Adding Support for SPEAr Platform under ARM architecture

new file mode 100644
index 0000000..a101f10
@@ -0,0 +1,59 @@
+/*
+ * arch/arm/include/asm/hardware/sp810.h
+ *
+ * ARM PrimeXsys System Controller SP810 header file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARM_SP810_H
+#define __ASM_ARM_SP810_H
+
+#include <linux/io.h>
+
+/* sysctl registers offset */
+#define SCCTRL			0x000
+#define SCSYSSTAT		0x004
+#define SCIMCTRL		0x008
+#define SCIMSTAT		0x00C
+#define SCXTALCTRL		0x010
+#define SCPLLCTRL		0x014
+#define SCPLLFCTRL		0x018
+#define SCPERCTRL0		0x01C
+#define SCPERCTRL1		0x020
+#define SCPEREN			0x024
+#define SCPERDIS		0x028
+#define SCPERCLKEN		0x02C
+#define SCPERSTAT		0x030
+#define SCSYSID0		0xEE0
+#define SCSYSID1		0xEE4
+#define SCSYSID2		0xEE8
+#define SCSYSID3		0xEEC
+#define SCITCR			0xF00
+#define SCITIR0			0xF04
+#define SCITIR1			0xF08
+#define SCITOR			0xF0C
+#define SCCNTCTRL		0xF10
+#define SCCNTDATA		0xF14
+#define SCCNTSTEP		0xF18
+#define SCPERIPHID0		0xFE0
+#define SCPERIPHID1		0xFE4
+#define SCPERIPHID2		0xFE8
+#define SCPERIPHID3		0xFEC
+#define SCPCELLID0		0xFF0
+#define SCPCELLID1		0xFF4
+#define SCPCELLID2		0xFF8
+#define SCPCELLID3		0xFFC
+
+static inline void sysctl_soft_reset(void __iomem *base)
+{
+	/* writing any value to SCSYSSTAT reg will reset system */
+	writel(0, base + SCSYSSTAT);
+}
+
+#endif	/* __ASM_ARM_SP810_H */

58 lines not on this page · raw message

new file mode 100644
index 0000000..451b208
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/gpio.h
+ *
+ * GPIO macros for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H
+
+#include <plat/gpio.h>
+
+#endif /* __MACH_GPIO_H */

new file mode 100644
index 0000000..4a86e6a
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/hardware.h
+ *
+ * Hardware definitions for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+/* Vitual to physical translation of statically mapped space */
+#define IO_ADDRESS(x)		(x | 0xF0000000)
+
+#endif /* __MACH_HARDWARE_H */

new file mode 100644
index 0000000..30cff8a
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/io.h
+ *
+ * IO definitions for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#include <plat/io.h>
+
+#endif /* __MACH_IO_H */

65 lines not on this page · raw message

new file mode 100644
index 0000000..5173522
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/memory.h
+ *
+ * Memory map for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MEMORY_H
+#define __MACH_MEMORY_H
+
+#include <plat/memory.h>
+
+#endif /* __MACH_MEMORY_H */

163 lines not on this page · raw message

144 lines not on this page · raw message

67 lines not on this page · raw message

46 lines not on this page · raw message

70 lines not on this page · raw message

new file mode 100644
index 0000000..92cee63
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/system.h
+ *
+ * SPEAr3xx Machine family specific architecture functions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SYSTEM_H
+#define __MACH_SYSTEM_H
+
+#include <plat/system.h>
+
+#endif /* __MACH_SYSTEM_H */

new file mode 100644
index 0000000..a38cc9d
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/timex.h
+ *
+ * SPEAr3XX machine family specific timex definitions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+#include <plat/timex.h>
+
+#endif /* __MACH_TIMEX_H */

new file mode 100644
index 0000000..53ba8bb
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#include <plat/uncompress.h>
+
+#endif /* __MACH_UNCOMPRESS_H */

new file mode 100644
index 0000000..df977b3
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/vmalloc.h
+ *
+ * Defining Vmalloc area for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_VMALLOC_H
+#define __MACH_VMALLOC_H
+
+#include <plat/vmalloc.h>
+
+#endif /* __MACH_VMALLOC_H */

