'Comming of Age'

new file mode 100644
index 0000000..1e16b7d
@@ -0,0 +1,14 @@
+#ifndef _ASM_ARM_UNALIGNED_H
+#define _ASM_ARM_UNALIGNED_H
+
+/*
+ * The x86 can do unaligned accesses itself.
+ */
+
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned __get_unaligned_le
+#define put_unaligned __put_unaligned_le
+
+#endif /* _ASM_ARM_UNALIGNED_H */

index f3b6348..af81cd5 100644
@@ -280,8 +280,10 @@ void board_init_r(gd_t *id, ulong ram_start)
 	show_boot_progress(0x26);
 
 
+#ifdef CONFIG_CMD_NET
 	/* IP Address */
 	bd_data.bi_ip_addr = getenv_IPaddr ("ipaddr");
+#endif
 
 #if defined(CONFIG_PCI)
 	/*

index 6d0b15a..f794beb 100644
@@ -46,7 +46,7 @@ unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN;
 void init_sc520_enet (void)
 {
 	/* Set CPU Speed to 100MHz */
-	sc520_mmcr->cpuctl = 0x01;
+	writeb(0x01, &sc520_mmcr->cpuctl);
 
 	/* wait at least one millisecond */
 	asm("movl	$0x2000,%%ecx\n"

@@ -55,7 +55,7 @@ void init_sc520_enet (void)
 	    "loop 0b\n": : : "ecx");
 
 	/* turn on the SDRAM write buffer */
-	sc520_mmcr->dbctl = 0x11;
+	writeb(0x11, &sc520_mmcr->dbctl);
 
 	/* turn on the cache and disable write through */
 	asm("movl	%%cr0, %%eax\n"

@@ -70,51 +70,51 @@ int board_early_init_f(void)
 {
 	init_sc520_enet();
 
-	sc520_mmcr->gpcsrt = 0x01;		/* GP Chip Select Recovery Time */
-	sc520_mmcr->gpcspw = 0x07;		/* GP Chip Select Pulse Width */
-	sc520_mmcr->gpcsoff = 0x00;		/* GP Chip Select Offset */
-	sc520_mmcr->gprdw = 0x05;		/* GP Read pulse width */
-	sc520_mmcr->gprdoff = 0x01;		/* GP Read offset */
-	sc520_mmcr->gpwrw = 0x05;		/* GP Write pulse width */
-	sc520_mmcr->gpwroff = 0x01;		/* GP Write offset */
-
-	sc520_mmcr->piodata15_0 = 0x0630;	/* PIO15_PIO0 Data */
-	sc520_mmcr->piodata31_16 = 0x2000;	/* PIO31_PIO16 Data */
-	sc520_mmcr->piodir31_16 = 0x2000;	/* GPIO Direction */
-	sc520_mmcr->piodir15_0 = 0x87b5;	/* GPIO Direction */
-	sc520_mmcr->piopfs31_16 = 0x0dfe;	/* GPIO pin function 31-16 reg */
-	sc520_mmcr->piopfs15_0 = 0x200a;	/* GPIO pin function 15-0 reg */
-	sc520_mmcr->cspfs = 0x00f8;		/* Chip Select Pin Function Select */
-
-	sc520_mmcr->par[2] = 0x200713f8;	/* Uart A (GPCS0, 0x013f8, 8 Bytes) */
-	sc520_mmcr->par[3] = 0x2c0712f8;	/* Uart B (GPCS3, 0x012f8, 8 Bytes) */
-	sc520_mmcr->par[4] = 0x300711f8;	/* Uart C (GPCS4, 0x011f8, 8 Bytes) */
-	sc520_mmcr->par[5] = 0x340710f8;	/* Uart D (GPCS5, 0x010f8, 8 Bytes) */
-	sc520_mmcr->par[6] =  0xe3ffc000;	/* SDRAM (0x00000000, 128MB) */
-	sc520_mmcr->par[7] = 0xaa3fd000;	/* StrataFlash (ROMCS1, 0x10000000, 16MB) */
-	sc520_mmcr->par[8] = 0xca3fd100;	/* StrataFlash (ROMCS2, 0x11000000, 16MB) */
-	sc520_mmcr->par[9] = 0x4203d900;	/* SRAM (GPCS0, 0x19000000, 1MB) */
-	sc520_mmcr->par[10] = 0x4e03d910;	/* SRAM (GPCS3, 0x19100000, 1MB) */
-	sc520_mmcr->par[11] = 0x50018100;	/* DP-RAM (GPCS4, 0x18100000, 4kB) */
-	sc520_mmcr->par[12] = 0x54020000;	/* CFLASH1 (0x200000000, 4kB) */
-	sc520_mmcr->par[13] = 0x5c020001;	/* CFLASH2 (0x200010000, 4kB) */
-/*	sc520_mmcr->par14 = 0x8bfff800; */	/* BOOTCS at  0x18000000 */
-/*	sc520_mmcr->par15 = 0x38201000; */	/* LEDs etc (GPCS6, 0x1000, 20 Bytes */
+	writeb(0x01, &sc520_mmcr->gpcsrt);		/* GP Chip Select Recovery Time */
+	writeb(0x07, &sc520_mmcr->gpcspw);		/* GP Chip Select Pulse Width */
+	writeb(0x00, &sc520_mmcr->gpcsoff);		/* GP Chip Select Offset */
+	writeb(0x05, &sc520_mmcr->gprdw);		/* GP Read pulse width */
+	writeb(0x01, &sc520_mmcr->gprdoff);		/* GP Read offset */
+	writeb(0x05, &sc520_mmcr->gpwrw);		/* GP Write pulse width */
+	writeb(0x01, &sc520_mmcr->gpwroff);		/* GP Write offset */
+
+	writew(0x0630, &sc520_mmcr->piodata15_0);	/* PIO15_PIO0 Data */
+	writew(0x2000, &sc520_mmcr->piodata31_16);	/* PIO31_PIO16 Data */
+	writew(0x2000, &sc520_mmcr->piodir31_16);	/* GPIO Direction */
+	writew(0x87b5, &sc520_mmcr->piodir15_0);	/* GPIO Direction */
+	writew(0x0dfe, &sc520_mmcr->piopfs31_16);	/* GPIO pin function 31-16 reg */
+	writew(0x200a, &sc520_mmcr->piopfs15_0);	/* GPIO pin function 15-0 reg */
+	writeb(0xf8, &sc520_mmcr->cspfs);		/* Chip Select Pin Function Select */
+
+	writel(0x200713f8, &sc520_mmcr->par[2]);	/* Uart A (GPCS0, 0x013f8, 8 Bytes) */
+	writel(0x2c0712f8, &sc520_mmcr->par[3]);	/* Uart B (GPCS3, 0x012f8, 8 Bytes) */
+	writel(0x300711f8, &sc520_mmcr->par[4]);	/* Uart C (GPCS4, 0x011f8, 8 Bytes) */
+	writel(0x340710f8, &sc520_mmcr->par[5]);	/* Uart D (GPCS5, 0x010f8, 8 Bytes) */
+	writel(0xe3ffc000, &sc520_mmcr->par[6]);	/* SDRAM (0x00000000, 128MB) */
+	writel(0xaa3fd000, &sc520_mmcr->par[7]);	/* StrataFlash (ROMCS1, 0x10000000, 16MB) */
+	writel(0xca3fd100, &sc520_mmcr->par[8]);	/* StrataFlash (ROMCS2, 0x11000000, 16MB) */
+	writel(0x4203d900, &sc520_mmcr->par[9]);	/* SRAM (GPCS0, 0x19000000, 1MB) */
+	writel(0x4e03d910, &sc520_mmcr->par[10]);	/* SRAM (GPCS3, 0x19100000, 1MB) */
+	writel(0x50018100, &sc520_mmcr->par[11]);	/* DP-RAM (GPCS4, 0x18100000, 4kB) */
+	writel(0x54020000, &sc520_mmcr->par[12]);	/* CFLASH1 (0x200000000, 4kB) */
+	writel(0x5c020001, &sc520_mmcr->par[13]);	/* CFLASH2 (0x200010000, 4kB) */
+/*	writel(0x8bfff800, &sc520_mmcr->par14); */	/* BOOTCS at  0x18000000 */
+/*	writel(0x38201000, &sc520_mmcr->par15); */	/* LEDs etc (GPCS6, 0x1000, 20 Bytes */
 
