Tevii S660 USB card and dw2102 module generating RC messages
I have a Tevii S660 (a usb dvb-s2 device) which is causing a problem.
After the S660 is attached to a USB 2 socket, the firmware is d/l and everything looks fine but then there are continual RC (check/debug?) messages every 150 ms, then some time later everything goes pear shaped:
Quoted 128 lines
Apr 9 22:15:49 antec300 kernel: [ 16.801141] EXT3 FS on sdd1, internal journal Apr 9 22:15:49 antec300 kernel: [ 16.801144] EXT3-fs: mounted filesystem with writeback data mode. Apr 9 22:15:49 antec300 kernel: [ 17.490262] hda-intel: Codec #3 probe error; disabling it... Apr 9 22:15:50 antec300 kernel: [ 17.568264] hda_codec: Unknown model for ALC889, trying auto-probe from BIOS... Apr 9 22:15:50 antec300 kernel: [ 17.568513] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 Apr 9 22:15:55 antec300 kernel: [ 22.697708] __ratelimit: 24 callbacks suppressed Apr 9 22:15:55 antec300 kernel: [ 22.697711] type=1503 audit(1270847755.406:33): operation="open" pid=2328 parent=1870 profile="/usr/sbin/mysqld" requested_mask="::r" denied_mask="::r" fsuid=119 ouid=0 name="/sys/devices/system/cpu/" . # plug the S660 in ... . Apr 9 22:24:52 antec300 kernel: [ 559.078860] usb 1-1: new high speed USB device using ehci_hcd and address 7 Apr 9 22:24:52 antec300 kernel: [ 559.211222] usb 1-1: configuration #1 chosen from 1 choice Apr 9 22:24:52 antec300 kernel: [ 559.211390] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware Apr 9 22:24:52 antec300 kernel: [ 559.211396] usb 1-1: firmware: requesting dvb-usb-teviis660.fw Apr 9 22:24:52 antec300 kernel: [ 559.224426] dvb-usb: downloading firmware from file 'dvb-usb-teviis660.fw' Apr 9 22:24:52 antec300 kernel: [ 559.224431] dw2102: start downloading DW210X firmware Apr 9 22:24:52 antec300 kernel: [ 559.342492] dvb-usb: found a 'TeVii S660 USB' in warm state. Apr 9 22:24:52 antec300 kernel: [ 559.342561] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Apr 9 22:24:52 antec300 kernel: [ 559.346560] DVB: registering new adapter (TeVii S660 USB) Apr 9 22:24:58 antec300 kernel: [ 565.369380] dvb-usb: MAC address: d0:d0:d0:d0:d0:d0 Apr 9 22:24:58 antec300 kernel: [ 565.394061] Only Zarlink VP310/MT312/ZL10313 are supported chips. Apr 9 22:24:59 antec300 kernel: [ 565.665303] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/input/input11 Apr 9 22:24:59 antec300 kernel: [ 565.665361] dvb-usb: schedule remote query interval to 150 msecs. Apr 9 22:24:59 antec300 kernel: [ 565.665366] dvb-usb: TeVii S660 USB successfully initialized and connected. Apr 9 22:24:59 antec300 kernel: [ 565.665817] usb 1-1: USB disconnect, address 7 Apr 9 22:24:59 antec300 kernel: [ 565.693209] dvb-usb: TeVii S660 USB successfully deinitialized and disconnected. Apr 9 22:24:59 antec300 kernel: [ 565.932522] usb 1-1: new high speed USB device using ehci_hcd and address 8 Apr 9 22:24:59 antec300 kernel: [ 566.064970] usb 1-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2 Apr 9 22:24:59 antec300 kernel: [ 566.065590] usb 1-1: configuration #1 chosen from 1 choice Apr 9 22:24:59 antec300 kernel: [ 566.066164] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware Apr 9 22:24:59 antec300 kernel: [ 566.066171] usb 1-1: firmware: requesting dvb-usb-teviis660.fw Apr 9 22:24:59 antec300 kernel: [ 566.072788] dvb-usb: downloading firmware from file 'dvb-usb-teviis660.fw' Apr 9 22:24:59 antec300 kernel: [ 566.072792] dw2102: start downloading DW210X firmware Apr 9 22:24:59 antec300 kernel: [ 566.192150] dvb-usb: found a 'TeVii S660 USB' in warm state. Apr 9 22:24:59 antec300 kernel: [ 566.192213] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Apr 9 22:24:59 antec300 kernel: [ 566.192644] DVB: registering new adapter (TeVii S660 USB) Apr 9 22:25:03 antec300 kernel: [ 570.298170] dvb-usb: MAC address: 00:18:bd:5c:60:b0 Apr 9 22:25:03 antec300 kernel: [ 570.314148] Only Zarlink VP310/MT312/ZL10313 are supported chips. Apr 9 22:25:04 antec300 kernel: [ 570.589497] DS3000 chip version: 0.192 attached. Apr 9 22:25:04 antec300 kernel: [ 570.589501] dw2102: Attached ds3000+ds2020! Apr 9 22:25:04 antec300 kernel: [ 570.589503] Apr 9 22:25:04 antec300 kernel: [ 570.589707] DVB: registering adapter 1 frontend 0 (Montage Technology DS3000/TS2020)... Apr 9 22:25:04 antec300 kernel: [ 570.590909] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/input/input12 Apr 9 22:25:04 antec300 kernel: [ 570.590965] dvb-usb: schedule remote query interval to 150 msecs. Apr 9 22:25:04 antec300 kernel: [ 570.590971] dvb-usb: TeVii S660 USB successfully initialized and connected. Apr 9 22:25:04 antec300 kernel: [ 570.741992] dw2102: query RC enter Apr 9 22:25:04 antec300 kernel: [ 570.741996] dw2102: query RC start Apr 9 22:25:04 antec300 kernel: [ 570.761941] dw2102: query RC end Apr 9 22:25:04 antec300 kernel: [ 570.912988] dw2102: query RC enter Apr 9 22:25:04 antec300 kernel: [ 570.912993] dw2102: query RC start Apr 9 22:25:04 antec300 kernel: [ 570.920950] dw2102: query RC end Apr 9 22:25:04 antec300 kernel: [ 571.072756] dw2102: query RC enter Apr 9 22:25:04 antec300 kernel: [ 571.072761] dw2102: query RC start Apr 9 22:25:04 antec300 kernel: [ 571.080742] dw2102: query RC end Apr 9 22:25:04 antec300 kernel: [ 571.232512] dw2102: query RC enter Apr 9 22:25:04 antec300 kernel: [ 571.232517] dw2102: query RC start Apr 9 22:25:04 antec300 kernel: [ 571.240503] dw2102: query RC end Apr 9 22:25:04 antec300 kernel: [ 571.393004] dw2102: query RC enter Apr 9 22:25:04 antec300 kernel: [ 571.393009] dw2102: query RC start Apr 9 22:25:04 antec300 kernel: [ 571.400998] dw2102: query RC end Apr 9 22:25:05 antec300 kernel: [ 571.552774] dw2102: query RC enter Apr 9 22:25:05 antec300 kernel: [ 571.552778] dw2102: query RC start Apr 9 22:25:05 antec300 kernel: [ 571.560764] dw2102: query RC end Apr 9 22:25:05 antec300 kernel: [ 571.711791] dw2102: query RC enter Apr 9 22:25:05 antec300 kernel: [ 571.711796] dw2102: query RC start Apr 9 22:25:05 antec300 kernel: [ 571.719776] dw2102: query RC end Apr 9 22:25:05 antec300 kernel: [ 571.871529] dw2102: query RC enter Apr 9 22:25:05 antec300 kernel: [ 571.871535] dw2102: query RC start Apr 9 22:25:05 antec300 kernel: [ 571.879506] dw2102: query RC end Apr 9 22:25:05 antec300 kernel: [ 572.031296] dw2102: query RC enter Apr 9 22:25:05 antec300 kernel: [ 572.031301] dw2102: query RC start Apr 9 22:25:05 antec300 kernel: [ 572.039283] dw2102: query RC end Apr 9 22:25:05 antec300 kernel: [ 572.191370] dw2102: query RC enter Apr 9 22:25:05 antec300 kernel: [ 572.191374] dw2102: query RC start Apr 9 22:25:05 antec300 kernel: [ 572.199064] dw2102: query RC end Apr 9 22:25:05 antec300 kernel: [ 572.351564] dw2102: query RC enter Apr 9 22:25:05 antec300 kernel: [ 572.351569] dw2102: query RC start Apr 9 22:25:05 antec300 kernel: [ 572.359550] dw2102: query RC end Apr 9 22:25:06 antec300 kernel: [ 572.510583] dw2102: query RC enter Apr 9 22:25:06 antec300 kernel: [ 572.510587] dw2102: query RC start Apr 9 22:25:06 antec300 kernel: [ 572.518557] dw2102: query RC end Apr 9 22:25:06 antec300 kernel: [ 572.670334] dw2102: query RC enter Apr 9 22:25:06 antec300 kernel: [ 572.670339] dw2102: query RC start Apr 9 22:25:06 antec300 kernel: [ 572.679070] dw2102: query RC end Apr 9 22:25:06 antec300 kernel: [ 572.830080] dw2102: query RC enter Apr 9 22:25:06 antec300 kernel: [ 572.830084] dw2102: query RC start Apr 9 22:25:06 antec300 kernel: [ 572.838076] dw2102: query RC end . # 15 hrs later ... . Apr 10 13:01:27 antec300 kernel: [53074.896764] dw2102: query RC enter Apr 10 13:01:27 antec300 kernel: [53074.896768] dw2102: query RC start Apr 10 13:01:27 antec300 kernel: [53074.904732] dw2102: query RC end Apr 10 13:01:27 antec300 kernel: [53075.055779] dw2102: query RC enter Apr 10 13:01:27 antec300 kernel: [53075.055784] dw2102: query RC start Apr 10 13:01:27 antec300 kernel: [53075.064511] dw2102: query RC end Apr 10 13:01:27 antec300 kernel: [53075.215544] dw2102: query RC enter Apr 10 13:01:27 antec300 kernel: [53075.215550] dw2102: query RC start Apr 10 13:01:27 antec300 kernel: [53075.224272] dw2102: query RC end Apr 10 13:01:27 antec300 kernel: [53075.375283] dw2102: query RC enter Apr 10 13:01:27 antec300 kernel: [53075.375288] dw2102: query RC start Apr 10 13:01:27 antec300 kernel: [53075.400123] usb 1-1: USB disconnect, address 8 Apr 10 13:01:27 antec300 kernel: [53075.407986] dw2102: dw2102_rc_query: unknown rc key: f7, ec Apr 10 13:01:27 antec300 kernel: [53075.407988] Apr 10 13:01:27 antec300 kernel: [53075.407990] dw2102: query RC end Apr 10 13:03:33 antec300 kernel: [53200.638775] khubd D c08185c0 0 40 2 0x00000000 Apr 10 13:03:33 antec300 kernel: [53200.638782] f71a9da8 00000046 f7193ed0 c08185c0 f7194168 c08185c0 96b72f6a 00003045 Apr 10 13:03:33 antec300 kernel: [53200.638792] c08185c0 c08185c0 f7194168 c08185c0 96b724c4 00003045 c08185c0 f6b19880 Apr 10 13:03:33 antec300 kernel: [53200.638800] f7193ed0 f1ed7000 f71a9db8 f1f867f4 f71a9dd4 f822b50d f71a9dbc c03a4552 Apr 10 13:03:33 antec300 kernel: [53200.638809] Call Trace: Apr 10 13:03:33 antec300 kernel: [53200.638836] [<f822b50d>] dvb_unregister_frontend+0x9d/0xe0 [dvb_core] Apr 10 13:03:33 antec300 kernel: [53200.638845] [<c03a4552>] ? device_unregister+0x12/0x20 Apr 10 13:03:33 antec300 kernel: [53200.638852] [<c015c180>] ? autoremove_wake_function+0x0/0x40 Apr 10 13:03:33 antec300 kernel: [53200.638862] [<f8145095>] dvb_usb_adapter_frontend_exit+0x15/0x30 [dvb_usb] Apr 10 13:03:33 antec300 kernel: [53200.638870] [<f8144485>] dvb_usb_exit+0x45/0xf0 [dvb_usb] Apr 10 13:03:33 antec300 kernel: [53200.638876] [<c0572da4>] ? mutex_lock+0x14/0x40 Apr 10 13:03:33 antec300 kernel: [53200.638883] [<f814455d>] dvb_usb_device_exit+0x2d/0x50 [dvb_usb] Apr 10 13:03:33 antec300 kernel: [53200.638892] [<c0418ab9>] usb_unbind_interface+0xe9/0x120 Apr 10 13:03:33 antec300 kernel: [53200.638897] [<c03a691e>] __device_release_driver+0x3e/0x90 Apr 10 13:03:33 antec300 kernel: [53200.638902] [<c03a6a30>] device_release_driver+0x20/0x40 Apr 10 13:03:33 antec300 kernel: [53200.638908] [<c03a5d73>] bus_remove_device+0x73/0x90 Apr 10 13:03:33 antec300 kernel: [53200.638912] [<c03a44df>] device_del+0xef/0x150 Apr 10 13:03:33 antec300 kernel: [53200.638917] [<c041596d>] usb_disable_device+0x7d/0xf0 Apr 10 13:03:33 antec300 kernel: [53200.638922] [<c04105be>] usb_disconnect+0x9e/0x110 Apr 10 13:03:33 antec300 kernel: [53200.638927] [<c0410973>] hub_port_connect_change+0x83/0x830 Apr 10 13:03:33 antec300 kernel: [53200.638932] [<c0416640>] ? usb_control_msg+0xd0/0x120 Apr 10 13:03:33 antec300 kernel: [53200.638937] [<c040e7bb>] ? clear_port_feature+0x4b/0x60 Apr 10 13:03:33 antec300 kernel: [53200.638942] [<c04121d5>] hub_events+0x1f5/0x500
Quoted 8 lines
Apr 10 13:03:33 antec300 kernel: [53200.638946] [<c057209c>] ? schedule+0x40c/0x730 Apr 10 13:03:33 antec300 kernel: [53200.638952] [<c015c2da>] ? finish_wait+0x4a/0x70 Apr 10 13:03:33 antec300 kernel: [53200.638956] [<c04124e0>] ? hub_thread+0x0/0x150 Apr 10 13:03:33 antec300 kernel: [53200.638960] [<c0412515>] hub_thread+0x35/0x150 Apr 10 13:03:33 antec300 kernel: [53200.638965] [<c015c180>] ? autoremove_wake_function+0x0/0x40 Apr 10 13:03:33 antec300 kernel: [53200.638970] [<c015be8c>] kthread+0x7c/0x90 Apr 10 13:03:33 antec300 kernel: [53200.638975] [<c015be10>] ? kthread+0x0/0x90 Apr 10 13:03:33 antec300 kernel: [53200.638981] [<c0104047>] kernel_thread_helper+0x7/0x10
Tevii say the h/w is ok as it works with a Windows box with their myTevii application. It does work while the RC messages are occurring, I can watch and record SD+HD content in mythtv until the crash.