45 lines not on this page · raw message

new file mode 100644
index 0000000..3a789db
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/gpio.h
+ *
+ * GPIO macros for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H
+
+#include <plat/gpio.h>
+
+#endif /* __MACH_GPIO_H */

new file mode 100644
index 0000000..7545116
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/hardware.h
+ *
+ * Hardware definitions for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+/* Vitual to physical translation of statically mapped space */
+#define IO_ADDRESS(x)		(x | 0xF0000000)
+
+#endif /* __MACH_HARDWARE_H */
+

new file mode 100644
index 0000000..fb7c106
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/io.h
+ *
+ * IO definitions for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#include <plat/io.h>
+
+#endif	/* __MACH_IO_H */
+

96 lines not on this page · raw message

new file mode 100644
index 0000000..781f088
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/memory.h
+ *
+ * Memory map for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MEMORY_H
+#define __MACH_MEMORY_H
+
+#include <plat/memory.h>
+
+#endif	/* __MACH_MEMORY_H */

173 lines not on this page · raw message

173 lines not on this page · raw message

new file mode 100644
index 0000000..c068cc5
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-spear66xx/include/mach/spear600.h
+ *
+ * SPEAr600 Machine specific definition
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifdef	CONFIG_MACH_SPEAR600
+
+#ifndef __MACH_SPEAR600_H
+#define __MACH_SPEAR600_H
+
+#endif /* __MACH_SPEAR600_H */
+
+#endif /* CONFIG_MACH_SPEAR600 */

new file mode 100644
index 0000000..0b1d2be
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/system.h
+ *
+ * SPEAr6xx Machine family specific architecture functions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SYSTEM_H
+#define __MACH_SYSTEM_H
+
+#include <plat/system.h>
+
+#endif	/* __MACH_SYSTEM_H */

new file mode 100644
index 0000000..ac1c5b0
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/timex.h
+ *
+ * SPEAr6XX machine family specific timex definitions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+#include <plat/timex.h>
+
+#endif	/* __MACH_TIMEX_H */

new file mode 100644
index 0000000..77f0765
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#include <plat/uncompress.h>
+
+#endif	/* __MACH_UNCOMPRESS_H */

new file mode 100644
index 0000000..4a0b56c
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/vmalloc.h
+ *
+ * Defining Vmalloc area for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_VMALLOC_H
+#define __MACH_VMALLOC_H
+
+#include <plat/vmalloc.h>
+
+#endif	/* __MACH_VMALLOC_H */

new file mode 100644
index 0000000..b857c91
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-spear/include/plat/gpio.h
+ *
+ * GPIO macros for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_GPIO_H
+#define __PLAT_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+#endif /* __PLAT_GPIO_H */

new file mode 100644
index 0000000..4d4ba82
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/plat-spear/include/plat/io.h
+ *
+ * IO definitions for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_IO_H
+#define __PLAT_IO_H
+
+#define IO_SPACE_LIMIT		0xFFFFFFFF
+
+#define __io(a)			__typesafe_io(a)
+#define __mem_pci(a)		(a)
+
+#endif /* __PLAT_IO_H */

new file mode 100644
index 0000000..27a4aba
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-spear/include/plat/memory.h
+ *
+ * Memory map for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_MEMORY_H
+#define __PLAT_MEMORY_H
+
+/* Physical DRAM offset */
+#define PHYS_OFFSET		UL(0x00000000)
+
+#endif /* __PLAT_MEMORY_H */

41 lines not on this page · raw message

new file mode 100644
index 0000000..914d09d
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/plat-spear/include/plat/timex.h
+ *
+ * SPEAr platform specific timex definitions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_TIMEX_H
+#define __PLAT_TIMEX_H
+
+#define CLOCK_TICK_RATE			48000000
+
+#endif /* __PLAT_TIMEX_H */

