Add support for SMT7020 to cx88
PATCH 1/1 Add support for SMT7020 to cx88
From: Helmut Auer <[email protected]>
This patch (originally written by Dirk Herrendoerfer) adds support for the built-in dvb device of a Samsung SMT7020s (x86 based STB) to the cx88 family.
(see http://www.linuxtv.org/pipermail/linux-dvb/2007-January/015208.html)
Signature · 1 line
Helmut Auer, [email protected]
linux/drivers/media/video/cx88/cx88-cards.c +23 -0
@@ -1499,6 +1499,18 @@ .audioroute = 8, }, }, + [CX88_BOARD_SAMSUNG_SMT_7020 ] = { + .name ="Samsung SMT 7020 DVB-S" , + .tuner_type =TUNER_ABSENT , + .radio_type =UNSET , + .tuner_addr =ADDR_UNSET , + .radio_addr =ADDR_UNSET , + .input = { { + .type =CX88_VMUX_DVB , + .vmux =0 , + } }, + .mpeg =CX88_MPEG_DVB , + }, [CX88_BOARD_ADSTECH_PTV_390 ] = { .name ="ADS Tech Instant Video PCI" , .tuner_type =TUNER_ABSENT ,
@@ -2388,6 +2400,14 @@ .subvendor = 0x0070, .subdevice = 0x1404, .card = CX88_BOARD_HAUPPAUGE_HVR3000, + }, { + .subvendor = 0x18ac, + .subdevice = 0xdc00, + .card = CX88_BOARD_SAMSUNG_SMT_7020, + }, { + .subvendor = 0x18ac, + .subdevice = 0xdccd, + .card = CX88_BOARD_SAMSUNG_SMT_7020, },{ .subvendor = 0x1461, .subdevice = 0xc111, /* AverMedia M150-D */
@@ -2666,6 +2686,9 @@case 98559 :/* WinTV-HVR1100LP (Video no IR, Retail - Low Profile) */ /* known */ break ; +case CX88_BOARD_SAMSUNG_SMT_7020 : +cx_set (MO_GP0_IO ,0x008989FF ); +break ;default :warn_printk (core,"warning: unknown hauppauge model #%d\n" , tv.model);
linux/drivers/media/video/cx88/cx88-dvb.c +216 -0
228 lines not on this page · raw message
linux/drivers/media/video/cx88/cx88-mpeg.c +3 -0
@@ -123,6 +123,9 @@case CX88_BOARD_PCHDTV_HD5500 :cx_write (TS_SOP_STAT ,1 <<13 );break ; +case CX88_BOARD_SAMSUNG_SMT_7020 : +cx_write (TS_SOP_STAT ,0x00 ); +break ;case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1 :case CX88_BOARD_HAUPPAUGE_NOVASE2_S1 :cx_write (MO_PINMUX_IO ,0x88 );/* Enable MPEG parallel IO and video signal pins */
linux/drivers/media/video/cx88/cx88.h +1 -0
@@ -240,6 +240,7 @@#define CX88_BOARD_WINFAST_DTV1800H 81#define CX88_BOARD_WINFAST_DTV2000H_J 82#define CX88_BOARD_PROF_7301 83 +#define CX88_BOARD_SAMSUNG_SMT_7020 84enum cx88_itype {CX88_VMUX_COMPOSITE1 =1 ,
Am 11.02.2010 22:06, schrieb Helmut Auer:
Quoted 8 lines
From: Helmut Auer <[email protected]>
This patch (originally written by Dirk Herrendoerfer) adds support for the built-in dvb device of a Samsung SMT7020s (x86 based STB) to the cx88 family.
(see http://www.linuxtv.org/pipermail/linux-dvb/2007-January/015208.html)Signed-off-by Helmut Auer <[email protected]>
What do I have to do to get some attention ?
Signature · 1 line
Helmut Auer, [email protected]
Am 11.02.2010 22:06, schrieb Helmut Auer:
Quoted 8 lines
From: Helmut Auer <[email protected]>
This patch (originally written by Dirk Herrendoerfer) adds support for the built-in dvb device of a Samsung SMT7020s (x86 based STB) to the cx88 family.
(see http://www.linuxtv.org/pipermail/linux-dvb/2007-January/015208.html)Signed-off-by Helmut Auer <[email protected]>
What's to do to get attention for this ?
Signature · 1 line
Helmut Auer, [email protected]
Quoted 11 lines · Helmut Auer
Am 11.02.2010 22:06, schrieb Helmut Auer:
Quoted 8 lines
From: Helmut Auer <[email protected]>
This patch (originally written by Dirk Herrendoerfer) adds support for the built-in dvb device of a Samsung SMT7020s (x86 based STB) to the cx88 family.
(see http://www.linuxtv.org/pipermail/linux-dvb/2007-January/015208.html)Signed-off-by Helmut Auer <[email protected]>What's to do to get attention for this ?
Your patch will likely be catched by patchwork, so, it is on the queue. I should be handle the pending patches after the holidays. Yet, as it adds a new driver, we need the Signed-off-by from the driver author (Dirk).
Signature · 2 lines
Cheers, Mauro