fsl_esdhc: add support for mx51 processor
PATCH v4 10/11 fsl_esdhc: add support for mx51 processor
The esdhc controller in the mx51 processor is quite the same as the one in some powerpc processors (MPC83xx, MPC85xx). This patches adapts the driver to support the arm mx51.
--- cpu/arm_cortexa8/mx51/Makefile | 2 +- cpu/arm_cortexa8/mx51/speed.c | 38 ++++++++++ drivers/mmc/fsl_esdhc.c | 153 +++++++++++++++++++++++++++------------- include/asm-arm/global_data.h | 3 + include/fsl_esdhc.h | 11 +++- lib_arm/board.c | 3 + 6 files changed, 159 insertions(+), 51 deletions(-) create mode 100644 cpu/arm_cortexa8/mx51/speed.c
cpu/arm_cortexa8/mx51/Makefile +1 -1
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).a -COBJS = soc.o clock.o iomux.o timer.o +COBJS = soc.o clock.o iomux.o timer.o speed.o SOBJS = lowlevel_init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
cpu/arm_cortexa8/mx51/speed.c new file +38 -0
@@ -0,0 +1,38 @@ +/* +* (C) Copyright 2000-2003 +* Wolfgang Denk, DENX Software Engineering, wd at denx.de. +* +* Copyright (C) 2004-2007 Freescale Semiconductor, Inc. +* TsiChung Liew (Tsi-Chung.Liew at freescale.com) +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#include <common.h> +#include <asm/arch/imx-regs.h> + +int get_clocks (void ) +{ +DECLARE_GLOBAL_DATA_PTR ; + +#ifdef CONFIG_FSL_ESDHC + gd->sdhc_clk =mxc_get_clock (MXC_IPG_PERCLK ); +#endif +return 0 ; +}
drivers/mmc/fsl_esdhc.c +104 -49
306 lines not on this page · raw message
include/asm-arm/global_data.h +3 -0
@@ -44,6 +44,9 @@ typedef struct global_data {#ifdef CONFIG_VFD unsigned char vfd_type;/* display type */ #endif +#ifdef CONFIG_FSL_ESDHC +unsigned long sdhc_clk; +#endif #if 0 unsigned long cpu_clk;/* CPU clock in Hz! */ unsigned long bus_clk;
include/fsl_esdhc.h +10 -1
@@ -32,7 +32,9 @@#define SYSCTL 0x0002e02c#define SYSCTL_INITA 0x08000000#define SYSCTL_TIMEOUT_MASK 0x000f0000 -#define SYSCTL_CLOCK_MASK 0x00000fff +#define SYSCTL_CLOCK_MASK 0x0000fff0 +#define SYSCTL_RSTA 0x01000000 +#define SYSCTL_CKEN 0x00000008#define SYSCTL_PEREN 0x00000004#define SYSCTL_HCKEN 0x00000002#define SYSCTL_IPGEN 0x00000001
@@ -142,8 +144,15 @@#define ESDHC_HOSTCAPBLT_DMAS 0x00400000#define ESDHC_HOSTCAPBLT_HSS 0x00200000 +struct fsl_esdhc_cfg { +u32 esdhc_base; +u32 no_snoop; +u32 clk_enable; +}; +#ifdef CONFIG_FSL_ESDHC int fsl_esdhc_mmc_init (bd_t *bis); +int fsl_esdhc_initialize (bd_t *bis,struct fsl_esdhc_cfg *cfg);void fdt_fixup_esdhc (void *blob,bd_t *bd);#else static inline int fsl_esdhc_mmc_init (bd_t *bis) {return -ENOSYS ; }
lib_arm/board.c +3 -0
@@ -243,6 +243,9 @@ init_fnc_t *init_sequence[] = { interrupt_init, /* set up exceptions */ #endif timer_init, /* initialize timer */ +#ifdef CONFIG_FSL_ESDHC + get_clocks, +#endif env_init, /* initialize environment */ init_baudrate, /* initialze baudrate settings */ serial_init, /* serial communications setup */
Signature · 1 line
1.6.3.3
PATCH v5 10/11 fsl_esdhc: add support for mx51 processor
The esdhc controller in the mx51 processor is quite the same as the one in some powerpc processors (MPC83xx, MPC85xx). This patches adapts the driver to support the arm mx51.