43 lines not on this page · raw message

new file mode 100644
index 0000000..09e9372
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/plat-spear/include/plat/vmalloc.h
+ *
+ * Defining Vmalloc area for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_VMALLOC_H
+#define __PLAT_VMALLOC_H
+
+#define VMALLOC_END		0xF0000000
+
+#endif /* __PLAT_VMALLOC_H */

new file mode 100755
index 0000000..39f6ccf
@@ -0,0 +1,389 @@
+/*
+ * arch/arm/mach-spear3xx/clock.c
+ *
+ * SPEAr3xx machines clock framework source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <mach/misc_regs.h>
+#include <plat/clock.h>
+
+/* root clks */
+/* 32 KHz oscillator clock */
+static struct clk osc_32k_clk = {
+	.flags = ALWAYS_ENABLED,
+	.rate = 32000,
+};
+
+/* 24 MHz oscillator clock */
+static struct clk osc_24m_clk = {
+	.flags = ALWAYS_ENABLED,
+	.rate = 24000000,
+};
+
+/* clock derived from 32 KHz osc clk */
+/* rtc clock */
+static struct clk rtc_clk = {
+	.pclk = &osc_32k_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = RTC_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from 24 MHz osc clk */
+/* pll1 configuration structure */
+static struct pll_clk_config pll1_config = {
+	.mode_reg = PLL1_CTR,
+	.cfg_reg = PLL1_FRQ,
+};
+
+/* PLL1 clock */
+static struct clk pll1_clk = {
+	.pclk = &osc_24m_clk,
+	.en_reg = PLL1_CTR,
+	.en_reg_bit = PLL_ENABLE,
+	.recalc = &pll1_clk_recalc,
+	.private_data = &pll1_config,
+};
+
+/* PLL3 48 MHz clock */
+static struct clk pll3_48m_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &osc_24m_clk,
+	.rate = 48000000,
+};
+
+/* watch dog timer clock */
+static struct clk wdt_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &osc_24m_clk,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from pll1 clk */
+/* cpu clock */
+static struct clk cpu_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &pll1_clk,
+	.recalc = &follow_parent,
+};
+
+/* ahb configuration structure */
+static struct bus_clk_config ahb_config = {
+	.reg = CORE_CLK_CFG,
+	.mask = PLL_HCLK_RATIO_MASK,
+	.shift = PLL_HCLK_RATIO_SHIFT,
+};
+
+/* ahb clock */
+static struct clk ahb_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &pll1_clk,
+	.recalc = &bus_clk_recalc,
+	.private_data = &ahb_config,
+};
+
+/* uart configurations */
+static struct aux_clk_config uart_config = {
+	.synth_reg = UART_CLK_SYNT,
+};
+
+/* uart parents */
+static struct pclk_info uart_pclk_info[] = {
+	{
+		.pclk = &pll1_clk,
+		.pclk_mask = AUX_CLK_PLL1_MASK,
+		.scalable = 1,
+	}, {
+		.pclk = &pll3_48m_clk,
+		.pclk_mask = AUX_CLK_PLL3_MASK,
+		.scalable = 0,
+	},
+};
+
+/* uart parent select structure */
+static struct pclk_sel uart_pclk_sel = {
+	.pclk_info = uart_pclk_info,
+	.pclk_count = ARRAY_SIZE(uart_pclk_info),
+	.pclk_sel_reg = PERIP_CLK_CFG,
+	.pclk_sel_mask = UART_CLK_MASK,
+};
+
+/* uart clock */
+static struct clk uart_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = UART_CLK_ENB,
+	.pclk_sel = &uart_pclk_sel,
+	.pclk_sel_shift = UART_CLK_SHIFT,
+	.recalc = &aux_clk_recalc,
+	.private_data = &uart_config,
+};
+
+/* firda configurations */
+static struct aux_clk_config firda_config = {
+	.synth_reg = FIRDA_CLK_SYNT,
+};
+
+/* firda parents */
+static struct pclk_info firda_pclk_info[] = {
+	{
+		.pclk = &pll1_clk,
+		.pclk_mask = AUX_CLK_PLL1_MASK,
+		.scalable = 1,
+	}, {
+		.pclk = &pll3_48m_clk,
+		.pclk_mask = AUX_CLK_PLL3_MASK,
+		.scalable = 0,
+	},
+};
+
+/* firda parent select structure */
+static struct pclk_sel firda_pclk_sel = {
+	.pclk_info = firda_pclk_info,
+	.pclk_count = ARRAY_SIZE(firda_pclk_info),
+	.pclk_sel_reg = PERIP_CLK_CFG,
+	.pclk_sel_mask = FIRDA_CLK_MASK,
+};
+
+/* firda clock */
+static struct clk firda_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = FIRDA_CLK_ENB,
+	.pclk_sel = &firda_pclk_sel,
+	.pclk_sel_shift = FIRDA_CLK_SHIFT,
+	.recalc = &aux_clk_recalc,
+	.private_data = &firda_config,
+};
+
+/* gpt parents */
+static struct pclk_info gpt_pclk_info[] = {
+	{
+		.pclk = &pll1_clk,
+		.pclk_mask = AUX_CLK_PLL1_MASK,
+		.scalable = 1,
+	}, {
+		.pclk = &pll3_48m_clk,
+		.pclk_mask = AUX_CLK_PLL3_MASK,
+		.scalable = 0,
+	},
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt_pclk_sel = {
+	.pclk_info = gpt_pclk_info,
+	.pclk_count = ARRAY_SIZE(gpt_pclk_info),
+	.pclk_sel_reg = PERIP_CLK_CFG,
+	.pclk_sel_mask = GPT_CLK_MASK,
+};
+
+/* gpt0 configurations */
+static struct aux_clk_config gpt0_config = {
+	.synth_reg = PRSC1_CLK_CFG,
+};
+
+/* gpt0 timer clock */
+static struct clk gpt0_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel_shift = GPT0_CLK_SHIFT,
+	.recalc = &gpt_clk_recalc,
+	.private_data = &gpt0_config,
