SPEAr : Support added for SPEAr300 board
SPEAr : emi controller initialization for CFI driver support SPEAr : Support added for SPEAr310 board
SPEAr : Support added for SPEAr320 board
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Q: Why do mountain climbers rope themselves together? A: To prevent the sensible ones from going home.
Quoted 6 lines · Wolfgang Denk
Dear Tom,
Quoted 1 line · In message <[email protected]> you wrote:
Please pull from ARM master-sync
Can you please try and use the "master" branch for such pull requests?
Ok.
At the current time arm/master is merged with u-boot/master arm/master-sync is rebased with u-boot/master
You would not want to pull from arm/master at this time.
In the future I will use arm/master
Quoted 8 lines
Thanks.
Quoted 6 lines
Daniel Gorsulowski (1):
at91: Enable slow master clock on meesc boardMinkyu Kang (1):
s5pc1xx: update cache routines
Quoted 6 lines
Quoted 3 lines
Prafulla Wadaskar (2):
Kirkwood: Upgated licencing for files imported from linux source to GPLv2
or laterI cannot find any patch with this subject anywhere. Can you please try and avoid to change the patch subjects?
This came from the latest marvell pull request. I discussed the copyright change with you off-line.
Tom
Dear Tom,
Quoted 2 lines · In message <[email protected]> you wrote:
In the future I will use arm/master
Thanks.
Quoted 9 lines
Quoted 6 lines
Quoted 3 lines
Prafulla Wadaskar (2):
Kirkwood: Upgated licencing for files imported from linux source to GPLv2
or laterI cannot find any patch with this subject anywhere. Can you please try and avoid to change the patch subjects?
This came from the latest marvell pull request. I discussed the copyright change with you off-line.
I've seen a patch with a pretty similar subject on the list, and I assumed this was the one, but with changed / edited subject. Was this not the case? Was this another patch?
Please make sure that only patches go into your repo that have been posted to the ML before.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Things that try to look like things often do look more like things than things. Well-known fact. - Terry Pratchett, _Wyrd Sisters_
Quoted 25 lines
-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Wolfgang Denk
Sent: Saturday, January 23, 2010 10:18 PM
To: Tom
Cc: u-boot at lists.denx.de
Subject: Re: [U-Boot] ARM pull requestDear Tom,
Quoted 2 lines · In message <[email protected]> you wrote:
Please pull from ARM master-sync
Can you please try and use the "master" branch for such pull requests? Thanks.
Quoted 6 lines
Daniel Gorsulowski (1):
at91: Enable slow master clock on meesc boardMinkyu Kang (1):
s5pc1xx: update cache routines
Quoted 7 lines
Quoted 2 lines
Prafulla Wadaskar (2):
Kirkwood: Upgated licencing for files imported fromlinux source to GPLv2
Quoted 1 line
or later
I cannot find any patch with this subject anywhere. Can you please try and avoid to change the patch subjects?
Hi Wolfgang
Yes, the subject is changed, this is my mistake while sending pull request. Can you pls pull in http://lists.denx.de/pipermail/u-boot/2009-December/065799.html instead?
Or
Shall I generate new pull request for the same?
Quoted 2 lines
BTW: what's "Upgated"? ;-)
Oh, this is spelling mistake :-(
I am very sorry for this
Regards..
Prafulla . .
Dear Prafulla,
Quoted 4 lines · In message <[email protected]>…
Quoted 4 lines
Quoted 3 lines
Prafulla Wadaskar (2):
Kirkwood: Upgated licencing for files imported from linux source to GPLv2 or later
Quoted 8 lines
Quoted 2 lines
I cannot find any patch with this subject anywhere. Can you please try and avoid to change the patch subjects?
Yes, the subject is changed, this is my mistake while sending pull request. Can you pls pull in http://lists.denx.de/pipermail/u-boot/2009-December/065799.html instead?
Or
Shall I generate new pull request for the same?
Sorry, but it is too late now. The code is already in mainline.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "One planet is all you get."