I have tried the latest tevii beta s/w (v4l and .fw files) and also the v4l-dvb drivers from linuxtv dated 6 april - the same result each time.
I can see in the dw2102.c where 150ms is defined and this seems the
same as other devices in the code.
Google indicates others have seen similar problems but it's not clear what the solution is.
Three questions:
1) are the RC messages caused by a h/w or s/w issue?
2) if it's s/w what do I need to do?
3) is the subsequent khubd crash related and how do I fix that?
I have a nova dvb-t usb box connected and that works fine - I assume there's no interaction.
I am running Ubuntu 9.10 with the following kernel:
Linux antec300.home.org 2.6.31-20-generic #57-Ubuntu SMP Mon Feb 8 09:05:19 UTC 2010 i686 GNU/Linux
thanks for any suggestions, paul
A message that is not in the archive (sent off-list or not yet received): [email protected]
Josu,
mythtv version 0.22-fixes [22594] however I don't think it's mythtv problem but an interaction somewhere between the S660 h/w, firmware and the kernel (vl4-dvb etc)
paul
Quoted 267 lines · Josu Lazkano
Which version of mythtv are you using?
Josu Lazkano
Quoted 262 lines
El 16/04/2010 10:58, "Paul Shepherd" <[email protected] <mailto:[email protected]>> escribió:
I have a Tevii S660 (a usb dvb-s2 device) which is causing a problem.
After the S660 is attached to a USB 2 socket, the firmware is d/l and everything looks fine but then there are continual RC (check/debug?) messages every 150 ms, then some time later everything goes pear shaped:
Apr 9 22:15:49 antec300 kernel: [ 16.801141] EXT3 FS on sdd1, internal journal Apr 9 22:15:49 antec300 kernel: [ 16.801144] EXT3-fs: mounted filesystem with writeback data mode. Apr 9 22:15:49 antec300 kernel: [ 17.490262] hda-intel: Codec #3 probe error; disabling it... Apr 9 22:15:50 antec300 kernel: [ 17.568264] hda_codec: Unknown model for ALC889, trying auto-probe from BIOS... Apr 9 22:15:50 antec300 kernel: [ 17.568513] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 Apr 9 22:15:55 antec300 kernel: [ 22.697708] __ratelimit: 24 callbacks suppressed Apr 9 22:15:55 antec300 kernel: [ 22.697711] type=1503 audit(1270847755.406:33): operation="open" pid=2328 parent=1870 profile="/usr/sbin/mysqld" requested_mask="::r" denied_mask="::r" fsuid=119 ouid=0 name="/sys/devices/system/cpu/" . # plug the S660 in ... . Apr 9 22:24:52 antec300 kernel: [ 559.078860] usb 1-1: new high speed USB device using ehci_hcd and address 7 Apr 9 22:24:52 antec300 kernel: [ 559.211222] usb 1-1: configuration #1 chosen from 1 choice Apr 9 22:24:52 antec300 kernel: [ 559.211390] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware Apr 9 22:24:52 antec300 kernel: [ 559.211396] usb 1-1: firmware: requesting dvb-usb-teviis660.fw Apr 9 22:24:52 antec300 kernel: [ 559.224426] dvb-usb: downloading firmware from file 'dvb-usb-teviis660.fw' Apr 9 22:24:52 antec300 kernel: [ 559.224431] dw2102: start downloading DW210X firmware Apr 9 22:24:52 antec300 kernel: [ 559.342492] dvb-usb: found a 'TeVii S660 USB' in warm state. Apr 9 22:24:52 antec300 kernel: [ 559.342561] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Apr 9 22:24:52 antec300 kernel: [ 559.346560] DVB: registering new adapter (TeVii S660 USB) Apr 9 22:24:58 antec300 kernel: [ 565.369380] dvb-usb: MAC address: d0:d0:d0:d0:d0:d0 Apr 9 22:24:58 antec300 kernel: [ 565.394061] Only Zarlink VP310/MT312/ZL10313 are supported chips. Apr 9 22:24:59 antec300 kernel: [ 565.665303] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/input/input11 Apr 9 22:24:59 antec300 kernel: [ 565.665361] dvb-usb: schedule remote query interval to 150 msecs. Apr 9 22:24:59 antec300 kernel: [ 565.665366] dvb-usb: TeVii