KVM test: Add monotonic_time into the guest test
PATCH 1/4 KVM test: Add monotonic_time into the guest test
Monotonic_time is used to test gettimeofday(), TSC and clock_gettime(CLOCK_MONOTONIC) which is useful to test the virutal timer device.
--- .../kvm/autotest_control/monotonic_time.control | 37 ++++++++++++++++++++ client/tests/kvm/tests_base.cfg.sample | 3 ++ 2 files changed, 40 insertions(+), 0 deletions(-) create mode 100644 client/tests/kvm/autotest_control/monotonic_time.control
client/tests/kvm/autotest_control/monotonic_time.control new file +37 -0
@@ -0,0 +1,37 @@ +NAME = 'monotonic_time' +AUTHOR = 'Michael Davidson <[email protected]>' +TIME = 'MEDIUM' +TEST_CLASS = 'Kernel' +TEST_CATEGORY = 'Functional' +TEST_TYPE = 'client' +DOC = """ +monotonic_time checks various time interfaces: + gettimeofday() + clock_gettime(CLOCK_MONTONIC) + TSC +for monotonicity. + +Based on time-warp-test.c by Ingo Molnar. +""" + +# +# Test gettimeofday(), TSC, and clock_gettime(CLOCK_MONOTONIC) +# +# Tests run for 'duration' seconds and check that the selected +# time interface does not go backwards by more than 'threshold'. +# +# Note that the threshold value has the same resolution as the +# clock source: +# gettimeofday() - microseconds +# clock_gettime(CLOCK_MONOTONIC) - nanoseconds +# TSC - CPU clock cycles +# +# +job.run_test('monotonic_time', tag='gtod', test_type='gtod', + duration=300, threshold=0) + +job.run_test('monotonic_time', tag='clock', test_type='clock', + duration=300, threshold=0) + +job.run_test('monotonic_time', tag='tsc', test_type='tsc', + duration=300, threshold=0)
client/tests/kvm/tests_base.cfg.sample +3 -0
@@ -133,6 +133,9 @@ variants: - cpu_hotplug: test_name = cpu_hotplug test_control_file = cpu_hotplug.control + - monotonic_time: + test_name = monotonic_time + test_control_file = monotonic_time.control - linux_s3: install setup unattended_install type = linux_s3
PATCH 2/4 KVM test: Add TSC into guest test
TSC is used to check the whether the TSC of processors are synchronized which is useful for testing virtual TSC.
--- client/tests/kvm/autotest_control/tsc.control | 13 +++++++++++++ client/tests/kvm/tests_base.cfg.sample | 3 +++ 2 files changed, 16 insertions(+), 0 deletions(-) create mode 100644 client/tests/kvm/autotest_control/tsc.control
client/tests/kvm/autotest_control/tsc.control new file +13 -0
@@ -0,0 +1,13 @@ +NAME = 'Check TSC' +AUTHOR = 'Michael Davidson <[email protected]>' +TIME = 'MEDIUM' +TEST_CLASS = 'Kernel' +TEST_CATEGORY = 'Functional' +TEST_TYPE = 'client' +DOC = """ +checktsc is a user space program that checks TSC synchronization +between pairs of CPUs on an SMP system using a technique borrowed +from the Linux 2.6.18 kernel. +""" + +job.run_test('tsc')
client/tests/kvm/tests_base.cfg.sample +3 -0
@@ -136,6 +136,9 @@ variants: - monotonic_time: test_name = monotonic_time test_control_file = monotonic_time.control + - tsc: + test_name = tsc + test_control_file = tsc.control - linux_s3: install setup unattended_install type = linux_s3
Re: [Autotest] [PATCH 2/4] KVM test: Add TSC into guest test
Quoted 2 lines · Jason Wang
TSC is used to check the whether the TSC of processors are synchronized which is useful for testing virtual TSC.
The only thing that needs to be corrected here is that this test needs -smp > 1 to work (actually, even numbers work better), so I'll make it not available with -smp 1. Thanks for the patch, I am going to put it upstream soon!
