new board (eb_cpux9k2)

* support for EB+CPUx9K2 board by BuS Elektronik GmbH & Co. KG
* select via make eb_cpux9k2_config
* this also demonstrates, how to use boards with AT91RM9200 cpu in at91 arch tree

Signed-off-by Jens Scharsig <[email protected]>

---
 MAINTAINERS                    |   14 +-
 MAKEALL                        |    1 +
 Makefile                       |    3 +
 board/BuS/eb_cpux9k2/Makefile  |   51 +++++
 board/BuS/eb_cpux9k2/config.mk |    1 +
 board/BuS/eb_cpux9k2/cpux9k2.c |  420 +++++++++++++++++++++++++++++++++++++++
 include/configs/eb_cpux9k2.h   |  427 ++++++++++++++++++++++++++++++++++++++++
 7 files changed, 912 insertions(+), 5 deletions(-)
 create mode 100644 board/BuS/eb_cpux9k2/Makefile
 create mode 100644 board/BuS/eb_cpux9k2/config.mk
 create mode 100644 board/BuS/eb_cpux9k2/cpux9k2.c
 create mode 100644 include/configs/eb_cpux9k2.h

MAINTAINERS +0 -0

index 3879fde..0a0cf7c 100644

MAINTAINERS +2 -2

 	FLAGADM		MPC823
 

@@ -579,7 +579,7 @@ Sedji Gaouaou<[email protected]>
 	at91sam9g10ek		ARM926EJS (AT91SAM9G10 SoC)
 	at91sam9m10g45ek	ARM926EJS (AT91SAM9G45 SoC)
 
-Marius Gr?ger <[email protected]>
+Marius Gr???ger <[email protected]>
 
 	impa7		ARM720T (EP7211)
 	ep7312		ARM720T (EP7312)

@@ -645,7 +645,7 @@ Nishanth Menon <[email protected]>
 	omap3_sdp3430	ARM CORTEX-A8 (OMAP3xx SoC)
 	omap3_zoom1	ARM CORTEX-A8 (OMAP3xx SoC)
 
-David M?ller <[email protected]>
+David M???ller <[email protected]>
 
 	smdk2410	ARM920T
 	VCMA9		ARM920T

MAINTAINERS +2 -2

 Robert Schwebel <[email protected]>
 
 	csb226		xscale

@@ -749,7 +753,7 @@ Richard Woodruff <[email protected]>
 
 	omap2420h4	ARM1136EJS
 
-Alex Z?pke <[email protected]>
+Alex Z???pke <[email protected]>
 
 	lart		SA1100
 	dnp1110		SA1110

@@ -774,7 +778,7 @@ Unknown / orphaned boards:
 #	Board		CPU						#
 #########################################################################
 
-Daniel Engstr?m <[email protected]>
+Daniel Engstr???m <[email protected]>
 
 	sc520_cdp	x86
 

MAKEALL +1 -0

index dd635bd..980834f 100755
@@ -650,6 +650,7 @@ LIST_at91="			\
 	CPU9260			\
 	CPU9G20			\
 	csb637			\
+	eb_cpux9k2		\
 	kb9202			\
 	meesc			\
 	mp2usb			\

Makefile +3 -0

index 793fcec..375f168 100644
@@ -2693,6 +2693,9 @@ CPUAT91_config	:	unconfig
 csb637_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
 
+eb_cpux9k2_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm920t eb_cpux9k2 BuS at91
+
 kb9202_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
 

board/BuS/eb_cpux9k2/Makefile new file +19 -0

new file mode 100644
index 0000000..30e2f18
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software

board/BuS/eb_cpux9k2/Makefile new file +22 -0

+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/BuS/eb_cpux9k2/config.mk new file +1 -0

new file mode 100644
index 0000000..ff2cfd1
@@ -0,0 +1 @@
+TEXT_BASE = 0x23f00000

board/BuS/eb_cpux9k2/cpux9k2.c new file +69 -0

new file mode 100644
index 0000000..b2a69df
@@ -0,0 +1,420 @@
+/*
+ * (C) Copyright 2008-2009
+ * BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de>
+ * Jens Scharsig <[email protected]>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <exports.h>
+#include <net.h>
+#include <netdev.h>
+#include <nand.h>
+
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_mc.h>
+
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+#endif
+
+#ifdef CONFIG_VIDEO
+#include <bus_vcxk.h>
+
+extern unsigned long display_width;
+extern unsigned long display_height;
+#endif
+
+#ifdef CONFIG_CMD_NAND
+void cpux9k2_nand_hw_init(void);
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+int board_init(void)
+{
+	at91_pio_t *pio	= (at91_pio_t *) AT91_PIO_BASE;
+	/* Enable Ctrlc */
+	console_init_f();
+
+	/* Correct IRDA resistor problem / Set PA23_TXD in Output */
+	writel(AT91_PMX_AA_TXD2, &pio->pioa.oer);
+
+	gd->bd->bi_arch_number = MACH_TYPE_EB_CPUX9K2;
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;

