Skip to contentSkip to conversation

Set f_max to 24 MHz for MMC

PATCH New Linus Walleij 2 participants 4 messages Feb 15, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 3/3 Set f_max to 24 MHz for MMC

This employs the frequency setting mechanism introduced to the MMCI to specify that this system can actually be clocked at 24 MHz.

---
 arch/arm/mach-u300/mmc.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
arch/arm/mach-u300/mmc.c +1 -0
index 8bf466b..5681563 100644
@@ -104,6 +104,7 @@ int __devinit mmc_init(struct amba_device *adev)
 	 * we have a regulator we can control instead.
 	 */
 	/* Nominally 2.85V on our platform */
+	mmci_card->mmc0_plat_data.f_max = 24*1024*1024;
 	mmci_card->mmc0_plat_data.status = mmc_status;
 	mmci_card->mmc0_plat_data.gpio_wp = -1;
 	mmci_card->mmc0_plat_data.gpio_cd = -1;
Signature · 1 line
1.6.3.3
#1 lore raw

PATCH 3/3 Set f_max to 24 MHz for MMC

arch/arm/mach-u300/mmc.c int __devinit mmc_init(struct amba_device *adev) · line 107

Quoted 2 lines · Linus Walleij
arch/arm/mach-u300/mmc.c +1 -0
+	mmci_card->mmc0_plat_data.f_max = 24*1024*1024;

Is the frequency really 25165824 Hz and not 24000000 Hz?

David

Signature · 6 lines
David Vrabel, Senior Software Engineer, Drivers
CSR, Churchill House, Cambridge Business Park,  Tel: +44 (0)1223 692562
Cowley Road, Cambridge, CB4 0WZ                 http://www.csr.com/


Member of the CSR plc group of companies. CSR plc registered in England and Wales, registered number 4187346, registered office Churchill House, Cambridge Business Park, Cowley Road, Cambridge, CB4 0WZ, United Kingdom
#2 lore raw

PATCH 3/3 Set f_max to 24 MHz for MMC

[David Vrabel]

Quoted 5 lines

arch/arm/mach-u300/mmc.c int __devinit mmc_init(struct amba_device *adev) · line 107

Quoted 2 lines · Linus Walleij
arch/arm/mach-u300/mmc.c +1 -0
+	mmci_card->mmc0_plat_data.f_max = 24*1024*1024;

Is the frequency really 25165824 Hz and not 24000000 Hz?

It's actually 18900000 Hz. This f_max is a physical limitation and a property of the SoC, so that figure comes from some semiconductor person.

When combined with the U300 clock framework, the min() function will resolve to min(18900000, 24000000) i.e. 18900000 Hz.

Linus Walleij

#3 lore raw

PATCH 3/3 Set f_max to 24 MHz for MMC

In reply to David Vrabel

[David Vrabel]

Quoted 5 lines

arch/arm/mach-u300/mmc.c int __devinit mmc_init(struct amba_device *adev) · line 107

Quoted 2 lines · Linus Walleij
arch/arm/mach-u300/mmc.c +1 -0
+	mmci_card->mmc0_plat_data.f_max = 24*1024*1024;

Is the frequency really 25165824 Hz and not 24000000 Hz?

Or, yes it is 24000000, as was your question, hm, the 1024 was probably out of habit, I'll change to 24*1000*1000.

Sorry for getting it all backwards, I need vacation.

Linus Walleij