V4L/DVB: em28xx : Terratec Cinergy Hybrid T USB XS FR is working
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 40 lines · Patch from Catimimi
From: Catimimi<[email protected]>
I succeeded in running Cinergy Hybrid T USB XS FR in both modes.
Signed-off-by Mauro Carvalho Chehab<[email protected]>drivers/media/video/em28xx/em28xx-cards.c | 3 ++- drivers/media/video/em28xx/em28xx-dvb.c | 1 + 2 files changed, 3 insertions(+), 1 deletions(-)---
http://git.linuxtv.org/v4l-dvb.git?a=commitdiff;h=a6e03bf56cb824507fff424eac193eca7a2fe17f
drivers/media/video/em28xx/em28xx-cards.c +2
-1@@ -745,11 +745,12 @@ struct em28xx_board em28xx_boards[] = { [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = { .name = "Terratec Hybrid XS Secam", - .valid = EM28XX_BOARD_NOT_VALIDATED, .has_msp34xx = 1, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, + .has_dvb = 1, + .dvb_gpio = default_digital, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0,drivers/media/video/em28xx/em28xx-dvb.c +0
-0
drivers/media/video/em28xx/em28xx-dvb.c static int dvb_init(struct em28xx *dev) · line 508
Quoted 7 lines
drivers/media/video/em28xx/em28xx-dvb.c +1
-0@@ -502,6 +502,7 @@ static int dvb_init(struct em28xx *dev) }break ;case EM2880_BOARD_TERRATEC_HYBRID_XS : +case EM2880_BOARD_TERRATEC_HYBRID_XS_FR :case EM2881_BOARD_PINNACLE_HYBRID_PRO :case EM2882_BOARD_DIKOM_DK300 : dvb->frontend = dvb_attach(zl10353_attach,
Hi,
This patch works well on a 32bits kernel but not on a 64 bits one. (openSUSE 11.2) I'm working on that problem.
Sorry.
Michel alias Catimimi.
Catimimi wrote:
i,
Quoted 4 lines
This patch works well on a 32bits kernel but not on a 64 bits one. (openSUSE 11.2)
I'm working on that problem.
64bits kernel with 64 bit usespace or are you using a 32bits application with a 64 bits kernel?
Cheers,
Mauro