Skip to contentSkip to conversation

usb superfloppy format and fat32

U-Boot Frank Benkert 2 participants 2 messages Mar 10, 2010

lore
Share & tools
lore
#0 lore raw

Hello,

I am investigating a problem for a customer of mine concerning FAT32 USB support in U-Boot 1.1.6. The customer told me it wouldn't work at all. The target is a MPC5200 cpu with an board similar to IceCube. After some reviews and tests it looks like not being a problem of FAT32 support alone because formatting an USB stick as an harddisk (either with linux or with Windows HP USB Disk Storage Format Tool) makes FAT32 work. It seems to be the combination of superfloppy format (without partition table) and FAT32. FAT16 by the way works with superfloppy format and with partition table.
FAT32 with superfloppy-format always shows the error "ERROR: CTL:TIMEOUT".

While searching the mailing lists I found many items with the string above in various scenarios; some fixes address USB initialization, FAT handling aso. but none of them seems to fix my problem.
So I decided to port back some of the code according to the current git
- without success.

Finally I performed my tests on a different platform running UBOOT 1.2.0 and version 1.3.0, but the superfloppy-stick also didn't work there.

Now, my questions:
- are these problems already known?
- does anyone found a solution to this already ?
- am I right with the assumption, that the combination superfloppy and
FAT32 doesn't work?

Thanks in advance

Frank

Signature · 3 lines
FRB Computersysteme GmbH, Geschaeftsfuehrer Frank Benkert
HRB 3981 SW, DE 216264352, Buero: Am Gartenweg 12, D-97618 Hohenroth
Tel: 09771-63095-40 Fax: 09771-63095-46
#1 lore raw

Dear Frank Benkert,

Quoted 3 lines · In message <[email protected]> you wrote:

I am investigating a problem for a customer of mine concerning FAT32 USB support in U-Boot 1.1.6. The customer told me it wouldn't work at all.

...

Quoted 2 lines

Finally I performed my tests on a different platform running UBOOT 1.2.0 and version 1.3.0, but the superfloppy-stick also didn't work there.

Why didn't you try any _recent_ version of the code?

U-Boot 1.3.0 is from Nov 2007 - you don't consider this to be a recent version, or do you?

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
People are always a lot more complicated than you  think.  It's  very
important to remember that.             - Terry Pratchett, _Truckers_