fec_mxc: add support for MX51 processor
PATCH v3 7/11 fec_mxc: add support for MX51 processor
The patch add support for the Freescale mx51 processor to the FEC ethernet driver.
--- drivers/net/fec_mxc.c | 68 +++++++++++++++++++++--------------------------- 1 files changed, 30 insertions(+), 38 deletions(-)
drivers/net/fec_mxc.c +30 -38
@@ -108,6 +108,17 @@ static int fec_miiphy_read(char *dev, uint8_t phyAddr, uint8_t regAddr,return 0 ; } +static void fec_mii_setspeed (struct fec_priv *fec) +{ +/* +* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock +* and do not drop the Preamble. +*/ +writel ((((imx_get_fecclk () /1000000 ) +2 ) /5 ) <<1 , + &fec->eth->mii_speed); +debug ("fec_init: mii_speed %#lx\n" , + fec->eth->mii_speed); +}static int fec_miiphy_write (char *dev,uint8_t phyAddr,uint8_t regAddr,uint16_t data) {
@@ -236,7 +247,7 @@ static int fec_rbd_init(struct fec_priv *fec, int count, int size) fec->rdb_ptr =malloc (size * count +DB_DATA_ALIGNMENT ); p = (uint32_t )fec->rdb_ptr;if (!p) { -puts ("fec_imx27: not enough malloc memory!\n" ); +puts ("fec_mxc: not enough malloc memory\n" );return -ENOMEM ; }memset ((void *)p,0 , size * count +DB_DATA_ALIGNMENT );
@@ -299,6 +310,13 @@ static void fec_rbd_clean(int last, struct fec_bd *pRbd)static int fec_get_hwaddr (struct eth_device *dev,unsigned char *mac) { +/* +* The MX27 can store the mac address in internal eeprom +* This mechanism is not supported now by MX51 +*/ +#ifdef CONFIG_MX51 +return -1 ; +#else struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE ;int i;
@@ -306,6 +324,7 @@ static int fec_get_hwaddr(struct eth_device *dev, unsigned char *mac) mac[6 -1 -i] =readl (&iim->iim_bank_area0[IIM0_MAC + i]);return is_valid_ether_addr (mac); +#endif }static int fec_set_hwaddr (struct eth_device *dev,unsigned char *mac)
@@ -373,7 +392,7 @@ static int fec_init(struct eth_device *dev, bd_t* bd) sizeof(struct fec_bd) + DB_ALIGNMENT); base = (uint32_t )fec->base_ptr;if (!base) { -puts ("fec_imx27: not enough malloc memory!\n" ); +puts ("fec_mxc: not enough malloc memory\n" );return -ENOMEM ; } memset((void *)base, 0, (2 + FEC_RBD_NUM) *
@@ -411,14 +430,8 @@ static int fec_init(struct eth_device *dev, bd_t* bd)* Frame length=1518; MII mode; */ writel (0x05ee0024 , &fec->eth->r_cntrl);/* FIXME 0x05ee0004 */ -/* -* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock -* and do not drop the Preamble. -*/ -writel ((((imx_get_ahbclk () /1000000 ) +2 ) /5 ) <<1 , - &fec->eth->mii_speed); -debug ("fec_init: mii_speed %#lx\n" , - (((imx_get_ahbclk () /1000000 ) +2 ) /5 ) <<1 ); + +fec_mii_setspeed (fec); }/* * Set Opcode/Pause Duration Register
@@ -522,7 +535,7 @@ static int fec_send(struct eth_device *dev, volatile void* packet, int length)* Check for valid length of data. */ if ((length >1500 ) || (length <=0 )) { -printf ("Payload (%d) to large!\n" , length); +printf ("Payload (%d) to large\n" , length);return -1 ; }
@@ -651,22 +664,14 @@ static int fec_recv(struct eth_device *dev)static int fec_probe (bd_t *bd) { -struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE ;struct eth_device *edev;struct fec_priv *fec = &gfec; -unsigned char ethaddr_str[20 ];unsigned char ethaddr[6 ]; -char *tmp =getenv ("ethaddr" ); -char *end; - -/* enable FEC clock */ -writel (readl (&pll->pccr1) |PCCR1_HCLK_FEC , &pll->pccr1); -writel (readl (&pll->pccr0) |PCCR0_FEC_EN , &pll->pccr0);/* create and fill edev struct */ edev = (struct eth_device *)malloc (sizeof (struct eth_device ));if (!edev) { -puts ("fec_imx27: not enough malloc memory!\n" ); +puts ("fec_mxc: not enough malloc memory\n" );return -ENOMEM ; } edev->priv = fec;