 	/* Disable Watchdog */
-	sc520_mmcr->wdtmrctl = 0x3333;
-	sc520_mmcr->wdtmrctl = 0xcccc;
-	sc520_mmcr->wdtmrctl = 0x0000;
+	writew(0x3333, &sc520_mmcr->wdtmrctl);
+	writew(0xcccc, &sc520_mmcr->wdtmrctl);
+	writew(0x0000, &sc520_mmcr->wdtmrctl);
 
 	/* Chip Select Configuration */
-	sc520_mmcr->bootcsctl = 0x0033;
-	sc520_mmcr->romcs1ctl = 0x0615;
-	sc520_mmcr->romcs2ctl = 0x0615;
-
-	sc520_mmcr->adddecctl = 0x02;
-	sc520_mmcr->uart1ctl = 0x07;
-	sc520_mmcr->sysarbctl = 0x06;
-	sc520_mmcr->sysarbmenb = 0x0003;
+	writew(0x0033, &sc520_mmcr->bootcsctl);
+	writew(0x0615, &sc520_mmcr->romcs1ctl);
+	writew(0x0615, &sc520_mmcr->romcs2ctl);
+
+	writeb(0x02, &sc520_mmcr->adddecctl);
+	writeb(0x07, &sc520_mmcr->uart1ctl);
+	writeb(0x06, &sc520_mmcr->sysarbctl);
+	writew(0x0003, &sc520_mmcr->sysarbmenb);
 
 	return 0;
 }

index 4b566a7..519bfd8 100644
@@ -44,24 +44,24 @@ void init_sc520(void)
 	/* Set the UARTxCTL register at it's slower,
 	 * baud clock giving us a 1.8432 MHz reference
 	 */
-	sc520_mmcr->uart1ctl = 0x07;
-	sc520_mmcr->uart2ctl = 0x07;
+	writeb(0x07, &sc520_mmcr->uart1ctl);
+	writeb(0x07, &sc520_mmcr->uart2ctl);
 
 	/* first set the timer pin mapping */
-	sc520_mmcr->clksel = 0x72;	/* no clock frequency selected, use 1.1892MHz */
+	writeb(0x72, &sc520_mmcr->clksel);	/* no clock frequency selected, use 1.1892MHz */
 
 	/* enable PCI bus arbitrer */
-	sc520_mmcr->sysarbctl = 0x02;	/* enable concurrent mode */
+	writeb(0x02, &sc520_mmcr->sysarbctl);	/* enable concurrent mode */
 
-	sc520_mmcr->sysarbmenb = 0x1f;	/* enable external grants */
-	sc520_mmcr->hbctl = 0x04;	/* enable posted-writes */
+	writeb(0x1f, &sc520_mmcr->sysarbmenb);	/* enable external grants */
+	writeb(0x04, &sc520_mmcr->hbctl);	/* enable posted-writes */
 
 	if (CONFIG_SYS_SC520_HIGH_SPEED) {
-		sc520_mmcr->cpuctl = 0x02;	/* set it to 133 MHz and write back */
+		writeb(0x02, &sc520_mmcr->cpuctl);	/* set it to 133 MHz and write back */
 		gd->cpu_clk = 133000000;
 		printf("## CPU Speed set to 133MHz\n");
 	} else {
-		sc520_mmcr->cpuctl = 0x01;	/* set it to 100 MHz and write back */
+		writeb(0x01, &sc520_mmcr->cpuctl);	/* set it to 100 MHz and write back */
 		printf("## CPU Speed set to 100MHz\n");
 		gd->cpu_clk = 100000000;
 	}

@@ -74,7 +74,7 @@ void init_sc520(void)
 	    "loop 0b\n": : : "ecx");
 
 	/* turn on the SDRAM write buffer */
-	sc520_mmcr->dbctl = 0x11;
+	writeb(0x11, &sc520_mmcr->dbctl);
 
 	/* turn on the cache and disable write through */
 	asm("movl	%%cr0, %%eax\n"

@@ -88,6 +88,7 @@ unsigned long init_sc520_dram(void)
 
 	u32 dram_present=0;
 	u32 dram_ctrl;
+
 #ifdef CONFIG_SYS_SDRAM_DRCTMCTL
 	/* these memory control registers are set up in the assember part,
 	 * in sc520_asm.S, during 'mem_init'.  If we muck with them here,

@@ -97,7 +98,8 @@ unsigned long init_sc520_dram(void)
 	 * simply dictates it.
 	 */
 #else
-	int val;
+	u8 tmp;
+	u8 val;
 
 	int cas_precharge_delay = CONFIG_SYS_SDRAM_PRECHARGE_DELAY;
 	int refresh_rate        = CONFIG_SYS_SDRAM_REFRESH_RATE;

@@ -116,9 +118,10 @@ unsigned long init_sc520_dram(void)
 		val = 3;  /* 62.4us */
 	}
 
-	sc520_mmcr->drcctl = (sc520_mmcr->drcctl & 0xcf) | (val<<4);
+	tmp = (readb(&sc520_mmcr->drcctl) & 0xcf) | (val<<4);
+	writeb(tmp, &sc520_mmcr->drcctl);
 
-	val = sc520_mmcr->drctmctl & 0xf0;
+	val = readb(&sc520_mmcr->drctmctl) & 0xf0;
 
 	if (cas_precharge_delay==3) {
 		val |= 0x04;   /* 3T */

@@ -133,12 +136,12 @@ unsigned long init_sc520_dram(void)
 	} else {
 		val |= 1;
 	}
-	sc520_mmcr->drctmctl = val;
+	writeb(val, &c520_mmcr->drctmctl);
 #endif
 
 	/* We read-back the configuration of the dram
 	 * controller that the assembly code wrote */
-	dram_ctrl = sc520_mmcr->drcbendadr;
+	dram_ctrl = readl(&sc520_mmcr->drcbendadr);
 
 	bd->bi_dram[0].start = 0;
 	if (dram_ctrl & 0x80) {

@@ -191,7 +194,7 @@ void reset_cpu(ulong addr)
 {
 	printf("Resetting using SC520 MMCR\n");
 	/* Write a '1' to the SYS_RST of the RESCFG MMCR */
-	sc520_mmcr->rescfg = 0x01;
+	writeb(0x01, &sc520_mmcr->rescfg);
 
 	/* NOTREACHED */
 }

index f446c6d..ee7e720 100644
@@ -25,6 +25,7 @@
 
 #include <common.h>
 #include <pci.h>
+#include <asm/io.h>
 #include <asm/pci.h>
 #include <asm/ic/sc520.h>
 

@@ -63,6 +64,8 @@ int sc520_pci_ints[15] = {
 int pci_sc520_set_irq(int pci_pin, int irq)
 {
 	int i;
+	u8 tmpb;
+	u16 tmpw;
 
 # if 1
 	printf("set_irq(): map INT%c to IRQ%d\n", pci_pin + 'A', irq);

@@ -80,31 +83,34 @@ int pci_sc520_set_irq(int pci_pin, int irq)
 
 	/* PCI interrupt mapping (A through D)*/
 	for (i=0; i<=3 ;i++) {
-		if (sc520_mmcr->pci_int_map[i] == sc520_irq[irq].priority)
-			sc520_mmcr->pci_int_map[i] = SC520_IRQ_DISABLED;
+		if (readb(&sc520_mmcr->pci_int_map[i]) == sc520_irq[irq].priority)
+			writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pci_int_map[i]);
 	}
 
 	/* GP IRQ interrupt mapping */
 	for (i=0; i<=10 ;i++) {
-		if (sc520_mmcr->gp_int_map[i] == sc520_irq[irq].priority)
-			sc520_mmcr->gp_int_map[i] = SC520_IRQ_DISABLED;
+		if (readb(&sc520_mmcr->gp_int_map[i]) == sc520_irq[irq].priority)
+			writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_int_map[i]);
 	}
 
 	/* Set the trigger to level */
-	sc520_mmcr->pic_mode[sc520_irq[irq].level_reg] =
-		sc520_mmcr->pic_mode[sc520_irq[irq].level_reg] | sc520_irq[irq].level_bit;
+	tmpb = readb(&sc520_mmcr->pic_mode[sc520_irq[irq].level_reg]);
+	tmpb |= sc520_irq[irq].level_bit;
+	writeb(tmpb, &sc520_mmcr->pic_mode[sc520_irq[irq].level_reg]);
 
 
 	if (pci_pin < 4) {
 		/* PCI INTA-INTD */
 		/* route the interrupt */
-		sc520_mmcr->pci_int_map[pci_pin] = sc520_irq[irq].priority;
+		writeb(sc520_irq[irq].priority, &sc520_mmcr->pci_int_map[pci_pin]);
 	} else {
 		/* GPIRQ0-GPIRQ10 used for additional PCI INTS */
-		sc520_mmcr->gp_int_map[pci_pin - 4] = sc520_irq[irq].priority;
+		writeb(sc520_irq[irq].priority, &sc520_mmcr->gp_int_map[pci_pin - 4]);
 
 		/* also set the polarity in this case */
-		sc520_mmcr->intpinpol = sc520_mmcr->intpinpol | (1 << (pci_pin-4));
+		tmpw = readw(&sc520_mmcr->intpinpol);
+		tmpw |= (1 << (pci_pin-4));
+		writew(tmpw, &sc520_mmcr->intpinpol);
 	}
 
 	/* register the pin */

index 8dbe17a..6e5e346 100644
@@ -24,6 +24,7 @@
 /* stuff specific for the sc520, but independent of implementation */
 
 #include <common.h>
+#include <asm/io.h>
 #include <asm/ic/ssi.h>
 #include <asm/ic/sc520.h>
 

@@ -61,34 +62,34 @@ int ssi_set_interface(int freq, int lsb_first, int inv_clock, int inv_phase)
 		temp |= PHS_INV_ENB;
 	}
 
-	sc520_mmcr->ssictl = temp;
+	writeb(temp, &sc520_mmcr->ssictl);
 
 	return 0;
 }
 
 u8 ssi_txrx_byte(u8 data)
 {
-	sc520_mmcr->ssixmit = data;
-	while (sc520_mmcr->ssista & SSISTA_BSY);
-	sc520_mmcr->ssicmd = SSICMD_CMD_SEL_XMITRCV;
-	while (sc520_mmcr->ssista & SSISTA_BSY);
+	writeb(data, &sc520_mmcr->ssixmit);
+	while (readb(&sc520_mmcr->ssista) & SSISTA_BSY);
+	writeb(SSICMD_CMD_SEL_XMITRCV, &sc520_mmcr->ssicmd);
+	while (readb(&sc520_mmcr->ssista) & SSISTA_BSY);
 
-	return sc520_mmcr->ssircv;
+	return readb(&sc520_mmcr->ssircv);
 }
 
 
 void ssi_tx_byte(u8 data)
 {
-	sc520_mmcr->ssixmit = data;
-	while (sc520_mmcr->ssista & SSISTA_BSY);
-	sc520_mmcr->ssicmd = SSICMD_CMD_SEL_XMIT;
+	writeb(data, &sc520_mmcr->ssixmit);
+	while (readb(&sc520_mmcr->ssista) & SSISTA_BSY);
+	writeb(SSICMD_CMD_SEL_XMIT, &sc520_mmcr->ssicmd);
 }
 
 u8 ssi_rx_byte(void)
 {
-	while (sc520_mmcr->ssista & SSISTA_BSY);
-	sc520_mmcr->ssicmd = SSICMD_CMD_SEL_RCV;
-	while (sc520_mmcr->ssista & SSISTA_BSY);
+	while (readb(&sc520_mmcr->ssista) & SSISTA_BSY);
+	writeb(SSICMD_CMD_SEL_RCV, &sc520_mmcr->ssicmd);
+	while (readb(&sc520_mmcr->ssista) & SSISTA_BSY);
 
-	return sc520_mmcr->ssircv;
+	return readb(&sc520_mmcr->ssircv);
 }

index 93b5b55..eca48e0 100644
@@ -24,13 +24,14 @@
 /* stuff specific for the sc520, but independent of implementation */
 
 #include <common.h>
+#include <asm/io.h>
 #include <asm/interrupt.h>
 #include <asm/ic/sc520.h>
 
 void sc520_timer_isr(void)
 {
 	/* Ack the GP Timer Interrupt */
-	sc520_mmcr->gptmrsta = 0x02;
+	writeb(0x02, &sc520_mmcr->gptmrsta);
 }
 
 int timer_init(void)

@@ -42,28 +43,28 @@ int timer_init(void)
 	irq_install_handler (0, timer_isr, NULL);
 
 	/* Map GP Timer 1 to Master PIC IR0  */
-	sc520_mmcr->gp_tmr_int_map[1] = 0x01;
+	writeb(0x01, &sc520_mmcr->gp_tmr_int_map[1]);
 
 	/* Disable GP Timers 1 & 2 - Allow configuration writes */
-	sc520_mmcr->gptmr1ctl = 0x4000;
-	sc520_mmcr->gptmr2ctl = 0x4000;
+	writew(0x4000, &sc520_mmcr->gptmr1ctl);
+	writew(0x4000, &sc520_mmcr->gptmr2ctl);
 
 	/* Reset GP Timers 1 & 2 */
-	sc520_mmcr->gptmr1cnt = 0x0000;
-	sc520_mmcr->gptmr2cnt = 0x0000;
+	writew(0x0000, &sc520_mmcr->gptmr1cnt);
+	writew(0x0000, &sc520_mmcr->gptmr2cnt);
 
 	/* Setup GP Timer 2 as a 100kHz (10us) prescaler */
-	sc520_mmcr->gptmr2maxcmpa = 83;
-	sc520_mmcr->gptmr2ctl = 0xc001;
+	writew(83, &sc520_mmcr->gptmr2maxcmpa);
+	writew(0xc001, &sc520_mmcr->gptmr2ctl);
 
 	/* Setup GP Timer 1 as a 1000 Hz (1ms) interrupt generator */
-	sc520_mmcr->gptmr1maxcmpa = 100;
-	sc520_mmcr->gptmr1ctl = 0xe009;
+	writew(100, &sc520_mmcr->gptmr1maxcmpa);
+	writew(0xe009, &sc520_mmcr->gptmr1ctl);
 
 	unmask_irq (0);
 
 	/* Clear the GP Timer 1 status register to get the show rolling*/
-	sc520_mmcr->gptmrsta = 0x02;
+	writeb(0x02, &sc520_mmcr->gptmrsta);
 
 	return 0;
 }

@@ -74,11 +75,11 @@ void __udelay(unsigned long usec)
 	long u;
 	long temp;
 
-	temp = sc520_mmcr->swtmrmilli;
-	temp = sc520_mmcr->swtmrmicro;
+	temp = readw(&sc520_mmcr->swtmrmilli);
+	temp = readw(&sc520_mmcr->swtmrmicro);
 
 	do {
-		m += sc520_mmcr->swtmrmilli;
-		u = sc520_mmcr->swtmrmicro + (m * 1000);
+		m += readw(&sc520_mmcr->swtmrmilli);
+		u = readw(&sc520_mmcr->swtmrmicro) + (m * 1000);
 	} while (u < usec);
 }

index 4b57437..2eae5be 100644
@@ -5,6 +5,9 @@
  * (C) Copyright 2002
  * Daniel Engstr?m, Omicron Ceti AB, daniel at omicron.se.
  *
+ * Portions of this file are derived from the Linux kernel source
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *

@@ -32,12 +35,112 @@
 	".hidden irq_"#x"\n" \
 	".type irq_"#x", @function\n" \
 	"irq_"#x":\n" \
-	"pushl %ebp\n" \
-	"movl %esp,%ebp\n" \
-	"pusha\n" \
 	"pushl $"#x"\n" \
 	"jmp irq_common_entry\n"
 
+/*
+ * Volatile isn't enough to prevent the compiler from reordering the
+ * read/write functions for the control registers and messing everything up.
+ * A memory clobber would solve the problem, but would prevent reordering of
+ * all loads stores around it, which can hurt performance. Solution is to
+ * use a variable and mimic reads and writes to it to enforce serialization
+ */
+static unsigned long __force_order;
+
+static inline unsigned long read_cr0(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr0,%0\n\t" : "=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline unsigned long read_cr2(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr2,%0\n\t" : "=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline unsigned long read_cr3(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr3,%0\n\t" : "=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline unsigned long read_cr4(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline unsigned long get_debugreg(int regno)
+{
+	unsigned long val = 0;	/* Damn you, gcc! */
+
+	switch (regno) {
+	case 0:
+		asm("mov %%db0, %0" :"=r" (val));
+		break;
+	case 1:
+		asm("mov %%db1, %0" :"=r" (val));
+		break;
+	case 2:
+		asm("mov %%db2, %0" :"=r" (val));
+		break;
+	case 3:
+		asm("mov %%db3, %0" :"=r" (val));
+		break;
+	case 6:
+		asm("mov %%db6, %0" :"=r" (val));
+		break;
+	case 7:
+		asm("mov %%db7, %0" :"=r" (val));
+		break;
+	default:
+		val = 0;
+	}
+	return val;
+}
+
+void dump_regs(struct pt_regs *regs)
+{
+	unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
+	unsigned long d0, d1, d2, d3, d6, d7;
+
+	printf("EIP: %04x:[<%08lx>] EFLAGS: %08lx\n",
+			(u16)regs->xcs, regs->eip, regs->eflags);
+
+	printf("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
+		regs->eax, regs->ebx, regs->ecx, regs->edx);
+	printf("ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n",
+		regs->esi, regs->edi, regs->ebp, regs->esp);
+	printf(" DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x\n",
+	       (u16)regs->xds, (u16)regs->xes, (u16)regs->xfs, (u16)regs->xgs, (u16)regs->xss);
+
+	cr0 = read_cr0();
+	cr2 = read_cr2();
+	cr3 = read_cr3();
+	cr4 = read_cr4();
+
+	printf("CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n",
+			cr0, cr2, cr3, cr4);
+
+	d0 = get_debugreg(0);
+	d1 = get_debugreg(1);
+	d2 = get_debugreg(2);
+	d3 = get_debugreg(3);
+
+	printf("DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n",
+			d0, d1, d2, d3);
+
+	d6 = get_debugreg(6);
+	d7 = get_debugreg(7);
+	printf("DR6: %08lx DR7: %08lx\n",
+			d6, d7);
+}
+
 struct idt_entry {
 	u16	base_low;
 	u16	selector;

@@ -122,7 +225,7 @@ int disable_interrupts(void)
 }
 
 /* IRQ Low-Level Service Routine */
-__isr__ irq_llsr(int ip, int seg, int irq)
+__isr__ irq_llsr(struct pt_regs *regs)
 {
 	/*
 	 * For detailed description of each exception, refer to:

@@ -131,74 +234,93 @@ __isr__ irq_llsr(int ip, int seg, int irq)
 	 * Order Number: 253665-029US, November 2008
 	 * Table 6-1. Exceptions and Interrupts
 	 */
-	switch (irq) {
-	case 0x00:
-		printf("Divide Error (Division by zero) at %04x:%08x\n", seg, ip);
-		while(1);
-		break;
-	case 0x01:
-		printf("Debug Interrupt (Single step) at %04x:%08x\n", seg, ip);
-		break;
-	case 0x02:
-		printf("NMI Interrupt at %04x:%08x\n", seg, ip);
-		break;
-	case 0x03:
-		printf("Breakpoint at %04x:%08x\n", seg, ip);
-		break;
-	case 0x04:
-		printf("Overflow at %04x:%08x\n", seg, ip);
-		while(1);
-		break;
-	case 0x05:
-		printf("BOUND Range Exceeded at %04x:%08x\n", seg, ip);
-		while(1);
-		break;
-	case 0x06:
-		printf("Invalid Opcode (UnDefined Opcode) at %04x:%08x\n", seg, ip);
-		while(1);
-		break;
-	case 0x07:
-		printf("Device Not Available (No Math Coprocessor) at %04x:%08x\n", seg, ip);
-		while(1);
-		break;
-	case 0x08:
-		printf("Double fault at %04x:%08x\n", seg, ip);
-		while(1);
-		break;
-	case 0x09:
-		printf("Co-processor segment overrun at %04x:%08x\n", seg, ip);
-		while(1);
-		break;
-	case 0x0a:
-		printf("Invalid TSS at %04x:%08x\n", seg, ip);
-		break;
-	case 0x0b:
-		printf("Segment Not Present at %04x:%08x\n", seg, ip);
-		while(1);
-		break;
-	case 0x0c:
-		printf("Stack Segment Fault at %04x:%08x\n", seg, ip);
-		while(1);
-		break;
-	case 0x0d:
-		printf("General Protection at %04x:%08x\n", seg, ip);
-		break;
-	case 0x0e:
-		printf("Page fault at %04x:%08x\n", seg, ip);
-		while(1);
-		break;
-	case 0x0f:
-		printf("Floating-Point Error (Math Fault) at %04x:%08x\n", seg, ip);
-		break;
-	case 0x10:
-		printf("Alignment check at %04x:%08x\n", seg, ip);
-		break;
-	case 0x11:
-		printf("Machine Check at %04x:%08x\n", seg, ip);
-		break;
-	case 0x12:
-		printf("SIMD Floating-Point Exception at %04x:%08x\n", seg, ip);
-		break;
+	switch (regs->orig_eax) {
+ 	case 0x00:
+		printf("Divide Error (Division by zero)\n");
+		dump_regs(regs);
+ 		while(1);
+ 		break;
+ 	case 0x01:
+		printf("Debug Interrupt (Single step)\n");
+		dump_regs(regs);
+ 		break;
+ 	case 0x02:
+		printf("NMI Interrupt\n");
+		dump_regs(regs);
+ 		break;
+ 	case 0x03:
+		printf("Breakpoint\n");
+		dump_regs(regs);
+ 		break;
+ 	case 0x04:
+		printf("Overflow\n");
+		dump_regs(regs);
+ 		while(1);
+ 		break;
+ 	case 0x05:
+		printf("BOUND Range Exceeded\n");
+		dump_regs(regs);
+ 		while(1);
+ 		break;
+ 	case 0x06:
+		printf("Invalid Opcode (UnDefined Opcode)\n");
+		dump_regs(regs);
+ 		while(1);
+ 		break;
+ 	case 0x07:
+		printf("Device Not Available (No Math Coprocessor)\n");
+		dump_regs(regs);
+ 		while(1);
+ 		break;
+ 	case 0x08:
+		printf("Double fault\n");
+		dump_regs(regs);
+ 		while(1);
+ 		break;
+ 	case 0x09:
+		printf("Co-processor segment overrun\n");
+		dump_regs(regs);
+ 		while(1);
+ 		break;
+ 	case 0x0a:
+		printf("Invalid TSS\n");
+		dump_regs(regs);
+ 		break;
+ 	case 0x0b:
+		printf("Segment Not Present\n");
+		dump_regs(regs);
+ 		while(1);
+ 		break;
+ 	case 0x0c:
+		printf("Stack Segment Fault\n");
+		dump_regs(regs);
+ 		while(1);
+ 		break;
+ 	case 0x0d:
+		printf("General Protection\n");
+		dump_regs(regs);
+ 		break;
+ 	case 0x0e:
+		printf("Page fault\n");
+		dump_regs(regs);
+ 		while(1);
+ 		break;
+ 	case 0x0f:
+		printf("Floating-Point Error (Math Fault)\n");
+		dump_regs(regs);
+ 		break;
+ 	case 0x10:
+		printf("Alignment check\n");
+		dump_regs(regs);
+ 		break;
+ 	case 0x11:
+		printf("Machine Check\n");
+		dump_regs(regs);
+ 		break;
+ 	case 0x12:
+		printf("SIMD Floating-Point Exception\n");
+		dump_regs(regs);
+ 		break;
 	case 0x13:
 	case 0x14:
 	case 0x15:

