ipv4: Restart rt_intern_hash after emergency rebuild
Subsystems (3)
PATCH 2/2 ipv4: Restart rt_intern_hash after emergency rebuild
The the rebuild changes the genid which in turn is used at the hash calculation. Thus if we don't restart and go on with the inserting the rt will happen in wrong chain.
This doesn't seem critical to me, since the proper rt entry will be hashed at next skb.
--- net/ipv4/route.c | 18 ++++++++++++------ 1 files changed, 12 insertions(+), 6 deletions(-)
net/ipv4/route.c +12 -6
@@ -1097,7 +1097,7 @@ static int slow_chain_length(const struct rtable *head) }static int rt_intern_hash (unsigned hash,struct rtable *rt, -struct rtable **rp,struct sk_buff *skb) +struct rtable **rp,struct sk_buff *skb,int in) {struct rtable *rth, **rthp;unsigned long now;
@@ -1217,6 +1217,12 @@ restart: rt->u.dst.dev->name, num); }rt_emergency_hash_rebuild (net); +spin_unlock_bh (rt_hash_lock_addr (hash)); + + hash =rt_hash (rt->fl.fl4_dst, rt->fl.fl4_src, + in ? rt->fl.iif : rt->fl.oif, +rt_genid (net)); + goto restart; } }
@@ -1477,7 +1483,7 @@ void ip_rt_redirect(__be32 old_gw, __be32 daddr, __be32 new_gw, &netevent);rt_del (hash, rth); -if (!rt_intern_hash (hash, rt, &rt,NULL )) +if (!rt_intern_hash (hash, rt, &rt,NULL ,0 ))ip_rt_put (rt); goto do_next; }
@@ -1930,7 +1936,7 @@ static int ip_route_input_mc(struct sk_buff *skb, __be32 daddr, __be32 saddr,in_dev_put (in_dev); hash =rt_hash (daddr, saddr, dev->ifindex,rt_genid (dev_net (dev))); -return rt_intern_hash (hash, rth,NULL , skb); +return rt_intern_hash (hash, rth,NULL , skb,1 ); e_nobufs:in_dev_put (in_dev);
@@ -2097,7 +2103,7 @@ static int ip_mkroute_input(struct sk_buff *skb,/* put it into the cache */ hash =rt_hash (daddr, saddr, fl->iif,rt_genid (dev_net (rth->u.dst.dev))); -return rt_intern_hash (hash, rth,NULL , skb); +return rt_intern_hash (hash, rth,NULL , skb,1 ); }/*
@@ -2254,7 +2260,7 @@ local_input: } rth->rt_type = res.type; hash =rt_hash (daddr, saddr, fl.iif,rt_genid (net)); - err =rt_intern_hash (hash, rth,NULL , skb); + err =rt_intern_hash (hash, rth,NULL , skb,1 ); goto done; no_route:
@@ -2501,7 +2507,7 @@ static int ip_mkroute_output(struct rtable **rp,if (err ==0 ) { hash =rt_hash (oldflp->fl4_dst, oldflp->fl4_src, oldflp->oif,rt_genid (dev_net (dev_out))); - err =rt_intern_hash (hash, rth, rp,NULL ); + err =rt_intern_hash (hash, rth, rp,NULL ,0 ); }return err;
Quoted 27 lines · Pavel Emelyanov
The the rebuild changes the genid which in turn is used at the hash calculation. Thus if we don't restart and go on with the inserting the rt will happen in wrong chain.
This doesn't seem critical to me, since the proper rt entry will be hashed at next skb.
Signed-off-by Pavel Emelyanov <[email protected]>--- net/ipv4/route.c | 18 ++++++++++++------ 1 files changed, 12 insertions(+), 6 deletions(-)net/ipv4/route.c +1
-1@@ -1097,7 +1097,7 @@ static int slow_chain_length(const struct rtable *head) }static int rt_intern_hash (unsigned hash,struct rtable *rt, -struct rtable **rp,struct sk_buff *skb) +struct rtable **rp,struct sk_buff *skb,int in) {struct rtable *rth, **rthp;unsigned long now;@@ -1217,6 +1217,12 @@ restart: rt->u.dst.dev->name, num);
net/ipv4/route.c restart: · line 1227
Quoted 10 lines
net/ipv4/route.c +6
-0}rt_emergency_hash_rebuild (net); +spin_unlock_bh (rt_hash_lock_addr (hash)); + + hash =rt_hash (rt->fl.fl4_dst, rt->fl.fl4_src, + in ? rt->fl.iif : rt->fl.oif, +rt_genid (net)); + goto restart; } }
Why pass in a flag here? Perhaps it would be easier just to pass in the ifindex that was origionally used by the caller of rt_intern_hash so that the hash could be redone without needing to toggle on the value of the flag.
