No any working frequency/transponder with conceptronic ctvdigrcu
Hi all,
I'm new to DVB-T as I just bought a Conceptronic CTVDIGRCU v3.0 (usb dvb-t device), so I hope I do not ask a stupid question, but I do not get any results when executing:
./w_scan -ft -c NL
It returns (after a long list of frequency/time logging):
ERROR: Sorry - i couldn't get any working frequency/transponder Nothing to scan!!
I first tried the stock dvb-v4l in Ubuntu Karmic 2.6.31-19-generic and the w_scan from the repostory and after that the
one from
hg clone http://linuxtv.org/hg/v4l-dvb/
and w_scan from:
wget "http://wirbel.htpc-forum.de/w_scan/w_scan-20091230.tar.bz2
... but with the same result. My Windows 7 with media center does work with the antenna in exactly the same position.
I do get some errors in dmesg but I'm not sure if they harmful:
Feb 27 16:34:51 spock kernel: [ 111.934075] tda18271: performing RF tracking filter calibration Feb 27 16:34:53 spock kernel: [ 113.733475] af9013: I2C read failed reg:d417 Feb 27 16:34:53 spock kernel: [ 113.733496] tda18271: RF tracking filter calibration failed! Feb 27 16:36:37 spock kernel: [ 217.485162] tda18271: performing RF tracking filter calibration Feb 27 16:36:40 spock kernel: [ 220.636388] tda18271: RF tracking filter calibration complete Feb 27 16:43:05 spock kernel: [ 605.802390] af9013: I2C read failed reg:d417 Feb 27 16:43:05 spock kernel: [ 605.802639] af9013: I2C write failed reg:d3c0 len:1
Can somebody help me or point me to the right direction?
Roalt
|