Skip to contentSkip to conversation

regression?

2.6.34-rc1 Etienne Basset 2 participants 2 messages Mar 9, 2010 – Mar 16, 2010 libata

lore
Share & tools
lore

Etienne Basset

author
#0 lore raw

hello,

with .34-rc1 i see some "stalls"; systems is frozen for say 30seconds, then comes backs to life The only clue i have is strange ATA logs that I didn't have before, see below.
My disk may be dying, it's 6 years old, but i shows the messages only in .34-rc1, never in .33 or .32

If the stalls are unrelated to ata, how could I debug that with perf? i got lots of 'WARNING: failed to keep up with mmap data' when using perf top.... '

thx
Etienne

lscpi
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)

cat /var/log/messages

Mar  9 21:13:08 etienne-desktop kernel: ata1: clearing spurious IRQ
Mar  9 21:13:38 etienne-desktop kernel: ata1: lost interrupt (Status 0x50)
Mar  9 21:13:38 etienne-desktop kernel: ata1: soft resetting link
Mar  9 21:13:39 etienne-desktop kernel: ata1.00: configured for UDMA/133
Mar  9 21:13:39 etienne-desktop kernel: ata1.00: device reported invalid CHS sector 0
Mar  9 21:13:39 etienne-desktop kernel: ata1: EH complete
Mar  9 21:19:01 etienne-desktop kernel: ata1: clearing spurious IRQ
Mar  9 21:19:31 etienne-desktop kernel: ata1: lost interrupt (Status 0x50)
Mar  9 21:19:31 etienne-desktop kernel: ata1: soft resetting link
Mar  9 21:19:32 etienne-desktop kernel: ata1.00: configured for UDMA/133
Mar  9 21:19:32 etienne-desktop kernel: ata1.00: device reported invalid CHS sector 0
Mar  9 21:19:32 etienne-desktop kernel: ata1: EH complete

dmesg
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20
ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20 ata1.00: ATA-6: ST3160023AS, 8.05, max UDMA/133 ata1.00: 312581808 sectors, multi 8: LBA48
ata1.00: configured for UDMA/133

#1 lore raw
Quoted 8 lines · On wtorek, 9 marca 2010 o 22:47:46 Etienne Basset wrote:

hello,

with .34-rc1 i see some "stalls"; systems is frozen for say 30seconds, then
comes backs to life The only clue i have is strange ATA logs that I didn't have before, see below. My disk may be dying, it's 6 years old, but i shows the messages only in .34-rc1, never in .33 or .32

I created a Bugzilla entry at http://bugzilla.kernel.org/show_bug.cgi?id=15549
for your bug report, please add your address to the CC list in there, thanks!

Signature · 2 lines
Maciej Rutecki
http://www.maciek.unixy.pl