ARM: s3c2440: mini2440: remove improper __initdata in struct s3c2410fb_display
Subsystems (2)
PATCH 1/1 ARM: s3c2440: mini2440: remove improper __initdata in struct s3c2410fb_display
This patch remove improper __initdata in struct s3c2410fb_display for for mini2440 board.
This __initdata prevents for example directfb to work properly (see below).
Error from directFB before this patch:
~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.3 |~~~~~~~~~~~~~~~~~~~~~~~~~~
(c) 2001-2009 The world wide DirectFB Open Source Community
(c) 2000-2004 Convergence (integrated media) GmbH
----------------------------------------------------------------(*) DirectFB/Core: Single Application Core. (2010-02-28 15:16)
(*) Direct/Memcpy: Using armasm_memcpy()
(*) Direct/Thread: Started 'VT Switcher' (-1) [CRITICAL OTHER/OTHER 0/0] <8388608>... (*) Direct/Thread: Started 'VT Flusher' (-1) [DEFAULT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/FBDev: Found 's3c2410fb' (ID 0) with frame buffer at 0x33900000, 150k (MMIO 0x00000000, 0k) (*) DirectFB/Graphics: Generic Software Rasterizer 0.6 (directfb.org)
(!) DirectFB/FBDev: No supported modes found in /etc/fb.modes and current mode not supported! (!) DirectFB/FBDev: Current mode's pixelformat: rgba 5/11, 6/5, 5/0, 0/0 (16bit)
(!) DirectFB/Core/layers: Failed to initialize layer 0!
--> Initialization error!
(!) DirectFB/Core: Could not initialize 'layer_core' core!
--> Initialization error!(#) DirectFBError [DirectFBCreate() failed]: Initialization error!
Good behaviour after this patch :
~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.3 |~~~~~~~~~~~~~~~~~~~~~~~~~~
(c) 2001-2009 The world wide DirectFB Open Source Community
(c) 2000-2004 Convergence (integrated media) GmbH
----------------------------------------------------------------(*) DirectFB/Core: Single Application Core. (2010-02-28 15:16)
(*) Direct/Memcpy: Using armasm_memcpy()
(*) Direct/Thread: Started 'VT Switcher' (-1) [CRITICAL OTHER/OTHER 0/0] <8388608>... (*) Direct/Thread: Started 'VT Flusher' (-1) [DEFAULT OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/FBDev: Found 's3c2410fb' (ID 0) with frame buffer at 0x33900000, 150k (MMIO 0x00000000, 0k) (*) DirectFB/Graphics: Generic Software Rasterizer 0.6 (directfb.org)
(*) DirectFB/Core/WM: Default 0.3 (directfb.org)
Screen (00) FBDev Primary Screen (primary screen)
Caps: VSYNC POWER_MANAGEMENT
Layer (00) FBDev Primary Layer (primary layer)
Type: GRAPHICS
Caps: SURFACE BRIGHTNESS CONTRAST SATURATION
--- arch/arm/mach-s3c2440/mach-mini2440.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/mach-s3c2440/mach-mini2440.c +1 -1
@@ -144,7 +144,7 @@ static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = { .type = (S3C2410_LCDCON1_TFT16BPP |\ S3C2410_LCDCON1_TFT) -static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { +static struct s3c2410fb_display mini2440_lcd_cfg[] = { [0 ] = {/* mini2440 + 3.5" TFT + touchscreen */ _LCD_DECLARE( 7, /* The 3.5 is quite fast */
Signature · 1 line
1.6.3.3
PATCH 1/1 ARM: s3c2440: mini2440: remove improper __initdata in struct s3c2410fb_display
Quoted 5 lines · Abdoulaye Walsimou Gaye
This patch remove improper
__initdatain structs3c2410fb_displayfor for mini2440 board.
This__initdataprevents for example directfb to work properly (see below).
I beleive this patch, and/or something similar is already in the pipe from some time.
Michel
PATCH 1/1 ARM: s3c2440: mini2440: remove improper __initdata in struct s3c2410fb_display
Quoted 10 lines · M P
Quoted 5 lines · Abdoulaye Walsimou Gaye
This patch remove improper
__initdatain structs3c2410fb_displayfor for mini2440 board.
This__initdataprevents for example directfb to work properly (see below).I beleive this patch, and/or something similar is already in the pipe from some time.
Please wait until Russell merges for-rmk/samsung5 into mainline and then send bug reports.
Signature · 3 lines
Ben Dooks, Design & Software Engineer, Simtec Electronics http://www.simtec.co.uk/