Orion: Add Buffalo Linkstation LS-HGL support
PATCH 1/1 Orion: Add Buffalo Linkstation LS-HGL support
This patch adds support for Buffalo Linkstation LS-HGL platform.
Signed-off-by Zhu Qingsen <[email protected]>
--- arch/arm/configs/orion5x_defconfig | 1 + arch/arm/mach-orion5x/Kconfig | 7 + arch/arm/mach-orion5x/Makefile | 1 + arch/arm/mach-orion5x/ls_hgl-setup.c | 278 ++++++++++++++++++++++++++++++++++ 4 files changed, 287 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-orion5x/ls_hgl-setup.c
arch/arm/configs/orion5x_defconfig +1 -0
@@ -192,6 +192,7 @@ CONFIG_MACH_TS209=y CONFIG_MACH_TERASTATION_PRO2=y CONFIG_MACH_LINKSTATION_PRO=y CONFIG_MACH_LINKSTATION_MINI=y +CONFIG_MACH_LINKSTATION_LS_HGL=y CONFIG_MACH_TS409=y CONFIG_MACH_WRT350N_V2=y CONFIG_MACH_TS78XX=y
arch/arm/mach-orion5x/Kconfig +7 -0
@@ -57,6 +57,13 @@ config MACH_LINKSTATION_MINI Say 'Y' here if you want your kernel to support the Buffalo Linkstation Mini platform. +config MACH_LINKSTATION_LS_HGL + bool "Buffalo Linkstation LS-HGL" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + Buffalo Linkstation LS-HGL platform. + config MACH_TS409 bool "QNAP TS-409" help
arch/arm/mach-orion5x/Makefile +1 -0
@@ -5,6 +5,7 @@ obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o obj-$(CONFIG_MACH_TERASTATION_PRO2) += terastation_pro2-setup.o obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o +obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o obj-$(CONFIG_MACH_DNS323) += dns323-setup.o obj-$(CONFIG_MACH_TS209) += ts209-setup.o tsx09-common.o obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o
arch/arm/mach-orion5x/ls_hgl-setup.c new file +278 -0
278 lines not on this page · raw message
Signature · 1 line
1.6.5