---
Changes since last version:
added missing prototype in speed.c
cpu/arm_cortexa8/mx51/Makefile | 2 +- cpu/arm_cortexa8/mx51/speed.c | 39 +++++++++++ drivers/mmc/fsl_esdhc.c | 149 +++++++++++++++++++++++++++------------- include/asm-arm/global_data.h | 3 + include/fsl_esdhc.h | 27 +++++++ lib_arm/board.c | 3 + 6 files changed, 174 insertions(+), 49 deletions(-) create mode 100644 cpu/arm_cortexa8/mx51/speed.c
cpu/arm_cortexa8/mx51/Makefile +1 -1
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).a -COBJS = soc.o clock.o iomux.o timer.o +COBJS = soc.o clock.o iomux.o timer.o speed.o SOBJS = lowlevel_init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
cpu/arm_cortexa8/mx51/speed.c new file +39 -0
@@ -0,0 +1,39 @@ +/* +* (C) Copyright 2000-2003 +* Wolfgang Denk, DENX Software Engineering, wd at denx.de. +* +* Copyright (C) 2004-2007 Freescale Semiconductor, Inc. +* TsiChung Liew (Tsi-Chung.Liew at freescale.com) +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#include <common.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> + +int get_clocks (void ) +{ +DECLARE_GLOBAL_DATA_PTR ; + +#ifdef CONFIG_FSL_ESDHC + gd->sdhc_clk =mxc_get_clock (MXC_IPG_PERCLK ); +#endif +return 0 ; +}
drivers/mmc/fsl_esdhc.c +101 -48
296 lines not on this page · raw message
include/asm-arm/global_data.h +3 -0
@@ -44,6 +44,9 @@ typedef struct global_data {#ifdef CONFIG_VFD unsigned char vfd_type;/* display type */ #endif +#ifdef CONFIG_FSL_ESDHC +unsigned long sdhc_clk; +#endif #if 0 unsigned long cpu_clk;/* CPU clock in Hz! */ unsigned long bus_clk;
include/fsl_esdhc.h +27 -0
@@ -27,12 +27,15 @@#define __FSL_ESDHC_H__#include <asm/errno.h> +#include <asm/byteorder.h> /* FSL eSDHC-specific constants */ #define SYSCTL 0x0002e02c#define SYSCTL_INITA 0x08000000#define SYSCTL_TIMEOUT_MASK 0x000f0000#define SYSCTL_CLOCK_MASK 0x0000fff0 +#define SYSCTL_RSTA 0x01000000 +#define SYSCTL_CKEN 0x00000008#define SYSCTL_PEREN 0x00000004#define SYSCTL_HCKEN 0x00000002#define SYSCTL_IPGEN 0x00000001
@@ -142,8 +145,32 @@#define ESDHC_HOSTCAPBLT_DMAS 0x00400000#define ESDHC_HOSTCAPBLT_HSS 0x00200000 +struct fsl_esdhc_cfg { +u32 esdhc_base; +u32 no_snoop; +u32 clk_enable; +}; + +/* Select the correct accessors depending on endianess */ +#if __BYTE_ORDER == __LITTLE_ENDIAN +#define esdhc_read32 in_le32 +#define esdhc_write32 out_le32 +#define esdhc_clrsetbits32 clrsetbits_le32 +#define esdhc_clrbits32 clrbits_le32 +#define esdhc_setbits32 setbits_le32 +#elif __BYTE_ORDER == __BIG_ENDIAN +#define esdhc_read32 in_be32 +#define esdhc_write32 out_be32 +#define esdhc_clrsetbits32 clrsetbits_be32 +#define esdhc_clrbits32 clrbits_be32 +#define esdhc_setbits32 setbits_be32 +#else +#error "Endianess is not defined: please fix to continue" +#endif +#ifdef CONFIG_FSL_ESDHC int fsl_esdhc_mmc_init (bd_t *bis); +int fsl_esdhc_initialize (bd_t *bis,struct fsl_esdhc_cfg *cfg);void fdt_fixup_esdhc (void *blob,bd_t *bd);#else static inline int fsl_esdhc_mmc_init (bd_t *bis) {return -ENOSYS ; }
lib_arm/board.c +3 -0
@@ -243,6 +243,9 @@ init_fnc_t *init_sequence[] = { interrupt_init, /* set up exceptions */ #endif timer_init, /* initialize timer */ +#ifdef CONFIG_FSL_ESDHC + get_clocks, +#endif env_init, /* initialize environment */ init_baudrate, /* initialze baudrate settings */ serial_init, /* serial communications setup */