@@ -702,14 +707,7 @@ static int fec_probe(bd_t *bd)* Frame length=1518; MII mode; */ writel (0x05ee0024 , &fec->eth->r_cntrl);/* FIXME 0x05ee0004 */ -/* -* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock -* and do not drop the Preamble. -*/ -writel ((((imx_get_ahbclk () /1000000 ) +2 ) /5 ) <<1 , - &fec->eth->mii_speed); -debug ("fec_init: mii_speed %#lx\n" , - (((imx_get_ahbclk () /1000000 ) +2 ) /5 ) <<1 ); +fec_mii_setspeed (fec);sprintf (edev->name,"FEC_MXC" );
@@ -717,17 +715,11 @@ static int fec_probe(bd_t *bd)eth_register (edev); -if ((NULL != tmp) && (12 <=strlen (tmp))) { -int i; -/* convert MAC from string to int */ -for (i =0 ; i <6 ; i++) { - ethaddr[i] = tmp ?simple_strtoul (tmp, &end,16 ) :0 ; -if (tmp) - tmp = (*end) ? end +1 : end; +if (!eth_getenv_enetaddr ("ethaddr" , ethaddr)) { +if (fec_get_hwaddr (edev, ethaddr) ==0 ) { +printf ("got MAC address from EEPROM: %pM\n" , ethaddr); +setenv ("ethaddr" , (char *)ethaddr); } - }else if (fec_get_hwaddr (edev, ethaddr) ==0 ) { -printf ("got MAC address from EEPROM: %pM\n" , ethaddr); -setenv ("ethaddr" , (char *)ethaddr_str); }memcpy (edev->enetaddr, ethaddr,6 );fec_set_hwaddr (edev, ethaddr);
Signature · 1 line
1.6.3.3
PATCH v3 7/11 fec_mxc: add support for MX51 processor
Hi Stefano,
Sorry for taking so long to provide feedback here. My requests should be pretty quick :)
Quoted 88 lines · Stefano Babic
The patch add support for the Freescale mx51 processor to the FEC ethernet driver.
Signed-off-by Stefano Babic <[email protected]>--- drivers/net/fec_mxc.c | 68 +++++++++++++++++++++--------------------------- 1 files changed, 30 insertions(+), 38 deletions(-)drivers/net/fec_mxc.c +23
-10@@ -108,6 +108,17 @@ static int fec_miiphy_read(char *dev, uint8_t phyAddr, uint8_t regAddr,return 0 ; } +static void fec_mii_setspeed (struct fec_priv *fec) +{ +/* +* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock +* and do not drop the Preamble. +*/ +writel ((((imx_get_fecclk () /1000000 ) +2 ) /5 ) <<1 , + &fec->eth->mii_speed); +debug ("fec_init: mii_speed %#lx\n" , + fec->eth->mii_speed); +}static int fec_miiphy_write (char *dev,uint8_t phyAddr,uint8_t regAddr,uint16_t data) {@@ -236,7 +247,7 @@ static int fec_rbd_init(struct fec_priv *fec, int count, int size) fec->rdb_ptr =malloc (size * count +DB_DATA_ALIGNMENT ); p = (uint32_t )fec->rdb_ptr;if (!p) { -puts ("fec_imx27: not enough malloc memory!\n" ); +puts ("fec_mxc: not enough malloc memory\n" );return -ENOMEM ; }memset ((void *)p,0 , size * count +DB_DATA_ALIGNMENT );@@ -299,6 +310,13 @@ static void fec_rbd_clean(int last, struct fec_bd *pRbd)static int fec_get_hwaddr (struct eth_device *dev,unsigned char *mac) { +/* +* The MX27 can store the mac address in internal eeprom +* This mechanism is not supported now by MX51 +*/ +#ifdef CONFIG_MX51 +return -1 ; +#else struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE ;int i;@@ -306,6 +324,7 @@ static int fec_get_hwaddr(struct eth_device *dev, unsigned char *mac) mac[6 -1 -i] =readl (&iim->iim_bank_area0[IIM0_MAC + i]);return is_valid_ether_addr (mac); +#endif }static int fec_set_hwaddr (struct eth_device *dev,unsigned char *mac)@@ -373,7 +392,7 @@ static int fec_init(struct eth_device *dev, bd_t* bd) sizeof(struct fec_bd) + DB_ALIGNMENT); base = (uint32_t )fec->base_ptr;if (!base) { -puts ("fec_imx27: not enough malloc memory!\n" ); +puts ("fec_mxc: not enough malloc memory\n" );return -ENOMEM ; } memset((void *)base, 0, (2 + FEC_RBD_NUM) *@@ -411,14 +430,8 @@ static int fec_init(struct eth_device *dev, bd_t* bd)* Frame length=1518; MII mode; */ writel (0x05ee0024 , &fec->eth->r_cntrl);/* FIXME 0x05ee0004 */ -/* -* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock -* and do not drop the Preamble. -*/ -writel ((((imx_get_ahbclk () /1000000 ) +2 ) /5 ) <<1 , - &fec->eth->mii_speed); -debug ("fec_init: mii_speed %#lx\n" , - (((imx_get_ahbclk () /1000000 ) +2 ) /5 ) <<1 ); + +fec_mii_setspeed (fec); }/* * Set Opcode/Pause Duration Register
drivers/net/fec_mxc.c static int fec_send(struct eth_device *dev, volatile void* packet, int length) · line 539
Quoted 6 lines
drivers/net/fec_mxc.c +1
-1@@ -522,7 +535,7 @@ static int fec_send(struct eth_device *dev, volatile void* packet, int length)* Check for valid length of data. */ if ((length >1500 ) || (length <=0 )) { -printf ("Payload (%d) to large!\n" , length); +printf ("Payload (%d) to large\n" , length);
s/to/too/
Quoted 56 lines
drivers/net/fec_mxc.c +3
-24return -1 ; }@@ -651,22 +664,14 @@ static int fec_recv(struct eth_device *dev)static int fec_probe (bd_t *bd) { -struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE ;struct eth_device *edev;struct fec_priv *fec = &gfec; -unsigned char ethaddr_str[20 ];unsigned char ethaddr[6 ]; -char *tmp =getenv ("ethaddr" ); -char *end; - -/* enable FEC clock */ -writel (readl (&pll->pccr1) |PCCR1_HCLK_FEC , &pll->pccr1); -writel (readl (&pll->pccr0) |PCCR0_FEC_EN , &pll->pccr0);/* create and fill edev struct */ edev = (struct eth_device *)malloc (sizeof (struct eth_device ));if (!edev) { -puts ("fec_imx27: not enough malloc memory!\n" ); +puts ("fec_mxc: not enough malloc memory\n" );return -ENOMEM ; } edev->priv = fec;@@ -702,14 +707,7 @@ static int fec_probe(bd_t *bd)* Frame length=1518; MII mode; */ writel (0x05ee0024 , &fec->eth->r_cntrl);/* FIXME 0x05ee0004 */ -/* -* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock -* and do not drop the Preamble. -*/ -writel ((((imx_get_ahbclk () /1000000 ) +2 ) /5 ) <<1 , - &fec->eth->mii_speed); -debug ("fec_init: mii_speed %#lx\n" , - (((imx_get_ahbclk () /1000000 ) +2 ) /5 ) <<1 ); +fec_mii_setspeed (fec);sprintf (edev->name,"FEC_MXC" );@@ -717,17 +715,11 @@ static int fec_probe(bd_t *bd)eth_register (edev); -if ((NULL != tmp) && (12 <=strlen (tmp))) { -int i; -/* convert MAC from string to int */ -for (i =0 ; i <6 ; i++) { - ethaddr[i] = tmp ?simple_strtoul (tmp, &end,16 ) :0 ; -if (tmp) - tmp = (*end) ? end +1 : end; +if (!eth_getenv_enetaddr ("ethaddr" , ethaddr)) {
drivers/net/fec_mxc.c static int fec_probe(bd_t *bd) · line 725
Quoted 10 lines
drivers/net/fec_mxc.c +3
-3+if (fec_get_hwaddr (edev, ethaddr) ==0 ) { +printf ("got MAC address from EEPROM: %pM\n" , ethaddr); +setenv ("ethaddr" , (char *)ethaddr); } - }else if (fec_get_hwaddr (edev, ethaddr) ==0 ) { -printf ("got MAC address from EEPROM: %pM\n" , ethaddr); -setenv ("ethaddr" , (char *)ethaddr_str); }memcpy (edev->enetaddr, ethaddr,6 );fec_set_hwaddr (edev, ethaddr);
Your driver shouldn't touch the environment (i.e. no getenv/setenv calls). Just save the value from ROM into edev->enetaddr, like this:
if (fec_get_hwaddr(edev, ethaddr) == 0)
memcpy(edev->enetaddr, ethaddr, 6);
The core net code will take care of overwriting this if there's a value in the environment. Please see README.enetaddr if this isn't clear.
regards,
Ben
PATCH v3 7/11 fec_mxc: add support for MX51 processor
Quoted 1 line · Ben Warren
Hi Stefano,
Hi Ben,
Quoted 7 lines
Your driver shouldn't touch the environment (i.e. no getenv/setenv calls). Just save the value from ROM into
edev->enetaddr, like this:
if (fec_get_hwaddr(edev, ethaddr)== 0)
memcpy(edev->enetaddr, ethaddr, 6);The core net code will take care of overwriting this if there's a value in the environment. Please see README.enetaddr if this isn't clear.
I see. This means there is another problem in this driver. The mac address is set only once in the probe(), but as you describes, it must be done in the init() entry point, else it cannot be overwritten by the value of ethaddr. I will move the setting of the mac address in my next submit, too.
Best regards,
Stefano
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================
PATCH v4 7/11 fec_mxc: add support for MX51 processor
In reply to Stefano BabicThe patch add support for the Freescale mx51 processor to the FEC ethernet driver.
--- drivers/net/fec_mxc.c | 73 +++++++++++++++++++++--------------------------- 1 files changed, 32 insertions(+), 41 deletions(-)
drivers/net/fec_mxc.c +32 -41
@@ -108,6 +108,17 @@ static int fec_miiphy_read(char *dev, uint8_t phyAddr, uint8_t regAddr,return 0 ; } +static void fec_mii_setspeed (struct fec_priv *fec) +{ +/* +* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock +* and do not drop the Preamble. +*/ +writel ((((imx_get_fecclk () /1000000 ) +2 ) /5 ) <<1 , + &fec->eth->mii_speed); +debug ("fec_init: mii_speed %#lx\n" , + fec->eth->mii_speed); +}static int fec_miiphy_write (char *dev,uint8_t phyAddr,uint8_t regAddr,uint16_t data) {
@@ -236,7 +247,7 @@ static int fec_rbd_init(struct fec_priv *fec, int count, int size) fec->rdb_ptr =malloc (size * count +DB_DATA_ALIGNMENT ); p = (uint32_t )fec->rdb_ptr;if (!p) { -puts ("fec_imx27: not enough malloc memory!\n" ); +puts ("fec_mxc: not enough malloc memory\n" );return -ENOMEM ; }memset ((void *)p,0 , size * count +DB_DATA_ALIGNMENT );
@@ -299,6 +310,13 @@ static void fec_rbd_clean(int last, struct fec_bd *pRbd)static int fec_get_hwaddr (struct eth_device *dev,unsigned char *mac) { +/* +* The MX27 can store the mac address in internal eeprom +* This mechanism is not supported now by MX51 +*/ +#ifdef CONFIG_MX51 +return -1 ; +#else struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE ;int i;
@@ -306,10 +324,12 @@ static int fec_get_hwaddr(struct eth_device *dev, unsigned char *mac) mac[6 -1 -i] =readl (&iim->iim_bank_area0[IIM0_MAC + i]);return is_valid_ether_addr (mac); +#endif } -static int fec_set_hwaddr (struct eth_device *dev,unsigned char *mac) +static int fec_set_hwaddr (struct eth_device *dev) { +uchar *mac = dev->enetaddr;struct fec_priv *fec = (struct fec_priv *)dev->priv;writel (0 , &fec->eth->iaddr1);
@@ -373,7 +393,7 @@ static int fec_init(struct eth_device *dev, bd_t* bd) sizeof(struct fec_bd) + DB_ALIGNMENT); base = (uint32_t )fec->base_ptr;if (!base) { -puts ("fec_imx27: not enough malloc memory!\n" ); +puts ("fec_mxc: not enough malloc memory\n" );return -ENOMEM ; } memset((void *)base, 0, (2 + FEC_RBD_NUM) *