+};
+
+/* gpt1 configurations */
+static struct aux_clk_config gpt1_config = {
+	.synth_reg = PRSC2_CLK_CFG,
+};
+
+/* gpt1 timer clock */
+static struct clk gpt1_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GPT1_CLK_ENB,
+	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel_shift = GPT1_CLK_SHIFT,
+	.recalc = &gpt_clk_recalc,
+	.private_data = &gpt1_config,
+};
+
+/* gpt2 configurations */
+static struct aux_clk_config gpt2_config = {
+	.synth_reg = PRSC3_CLK_CFG,
+};
+
+/* gpt2 timer clock */
+static struct clk gpt2_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GPT2_CLK_ENB,
+	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel_shift = GPT2_CLK_SHIFT,
+	.recalc = &gpt_clk_recalc,
+	.private_data = &gpt2_config,
+};
+
+/* clock derived from pll3 clk */
+/* usbh clock */
+static struct clk usbh_clk = {
+	.pclk = &pll3_48m_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = USBH_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* usbd clock */
+static struct clk usbd_clk = {
+	.pclk = &pll3_48m_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = USBD_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* clcd clock */
+static struct clk clcd_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &pll3_48m_clk,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from ahb clk */
+/* apb configuration structure */
+static struct bus_clk_config apb_config = {
+	.reg = CORE_CLK_CFG,
+	.mask = HCLK_PCLK_RATIO_MASK,
+	.shift = HCLK_PCLK_RATIO_SHIFT,
+};
+
+/* apb clock */
+static struct clk apb_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &ahb_clk,
+	.recalc = &bus_clk_recalc,
+	.private_data = &apb_config,
+};
+
+/* i2c clock */
+static struct clk i2c_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = I2C_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* dma clock */
+static struct clk dma_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = DMA_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* jpeg clock */
+static struct clk jpeg_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = JPEG_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* gmac clock */
+static struct clk gmac_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GMAC_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* smi clock */
+static struct clk smi_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = SMI_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* c3 clock */
+static struct clk c3_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = C3_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from apb clk */
+/* adc clock */
+static struct clk adc_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = ADC_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* ssp clock */
+static struct clk ssp_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = SSP_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* gpio clock */
+static struct clk gpio_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GPIO_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* array of all spear 3xx clock lookups */
+static struct clk_lookup spear_clk_lookups[] = {
+	/* root clks */
+	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
+	{ .con_id = "osc_24m_clk",	.clk = &osc_24m_clk},
+	/* clock derived from 32 KHz osc clk */
+	{ .dev_id = "rtc",		.clk = &rtc_clk},
+	/* clock derived from 24 MHz osc clk */
+	{ .con_id = "pll1_clk",		.clk = &pll1_clk},
+	{ .con_id = "pll3_48m_clk",	.clk = &pll3_48m_clk},
+	{ .dev_id = "wdt",		.clk = &wdt_clk},
+	/* clock derived from pll1 clk */
+	{ .con_id = "cpu_clk",		.clk = &cpu_clk},
+	{ .con_id = "ahb_clk",		.clk = &ahb_clk},
+	{ .dev_id = "uart",		.clk = &uart_clk},
+	{ .dev_id = "firda",		.clk = &firda_clk},
+	{ .dev_id = "gpt0",		.clk = &gpt0_clk},
+	{ .dev_id = "gpt1",		.clk = &gpt1_clk},
+	{ .dev_id = "gpt2",		.clk = &gpt2_clk},
+	/* clock derived from pll3 clk */
+	{ .dev_id = "usbh",		.clk = &usbh_clk},
+	{ .dev_id = "usbd",		.clk = &usbd_clk},
+	{ .dev_id = "clcd",		.clk = &clcd_clk},
+	/* clock derived from ahb clk */
+	{ .con_id = "apb_clk",		.clk = &apb_clk},
+	{ .dev_id = "i2c",		.clk = &i2c_clk},
+	{ .dev_id = "dma",		.clk = &dma_clk},
+	{ .dev_id = "jpeg",		.clk = &jpeg_clk},
+	{ .dev_id = "gmac",		.clk = &gmac_clk},
+	{ .dev_id = "smi",		.clk = &smi_clk},
+	{ .dev_id = "c3",		.clk = &c3_clk},
+	/* clock derived from apb clk */
+	{ .dev_id = "adc",		.clk = &adc_clk},
+	{ .dev_id = "ssp",		.clk = &ssp_clk},
+	{ .dev_id = "gpio",		.clk = &gpio_clk},
+};
+
+void __init clk_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
+		clk_register(&spear_clk_lookups[i]);
+
+	recalc_root_clocks();
+}