Regards
Neil
Quoted 1 line
Quoted 7 lines
Quoted 7 lines
net/ipv4/route.c +3
-0@@ -1217,6 +1217,12 @@ restart: rt->u.dst.dev->name, num); }rt_emergency_hash_rebuild (net); +spin_unlock_bh (rt_hash_lock_addr (hash)); + + hash = rt_hash(rt->fl.fl4_dst, rt->fl.fl4_src,
Quoted 8 lines
net/ipv4/route.c restart: · line 1227
Quoted 5 lines
net/ipv4/route.c +3
-0+ in ? rt->fl.iif : rt->fl.oif, + rt_genid(net)); + goto restart; } }Why pass in a flag here? Perhaps it would be easier just to pass in the ifindex that was origionally used by the caller of
rt_intern_hashso that the hash could be redone without needing to toggle on the value of the flag.
That's perfectly fine with me. I'll resend the patch shortly.
Quoted 5 lines
Regards
NeilQuoted 1 line
PATCH 2/2 ipv4: Restart rt_intern_hash after emergency rebuild (v2)
In reply to Pavel EmelyanovThe the rebuild changes the genid which in turn is used at the hash calculation. Thus if we don't restart and go on with inserting the rt will happen in wrong chain.
(Fixed Neil's comment about the index passed into the rt_intern_hash)
--- net/ipv4/route.c | 17 +++++++++++------ 1 files changed, 11 insertions(+), 6 deletions(-)
net/ipv4/route.c +11 -6
@@ -1097,7 +1097,7 @@ static int slow_chain_length(const struct rtable *head) }static int rt_intern_hash (unsigned hash,struct rtable *rt, -struct rtable **rp,struct sk_buff *skb) +struct rtable **rp,struct sk_buff *skb,int ifindex) {struct rtable *rth, **rthp;unsigned long now;
@@ -1217,6 +1217,11 @@ restart: rt->u.dst.dev->name, num); }rt_emergency_hash_rebuild (net); +spin_unlock_bh (rt_hash_lock_addr (hash)); + + hash =rt_hash (rt->fl.fl4_dst, rt->fl.fl4_src, + ifindex,rt_genid (net)); + goto restart; } }
@@ -1477,7 +1482,7 @@ void ip_rt_redirect(__be32 old_gw, __be32 daddr, __be32 new_gw, &netevent);rt_del (hash, rth); -if (!rt_intern_hash (hash, rt, &rt,NULL )) +if (!rt_intern_hash (hash, rt, &rt,NULL , rt->fl.oif))ip_rt_put (rt); goto do_next; }
@@ -1930,7 +1935,7 @@ static int ip_route_input_mc(struct sk_buff *skb, __be32 daddr, __be32 saddr,in_dev_put (in_dev); hash =rt_hash (daddr, saddr, dev->ifindex,rt_genid (dev_net (dev))); -return rt_intern_hash (hash, rth,NULL , skb); +return rt_intern_hash (hash, rth,NULL , skb, dev->ifindex); e_nobufs:in_dev_put (in_dev);
@@ -2097,7 +2102,7 @@ static int ip_mkroute_input(struct sk_buff *skb,/* put it into the cache */ hash =rt_hash (daddr, saddr, fl->iif,rt_genid (dev_net (rth->u.dst.dev))); -return rt_intern_hash (hash, rth,NULL , skb); +return rt_intern_hash (hash, rth,NULL , skb, fl->iif); }/*
@@ -2254,7 +2259,7 @@ local_input: } rth->rt_type = res.type; hash =rt_hash (daddr, saddr, fl.iif,rt_genid (net)); - err =rt_intern_hash (hash, rth,NULL , skb); + err =rt_intern_hash (hash, rth,NULL , skb, fl.iif); goto done; no_route:
@@ -2501,7 +2506,7 @@ static int ip_mkroute_output(struct rtable **rp,if (err ==0 ) { hash =rt_hash (oldflp->fl4_dst, oldflp->fl4_src, oldflp->oif,rt_genid (dev_net (dev_out))); - err =rt_intern_hash (hash, rth, rp,NULL ); + err =rt_intern_hash (hash, rth, rp,NULL , oldflp->oif); }return err;
Signature · 1 line
1.5.5.6
Re: [PATCH 2/2] ipv4: Restart rt_intern_hash after emergency rebuild (v2)
Quoted 7 lines · Pavel Emelyanov
The the rebuild changes the genid which in turn is used at the hash calculation. Thus if we don't restart and go on with inserting the rt will happen in wrong chain.
(Fixed Neil's comment about the index passed into the
rt_intern_hash)Signed-off-by Pavel Emelyanov <[email protected]>
Thanks! I think this is pretty reasonable.
Re: [PATCH 2/2] ipv4: Restart rt_intern_hash after emergency rebuild (v2)
From: Neil Horman <[email protected]>
Date: Thu, 25 Mar 2010 09:17:21 -0400
Quoted 10 lines · Pavel Emelyanov
Quoted 7 lines
The the rebuild changes the genid which in turn is used at the hash calculation. Thus if we don't restart and go on with inserting the rt will happen in wrong chain.
(Fixed Neil's comment about the index passed into the
rt_intern_hash)Signed-off-by Pavel Emelyanov <[email protected]>Thanks! I think this is pretty reasonable.
Reviewed-by Neil Horman <[email protected]>
Applied, thanks.