board/BuS/eb_cpux9k2/cpux9k2.c new file +78 -0

+	if (getenv("ethaddr") == NULL) {
+		if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x00,
+				CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
+				(uchar *) &mac, sizeof(mac)) != 0) {
+			puts("Error reading MAC from EEPROM\n");
+		} else {
+			tm = 0;
+			macn6 = 0;
+			macn7 = 0xFF;
+			for (midx = 0; midx < 6; midx++) {
+				if ((mac[midx] != 0) && (mac[midx] != 0xFF))
+					tm++;
+				macn6 += mac[midx];
+				macn7 ^= mac[midx];
+			}
+			if ((macn6 != mac[6]) || (macn7 != mac[7]))
+				tm = 0;
+			if (tm)
+				eth_setenv_enetaddr("ethaddr", mac);
+			 else
+				puts("Error: invalid MAC at EEPROM\n");
+		}
+	}
+	gd->jt[XF_do_reset] = (void *) do_reset;
+
+#ifdef CONFIG_STATUS_LED
+	status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+	udelay(10000);
+	eth_init(gd->bd);
+}
+#endif
+
+/*
+ * DRAM initialisations
+ */
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM;
+	gd->bd->bi_dram[0].size =
+		get_ram_size((volatile long *) PHYS_SDRAM, PHYS_SDRAM_SIZE);
+	return 0;
+}
+
+/*
+ * Ethernet initialisations
+ */
+
+#ifdef CONFIG_DRIVER_AT91EMAC
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+	rc = at91emac_register(bis, (u32) AT91_EMAC_BASE);
+	return rc;
+}
+#endif
+
+/*
+ * Disk On Chip (NAND) Millenium initialization.
+ * The NAND lives in the CS2* space
+ */
+#if defined(CONFIG_CMD_NAND)
+
+#define	MASK_ALE	(1 << 22)	/* our ALE is AD22 */
+#define	MASK_CLE	(1 << 21)	/* our CLE is AD21 */
+
+void cpux9k2_nand_hw_init(void)
+{
+	unsigned long csr;
+	at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+	at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;