new file mode 100644
index 0000000..a3d0733
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/clkdev.h
+ *
+ * Clock Dev framework definitions for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+#include <plat/clkdev.h>
+
+#endif /* __MACH_CLKDEV_H */

483 lines not on this page · raw message

new file mode 100644
index 0000000..05676bf
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/clkdev.h
+ *
+ * Clock Dev framework definitions for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+#include <plat/clkdev.h>
+
+#endif /* __MACH_CLKDEV_H */

435 lines not on this page · raw message

new file mode 100644
index 0000000..a2d0112
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-spear/include/plat/clkdev.h
+ *
+ * Clock Dev framework definitions for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_CLKDEV_H
+#define __PLAT_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif /* __PLAT_CLKDEV_H */

126 lines not on this page · raw message

292 lines not on this page · raw message

45 lines not on this page · raw message

55 lines not on this page · raw message

new file mode 100644
index 0000000..6eb62f9
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-spear3xx/spear310.c
+ *
+ * SPEAr310 machine source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/ptrace.h>
+#include <asm/irq.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Add spear310 specific devices here */
+
+void __init spear310_init(void)
+{
+	/* call spear3xx family common init function */
+	spear3xx_init();
+}

54 lines not on this page · raw message

new file mode 100644
index 0000000..72d4548
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-spear3xx/spear320.c
+ *
+ * SPEAr320 machine source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/ptrace.h>
+#include <asm/irq.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Add spear320 specific devices here */
+
+void __init spear320_init(void)
+{
+	/* call spear3xx family common init function */
+	spear3xx_init();
+}

54 lines not on this page · raw message

101 lines not on this page · raw message

new file mode 100644
index 0000000..5c484c4
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-spear6xx/spear600.c
+ *
+ * SPEAr600 machine source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/ptrace.h>
+#include <asm/irq.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Add spear600 specific devices here */
+
+void __init spear600_init(void)
+{
+	/* call spear6xx family common init function */
+	spear6xx_init();
+}

51 lines not on this page · raw message

158 lines not on this page · raw message

index aeea845..af7e02c 100644
@@ -19,7 +19,9 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/amba/bus.h>
+#include <plat/padmux.h>
 