S660 USB successfully initialized and connected. Apr 9 22:24:59 antec300 kernel: [ 565.665817] usb 1-1: USB disconnect, address 7 Apr 9 22:24:59 antec300 kernel: [ 565.693209] dvb-usb: TeVii S660 USB successfully deinitialized and disconnected. Apr 9 22:24:59 antec300 kernel: [ 565.932522] usb 1-1: new high speed USB device using ehci_hcd and address 8 Apr 9 22:24:59 antec300 kernel: [ 566.064970] usb 1-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2 Apr 9 22:24:59 antec300 kernel: [ 566.065590] usb 1-1: configuration #1 chosen from 1 choice Apr 9 22:24:59 antec300 kernel: [ 566.066164] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware Apr 9 22:24:59 antec300 kernel: [ 566.066171] usb 1-1: firmware: requesting dvb-usb-teviis660.fw Apr 9 22:24:59 antec300 kernel: [ 566.072788] dvb-usb: downloading firmware from file 'dvb-usb-teviis660.fw' Apr 9 22:24:59 antec300 kernel: [ 566.072792] dw2102: start downloading DW210X firmware Apr 9 22:24:59 antec300 kernel: [ 566.192150] dvb-usb: found a 'TeVii S660 USB' in warm state. Apr 9 22:24:59 antec300 kernel: [ 566.192213] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Apr 9 22:24:59 antec300 kernel: [ 566.192644] DVB: registering new adapter (TeVii S660 USB) Apr 9 22:25:03 antec300 kernel: [ 570.298170] dvb-usb: MAC address: 00:18:bd:5c:60:b0 Apr 9 22:25:03 antec300 kernel: [ 570.314148] Only Zarlink VP310/MT312/ZL10313 are supported chips. Apr 9 22:25:04 antec300 kernel: [ 570.589497] DS3000 chip version: 0.192 attached. Apr 9 22:25:04 antec300 kernel: [ 570.589501] dw2102: Attached ds3000+ds2020! Apr 9 22:25:04 antec300 kernel: [ 570.589503] Apr 9 22:25:04 antec300 kernel: [ 570.589707] DVB: registering adapter 1 frontend 0 (Montage Technology DS3000/TS2020)... Apr 9 22:25:04 antec300 kernel: [ 570.590909] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/input/input12 Apr 9 22:25:04 antec300 kernel: [ 570.590965] dvb-usb: schedule remote query interval to 150 msecs. Apr 9 22:25:04 antec300 kernel: [ 570.590971] dvb-usb: TeVii S660 USB successfully initialized and connected. Apr 9 22:25:04 antec300 kernel: [ 570.741992] dw2102: query RC enter Apr 9 22:25:04 antec300 kernel: [ 570.741996] dw2102: query RC start Apr 9 22:25:04 antec300 kernel: [ 570.761941] dw2102: query RC end Apr 9 22:25:04 antec300 kernel: [ 570.912988] dw2102: query RC enter Apr 9 22:25:04 antec300 kernel: [ 570.912993] dw2102: query RC start Apr 9 22:25:04 antec300 kernel: [ 570.920950] dw2102: query RC end Apr 9 22:25:04 antec300 kernel: [ 571.072756] dw2102: query RC enter Apr 9 22:25:04 antec300 kernel: [ 571.072761] dw2102: query RC start Apr 9 22:25:04 antec300 kernel: [ 571.080742] dw2102: query RC end Apr 9 22:25:04 antec300 kernel: [ 571.232512] dw2102: query RC enter Apr 9 22:25:04 antec300 kernel: [ 571.232517] dw2102: query RC start Apr 9 22:25:04 antec300 kernel: [ 571.240503] dw2102: query RC end Apr 9 22:25:04 antec300 kernel: [ 571.393004] dw2102: query RC enter Apr 9 22:25:04 antec300 kernel: [ 571.393009] dw2102: query RC start Apr 9 22:25:04 antec300 kernel: [ 571.400998] dw2102: query RC end Apr 9 22:25:05 antec300 kernel: [ 571.552774] dw2102: query RC enter Apr 9 22:25:05 antec300 kernel: [ 571.552778] dw2102: query RC start Apr 9 22:25:05 antec300 kernel: [ 571.560764] dw2102: query RC end Apr 9 22:25:05 antec300 kernel: [ 571.711791] dw2102: query RC enter Apr 9 22:25:05 antec300 kernel: [ 571.711796] dw2102: query RC start Apr 9 22:25:05 antec300 kernel: [ 571.719776] dw2102: query RC end Apr 9 22:25:05 antec300 kernel: [ 571.871529] dw2102: query RC enter Apr 9 22:25:05 antec300 kernel: [ 571.871535] dw2102: query RC start Apr 9 22:25:05 antec300 kernel: [ 571.879506] dw2102: query RC end Apr 9 22:25:05 antec300 kernel: [ 572.031296] dw2102: query RC enter Apr 9 22:25:05 antec300 kernel: [ 572.031301] dw2102: query RC start Apr 9 22:25:05 antec300 kernel: [ 572.039283] dw2102: query RC end Apr 9 22:25:05 antec300 kernel: [ 572.191370] dw2102: query RC enter Apr 9 22:25:05 antec300 kernel: [ 572.191374] dw2102: query RC start Apr 9 22:25:05 antec300 kernel: [ 572.199064] dw2102: query RC end Apr 9 22:25:05 antec300 kernel: [ 572.351564] dw2102: query RC enter Apr 9 22:25:05 antec300 kernel: [ 572.351569] dw2102: query RC start Apr 9 22:25:05 antec300 kernel: [ 572.359550] dw2102: query RC end Apr 9 22:25:06 antec300 kernel: [ 572.510583] dw2102: query RC enter Apr 9 22:25:06 antec300 kernel: [ 572.510587] dw2102: query RC start Apr 9 22:25:06 antec300 kernel: [ 572.518557] dw2102: query RC end Apr 9 22:25:06 antec300 kernel: [ 572.670334] dw2102: query RC enter Apr 9 22:25:06 antec300 kernel: [ 572.670339] dw2102: query RC start Apr 9 22:25:06 antec300 kernel: [ 572.679070] dw2102: query RC end Apr 9 22:25:06 antec300 kernel: [ 572.830080] dw2102: query RC enter Apr 9 22:25:06 antec300 kernel: [ 572.830084] dw2102: query RC start Apr 9 22:25:06 antec300 kernel: [ 572.838076] dw2102: query RC end . # 15 hrs later ... . Apr 10 13:01:27 antec300 kernel: [53074.896764] dw2102: query RC enter Apr 10 13:01:27 antec300 kernel: [53074.896768] dw2102: query RC start Apr 10 13:01:27 antec300 kernel: [53074.904732] dw2102: query RC end Apr 10 13:01:27 antec300 kernel: [53075.055779] dw2102: query RC enter Apr 10 13:01:27 antec300 kernel: [53075.055784] dw2102: query RC start Apr 10 13:01:27 antec300 kernel: [53075.064511] dw2102: query RC end Apr 10 13:01:27 antec300 kernel: [53075.215544] dw2102: query RC enter Apr 10 13:01:27 antec300 kernel: [53075.215550] dw2102: query RC start Apr 10 13:01:27 antec300 kernel: [53075.224272] dw2102: query RC end Apr 10 13:01:27 antec300 kernel: [53075.375283] dw2102: query RC enter Apr 10 13:01:27 antec300 kernel: [53075.375288] dw2102: query RC start Apr 10 13:01:27 antec300 kernel: [53075.400123] usb 1-1: USB disconnect, address 8 Apr 10 13:01:27 antec300 kernel: [53075.407986] dw2102: dw2102_rc_query: unknown rc key: f7, ec Apr 10 13:01:27 antec300 kernel: [53075.407988] Apr 10 13:01:27 antec300 kernel: [53075.407990] dw2102: query RC end Apr 10 13:03:33 antec300 kernel: [53200.638775] khubd D c08185c0 0 40 2 0x00000000 Apr 10 13:03:33 antec300 kernel: [53200.638782] f71a9da8 00000046 f7193ed0 c08185c0 f7194168 c08185c0 96b72f6a 00003045 Apr 10 13:03:33 antec300 kernel: [53200.638792] c08185c0 c08185c0 f7194168 c08185c0 96b724c4 00003045 c08185c0 f6b19880 Apr 10 13:03:33 antec300 kernel: [53200.638800] f7193ed0 f1ed7000 f71a9db8 f1f867f4 f71a9dd4 f822b50d f71a9dbc c03a4552 Apr 10 13:03:33 antec300 kernel: [53200.638809] Call Trace: Apr 10 13:03:33 antec300 kernel: [53200.638836] [<f822b50d>] dvb_unregister_frontend+0x9d/0xe0 [dvb_core] Apr 10 13:03:33 antec300 kernel: [53200.638845] [<c03a4552>] ? device_unregister+0x12/0x20 Apr 10 13:03:33 antec300 kernel: [53200.638852] [<c015c180>] ? autoremove_wake_function+0x0/0x40 Apr 10 13:03:33 antec300 kernel: [53200.638862] [<f8145095>] dvb_usb_adapter_frontend_exit+0x15/0x30 [dvb_usb] Apr 10 13:03:33 antec300 kernel: [53200.638870] [<f8144485>] dvb_usb_exit+0x45/0xf0 [dvb_usb] Apr 10 13:03:33 antec300 kernel: [53200.638876] [<c0572da4>] ? mutex_lock+0x14/0x40 Apr 10 13:03:33 antec300 kernel: [53200.638883] [<f814455d>] dvb_usb_device_exit+0x2d/0x50 [dvb_usb] Apr 10 13:03:33 antec300 kernel: [53200.638892] [<c0418ab9>] usb_unbind_interface+0xe9/0x120 Apr 10 13:03:33 antec300 kernel: [53200.638897] [<c03a691e>] __device_release_driver+0x3e/0x90 