Quoted 46 lines
Signed-off-by Jason Wang <[email protected]>---
client/tests/kvm/autotest_control/tsc.control | 13 +++++++++++++ client/tests/kvm/tests_base.cfg.sample | 3 +++2 files changed, 16 insertions(+), 0 deletions(-)create mode 100644 client/tests/kvm/autotest_control/tsc.control
client/tests/kvm/autotest_control/tsc.control new file +13
-0@@ -0,0 +1,13 @@ +NAME = 'Check TSC' +AUTHOR = 'Michael Davidson <[email protected]>' +TIME = 'MEDIUM' +TEST_CLASS = 'Kernel' +TEST_CATEGORY = 'Functional' +TEST_TYPE = 'client' +DOC = """ +checktsc is a user space program that checks TSC synchronization +between pairs of CPUs on an SMP system using a technique borrowed +from the Linux 2.6.18 kernel. +""" + +job.run_test('tsc')client/tests/kvm/tests_base.cfg.sample +0
-0@@ -136,6 +136,9 @@ variants:-
monotonic_time:
test_name=monotonic_timetest_control_file= monotonic_time.control
+ - tsc:
+ test_name = tsc
+ test_control_file = tsc.control-
linux_s3: install setupunattended_installtype =linux_s3_______________________________________________
Autotest mailing list
[email protected]
http://test.kernel.org/cgi-bin/mailman/listinfo/autotest
Signature · 1 line
Lucas
Re: [Autotest] [PATCH 2/4] KVM test: Add TSC into guest test
Quoted 12 lines · Lucas Meneghel Rodrigues
Quoted 3 lines · Jason Wang
TSC is used to check the whether the TSC of processors are synchronized which is useful for testing virtual TSC.
The only thing that needs to be corrected here is that this test needs -smp > 1 to work (actually, even numbers work better), so I'll make it not available with -smp 1. Thanks for the patch, I am going to put it upstream soon!
I agree, and maybe we'd better also use smp > 1 in the test of monotonic_time ?
Quoted 51 lines
Quoted 47 lines
Signed-off-by Jason Wang <[email protected]>--- client/tests/kvm/autotest_control/tsc.control | 13 +++++++++++++ client/tests/kvm/tests_base.cfg.sample | 3 +++ 2 files changed, 16 insertions(+), 0 deletions(-) create mode 100644 client/tests/kvm/autotest_control/tsc.controlclient/tests/kvm/autotest_control/tsc.control new file +13
-0@@ -0,0 +1,13 @@ +NAME = 'Check TSC' +AUTHOR = 'Michael Davidson <[email protected]>' +TIME = 'MEDIUM' +TEST_CLASS = 'Kernel' +TEST_CATEGORY = 'Functional' +TEST_TYPE = 'client' +DOC = """ +checktsc is a user space program that checks TSC synchronization +between pairs of CPUs on an SMP system using a technique borrowed +from the Linux 2.6.18 kernel. +""" + +job.run_test('tsc')client/tests/kvm/tests_base.cfg.sample +3
-0@@ -136,6 +136,9 @@ variants: - monotonic_time: test_name = monotonic_time test_control_file = monotonic_time.control + - tsc: + test_name = tsc + test_control_file = tsc.control - linux_s3: install setup unattended_install type = linux_s3_______________________________________________
Autotest mailing list
[email protected]
http://test.kernel.org/cgi-bin/mailman/listinfo/autotest
Re: [Autotest] [PATCH 2/4] KVM test: Add TSC into guest test
Quoted 7 lines · Jason Wang
Quoted 6 lines · Lucas Meneghel Rodrigues
Quoted 3 lines · Jason Wang
TSC is used to check the whether the TSC of processors are synchronized which is useful for testing virtual TSC.
Quoted 8 lines
Quoted 6 lines
The only thing that needs to be corrected here is that this test needs -smp > 1 to work (actually, even numbers work better), so I'll make it not available with -smp 1. Thanks for the patch, I am going to put it upstream soon!
I agree, and maybe we'd better also use smp > 1 in the test of
monotonic_time?