+/* spear3xx declarations */
 /*
  * Each GPT has 2 timer channels
  * Following GPT channels will be used as clock source and clockevent

@@ -34,25 +36,170 @@ extern struct amba_device uart_device;
 extern struct sys_timer spear_sys_timer;
 
 /* Add spear3xx family function declarations here */
+void __init clk_init(void);
 void __init spear3xx_map_io(void);
 void __init spear3xx_init_irq(void);
 void __init spear3xx_init(void);
-void __init spear300_init(void);
-void __init spear310_init(void);
-void __init spear320_init(void);
-void __init clk_init(void);
+void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size);
 
-/* Add spear300 machine device structure declarations here */
+/* pad mux declarations */
+#define PMX_FIRDA_MASK		(1 << 14)
+#define PMX_I2C_MASK		(1 << 13)
+#define PMX_SSP_CS_MASK		(1 << 12)
+#define PMX_SSP_MASK		(1 << 11)
+#define PMX_MII_MASK		(1 << 10)
+#define PMX_GPIO_PIN0_MASK	(1 << 9)
+#define PMX_GPIO_PIN1_MASK	(1 << 8)
+#define PMX_GPIO_PIN2_MASK	(1 << 7)
+#define PMX_GPIO_PIN3_MASK	(1 << 6)
+#define PMX_GPIO_PIN4_MASK	(1 << 5)
+#define PMX_GPIO_PIN5_MASK	(1 << 4)
+#define PMX_UART0_MODEM_MASK	(1 << 3)
+#define PMX_UART0_MASK		(1 << 2)
+#define PMX_TIMER_3_4_MASK	(1 << 1)
+#define PMX_TIMER_1_2_MASK	(1 << 0)
+
+/* pad mux devices */
+extern struct pmx_dev pmx_firda;
+extern struct pmx_dev pmx_i2c;
+extern struct pmx_dev pmx_ssp_cs;
+extern struct pmx_dev pmx_ssp;
+extern struct pmx_dev pmx_mii;
+extern struct pmx_dev pmx_gpio_pin0;
+extern struct pmx_dev pmx_gpio_pin1;
+extern struct pmx_dev pmx_gpio_pin2;
+extern struct pmx_dev pmx_gpio_pin3;
+extern struct pmx_dev pmx_gpio_pin4;
+extern struct pmx_dev pmx_gpio_pin5;
+extern struct pmx_dev pmx_uart0_modem;
+extern struct pmx_dev pmx_uart0;
+extern struct pmx_dev pmx_timer_3_4;
+extern struct pmx_dev pmx_timer_1_2;
+
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+/* padmux plgpio devices */
+extern struct pmx_dev pmx_plgpio_0_1;
+extern struct pmx_dev pmx_plgpio_2_3;
+extern struct pmx_dev pmx_plgpio_4_5;
+extern struct pmx_dev pmx_plgpio_6_9;
+extern struct pmx_dev pmx_plgpio_10_27;
+extern struct pmx_dev pmx_plgpio_28;
+extern struct pmx_dev pmx_plgpio_29;
+extern struct pmx_dev pmx_plgpio_30;
+extern struct pmx_dev pmx_plgpio_31;
+extern struct pmx_dev pmx_plgpio_32;
+extern struct pmx_dev pmx_plgpio_33;
+extern struct pmx_dev pmx_plgpio_34_36;
+extern struct pmx_dev pmx_plgpio_37_42;
+extern struct pmx_dev pmx_plgpio_43_44_47_48;
+extern struct pmx_dev pmx_plgpio_45_46_49_50;
+#endif
+
+extern struct pmx_driver pmx_driver;
+
+/* spear300 declarations */
 #ifdef CONFIG_MACH_SPEAR300
+/* Add spear300 machine device structure declarations here */
 extern struct amba_device gpio1_device;
+
+/* pad mux modes */
+extern struct pmx_mode nand_mode;
+extern struct pmx_mode nor_mode;
+extern struct pmx_mode photo_frame_mode;
+extern struct pmx_mode lend_ip_phone_mode;
+extern struct pmx_mode hend_ip_phone_mode;
+extern struct pmx_mode lend_wifi_phone_mode;
+extern struct pmx_mode hend_wifi_phone_mode;
+extern struct pmx_mode ata_pabx_wi2s_mode;
+extern struct pmx_mode ata_pabx_i2s_mode;
+extern struct pmx_mode caml_lcdw_mode;
+extern struct pmx_mode camu_lcd_mode;
+extern struct pmx_mode camu_wlcd_mode;
+extern struct pmx_mode caml_lcd_mode;
+
+/* pad mux devices */
+extern struct pmx_dev pmx_fsmc_2_chips;
+extern struct pmx_dev pmx_fsmc_4_chips;
+extern struct pmx_dev pmx_keyboard;
+extern struct pmx_dev pmx_clcd;
+extern struct pmx_dev pmx_telecom_gpio;
+extern struct pmx_dev pmx_telecom_tdm;
+extern struct pmx_dev pmx_telecom_spi_cs_i2c_clk;
+extern struct pmx_dev pmx_telecom_camera;
+extern struct pmx_dev pmx_telecom_dac;
+extern struct pmx_dev pmx_telecom_i2s;
+extern struct pmx_dev pmx_telecom_boot_pins;
+extern struct pmx_dev pmx_telecom_sdio_4bit;
+extern struct pmx_dev pmx_telecom_sdio_8bit;
+extern struct pmx_dev pmx_gpio1;
+
+void spear300_pmx_init(void);
+
+/* Add spear300 machine function declarations here */
+void __init spear300_init(void);
+
 #endif /* CONFIG_MACH_SPEAR300 */
 
