radio: Add radio-timb to the Kconfig and Makefile
PATCH v2 2/2 radio: Add radio-timb to the Kconfig and Makefile
This patch adds radio-timb to the Makefile and Kconfig.
---
drivers/media/radio/Kconfig +10 -0
@@ -429,4 +429,14 @@ config RADIO_TEF6862 To compile this driver as a module, choose M here: the module will be called TEF6862. +config RADIO_TIMBERDALE + tristate "Enable the Timberdale radio driver" + depends on MFD_TIMBERDALE && VIDEO_V4L2 && HAS_IOMEM + select RADIO_TEF6862 + select RADIO_SAA7706H + ---help--- + This is a kind of umbrella driver for the Radio Tuner and DSP + found behind the Timberdale FPGA on the Russellville board. + Enable this driver will automatically select the DSP and tuner. + endif # RADIO_ADAPTERS
drivers/media/radio/Makefile +1 -0
@@ -24,5 +24,6 @@ obj-$(CONFIG_RADIO_SI470X) += si470x/ obj-$(CONFIG_USB_MR800) += radio-mr800.o obj-$(CONFIG_RADIO_TEA5764) += radio-tea5764.o obj-$(CONFIG_RADIO_TEF6862) += tef6862.o +obj-$(CONFIG_RADIO_TIMBERDALE) += radio-timb.o EXTRA_CFLAGS += -Isound
Quoted 11 lines · On Wed, 27 Jan 2010 17:22:10 +0100 Richard Röjfors wrote:
This patch adds radio-timb to the
MakefileandKconfig.Signed-off-by Richard Röjfors <[email protected]>---
drivers/media/radio/Kconfig +0
-0@@ -429,4 +429,14 @@ config RADIO_TEF6862 To compile this driver as a module, choose M here: the module will be called TEF6862.
drivers/media/radio/Kconfig config RADIO_TEF6862 · line 440
Quoted 10 lines
drivers/media/radio/Kconfig +9
-0+config RADIO_TIMBERDALE + tristate "Enable the Timberdale radio driver" + depends on MFD_TIMBERDALE && VIDEO_V4L2 && HAS_IOMEM + select RADIO_TEF6862 + select RADIO_SAA7706H + ---help--- + This is a kind of umbrella driver for the Radio Tuner and DSP + found behind the Timberdale FPGA on the Russellville board. + Enable this driver will automatically select the DSP and tuner.
Enabling
Quoted 7 lines
drivers/media/radio/Kconfig +1
-0+ endif # RADIO_ADAPTERSdrivers/media/radio/Makefile +0
-0
drivers/media/radio/Makefile obj-$(CONFIG_RADIO_SI470X) += si470x/
Quoted 8 lines
drivers/media/radio/Makefile +1
-1@@ -24,5 +24,6 @@ obj-$(CONFIG_RADIO_SI470X) += si470x/ obj-$(CONFIG_USB_MR800) += radio-mr800.o obj-$(CONFIG_RADIO_TEA5764) += radio-tea5764.o obj-$(CONFIG_RADIO_TEF6862) += tef6862.o +obj-$(CONFIG_RADIO_TIMBERDALE) += radio-timb.o EXTRA_CFLAGS += -Isound --
---
~Randy
Quoted 9 lines · On Wednesday 27 January 2010 17:22:10 Richard Röjfors wrote:
This patch adds radio-timb to the
MakefileandKconfig.Signed-off-by Richard Röjfors <[email protected]>---
drivers/media/radio/Kconfig +0
-0
drivers/media/radio/Kconfig config RADIO_TEF6862 · line 434
Quoted 6 lines
drivers/media/radio/Kconfig +3
-0@@ -429,4 +429,14 @@ config RADIO_TEF6862 To compile this driver as a module, choose M here: the module will be called TEF6862. +config RADIO_TIMBERDALE + tristate "Enable the Timberdale radio driver" + depends on MFD_TIMBERDALE && VIDEO_V4L2 && HAS_IOMEM
I think you need a dependency on I2C as well.