board/BuS/eb_cpux9k2/cpux9k2.c new file +154 -0

+	writel(csr, &mc->smc.csr[3]);
+
+	writel(AT91_PMX_CA_SMOE | AT91_PMX_CA_SMWE, &pio->pioc.asr);
+	writel(AT91_PMX_CA_BFCK | AT91_PMX_CA_SMOE | AT91_PMX_CA_SMWE,
+		&pio->pioc.pdr);
+
+	/* Configure PC2 as input (signal Nand READY ) */
+	writel(AT91_PMX_CA_BFAVD, &pio->pioc.per);
+	writel(AT91_PMX_CA_BFAVD, &pio->pioc.odr); /* disable output */
+	writel(AT91_PMX_CA_BFCK, &pio->pioc.codr);
+
+	/* PIOC clock enabling */
+	writel(1 << AT91_ID_PIOC, &pmc->pcer);
+}
+
+static void board_nand_hwcontrol(struct mtd_info *mtd,
+	int cmd, unsigned int ctrl)
+{
+	at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+	struct nand_chip *this = mtd->priv;
+	ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
+
+		if (ctrl & NAND_CLE)
+			IO_ADDR_W |= MASK_CLE;
+		if (ctrl & NAND_ALE)
+			IO_ADDR_W |= MASK_ALE;
+
+		if ((ctrl & NAND_NCE))
+			writel(AT91_PIN_TO_MASK(0), &pio->pioc.codr);
+		else
+			writel(AT91_PIN_TO_MASK(0), &pio->pioc.sodr);
+
+		this->IO_ADDR_W = (void *) IO_ADDR_W;
+	}
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
+}
+
+static int board_nand_dev_ready(struct mtd_info *mtd)
+{
+	at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+	return ((readl(&pio->pioc.pdsr) & AT91_PIN_TO_MASK(2)) != 0);
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+	cpux9k2_nand_hw_init();
+	nand->ecc.mode = NAND_ECC_SOFT;
+	nand->cmd_ctrl = board_nand_hwcontrol;
+	nand->dev_ready = board_nand_dev_ready;
+	nand->chip_delay = 20;
+	return 0;
+}
+
+#endif
+
+#if defined(CONFIG_VIDEO)
+/*
+ * drv_video_init
+ * FUNCTION: initialize VCxK device
+ */
+
+int drv_video_init(void)
+{
+#ifdef CONFIG_SPLASH_SCREEN
+	unsigned long splash;
+#endif
+	char *s;
+	unsigned long csr;
+	at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+	at91_mc_t *mc = (at91_mc_t *) AT91_MC_BASE;
+
+	printf("Init Video as ");
+	s = getenv("displaywidth");
+	if (s != NULL)
+		display_width = simple_strtoul(s, NULL, 10);
+	else
+		display_width = 256;
+	s = getenv("displayheight");
+	if (s != NULL)
+		display_height = simple_strtoul(s, NULL, 10);
+	else
+		display_height = 256;
+	printf("%ld x %ld pixel matrix\n", display_width, display_height);
+
+	/* RWH = 7 | RWS =7  | TDF = 15 | NWS = 0x7F */
+	csr =  	AT91_SMC_CSR_RWHOLD(7) | AT91_SMC_CSR_RWSETUP(7) |
+		AT91_SMC_CSR_TDF(15) | AT91_SMC_CSR_NWS(127) |
+		AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_16 |
+		AT91_SMC_CSR_BAT_16 | AT91_SMC_CSR_WSEN;
+	writel(csr, &mc->smc.csr[2]);
+	writel(1 << AT91_ID_PIOB, &pmc->pcer);
+
+	vcxk_init(display_width, display_height);
+#ifdef CONFIG_SPLASH_SCREEN
+	s = getenv("splashimage");
+	if (s != NULL) {
+		splash = simple_strtoul(s, NULL, 16);
+		printf("use splashimage: %lx\n", splash);
+		video_display_bitmap(splash, 0, 0);
+	}
+#endif
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_SOFT_I2C
+
+void i2c_init_board(void)
+{
+	u32 pin;
+	at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+	at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+
+	writel(1 << AT91_ID_PIOA, &pmc->pcer);
+	pin = AT91_PMX_AA_TWD | AT91_PMX_AA_TWCK;
+	writel(pin, &pio->pioa.idr);
+	writel(pin, &pio->pioa.pudr);
+	writel(pin, &pio->pioa.per);
+	writel(pin, &pio->pioa.oer);
+	writel(pin, &pio->pioa.sodr);
+}
+
+/*
+void board_i2c_active(void)
+{
+	at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+	writel(AT91_PMX_AA_TWD, &pio->pioa.mddr);
+}
+
+void board_i2c_tristate(void)
+{
+	at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+	writel(AT91_PMX_AA_TWD, &pio->pioa.mder);
+}
+
+int board_i2c_read(void)
+{
+	at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+	return ((readl(&pio->pioa.pdsr) & AT91_PMX_AA_TWD) != 0);
+}
+
+void board_i2c_sda(int bit)
+{
+	at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+	if (bit)
+		writel(AT91_PMX_AA_TWD, &pio->pioa.sodr);
+	else
+		writel(AT91_PMX_AA_TWD, &pio->pioa.codr);
+}
+