@@ -212,12 +334,13 @@ __isr__ irq_llsr(int ip, int seg, int irq)
 	case 0x1d:
 	case 0x1e:
 	case 0x1f:
-		printf("Reserved Exception %d at %04x:%08x\n", irq, seg, ip);
+		printf("Reserved Exception\n");
+		dump_regs(regs);
 		break;
 
 	default:
 		/* Hardware or User IRQ */
-		do_irq(irq);
+		do_irq(regs->orig_eax);
 	}
 }
 

@@ -226,22 +349,45 @@ __isr__ irq_llsr(int ip, int seg, int irq)
  * fully relocatable code.
  *  - The call to irq_llsr will be a relative jump
  *  - The IRQ entries will be guaranteed to be in order
- * It's a bit annoying that we need to waste 3 bytes per interrupt entry
- * (total of 768 code bytes), but we MUST create a Stack Frame and this is
- * the easiest way I could do it. Maybe it can be made better later.
+ *  Interrupt entries are now very small (a push and a jump) but they are
+ *  now slower (all registers pushed on stack which provides complete
+ *  crash dumps in the low level handlers
  */
 asm(".globl irq_common_entry\n" \
 	".hidden irq_common_entry\n" \
 	".type irq_common_entry, @function\n" \
 	"irq_common_entry:\n" \
-	"pushl $0\n" \
-	"pushl $0\n" \
+	"cld\n" \
+	"pushl %gs\n" \
+	"pushl %fs\n" \
+	"pushl %es\n" \
+	"pushl %ds\n" \
+	"pushl %eax\n" \
+	"pushl %ebp\n" \
+	"pushl %edi\n" \
+	"pushl %esi\n" \
+	"pushl %edx\n" \
+	"pushl %ecx\n" \
+	"pushl %ebx\n" \
+	"mov   %esp, %eax\n" \
+	"pushl %ebp\n" \
+	"movl %esp,%ebp\n" \
+	"pushl %eax\n" \
 	"call irq_llsr\n" \
 	"popl %eax\n" \
-	"popl %eax\n" \
-	"popl %eax\n" \
-	"popa\n" \
 	"leave\n"\
+	"popl %ebx\n" \
+	"popl %ecx\n" \
+	"popl %edx\n" \
+	"popl %esi\n" \
+	"popl %edi\n" \
+	"popl %ebp\n" \
+	"popl %eax\n" \
+	"popl %ds\n" \
+	"popl %es\n" \
+	"popl %fs\n" \
+	"popl %gs\n" \
+	"add  $4, %esp\n" \
 	"iret\n" \
 	DECLARE_INTERRUPT(0) \
 	DECLARE_INTERRUPT(1) \

index af81cd5..5e28c6f 100644
@@ -422,10 +422,10 @@ void hang (void)
 unsigned long do_go_exec (ulong (*entry)(int, char *[]), int argc, char *argv[])
 {
 	/*
-	 * TODO: Test this function - changed to fix compiler error.
-	 * Original code was:
-	 *   return (entry >> 1) (argc, argv);
-	 * with a comment about Nios function pointers are address >> 1
+	 * x86 does not use a dedicated register to pass the pointer
+	 * to the global_data
 	 */
+	argv[-1] = (char *)gd;
+
 	return (entry) (argc, argv);
 }

index 5e28c6f..947a8ec 100644
@@ -52,7 +52,9 @@ extern ulong _i386boot_rel_dyn_start;
 extern ulong _i386boot_rel_dyn_end;
 extern ulong _i386boot_bss_start;
 extern ulong _i386boot_bss_size;
-void ram_bootstrap (void *);
+
+void ram_bootstrap (void *, ulong);
+
 const char version_string[] =
 	U_BOOT_VERSION" (" U_BOOT_DATE " - " U_BOOT_TIME ")";
 

@@ -162,6 +164,7 @@ init_fnc_t *init_sequence[] = {
 	NULL,
 };
 
+static gd_t gd_data;
 gd_t *gd;
 
 /*

@@ -174,21 +177,18 @@ void board_init_f (ulong stack_limit)
 	Elf32_Rel *rel_dyn_start = (Elf32_Rel *)&_i386boot_rel_dyn_start;
 	Elf32_Rel *rel_dyn_end = (Elf32_Rel *)&_i386boot_rel_dyn_end;
 	void *bss_start = &_i386boot_bss_start;
-	void *bss_size = &_i386boot_bss_size;
+	ulong bss_size = (ulong)&_i386boot_bss_size;
 
-	size_t uboot_size;
-	void *ram_start;
+	ulong uboot_size;
+	void *dest_addr;
 	ulong rel_offset;
 	Elf32_Rel *re;
 
-	void (*start_func)(void *);
-
-	/* compiler optimization barrier needed for GCC >= 3.4 */
-	__asm__ __volatile__("": : :"memory");
+	void (*start_func)(void *, ulong);
 
-	uboot_size = (size_t)u_boot_cmd_end - (size_t)text_start;
-	ram_start  = (void *)stack_limit - (uboot_size + (ulong)bss_size);
-	rel_offset = text_start - ram_start;
+	uboot_size = (ulong)u_boot_cmd_end - (ulong)text_start;
+	dest_addr  = (void *)stack_limit - (uboot_size + (ulong)bss_size);
+	rel_offset = text_start - dest_addr;
 	start_func = ram_bootstrap - rel_offset;
 
 	/* First stage CPU initialization */

@@ -200,10 +200,10 @@ void board_init_f (ulong stack_limit)
 		hang();
 
 	/* Copy U-Boot into RAM */
-	memcpy(ram_start, text_start, (size_t)uboot_size);
+	memcpy(dest_addr, text_start, uboot_size);
 
 	/* Clear BSS */
-	memset(bss_start - rel_offset,	0, (size_t)bss_size);
+	memset(bss_start - rel_offset,	0, bss_size);
 
 	/* Perform relocation adjustments */
 	for (re = rel_dyn_start; re < rel_dyn_end; re++)

@@ -213,27 +213,39 @@ void board_init_f (ulong stack_limit)
 				*(ulong *)(re->r_offset - rel_offset) -= (Elf32_Addr)rel_offset;
 	}
 
-	start_func(ram_start);
-
-	/* NOTREACHED - relocate_code() does not return */
+	/* Enter the relocated U-Boot! */
+	start_func(dest_addr, rel_offset);
+	/* NOTREACHED - board_init_f() does not return */
 	while(1);
 }
 