Monotonic time has not this restriction, as far as I know... Unless I am very mistaken
Quoted 57 lines
Quoted 41 lines
Quoted 41 lines
Signed-off-by Jason Wang <[email protected]>---
client/tests/kvm/autotest_control/tsc.control | 13 +++++++++++++ client/tests/kvm/tests_base.cfg.sample | 3 +++2 files changed, 16 insertions(+), 0 deletions(-)create mode 100644 client/tests/kvm/autotest_control/tsc.control
client/tests/kvm/autotest_control/tsc.control new file +13
-0@@ -0,0 +1,13 @@ +NAME = 'Check TSC' +AUTHOR = 'Michael Davidson <[email protected]>' +TIME = 'MEDIUM' +TEST_CLASS = 'Kernel' +TEST_CATEGORY = 'Functional' +TEST_TYPE = 'client' +DOC = """ +checktsc is a user space program that checks TSC synchronization +between pairs of CPUs on an SMP system using a technique borrowed +from the Linux 2.6.18 kernel. +""" + +job.run_test('tsc')client/tests/kvm/tests_base.cfg.sample +0
-0@@ -136,6 +136,9 @@ variants:-
monotonic_time:
test_name=monotonic_timetest_control_file= monotonic_time.control
+ - tsc:
+ test_name = tsc
+ test_control_file = tsc.control-
linux_s3: install setupunattended_installtype =linux_s3Quoted 10 lines
Quoted 6 lines
_______________________________________________
Autotest mailing list
[email protected]
http://test.kernel.org/cgi-bin/mailman/listinfo/autotest_______________________________________________
Autotest mailing list
[email protected]
http://test.kernel.org/cgi-bin/mailman/listinfo/autotest
Signature · 1 line
Lucas
Re: [Autotest] [PATCH 2/4] KVM test: Add TSC into guest test
Quoted 18 lines · Lucas Meneghel Rodrigues
Quoted 16 lines · Jason Wang
Quoted 14 lines · Lucas Meneghel Rodrigues
Quoted 4 lines · Jason Wang
TSC is used to check the whether the TSC of processors are synchronized which is useful for testing virtual TSC.
The only thing that needs to be corrected here is that this test needs -smp > 1 to work (actually, even numbers work better), so I'll make it not available with -smp 1. Thanks for the patch, I am going to put it upstream soon!
Quoted 8 lines
Quoted 3 lines
I agree, and maybe we'd better also use smp > 1 in the test of
monotonic_time?Monotonic time has not this restriction, as far as I know... Unless I am very mistaken
Yes, it does not have such restriction, but I think it would be more reasonable to do the test in smp > 2 especially for kvmclock as it depends on per-vcpu data structure and guest tsc which may have more problems during the vcpu migration between physical processors.
Quoted 61 lines
Quoted 57 lines
Quoted 41 lines
Quoted 41 lines
Signed-off-by Jason Wang <[email protected]>--- client/tests/kvm/autotest_control/tsc.control | 13 +++++++++++++ client/tests/kvm/tests_base.cfg.sample | 3 +++ 2 files changed, 16 insertions(+), 0 deletions(-) create mode 100644 client/tests/kvm/autotest_control/tsc.controlclient/tests/kvm/autotest_control/tsc.control new file +13
-0@@ -0,0 +1,13 @@ +NAME = 'Check TSC' +AUTHOR = 'Michael Davidson <[email protected]>' +TIME = 'MEDIUM' +TEST_CLASS = 'Kernel' +TEST_CATEGORY = 'Functional' +TEST_TYPE = 'client' +DOC = """ +checktsc is a user space program that checks TSC synchronization +between pairs of CPUs on an SMP system using a technique borrowed +from the Linux 2.6.18 kernel. +""" + +job.run_test('tsc')client/tests/kvm/tests_base.cfg.sample +3
-0@@ -136,6 +136,9 @@ variants: - monotonic_time: test_name = monotonic_time test_control_file = monotonic_time.control + - tsc: + test_name = tsc + test_control_file = tsc.control - linux_s3: install setup unattended_install type = linux_s3Quoted 10 lines
Quoted 7 lines
_______________________________________________
Autotest mailing list
[email protected]
http://test.kernel.org/cgi-bin/mailman/listinfo/autotest_______________________________________________
Autotest mailing list
[email protected]
http://test.kernel.org/cgi-bin/mailman/listinfo/autotest
PATCH 3/4 KVM test: Add scrashme into guest test
In reply to Jason WangThis patch let the scrashme run in the guest. Scrashme is one kind of fuzzing or stress test through systemcall. It should be useful in testing the VMM.