-/* Add spear310 machine device structure declarations here */
+/* spear310 declarations */
 #ifdef CONFIG_MACH_SPEAR310
+/* Add spear310 machine device structure declarations here */
+
+/* pad mux devices */
+extern struct pmx_dev pmx_emi_cs_0_1_4_5;
+extern struct pmx_dev pmx_emi_cs_2_3;
+extern struct pmx_dev pmx_uart1;
+extern struct pmx_dev pmx_uart2;
+extern struct pmx_dev pmx_uart3_4_5;
+extern struct pmx_dev pmx_fsmc;
+extern struct pmx_dev pmx_rs485_0_1;
+extern struct pmx_dev pmx_tdm0;
+
+void spear310_pmx_init(void);
+
+/* Add spear310 machine function declarations here */
+void __init spear310_init(void);
+
 #endif /* CONFIG_MACH_SPEAR310 */
 
-/* Add spear320 machine device structure declarations here */
+/* spear320 declarations */
 #ifdef CONFIG_MACH_SPEAR320
+/* Add spear320 machine device structure declarations here */
+
+/* pad mux modes */
+extern struct pmx_mode auto_net_smii_mode;
+extern struct pmx_mode auto_net_mii_mode;
+extern struct pmx_mode auto_exp_mode;
+extern struct pmx_mode small_printers_mode;
+
+/* pad mux devices */
+extern struct pmx_dev pmx_clcd;
+extern struct pmx_dev pmx_emi;
+extern struct pmx_dev pmx_fsmc;
+extern struct pmx_dev pmx_spp;
+extern struct pmx_dev pmx_sdio;
+extern struct pmx_dev pmx_i2s;
+extern struct pmx_dev pmx_uart1;
+extern struct pmx_dev pmx_uart1_modem;
+extern struct pmx_dev pmx_uart2;
+extern struct pmx_dev pmx_touchscreen;
+extern struct pmx_dev pmx_can;
+extern struct pmx_dev pmx_sdio_led;
+extern struct pmx_dev pmx_pwm0;
+extern struct pmx_dev pmx_pwm1;
+extern struct pmx_dev pmx_pwm2;
+extern struct pmx_dev pmx_pwm3;
+extern struct pmx_dev pmx_ssp1;
+extern struct pmx_dev pmx_ssp2;
+extern struct pmx_dev pmx_mii1;
+extern struct pmx_dev pmx_smii0;
+extern struct pmx_dev pmx_smii1;
+extern struct pmx_dev pmx_i2c1;
+
+void spear320_pmx_init(void);
+
+/* Add spear320 machine function declarations here */
+void __init spear320_init(void);
+
 #endif /* CONFIG_MACH_SPEAR320 */
 
