Skip to contentSkip to conversation

Support for Buffalo WXL (Terastation Duo)

PATCH New Sebastien Requiem 2 participants 2 messages Feb 23, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Support for Buffalo WXL (Terastation Duo)

Hi everyone,

I have created a patch to support a new Sub architecture.

Description of patch:

* Modification of Kconfig to add the Option
* 1 new file : buffalo-wxl-setup.c
This file is inspired from the db-78xx0-setup.c already present. The following is done:
- Configure MPP Lines for the plateform (see my patch for MPP)
This is taken from the stock kernel provided by buffalotech (the vendor)
- GigaBit Ethernet
- Sata
- Uart are initiallized in a different way than on the dev board as we
have one core only.
- USB

The kernel has been running for some days now on my plateform.

I would appreciate if you had time to review my patch and give me any comments/feedback
regarding my work.

==== PATCH ====

  arch/arm/mach-mv78xx0/Kconfig             |    9 ++
  arch/arm/mach-mv78xx0/buffalo-wxl-setup.c |  189 
+++++++++++++++++++++++++++++
  2 files changed, 198 insertions(+), 0 deletions(-)

create mode 100644 arch/arm/mach-mv78xx0/buffalo-wxl-setup.c

arch/arm/mach-mv78xx0/Kconfig +9 -0
index 6fbe68f..4129d29 100644
@@ -14,6 +14,15 @@ config MACH_RD78X00_MASA
        Say 'Y' here if you want your kernel to support the
        Marvell RD-78x00-mASA Reference Design.
 
+
+config MACH_BUFFALO_WXL
+    bool "Buffalo WLX plateform"
+    help
+      Say 'Y' here if you want your kernel to support the
+      Buffalo WXL Nas.
+
+
+
  endmenu
 
  endif
(quoted diff) +0 -0

b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
new file mode 100644
index 0000000..9d00e28

arch/arm/mach-mv78xx0/buffalo-wxl-setup.c new file +189 -0

189 lines not on this page · raw message

Signature · 8 lines
1.5.6.5

Signed-off-by: Sebastien Requiem <[email protected]>

-- 
sebastien requiem
kolios.dk
tel: +45.50.14.00.02
#1 lore raw

PATCH 1/1 Support for Buffalo WXL (Terastation Duo)

Quoted 22 lines · Sebastien Requiem

Hi everyone,

I have created a patch to support a new Sub architecture.

Description of patch:

* Modification of Kconfig to add the Option
* 1 new file : buffalo-wxl-setup.c
This file is inspired from the db-78xx0-setup.c already present. The following is done:
- Configure MPP Lines for the plateform (see my patch for MPP)
This is taken from the stock kernel provided by buffalotech (the vendor)
- GigaBit Ethernet
- Sata
- Uart are initiallized in a different way than on the dev board as we have
one core only.
- USB

Quoted 4 lines

The kernel has been running for some days now on my plateform.

I would appreciate if you had time to review my patch and give me any comments/feedback regarding my work.

All previous comments also apply to this patch.

Furthermore you used the config symbol MACH_BUFFALO_WXL while the machine record expects MACH_TERASTATION_WXL. And in wxl_pci_init() you used machine_is_db78x00_bp() instead of machine_is_terastation_wxl() which is actively wrong.

I've fixed up those and pushed the result too.

Nicolas