Apr 10 13:03:33 antec300 kernel: [53200.638902] [<c03a6a30>] device_release_driver+0x20/0x40 Apr 10 13:03:33 antec300 kernel: [53200.638908] [<c03a5d73>] bus_remove_device+0x73/0x90 Apr 10 13:03:33 antec300 kernel: [53200.638912] [<c03a44df>] device_del+0xef/0x150 Apr 10 13:03:33 antec300 kernel: [53200.638917] [<c041596d>] usb_disable_device+0x7d/0xf0 Apr 10 13:03:33 antec300 kernel: [53200.638922] [<c04105be>] usb_disconnect+0x9e/0x110 Apr 10 13:03:33 antec300 kernel: [53200.638927] [<c0410973>] hub_port_connect_change+0x83/0x830 Apr 10 13:03:33 antec300 kernel: [53200.638932] [<c0416640>] ? usb_control_msg+0xd0/0x120 Apr 10 13:03:33 antec300 kernel: [53200.638937] [<c040e7bb>] ? clear_port_feature+0x4b/0x60 Apr 10 13:03:33 antec300 kernel: [53200.638942] [<c04121d5>] hub_events+0x1f5/0x500 Apr 10 13:03:33 antec300 kernel: [53200.638946] [<c057209c>] ? schedule+0x40c/0x730 Apr 10 13:03:33 antec300 kernel: [53200.638952] [<c015c2da>] ? finish_wait+0x4a/0x70 Apr 10 13:03:33 antec300 kernel: [53200.638956] [<c04124e0>] ? hub_thread+0x0/0x150 Apr 10 13:03:33 antec300 kernel: [53200.638960] [<c0412515>] hub_thread+0x35/0x150 Apr 10 13:03:33 antec300 kernel: [53200.638965] [<c015c180>] ? autoremove_wake_function+0x0/0x40 Apr 10 13:03:33 antec300 kernel: [53200.638970] [<c015be8c>] kthread+0x7c/0x90 Apr 10 13:03:33 antec300 kernel: [53200.638975] [<c015be10>] ? kthread+0x0/0x90 Apr 10 13:03:33 antec300 kernel: [53200.638981] [<c0104047>] kernel_thread_helper+0x7/0x10Tevii say the h/w is ok as it works with a Windows box with their myTevii application. It does work while the RC messages are occurring, I can watch and record SD+HD content in mythtv until the crash.
I have tried the latest tevii beta s/w (v4l and .fw files) and also the v4l-dvb drivers from linuxtv dated 6 april - the same result each time.
I can see in thedw2102.cwhere 150ms is defined and this seems the
same as other devices in the code.Google indicates others have seen similar problems but it's not clear what the solution is.
Three questions:
1) are the RC messages caused by a h/w or s/w issue?
2) if it's s/w what do I need to do?
3) is the subsequent khubd crash related and how do I fix that?
I have a nova dvb-t usb box connected and that works fine - I assume there's no interaction.
I am running Ubuntu 9.10 with the following kernel:
Linux antec300.home.org <http://antec300.home.org> 2.6.31-20-generic #57-Ubuntu SMP Mon Feb 8
09:05:19 UTC 2010 i686 GNU/Linuxthanks for any suggestions, paul
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] <mailto:[email protected]>
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Paul,
I know what is happening but i have no solution.
The message: dw2102: query RC enter
is a message from the ir receiver in the device.
I noticed by accident that when you push some buttons on the remote (which came with the tevii box) while tailing the log file you will see the buttons on the remote.
i'm not sure because my device did not work at all so i send it back to my supplier but i think the lib-s2planin drivers could fix it but i had no chance to test it myself. If you are going to try the s2planin drivers please let me know how it works!
With kind regards
William
Quoted 334 lines · Paul Shepherd
Josu,
mythtv version 0.22-fixes [22594] however I don't think it's mythtv problem but an interaction somewhere between the S660 h/w, firmware and the kernel (vl4-dvb etc)
paul
Quoted 321 lines · Josu Lazkano
Which version of mythtv are you using?
Josu Lazkano
Quoted 316 lines
El 16/04/2010 10:58, "Paul Shepherd" <[email protected] <mailto:[email protected]>> escribió:
I have a Tevii S660 (a usb dvb-s2 device) which is causing a problem.