--- client/tests/kvm/autotest_control/scrashme.control | 14 ++++++++++++++ client/tests/kvm/tests_base.cfg.sample | 3 +++ 2 files changed, 17 insertions(+), 0 deletions(-) create mode 100644 client/tests/kvm/autotest_control/scrashme.control
client/tests/kvm/autotest_control/scrashme.control new file +14 -0
@@ -0,0 +1,14 @@ +NAME='scrashme' +AUTHOR='Yi Yang <[email protected]>' +TEST_CATEGORY='Stress' +TEST_CLASS='Kernel' +TEST_TYPE='client' +TIME='MEDIUM' +DOC=''' +Runs the scrashme suite located at: +http://www.codemonkey.org.uk/projects/scrashme/ + +Runs the scrashme syscalls test suite. This test mode will exercise +kernel syscalls randomically, or in a sequential fashion. +''' +job.run_test('scrashme')
client/tests/kvm/tests_base.cfg.sample +3 -0
@@ -139,6 +139,9 @@ variants: - tsc: test_name = tsc test_control_file = tsc.control + - scrashme: + test_name = scrashme + test_control_file = scrashme.control - linux_s3: install setup unattended_install type = linux_s3
Re: [PATCH 3/4] KVM test: Add scrashme into guest test
This test was applied, but I changed the argument list to execute the test with --mode=random, that is, random syscalls will be tested with random values.
Quoted 51 lines · Jason Wang
This patch let the scrashme run in the guest. Scrashme is one kind of fuzzing or stress test through systemcall. It should be useful in testing the VMM.
Signed-off-by Jason Wang <[email protected]>---
client/tests/kvm/autotest_control/scrashme.control | 14 ++++++++++++++ client/tests/kvm/tests_base.cfg.sample | 3 +++2 files changed, 17 insertions(+), 0 deletions(-)create mode 100644 client/tests/kvm/autotest_control/scrashme.control
client/tests/kvm/autotest_control/scrashme.control new file +14
-0@@ -0,0 +1,14 @@ +NAME='scrashme' +AUTHOR='Yi Yang <[email protected]>' +TEST_CATEGORY='Stress' +TEST_CLASS='Kernel' +TEST_TYPE='client' +TIME='MEDIUM' +DOC=''' +Runs the scrashme suite located at: +http://www.codemonkey.org.uk/projects/scrashme/ + +Runs the scrashme syscalls test suite. This test mode will exercise +kernel syscalls randomically, or in a sequential fashion. +''' +job.run_test('scrashme')client/tests/kvm/tests_base.cfg.sample +0
-0@@ -139,6 +139,9 @@ variants:- tsc:
test_name= tsctest_control_file= tsc.control
+ - scrashme:
+ test_name = scrashme
+ test_control_file = scrashme.control-
linux_s3: install setupunattended_installtype =linux_s3_______________________________________________
Autotest mailing list
[email protected]
http://test.kernel.org/cgi-bin/mailman/listinfo/autotest
Signature · 1 line
Lucas
PATCH 4/4 KVM test: Enable timedrift for Linux guests
In reply to Jason WangWe should also test timedrift for Linux guests especially for guest with pvclock. So this patch enable the timedrift for linux guests.
--- client/tests/kvm/tests_base.cfg.sample | 11 ++++++++++- 1 files changed, 10 insertions(+), 1 deletions(-)
client/tests/kvm/tests_base.cfg.sample +10 -1
@@ -330,7 +330,7 @@ variants: variants: # Linux section - @Linux: - no timedrift autoit + no autoit shutdown_command = shutdown -h now reboot_command = shutdown -r now status_test_command = echo $?
@@ -342,6 +342,15 @@ variants: file_transfer_port = 22 mem_chk_cmd = dmidecode -t 17 | awk -F: '/Size/ {print $2}' cpu_chk_cmd = grep -c processor /proc/cpuinfo + timedrift: + time_command = date +'TIME: %a %m/%d/%Y %H:%M:%S.%N' + time_filter_re = "(?:TIME: \w\w\w )(.{19})(?:\.\d\d)" + time_format = "%m/%d/%Y %H:%M:%S" + guest_load_command = "dd if=/dev/urandom of=/dev/null" + guest_load_instances = 2 + guest_load_clean_cmd = "killall -9 dd" + host_load_command = "bzip2 -c --best /dev/urandom > /dev/null" + host_load_instances = 8 variants: - Fedora: