ath9k: add a workaround for ack timeout issues
PATCH 1/1 ath9k: add a workaround for ack timeout issues
Adding support for setting the coverage class in some cases broke association and data transfer, as it overwrote the initial ACK timeout value from the initvals with a smaller value.
I don't know why the new value works in 5 GHz (matches the initval there), but not in 2.4 GHz (initvals use 64us here), so until the problem is fully understood, the value should be increased again.
Signed-off-by Felix Fietkau <[email protected]>
---
drivers/net/wireless/ath/ath9k/hw.c +11 -0
@@ -1233,6 +1233,17 @@ void ath9k_hw_init_global_settings(struc/* As defined by IEEE 802.11-2007 17.3.8.6 */ slottime = ah->slottime +3 * ah->coverage_class; acktimeout = slottime + sifstime; + +/* +* Workaround for early ACK timeouts, add an offset to match the +* initval's 64us ack timeout value. +* This was initially only meant to work around an issue with delayed +* BA frames in some implementations, but it has been found to fix ACK +* timeout issues in other cases as well. +*/ +if (conf->channel && conf->channel->band ==IEEE80211_BAND_2GHZ ) + acktimeout +=64 - sifstime - ah->slottime; +ath9k_hw_setslottime (ah, slottime);ath9k_hw_set_ack_timeout (ah, acktimeout);ath9k_hw_set_cts_timeout (ah, acktimeout);