2.6.33.1 regression: sound splutters
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi folks,
With 2.6.33.1 and 2.6.34-rc2 sound splutters for my PC. Moving back to 2.6.29.8 makes the problem go away.
lspci:
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
Subsystem: AOPEN Inc. Device 0575
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d4340000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Can anybody reproduce this? Please mail if I can help to track this down.
Regards
Harri
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAkux40sACgkQUTlbRTxpHjcXZwCeMyvXvah8HDeRd0h6luGSP5Yy b5kAniUhFJehUzHZGIashlGPGzw6kIW9
=tSbA
-----END PGP SIGNATURE-----
At Tue, 30 Mar 2010 13:40:59 +0200,
Quoted 5 lines · Harald Dunkel
Hi folks,
With 2.6.33.1 and 2.6.34-rc2 sound splutters for my PC. Moving back to 2.6.29.8 makes the problem go away.
Hm, it's a bit old to bisect. What about 2.6.32.*?
Quoted 11 lines
lspci:
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
Subsystem: AOPEN Inc. Device 0575
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory atd4340000(64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Quoted 2 lines
Can anybody reproduce this? Please mail if I can help to track this down.
First try the freshly released 2.6.34-rc3. If the problem persists, run alsa-info.sh with --no-upload option, and attach the generated file for further analysis.
The script is found in www.alsa-project.org.
thanks,
Takashi
Quoted 8 lines · Takashi Iwai
At Tue, 30 Mar 2010 13:40:59 +0200,
Quoted 3 lines · Harald Dunkel
With 2.6.33.1 and 2.6.34-rc2 sound splutters for my PC. Moving back to 2.6.29.8 makes the problem go away.
Hm, it's a bit old to bisect. What about 2.6.32.*?
Sorry, that was a typo. The good version is 2.6.32.8.
Quoted 4 lines
First try the freshly released 2.6.34-rc3. If the problem persists, run
alsa-info.shwith --no-upload option, and attach the generated file for further analysis.
Same problem with rc3. See attachment.
Regards
Harri
At Thu, 01 Apr 2010 11:30:21 +0200,
Quoted 5 lines · Harald Dunkel
Quoted 3 lines · Takashi Iwai
At Tue, 30 Mar 2010 13:40:59 +0200,
Quoted 1 line · Harald Dunkel
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
With 2.6.33.1 and 2.6.34-rc2 sound splutters for my PC. Moving back to 2.6.29.8 makes the problem go away.
Hm, it's a bit old to bisect. What about 2.6.32.*?
Sorry, that was a typo. The good version is 2.6.32.8.
OK, what about enable_msi=0 option for snd-hda-intel module?
Takashi
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 3 lines · Takashi Iwai
OK, what about enable_msi=0 option for snd-hda-intel module?
Now it works.
I have no idea what this enable_msi thing is about, but according to Documentation/sound/alsa/ALSA-Configuration.txt it should be off by default. Would you suggest to make this change permanent?
Regards
Harri
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAku0sywACgkQUTlbRTxpHjcevACfWThvjFATNwcA1q5vtz4LOVFz JF8An3/+2d3OGmrJoEOJWEOY7n7If/GX
=sJ1q
-----END PGP SIGNATURE-----
At Thu, 01 Apr 2010 16:52:28 +0200,
Quoted 11 lines · Harald Dunkel
Quoted 3 lines · Takashi Iwai
OK, what about enable_msi=0 option for snd-hda-intel module?
Now it works.
I have no idea what this
enable_msithing is about, but according toDocumentation/sound/alsa/ALSA-Configuration.txtit should be off by default.
This was enabled as default but for Nvidia controller since 2.6.33. I'll need to update the document, too...
Quoted 1 line
Would you suggest to make this change permanent?
Apply the patch like below. Replace "Unknown PC" with something more useful.
Could you tell more details about your machine, which vendor, product name etc to fill there? Then I'll commit the fix to the upstream.
thanks,
Takashi
---
sound/pci/hda/hda_intel.c +1 -0
@@ -2366,6 +2366,7 @@ static struct snd_pci_quirk msi_black_list[] __devinitdata = {SND_PCI_QUIRK (0x1043 ,0x81f6 ,"ASUS" ,0 ),/* nvidia */ SND_PCI_QUIRK (0x1043 ,0x822d ,"ASUS" ,0 ),/* Athlon64 X2 + nvidia MCP55 */ SND_PCI_QUIRK (0x1849 ,0x0888 ,"ASRock" ,0 ),/* Athlon64 X2 + nvidia */ + SND_PCI_QUIRK(0xa0a0, 0x0575, "Unknown PC", 0), /* Unknown PC */ {} };
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 4 lines · Takashi Iwai
Could you tell more details about your machine, which vendor, product name etc to fill there? Then I'll commit the fix to the upstream.
The PC is a (pretty old) Aopen MZ915-M, made in 2006, AFAIR. See the specs on http://global.aopen.com/products_detail.aspx?Auno=2170 .
Many thanx for your help
Harri
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAku0zjYACgkQUTlbRTxpHjdy/wCdG8PhFqQzVyGmiiDxDR4usitE wNsAn1nMYByvdkUFaV/KnLiscQZHm1sK
=x78t
-----END PGP SIGNATURE-----
At Thu, 01 Apr 2010 18:47:50 +0200,
Quoted 9 lines · Harald Dunkel
Quoted 4 lines · Takashi Iwai
Could you tell more details about your machine, which vendor, product name etc to fill there? Then I'll commit the fix to the upstream.
The PC is a (pretty old) Aopen MZ915-M, made in 2006, AFAIR. See the specs on http://global.aopen.com/products_detail.aspx?Auno=2170 .
Thanks. I added the device to the quirk list now.
Takashi