@@ -411,14 +431,8 @@ static int fec_init(struct eth_device *dev, bd_t* bd)* Frame length=1518; MII mode; */ writel (0x05ee0024 , &fec->eth->r_cntrl);/* FIXME 0x05ee0004 */ -/* -* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock -* and do not drop the Preamble. -*/ -writel ((((imx_get_ahbclk () /1000000 ) +2 ) /5 ) <<1 , - &fec->eth->mii_speed); -debug ("fec_init: mii_speed %#lx\n" , - (((imx_get_ahbclk () /1000000 ) +2 ) /5 ) <<1 ); + +fec_mii_setspeed (fec); }/* * Set Opcode/Pause Duration Register
@@ -460,6 +474,7 @@ static int fec_init(struct eth_device *dev, bd_t* bd)miiphy_restart_aneg (dev);fec_open (dev); +fec_set_hwaddr (dev);return 0 ; }
@@ -522,7 +537,7 @@ static int fec_send(struct eth_device *dev, volatile void* packet, int length)* Check for valid length of data. */ if ((length >1500 ) || (length <=0 )) { -printf ("Payload (%d) to large!\n" , length); +printf ("Payload (%d) too large\n" , length);return -1 ; }
@@ -651,22 +666,14 @@ static int fec_recv(struct eth_device *dev)static int fec_probe (bd_t *bd) { -struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE ;struct eth_device *edev;struct fec_priv *fec = &gfec; -unsigned char ethaddr_str[20 ];unsigned char ethaddr[6 ]; -char *tmp =getenv ("ethaddr" ); -char *end; - -/* enable FEC clock */ -writel (readl (&pll->pccr1) |PCCR1_HCLK_FEC , &pll->pccr1); -writel (readl (&pll->pccr0) |PCCR0_FEC_EN , &pll->pccr0);/* create and fill edev struct */ edev = (struct eth_device *)malloc (sizeof (struct eth_device ));if (!edev) { -puts ("fec_imx27: not enough malloc memory!\n" ); +puts ("fec_mxc: not enough malloc memory\n" );return -ENOMEM ; } edev->priv = fec;
@@ -702,14 +709,7 @@ static int fec_probe(bd_t *bd)* Frame length=1518; MII mode; */ writel (0x05ee0024 , &fec->eth->r_cntrl);/* FIXME 0x05ee0004 */ -/* -* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock -* and do not drop the Preamble. -*/ -writel ((((imx_get_ahbclk () /1000000 ) +2 ) /5 ) <<1 , - &fec->eth->mii_speed); -debug ("fec_init: mii_speed %#lx\n" , - (((imx_get_ahbclk () /1000000 ) +2 ) /5 ) <<1 ); +fec_mii_setspeed (fec);sprintf (edev->name,"FEC_MXC" );
@@ -717,20 +717,11 @@ static int fec_probe(bd_t *bd)eth_register (edev); -if ((NULL != tmp) && (12 <=strlen (tmp))) { -int i; -/* convert MAC from string to int */ -for (i =0 ; i <6 ; i++) { - ethaddr[i] = tmp ?simple_strtoul (tmp, &end,16 ) :0 ; -if (tmp) - tmp = (*end) ? end +1 : end; - } - }else if (fec_get_hwaddr (edev, ethaddr) ==0 ) { +if (fec_get_hwaddr (edev, ethaddr) ==0 ) {printf ("got MAC address from EEPROM: %pM\n" , ethaddr); -setenv ("ethaddr" , (char *)ethaddr_str); +memcpy (edev->enetaddr, ethaddr,6 ); +fec_set_hwaddr (edev); } -memcpy (edev->enetaddr, ethaddr,6 ); -fec_set_hwaddr (edev, ethaddr);return 0 ; }
Signature · 1 line
1.6.3.3
Ben Warren
AppliedPATCH v4 7/11 fec_mxc: add support for MX51 processor
Stefano,
Quoted 8 lines · Stefano Babic
The patch add support for the Freescale mx51 processor to the FEC ethernet driver.
Signed-off-by Stefano Babic<[email protected]>--- drivers/net/fec_mxc.c | 73 +++++++++++++++++++++--------------------------- 1 files changed, 32 insertions(+), 41 deletions(-)
Applied to net repo.
thanks,
Ben