Signature · 1 line
1.6.3.3
PATCH v5 10/11 fsl_esdhc: add support for mx51 processor
Quoted 7 lines · Stefano Babic
The esdhc controller in the mx51 processor is quite the same as the one in some powerpc processors (MPC83xx, MPC85xx). This patches adapts the driver to support the arm mx51.
Signed-off-by Stefano Babic <[email protected]>---
Do you have any time to possible test a few patches to fsl_esdhc on mx51?
- k
PATCH v5 10/11 fsl_esdhc: add support for mx51 processor
Hi Kumar,
Quoted 11 lines · Stefano Babic
Quoted 8 lines
The esdhc controller in the mx51 processor is quite the same as the one in some powerpc processors (MPC83xx, MPC85xx). This patches adapts the driver to support the arm mx51.
Signed-off-by Stefano Babic <[email protected]>---
Do you have any time to possible test a few patches to
fsl_esdhcon mx51?
At the moment Stefano is somewhat under water currently - I hope he will resurface beginning next week. What exactly do you want him to test?
Cheers
Detlev
Signature · 9 lines
... that every year or so they're going to give you a new release full of 50 000 additional lines of code all written by monkeys. Because they generally follow the ``million monkeys typing, and eventually they'll come up with something useful'' school of system development. -- Richard M. Stallman -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de
PATCH v5 10/11 fsl_esdhc: add support for mx51 processor
Quoted 9 lines · Detlev Zundel
Hi Kumar,
Quoted 7 lines · Stefano Babic
Quoted 6 lines
The esdhc controller in the mx51 processor is quite the same as the one in some powerpc processors (MPC83xx, MPC85xx). This patches adapts the driver to support the arm mx51.
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Signed-off-by Stefano Babic <[email protected]>---
Do you have any time to possible test a few patches to
fsl_esdhcon mx51?At the moment Stefano is somewhat under water currently - I hope he will resurface beginning next week. What exactly do you want him to test?
I've got a few patches from our internal team for PQ3/eSHDC support and want to make sure they didn't break mx51 support.
I'll post the patches once I clean them up (not 100% sure on the rationale for all of them at this point).
- k
PATCH v5 10/11 fsl_esdhc: add support for mx51 processor
In reply to Kumar GalaQuoted 2 lines · Kumar Gala
Do you have any time to possible test a few patches to
fsl_esdhcon mx51?
Hi Kumar,
I could test your patches next week, I have no possibility to access to the imx51evk board before. Should be ok for you ?
Stefano
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================
PATCH v5 10/11 fsl_esdhc: add support for mx51 processor
Quoted 8 lines · stefano babic
Quoted 2 lines · Kumar Gala
Do you have any time to possible test a few patches to
fsl_esdhcon mx51?Hi Kumar,
I could test your patches next week, I have no possibility to access to the imx51evk board before. Should be ok for you ?
Next week is fine, I just posted the set of 3. We have another for multi block read support, but I'm waiting on the guys to answer some questions for me about the patch possible having some bugs.
- k