board/BuS/eb_cpux9k2/cpux9k2.c new file +82 -0

+#endif
+
+/*--------------------------------------------------------------------------*/
+
+#ifdef CONFIG_STATUS_LED
+
+void __led_toggle(led_id_t mask)
+{
+	at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+
+	if (readl(&pio->piod.odsr) & mask)
+		writel(mask, &pio->piod.codr);
+	else
+		writel(mask, &pio->piod.codr);
+}
+
+void __led_init(led_id_t mask, int state)
+{
+	at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+	at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+
+	writel(1 << AT91_ID_PIOD, &pmc->pcer);	/* Enable PIOB clock */
+	/* Disable peripherals on LEDs */
+	writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.per);
+	/* Enable pins as outputs */
+	writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.oer);
+	/* Turn all LEDs OFF */
+	writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.sodr);
+
+	__led_set(mask, state);
+}
+
+void __led_set(led_id_t mask, int state)
+{
+	at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+	if (state == STATUS_LED_ON)
+		writel(mask, &pio->piod.codr);
+	else
+		writel(mask, &pio->piod.sodr);
+}
+
+#endif
+
+/*---------------------------------------------------------------------------*/
+
+int do_brightness(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int rcode = 0;
+	ulong side;
+	ulong bright;
+
+	switch (argc) {
+	case 3:
+		side = simple_strtoul(argv[1], NULL, 10);
+		bright = simple_strtoul(argv[2], NULL, 10);
+		if ((side >= 0) && (side <= 3) &&
+				(bright >= 0) && (bright <= 1000)) {
+			vcxk_setbrightness(side, bright);
+			rcode = 0;
+		} else {
+			printf("parameters out of range\n");
+			printf("Usage:\n%s\n", cmdtp->usage);
+			rcode = 1;
+		}
+		break;
+	default:
+		printf("Usage:\n%s\n", cmdtp->usage);
+		rcode = 1;
+		break;
+	}
+	return rcode;
+}
+
+/*---------------------------------------------------------------------------*/
+
+U_BOOT_CMD(
+	bright,	3,	0,	do_brightness,
+	"bright  - sets the display brightness\n",
+	" <side> <0..1000>\n        side: 0/3=both; 1=first; 2=second\n"
+);
+
+/* EOF cpu9k2.c */

include/configs/eb_cpux9k2.h new file +23 -0

new file mode 100644
index 0000000..2f58e6d
@@ -0,0 +1,427 @@
+/*
+ * (C) Copyright 2008-2009
+ * BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de>
+ * Jens Scharsig <[email protected]>
+ *
+ * Configuation settings for the EB+CPUx9K2 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,