 #endif /* __MACH_GENERIC_H */

372 lines not on this page · raw message

index 1272a38..bb21db1 100644
@@ -16,6 +16,22 @@
 #include <mach/generic.h>
 #include <mach/spear.h>
 
+/* padmux devices to enable */
+static struct pmx_dev *pmx_devs[] = {
+	/* spear3xx specific devices */
+	&pmx_i2c,
+	&pmx_ssp_cs,
+	&pmx_ssp,
+	&pmx_mii,
+	&pmx_uart0,
+
+	/* spear300 specific devices */
+	&pmx_fsmc_2_chips,
+	&pmx_clcd,
+	&pmx_telecom_sdio_4bit,
+	&pmx_gpio1,
+};
+
 static struct amba_device *amba_devs[] __initdata = {
 	/* spear3xx specific devices */
 	&gpio_device,

@@ -38,6 +54,12 @@ static void __init spear300_evb_init(void)
 	/* call spear300 machine init function */
 	spear300_init();
 
+	/* padmux initialization */
+	pmx_driver.mode = &photo_frame_mode;
+	pmx_driver.devs = pmx_devs;
+	pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
+	spear300_pmx_init();
+
 	/* Add Platform Devices */
 	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
 

139 lines not on this page · raw message

index e781b2b..7facf66 100644
@@ -16,6 +16,30 @@
 #include <mach/generic.h>
 #include <mach/spear.h>
 
+/* padmux devices to enable */
+static struct pmx_dev *pmx_devs[] = {
+	/* spear3xx specific devices */
+	&pmx_i2c,
+	&pmx_ssp,
+	&pmx_gpio_pin0,
+	&pmx_gpio_pin1,
+	&pmx_gpio_pin2,
+	&pmx_gpio_pin3,
+	&pmx_gpio_pin4,
+	&pmx_gpio_pin5,
+	&pmx_uart0,
+
+	/* spear310 specific devices */
+	&pmx_emi_cs_0_1_4_5,
+	&pmx_emi_cs_2_3,
+	&pmx_uart1,
+	&pmx_uart2,
+	&pmx_uart3_4_5,
+	&pmx_fsmc,
+	&pmx_rs485_0_1,
+	&pmx_tdm0,
+};
+
 static struct amba_device *amba_devs[] __initdata = {
 	/* spear3xx specific devices */
 	&gpio_device,

@@ -37,6 +61,12 @@ static void __init spear310_evb_init(void)
 	/* call spear310 machine init function */
 	spear310_init();
 
+	/* padmux initialization */
+	pmx_driver.mode = NULL;
+	pmx_driver.devs = pmx_devs;
+	pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
+	spear310_pmx_init();
+
 	/* Add Platform Devices */
 	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
 

384 lines not on this page · raw message

index 85bc4d2..62ac685 100644
@@ -16,6 +16,27 @@
 #include <mach/generic.h>
 #include <mach/spear.h>
 
+/* padmux devices to enable */
+static struct pmx_dev *pmx_devs[] = {
+	/* spear3xx specific devices */
+	&pmx_i2c,
+	&pmx_ssp,
+	&pmx_mii,
+	&pmx_uart0,
+
+	/* spear320 specific devices */
+	&pmx_fsmc,
+	&pmx_sdio,
+	&pmx_i2s,
+	&pmx_uart1,
+	&pmx_uart2,
+	&pmx_can,
+	&pmx_pwm0,
+	&pmx_pwm1,
+	&pmx_pwm2,
+	&pmx_mii1,
+};
+
 static struct amba_device *amba_devs[] __initdata = {
 	/* spear3xx specific devices */
 	&gpio_device,

@@ -37,6 +58,12 @@ static void __init spear320_evb_init(void)
 	/* call spear320 machine init function */
 	spear320_init();
 
+	/* padmux initialization */
+	pmx_driver.mode = &auto_net_mii_mode;
+	pmx_driver.devs = pmx_devs;
+	pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
+	spear320_pmx_init();
+
 	/* Add Platform Devices */
 	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
 

450 lines not on this page · raw message

92 lines not on this page · raw message

164 lines not on this page · raw message