 /*
- * All attempts to jump straight from board_init_f() to board_init_r()
- * have failed, hence this special 'bootstrap' function.
+ * We cannot initialize gd_data in board_init_f() because we would be
+ * attempting to write to flash (I have even tried using manual relocation
+ * adjustments on pointers but it just won't work) and board_init_r() does
+ * not have enough arguments to allow us to pass the relocation offset
+ * straight up. This bootstrap function (which runs in RAM) is used to
+ * setup gd_data in order to pass the relocation offset to the rest of
+ * U-Boot.
+ *
+ * TODO: The compiler optimization barrier is intended to stop GCC from
+ * optimizing this function into board_init_f(). It seems to work without
+ * it, but I've left it in to be sure. I think also that the barrier in
+ * board_init_r() is no longer needed, but left it in 'just in case'
  */
-void ram_bootstrap (void *ram_start)
+void ram_bootstrap (void *dest_addr, ulong rel_offset)
 {
-	static gd_t gd_data;
-
 	/* compiler optimization barrier needed for GCC >= 3.4 */
 	__asm__ __volatile__("": : :"memory");
 
-	board_init_r(&gd_data, (ulong)ram_start);
+	/* tell others: relocation done */
+	gd_data.reloc_off = rel_offset;
+	gd_data.flags |= GD_FLG_RELOC;
+
+	board_init_r(&gd_data, (ulong)dest_addr);
 }
 
-void board_init_r(gd_t *id, ulong ram_start)
+void board_init_r(gd_t *id, ulong dest_addr)
 {
 	char *s;
 	int i;

@@ -247,16 +259,13 @@ void board_init_r(gd_t *id, ulong ram_start)
 	/* compiler optimization barrier needed for GCC >= 3.4 */
 	__asm__ __volatile__("": : :"memory");
 
-	memset (gd, 0, sizeof (gd_t));
 	gd->bd = &bd_data;
 	memset (gd->bd, 0, sizeof (bd_t));
 	show_boot_progress(0x22);
 
 	gd->baudrate =  CONFIG_BAUDRATE;
 
-	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
-
-	mem_malloc_init((((ulong)ram_start - CONFIG_SYS_MALLOC_LEN)+3)&~3,
+	mem_malloc_init((((ulong)dest_addr - CONFIG_SYS_MALLOC_LEN)+3)&~3,
 			CONFIG_SYS_MALLOC_LEN);
 
 	for (init_fnc_ptr = init_sequence, i=0; *init_fnc_ptr; ++init_fnc_ptr, i++) {

index 6491e52..a92b77e 100644
@@ -141,7 +141,7 @@ static void setvector(int vector, u16 segment, void *handler)
 
 int bios_setup(void)
 {
-	ulong i386boot_bios      = (ulong)&_i386boot_bios;
+	ulong i386boot_bios      = (ulong)&_i386boot_bios + gd->reloc_off;
 	ulong i386boot_bios_size = (ulong)&_i386boot_bios_size;
 
 	static int done=0;

index 3c3c1fc..b3f5123 100644
@@ -37,7 +37,7 @@ extern char realmode_enter;
 
 int realmode_setup(void)
 {
-	ulong i386boot_realmode      = (ulong)&_i386boot_realmode;
+	ulong i386boot_realmode      = (ulong)&_i386boot_realmode + gd->reloc_off;
 	ulong i386boot_realmode_size = (ulong)&_i386boot_realmode_size;
 
 	/* copy the realmode switch code */

index b3bf10b..0e9beb7 100644
@@ -7,6 +7,8 @@
 #include <config.h>
 #include <ns16550.h>
 #include <watchdog.h>
+#include <linux/types.h>
+#include <asm/io.h>
 
 #define UART_LCRVAL UART_LCR_8N1		/* 8 data, 1 stop, no parity */
 #define UART_MCRVAL (UART_MCR_DTR | \

@@ -14,28 +16,35 @@
 #define UART_FCRVAL (UART_FCR_FIFO_EN |	\
 		     UART_FCR_RXSR |	\
 		     UART_FCR_TXSR)		/* Clear & enable FIFOs */
+#ifdef CONFIG_X86
+#define serial_out(x,y)	outb(x,(ulong)y)
+#define serial_in(y)	inb((ulong)y)
+#else
+#define serial_out(x,y) writeb(x,y)
+#define serial_in(y) 	readb(y)
+#endif
 
 void NS16550_init (NS16550_t com_port, int baud_divisor)
 {
-	com_port->ier = 0x00;
+	serial_out(0x00, &com_port->ier);
 #if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)
-	com_port->mdr1 = 0x7;	/* mode select reset TL16C750*/
+	serial_out(0x7, &com_port->mdr1);	/* mode select reset TL16C750*/
 #endif
-	com_port->lcr = UART_LCR_BKSE | UART_LCRVAL;
-	com_port->dll = 0;
-	com_port->dlm = 0;
-	com_port->lcr = UART_LCRVAL;
-	com_port->mcr = UART_MCRVAL;
-	com_port->fcr = UART_FCRVAL;
-	com_port->lcr = UART_LCR_BKSE | UART_LCRVAL;
-	com_port->dll = baud_divisor & 0xff;
-	com_port->dlm = (baud_divisor >> 8) & 0xff;
-	com_port->lcr = UART_LCRVAL;
+	serial_out(UART_LCR_BKSE | UART_LCRVAL, (ulong)&com_port->lcr);
+	serial_out(0, &com_port->dll);
+	serial_out(0, &com_port->dlm);
+	serial_out(UART_LCRVAL, &com_port->lcr);
+	serial_out(UART_MCRVAL, &com_port->mcr);
+	serial_out(UART_FCRVAL, &com_port->fcr);
+	serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
+	serial_out(baud_divisor & 0xff, &com_port->dll);
+	serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
+	serial_out(UART_LCRVAL, &com_port->lcr);
 #if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)
 #if defined(CONFIG_APTIX)
-	com_port->mdr1 = 3;	/* /13 mode so Aptix 6MHz can hit 115200 */
+	serial_out(3, &com_port->mdr1);	/* /13 mode so Aptix 6MHz can hit 115200 */
 #else
-	com_port->mdr1 = 0;	/* /16 is proper to hit 115200 with 48MHz */
+	serial_out(0, &com_port->mdr1);	/* /16 is proper to hit 115200 with 48MHz */
 #endif
 #endif /* CONFIG_OMAP */
 }

@@ -43,42 +52,42 @@ void NS16550_init (NS16550_t com_port, int baud_divisor)
 #ifndef CONFIG_NS16550_MIN_FUNCTIONS
 void NS16550_reinit (NS16550_t com_port, int baud_divisor)
 {
-	com_port->ier = 0x00;
-	com_port->lcr = UART_LCR_BKSE | UART_LCRVAL;
-	com_port->dll = 0;
-	com_port->dlm = 0;
-	com_port->lcr = UART_LCRVAL;
-	com_port->mcr = UART_MCRVAL;
-	com_port->fcr = UART_FCRVAL;
-	com_port->lcr = UART_LCR_BKSE;
-	com_port->dll = baud_divisor & 0xff;
-	com_port->dlm = (baud_divisor >> 8) & 0xff;
-	com_port->lcr = UART_LCRVAL;
+	serial_out(0x00, &com_port->ier);
+	serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
+	serial_out(0, &com_port->dll);
+	serial_out(0, &com_port->dlm);
+	serial_out(UART_LCRVAL, &com_port->lcr);
+	serial_out(UART_MCRVAL, &com_port->mcr);
+	serial_out(UART_FCRVAL, &com_port->fcr);
+	serial_out(UART_LCR_BKSE, &com_port->lcr);
+	serial_out(baud_divisor & 0xff, &com_port->dll);
+	serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
+	serial_out(UART_LCRVAL, &com_port->lcr);
 }
 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */
 
 void NS16550_putc (NS16550_t com_port, char c)
 {
-	while ((com_port->lsr & UART_LSR_THRE) == 0);
-	com_port->thr = c;
+	while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0);
+	serial_out(c, &com_port->thr);
 }
 