include/configs/eb_cpux9k2.h new file +199 -0

+#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
+#define CONFIG_AT91RM9200	1	/* It's an Atmel AT91RM9200 SoC	*/
+#define CONFIG_EB_CPUX9K2	1	/* on an EP+CPUX9K2 Board	*/
+#define USE_920T_MMU		1
+
+#include <asm/arch/hardware.h>	/* needed for port definitions */
+
+#define CONFIG_MISC_INIT_R
+
+/*--------------------------------------------------------------------------*/
+
+#define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
+
+#define CONFIG_SYS_BOOT_SIZE		0x00 /* 0 KBytes */
+#define CONFIG_SYS_U_BOOT_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_U_BOOT_SIZE		0x60000 /* 384 KBytes */
+
+
+#define CONFIG_BOOT_RETRY_TIME		30
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_SYS_PROMPT	"U-Boot> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE	512		/* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS	32		/* max number of command args */
+#define CONFIG_SYS_PBSIZE	\
+	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+
+#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
+
+/*
+ * ARM asynchronous clock
+ */
+
+#define AT91C_MAIN_CLOCK	179404800	/* from 12.288 MHz * 73 / 5 */
+#define AT91C_MASTER_CLOCK	(AT91C_MAIN_CLOCK / 3)
+#define CONFIG_SYS_HZ		1000
+#define CONFIG_SYS_HZ_CLOCK 	(AT91C_MASTER_CLOCK / 2)
+
+#define AT91_SLOW_CLOCK			32768		/* slow clock */
+
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+#define CONFIG_SYS_USE_MAIN_OSCILLATOR	1
+/* flash */
+#define CONFIG_SYS_EBI_CFGR_VAL		0x00000000
+#define CONFIG_SYS_SMC_CSR0_VAL		0x00003284 /* 16bit, 2 TDF, 4 WS */
+
+/* clocks */
+#define CONFIG_SYS_PLLAR_VAL		0x20483E05 /* 179.4048 MHz for PCK */
+#define CONFIG_SYS_PLLBR_VAL		0x104C3E0A /* 47.3088 MHz (for USB) */
+#define CONFIG_SYS_MCKR_VAL		0x00000202 /* PCK/3 = MCK Clock */
+
+/*
+ * Size of malloc() pool
+ */
+
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 520*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+
+/*
+ * sdram
+ */
+
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM 			0x20000000
+#define PHYS_SDRAM_SIZE			0x04000000  /* 64 megs */
+
+#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
+					PHYS_SDRAM_SIZE - 0x00400000 - \
+					CONFIG_SYS_MALLOC_LEN)
+
+#define CONFIG_SYS_PIOC_ASR_VAL		0xFFFF0000 /* PIOC as D16/D31 */
+#define CONFIG_SYS_PIOC_BSR_VAL		0x00000000
+#define CONFIG_SYS_PIOC_PDR_VAL		0xFFFF0000
+#define CONFIG_SYS_EBI_CSA_VAL		0x00000002 /* CS1=SDRAM */
+#define CONFIG_SYS_SDRC_CR_VAL		0x2188c159 /* set up the SDRAM */
+#define CONFIG_SYS_SDRAM		0x20000000 /* address of the SDRAM */
+#define CONFIG_SYS_SDRAM1		0x20000080 /* address of the SDRAM */
+#define CONFIG_SYS_SDRAM_VAL		0x00000000 /* value written to SDRAM */
+#define CONFIG_SYS_SDRC_MR_VAL		0x00000002 /* Precharge All */
+#define CONFIG_SYS_SDRC_MR_VAL1		0x00000004 /* refresh */
+#define CONFIG_SYS_SDRC_MR_VAL2		0x00000003 /* Load Mode Register */
+#define CONFIG_SYS_SDRC_MR_VAL3		0x00000000 /* Normal Mode */
+#define CONFIG_SYS_SDRC_TR_VAL		0x000002E0 /* Write refresh rate */
+
+/*
+ * Command line configuration
+ */
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BMP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_I2C_CMD_NO_FLAT
+#define CONFIG_I2C_CMD_TREE
+
+#define CONFIG_SYS_LONGHELP
+
+/*
+ * Filesystems
+ */
+
+#define CONFIG_JFFS2_NAND		1
+
+#ifndef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV 		"nand0"
+#define CONFIG_JFFS2_PART_OFFSET 	0
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#else
+#define MTDIDS_DEFAULT		"nor0=0,nand0=1"
+#define MTDPARTS_DEFAULT	"mtdparts="				\
+					"0:"				\
+					"384k(U-Boot),"			\
+					"128k(Env),"			\
+					"128k(Splash)," 		\
+					"4M(Kernel),"			\
+					"-(FS)"				\
+					";"				\
+					"1:"				\
+					"-(jffs2)"
+#endif /* CONFIG_JFFS2_CMDLINE */
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * UART/CONSOLE
+ */
+
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 19200, 38400, 57600, 9600 }
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_AT91RM9200_USART
+#define CONFIG_DBGU			/* define DBGU as console */
+
+/*
+ * network
+ */
+
+#define CONFIG_NET_RETRY_COUNT		10
+#define CONFIG_RESET_PHY_R		1
+
+#define CONFIG_NET_MULTI		1
+
+#ifdef CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AT91EMAC		1
+#define CONFIG_DRIVER_AT91EMAC_QUIET	1
+#define CONFIG_SYS_RX_ETH_BUFFER	8
+#define CONFIG_MII			1
+#else
+#define CONFIG_DRIVER_ETHER		1
+#endif
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * I2C-Bus
+ */
+
+#define CONFIG_SYS_I2C_SPEED		50000
+#define CONFIG_SYS_I2C_SLAVE		0 		/* not used */
+
+#ifndef CONFIG_HARD_I2C
+#define CONFIG_SOFT_I2C
+
+/* Software  I2C driver configuration */
+
+#define AT91_PIN_SDA			(1<<25)		/* AT91C_PIO_PA25 */
+#define AT91_PIN_SCL			(1<<26)		/* AT91C_PIO_PA26 */
+
+#define CONFIG_SYS_I2C_INIT_BOARD
+
+#define I2C_INIT	i2c_init_board();
+#define I2C_ACTIVE	writel(AT91_PMX_AA_TWD, &pio->pioa.mddr);
+#define I2C_TRISTATE	writel(AT91_PMX_AA_TWD, &pio->pioa.mder);
+#define I2C_READ	((readl(&pio->pioa.pdsr) & AT91_PMX_AA_TWD) != 0)
+#define I2C_SDA(bit)						\
+	if (bit)						\
+		writel(AT91_PMX_AA_TWD, &pio->pioa.sodr);	\
+	else							\
+		writel(AT91_PMX_AA_TWD, &pio->pioa.codr);
+#define I2C_SCL(bit)						\
+	if (bit)						\

MAINTAINERS Steve Sakoman <[email protected]> · line 709

Quoted 5 lines

MAINTAINERS +4 -0

+Jens Scharsig <[email protected]>
+
+	eb_cpux9k2	ARM920T (AT91RM9200 SoC)
+

The email does not match what was given in the
copyrights. Which is the real address ?