Regards,
Hans
Quoted 21 lines
drivers/media/radio/Kconfig +7
-0+ select RADIO_TEF6862 + select RADIO_SAA7706H + ---help--- + This is a kind of umbrella driver for the Radio Tuner and DSP + found behind the Timberdale FPGA on the Russellville board. + Enable this driver will automatically select the DSP and tuner. + endif # RADIO_ADAPTERSdrivers/media/radio/Makefile +1
-0@@ -24,5 +24,6 @@ obj-$(CONFIG_RADIO_SI470X) += si470x/ obj-$(CONFIG_USB_MR800) += radio-mr800.o obj-$(CONFIG_RADIO_TEA5764) += radio-tea5764.o obj-$(CONFIG_RADIO_TEF6862) += tef6862.o +obj-$(CONFIG_RADIO_TIMBERDALE) += radio-timb.o EXTRA_CFLAGS += -Isound
Signature · 1 line
Hans Verkuil - video4linux developer - sponsored by TANDBERG
Quoted 8 lines · Hans Verkuil
drivers/media/radio/Kconfig config RADIO_TEF6862 · line 434
Quoted 5 lines · On Wednesday 27 January 2010 17:22:10 Richard Röjfors wrote:
This patch adds radio-timb to the
MakefileandKconfig.drivers/media/radio/Kconfig +3
-0+config RADIO_TIMBERDALE + tristate "Enable the Timberdale radio driver" + depends on MFD_TIMBERDALE && VIDEO_V4L2 && HAS_IOMEMI think you need a dependency on I2C as well.
It is not needed. VIDEO_V4L2 already takes care of properly handling it.
Signature · 2 lines
Cheers, Mauro
Quoted 4 lines · On Wednesday 03 February 2010 10:58:14 Mauro Carvalho Chehab wrote:
Quoted 2 lines · Hans Verkuil
Quoted 1 line · On Wednesday 27 January 2010 17:22:10 Richard Röjfors wrote:
This patch adds radio-timb to the
MakefileandKconfig.
Quoted 8 lines
Quoted 5 lines
drivers/media/radio/Kconfig config RADIO_TEF6862 · line 434
Quoted 3 lines
drivers/media/radio/Kconfig +3
-0+config RADIO_TIMBERDALE + tristate "Enable the Timberdale radio driver" + depends on MFD_TIMBERDALE && VIDEO_V4L2 && HAS_IOMEMI think you need a dependency on I2C as well.
It is not needed.
VIDEO_V4L2already takes care of properly handling it.
Where does that happen? I don't see how VIDEO_V4L2 can know when a driver requires I2C. It's not a universal requirement, after all.
Regards,
Hans
Quoted 2 lines
Signature · 1 line
Hans Verkuil - video4linux developer - sponsored by TANDBERG
Quoted 1 line · Richard Röjfors
This patch adds radio-timb to the
MakefileandKconfig.
On your next submission, please fold with patch 1/2.
Quoted 38 lines
Signed-off-by Richard Röjfors <[email protected]>---
drivers/media/radio/Kconfig +10
-0@@ -429,4 +429,14 @@ config RADIO_TEF6862 To compile this driver as a module, choose M here: the module will be called TEF6862. +config RADIO_TIMBERDALE + tristate "Enable the Timberdale radio driver" + depends on MFD_TIMBERDALE && VIDEO_V4L2 && HAS_IOMEM + select RADIO_TEF6862 + select RADIO_SAA7706H + ---help--- + This is a kind of umbrella driver for the Radio Tuner and DSP + found behind the Timberdale FPGA on the Russellville board. + Enable this driver will automatically select the DSP and tuner. + endif # RADIO_ADAPTERSdrivers/media/radio/Makefile +1
-1@@ -24,5 +24,6 @@ obj-$(CONFIG_RADIO_SI470X) += si470x/ obj-$(CONFIG_USB_MR800) += radio-mr800.o obj-$(CONFIG_RADIO_TEA5764) += radio-tea5764.o obj-$(CONFIG_RADIO_TEF6862) += tef6862.o +obj-$(CONFIG_RADIO_TIMBERDALE) += radio-timb.o EXTRA_CFLAGS += -Isound --To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 2 lines
Cheers, Mauro