 #ifndef CONFIG_NS16550_MIN_FUNCTIONS
 char NS16550_getc (NS16550_t com_port)
 {
-	while ((com_port->lsr & UART_LSR_DR) == 0) {
+	while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) {
 #ifdef CONFIG_USB_TTY
 		extern void usbtty_poll(void);
 		usbtty_poll();
 #endif
 		WATCHDOG_RESET();
 	}
-	return (com_port->rbr);
+	return serial_in(&com_port->rbr);
 }
 
 int NS16550_tstc (NS16550_t com_port)
 {
-	return ((com_port->lsr & UART_LSR_DR) != 0);
+	return ((serial_in(&com_port->lsr) & UART_LSR_DR) != 0);
 }
 
 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */

index f794beb..52ea140 100644
@@ -111,8 +111,9 @@ int board_early_init_f(void)
 	writew(0x0615, &sc520_mmcr->romcs1ctl);
 	writew(0x0615, &sc520_mmcr->romcs2ctl);
 
-	writeb(0x02, &sc520_mmcr->adddecctl);
+	writeb(0x00, &sc520_mmcr->adddecctl);
 	writeb(0x07, &sc520_mmcr->uart1ctl);
+	writeb(0x07, &sc520_mmcr->uart2ctl);
 	writeb(0x06, &sc520_mmcr->sysarbctl);
 	writew(0x0003, &sc520_mmcr->sysarbmenb);
 

index 5f9ffd7..d4a632b 100644
@@ -41,7 +41,8 @@ struct serial_device *__default_serial_console (void)
 #elif defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
    || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) \
    || defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC83xx) \
-   || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+   || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) \
+   || defined(CONFIG_SYS_SC520)
 #if defined(CONFIG_CONS_INDEX) && defined(CONFIG_SYS_NS16550_SERIAL)
 #if (CONFIG_CONS_INDEX==1)
 	return &eserial1_device;

506 lines not on this page · raw message

index 6a68bf4..971840f 100644
@@ -21,6 +21,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm/ibmpc.h>
 /*
  * board/config.h - configuration options, board specific
  */

@@ -55,6 +56,25 @@
 #undef CONFIG_HW_WATCHDOG
 
  /*-----------------------------------------------------------------------
+  * Serial Configuration
+  */
+#define CONFIG_SERIAL_MULTI
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		1843200
+#define CONFIG_BAUDRATE			9600
+#define CONFIG_SYS_BAUDRATE_TABLE	\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CONFIG_SYS_NS16550_COM1		UART0_BASE
+#define CONFIG_SYS_NS16550_COM2		UART1_BASE
+#define CONFIG_SYS_NS16550_COM3		(0x1000 + UART0_BASE)
+#define CONFIG_SYS_NS16550_COM4		(0x1000 + UART1_BASE)
+
+ /*-----------------------------------------------------------------------
   * Video Configuration
   */
 #undef CONFIG_VIDEO			/* No Video Hardware */

@@ -65,8 +85,6 @@
  */
 #define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
 
-#define CONFIG_BAUDRATE		9600
-
 /*-----------------------------------------------------------------------
  * Command line configuration.
  */

@@ -123,9 +141,6 @@
 
 #define	CONFIG_SYS_HZ			1024		/* incrementer freq: 1kHz */
 
-						/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 /*-----------------------------------------------------------------------
  * SDRAM Configuration
  */

index f2638ec..aa87a93 100644
@@ -25,7 +25,8 @@ extern struct serial_device * default_serial_console (void);
 #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || \
     defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) || \
     defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC83xx) || \
-    defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+    defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \
+    defined(CONFIG_SYS_SC520)
 extern struct serial_device serial0_device;
 extern struct serial_device serial1_device;
 #if defined(CONFIG_SYS_NS16550_SERIAL)

index 947a8ec..7115a2f 100644
@@ -37,6 +37,7 @@
 #include <malloc.h>
 #include <net.h>
 #include <ide.h>
+#include <serial.h>
 #include <asm/u-boot-i386.h>
 #include <elf.h>
 

@@ -149,7 +150,6 @@ static void display_flash_config (ulong size)
 typedef int (init_fnc_t) (void);
 
 init_fnc_t *init_sequence[] = {
-	serial_init,
 	cpu_init_r,		/* basic cpu dependent setup */
 	board_early_init_r,	/* basic board dependent setup */
 	dram_init,		/* configure available RAM banks */

@@ -277,6 +277,9 @@ void board_init_r(gd_t *id, ulong dest_addr)
 	}
 	show_boot_progress(0x23);
 
+#ifdef CONFIG_SERIAL_MULTI
+	serial_initialize();
+#endif
 	/* configure available FLASH banks */
 	size = flash_init();
 	display_flash_config(size);

index 7c99c8c..2bce82e 100644
@@ -43,6 +43,8 @@ int cpu_init_interrupts(void);
 int board_init(void);
 int dram_init(void);
 
+void setup_pcat_compatibility(void);
+
 void isa_unmap_rom(u32 addr);
 u32 isa_map_rom(u32 bus_addr, int size);
 

index 7115a2f..b852ed1 100644
@@ -441,3 +441,11 @@ unsigned long do_go_exec (ulong (*entry)(int, char *[]), int argc, char *argv[])
 
 	return (entry) (argc, argv);
 }
+
+void setup_pcat_compatibility(void)
+	__attribute__((weak, alias("__setup_pcat_compatibility")));
+
+void __setup_pcat_compatibility(void)
+{
+}
+

new file mode 100644
index 0000000..15828b2
@@ -0,0 +1,105 @@
+#ifndef _ASM_GENERIC_IOCTL_H
+#define _ASM_GENERIC_IOCTL_H
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms.  The generic ioctl numbering scheme doesn't really enforce
+ * a type field.  De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here.  Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+
+/*
+ * Let any architecture override either of the following before
+ * including this file.
+ */
+
+#ifndef _IOC_SIZEBITS
+# define _IOC_SIZEBITS	14
+#endif
+
+#ifndef _IOC_DIRBITS
+# define _IOC_DIRBITS	2
+#endif
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits, which any architecture can choose to override
+ * before including this file.
+ */
+
+#ifndef _IOC_NONE
+# define _IOC_NONE	0U
+#endif
+
+#ifndef _IOC_WRITE
+# define _IOC_WRITE	1U
+#endif
+
+#ifndef _IOC_READ
+# define _IOC_READ	2U
+#endif
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+#ifdef __KERNEL__
+/* provoke compile error for invalid uses of size argument */
+extern unsigned int __invalid_size_argument_for_IOC;
+#define _IOC_TYPECHECK(t) \
+	((sizeof(t) == sizeof(t[1]) && \
+	  sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
+	  sizeof(t) : __invalid_size_argument_for_IOC)
+#else
+#define _IOC_TYPECHECK(t) (sizeof(t))
+#endif
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOR_BAD(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW_BAD(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR_BAD(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _ASM_GENERIC_IOCTL_H */

123 lines not on this page · raw message

155 lines not on this page · raw message

new file mode 100644
index 0000000..b279fe0
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>

new file mode 100644
index 0000000..7e5dff1
@@ -0,0 +1,34 @@
+#ifndef _ASM_X86_IST_H
+#define _ASM_X86_IST_H
+
+/*
+ * Include file for the interface to IST BIOS
+ * Copyright 2002 Andy Grover <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+
+#include <linux/types.h>
+
+struct ist_info {
+	__u32 signature;
+	__u32 command;
+	__u32 event;
+	__u32 perf_level;
+};
+
+#ifdef __KERNEL__
+
+extern struct ist_info ist_info;
+
+#endif	/* __KERNEL__ */
+#endif /* _ASM_X86_IST_H */

220 lines not on this page · raw message

87 lines not on this page · raw message

61 lines not on this page · raw message

303 lines not on this page · raw message

194 lines not on this page · raw message

new file mode 100644
index 0000000..aa91eb3
@@ -0,0 +1,7 @@
+#ifndef _LINUX_IOCTL_H
+#define _LINUX_IOCTL_H
+
+#include <asm/ioctl.h>
+
+#endif /* _LINUX_IOCTL_H */
+

192 lines not on this page · raw message

84 lines not on this page · raw message

215 lines not on this page · raw message

index eca48e0..d5617e9 100644
@@ -69,7 +69,11 @@ int timer_init(void)
 	return 0;
 }
 
+/* Allow boards to override udelay implementation */
 void __udelay(unsigned long usec)
+	__attribute__((weak, alias("sc520_udelay")));
+
+void sc520_udelay(unsigned long usec)
 {
 	int m = 0;
 	long u;

index 57c9904..20384a4 100644
@@ -28,6 +28,7 @@
 
 void init_sc520(void);
 unsigned long init_sc520_dram(void);
+void sc520_udelay(unsigned long usec);
 
 /* Memory mapped configuration registers */
 typedef struct sc520_mmcr {

index 971840f..58f63f8 100644
@@ -197,7 +197,7 @@
 					 CONFIG_SYS_FLASH_BASE_1, \
 					 CONFIG_SYS_FLASH_BASE_2}
 #define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
 #define CONFIG_SYS_FLASH_LEGACY_512Kx8

index 58f63f8..19a81b8 100644
@@ -139,7 +139,7 @@
 
 #define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
 
-#define	CONFIG_SYS_HZ			1024		/* incrementer freq: 1kHz */
+#define	CONFIG_SYS_HZ			1000		/* incrementer freq: 1kHz */
 
 /*-----------------------------------------------------------------------
  * SDRAM Configuration

index 52ea140..9d782f3 100644
@@ -24,6 +24,8 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/ic/sc520.h>
+#include <net.h>
+#include <netdev.h>
 
 #ifdef CONFIG_HW_WATCHDOG
 #include <watchdog.h>

@@ -173,3 +175,13 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
 	} else
 		return 0;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	int adapters;
+	adapters = pci_eth_init(bis);
+
+	if (adapters > 0)
+		eth_init(bis);
+
+	return adapters;

index db8a727..a3df564 100644
@@ -214,7 +214,7 @@ int rtl8139_initialize(bd_t *bis)
 		if ((devno = pci_find_devices(supported, idx++)) < 0)
 			break;
 
-		pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
+		pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, &iobase);
 		iobase &= ~0xf;
 
 		debug ("rtl8139: REALTEK RTL8139 @0x%x\n", iobase);

index 20384a4..d19cac6 100644
@@ -307,14 +307,14 @@ extern volatile sc520_mmcr_t *sc520_mmcr;
 
 /* PCI I/O space from 0x1000 to 0xdfff
  * (make 0xe000-0xfdff available for stuff like PCCard boot) */
-#define SC520_PCI_IO_PHYS	0x00001000
-#define SC520_PCI_IO_BUS	0x00001000
+#define SC520_PCI_IO_PHYS	0x00002000
+#define SC520_PCI_IO_BUS	0x00002000
 #define SC520_PCI_IO_SIZE	0x0000d000
 
 /* system memory from 0x00000000 to 0x0fffffff */
 #define	SC520_PCI_MEMORY_PHYS	0x00000000
 #define	SC520_PCI_MEMORY_BUS	0x00000000
-#define SC520_PCI_MEMORY_SIZE	0x10000000
+#define SC520_PCI_MEMORY_SIZE	0x08000000
 
 /* PCI bus memory from 0x10000000 to 0x26ffffff
  * (make 0x27000000 - 0x27ffffff available for stuff like PCCard boot) */

index 19a81b8..4380bb1 100644
@@ -104,9 +104,10 @@
 #define CONFIG_CMD_LOADS	/* loads			*/
 #define CONFIG_CMD_MEMORY	/* md mm nm mw cp cmp crc base loop mtest */
 #define CONFIG_CMD_MISC		/* Misc functions like sleep etc*/
-#undef CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
+#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
 #undef CONFIG_CMD_NFS		/* NFS support			*/
 #define CONFIG_CMD_PCI		/* PCI support			*/
+#define CONFIG_CMD_PING		/* ICMP echo support		*/
 #define CONFIG_CMD_RUN		/* run command in env variable	*/
 #define CONFIG_CMD_SAVEENV	/* saveenv			*/
 #define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/

@@ -225,6 +226,12 @@
 #define CONFIG_SYS_THIRD_PCI_IRQ   11
 #define CONFIG_SYS_FORTH_PCI_IRQ   15
 
+ /*
+ * Network device (TRL8100B) support
+ */
+#define CONFIG_NET_MULTI
+#define CONFIG_RTL8139
+
 /*-----------------------------------------------------------------------
  * Hardware watchdog configuration
  */

index 9d782f3..ac3f958 100644
@@ -185,3 +185,41 @@ int board_eth_init(bd_t *bis)
 		eth_init(bis);
 
 	return adapters;
+
+void setup_pcat_compatibility()
+{
+	/* disable global interrupt mode */
+	writeb(0x40, &sc520_mmcr->picicr);
+
+	/* set all irqs to edge */
+	writeb(0x00, &sc520_mmcr->pic_mode[0]);
+	writeb(0x00, &sc520_mmcr->pic_mode[1]);
+	writeb(0x00, &sc520_mmcr->pic_mode[2]);
+
+	/*
+	 *  active low polarity on PIC interrupt pins,
+	 *  active high polarity on all other irq pins
+	 */
+	writew(0x0000,&sc520_mmcr->intpinpol);
+
+	/* Set PIT 0 -> IRQ0, RTC -> IRQ8, FP error -> IRQ13 */
+	writeb(SC520_IRQ0, &sc520_mmcr->pit_int_map[0]);
+	writeb(SC520_IRQ8, &sc520_mmcr->rtcmap);
+	writeb(SC520_IRQ13, &sc520_mmcr->ferrmap);
+
+	/* Disable all other interrupt sources */
+	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_tmr_int_map[0]);
+	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_tmr_int_map[1]);
+	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_tmr_int_map[2]);
+	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pit_int_map[1]);
+	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pit_int_map[2]);
+	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pci_int_map[0]);	/* disable PCI INT A */
+	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pci_int_map[1]);	/* disable PCI INT B */
+	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pci_int_map[2]);	/* disable PCI INT C */
+	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pci_int_map[3]);	/* disable PCI INT D */
+	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->dmabcintmap);		/* disable DMA INT */
+	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->ssimap);
+	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->wdtmap);
+	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->wpvmap);
+	writeb(SC520_IRQ_DISABLED, &sc520_mmcr->icemap);
+}

index 4380bb1..1713cd1 100644
@@ -159,7 +159,7 @@
  * CPU Features
  */
 #define CONFIG_SYS_SC520_HIGH_SPEED	0	/* 100 or 133MHz */
-#undef  CONFIG_SYS_SC520_RESET			/* use SC520 MMCR's to reset cpu */
+#define CONFIG_SYS_SC520_RESET			/* use SC520 MMCR's to reset cpu */
 #define CONFIG_SYS_SC520_TIMER			/* use SC520 swtimers */
 #undef  CONFIG_SYS_GENERIC_TIMER		/* use the i8254 PIT timers */
 #undef  CONFIG_SYS_TSC_TIMER			/* use the Pentium TSC timers */