After the S660 is attached to a USB 2 socket, the firmware is d/l and everything looks fine but then there are continual RC (check/debug?) messages every 150 ms, then some time later everything goes pear shaped:
Apr 9 22:15:49 antec300 kernel: [ 16.801141] EXT3 FS on sdd1, internal journal Apr 9 22:15:49 antec300 kernel: [ 16.801144] EXT3-fs: mounted filesystem with writeback data mode. Apr 9 22:15:49 antec300 kernel: [ 17.490262] hda-intel: Codec #3 probe error; disabling it... Apr 9 22:15:50 antec300 kernel: [ 17.568264] hda_codec: Unknown model for ALC889, trying auto-probe from BIOS... Apr 9 22:15:50 antec300 kernel: [ 17.568513] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 Apr 9 22:15:55 antec300 kernel: [ 22.697708] __ratelimit: 24 callbacks suppressed Apr 9 22:15:55 antec300 kernel: [ 22.697711] type=1503 audit(1270847755.406:33): operation="open" pid=2328 parent=1870 profile="/usr/sbin/mysqld" requested_mask="::r" denied_mask="::r" fsuid=119 ouid=0 name="/sys/devices/system/cpu/" . # plug the S660 in ... . Apr 9 22:24:52 antec300 kernel: [ 559.078860] usb 1-1: new high speed USB device using ehci_hcd and address 7 Apr 9 22:24:52 antec300 kernel: [ 559.211222] usb 1-1: configuration #1 chosen from 1 choice Apr 9 22:24:52 antec300 kernel: [ 559.211390] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware Apr 9 22:24:52 antec300 kernel: [ 559.211396] usb 1-1: firmware: requesting dvb-usb-teviis660.fw Apr 9 22:24:52 antec300 kernel: [ 559.224426] dvb-usb: downloading firmware from file 'dvb-usb-teviis660.fw' Apr 9 22:24:52 antec300 kernel: [ 559.224431] dw2102: start downloading DW210X firmware Apr 9 22:24:52 antec300 kernel: [ 559.342492] dvb-usb: found a 'TeVii S660 USB' in warm state. Apr 9 22:24:52 antec300 kernel: [ 559.342561] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Apr 9 22:24:52 antec300 kernel: [ 559.346560] DVB: registering new adapter (TeVii S660 USB) Apr 9 22:24:58 antec300 kernel: [ 565.369380] dvb-usb: MAC address: d0:d0:d0:d0:d0:d0 Apr 9 22:24:58 antec300 kernel: [ 565.394061] Only Zarlink VP310/MT312/ZL10313 are supported chips. Apr 9 22:24:59 antec300 kernel: [ 565.665303] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/input/input11 Apr 9 22:24:59 antec300 kernel: [ 565.665361] dvb-usb: schedule remote query interval to 150 msecs. Apr 9 22:24:59 antec300 kernel: [ 565.665366] dvb-usb: TeVii S660 USB successfully initialized and connected. Apr 9 22:24:59 antec300 kernel: [ 565.665817] usb 1-1: USB disconnect, address 7 Apr 9 22:24:59 antec300 kernel: [ 565.693209] dvb-usb: TeVii S660 USB successfully deinitialized and disconnected. Apr 9 22:24:59 antec300 kernel: [ 565.932522] usb 1-1: new high speed USB device using ehci_hcd and address 8 Apr 9 22:24:59 antec300 kernel: [ 566.064970] usb 1-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2 Apr 9 22:24:59 antec300 kernel: [ 566.065590] usb 1-1: configuration #1 chosen from 1 choice Apr 9 22:24:59 antec300 kernel: [ 566.066164] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware Apr 9 22:24:59 antec300 kernel: [ 566.066171] usb 1-1: firmware: requesting dvb-usb-teviis660.fw Apr 9 22:24:59 antec300 kernel: [ 566.072788] dvb-usb: downloading firmware from file 'dvb-usb-teviis660.fw' Apr 9 22:24:59 antec300 kernel: [ 566.072792] dw2102: start downloading DW210X firmware Apr 9 22:24:59 antec300 kernel: [ 566.192150] dvb-usb: found a 'TeVii S660 USB' in warm state. Apr 9 22:24:59 antec300 kernel: [ 566.192213] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Apr 9 22:24:59 antec300 kernel: [ 566.192644] DVB: registering new adapter (TeVii S660 USB) Apr 9 22:25:03 antec300 kernel: [ 570.298170] dvb-usb: MAC address: 00:18:bd:5c:60:b0 Apr 9 22:25:03 antec300 kernel: [ 570.314148] Only Zarlink VP310/MT312/ZL10313 are supported chips. Apr 9 22:25:04 antec300 kernel: [ 570.589497] DS3000 chip version: 0.192 attached. Apr 9 22:25:04 antec300 kernel: [ 570.589501] dw2102: Attached ds3000+ds2020! Apr 9 22:25:04 antec300 kernel: [ 570.589503] Apr 9 22:25:04 antec300 kernel: [ 570.589707] DVB: registering adapter 1 frontend 0 (Montage Technology DS3000/TS2020)... Apr 9 22:25:04 antec300 kernel: [ 570.590909] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/input/input12 Apr 9 22:25:04 antec300 kernel: [ 570.590965] dvb-usb: schedule remote query interval to 150 msecs. Apr 9 22:25:04 antec300 kernel: [ 570.590971] dvb-usb: TeVii S660 USB successfully initialized and connected. Apr 9 22:25:04 antec300 kernel: [ 570.741992] dw2102: query RC enter Apr 9 22:25:04 antec300 kernel: [ 570.741996] dw2102: query RC start Apr 9 22:25:04 antec300 kernel: [ 570.761941] dw2102: query RC end Apr 9 22:25:04 antec300 kernel: [ 570.912988] dw2102: query RC enter Apr 9 22:25:04 antec300 kernel: [ 570.912993] dw2102: query RC start Apr 9 22:25:04 antec300 kernel: [ 570.920950] dw2102: query RC end Apr 9 22:25:04 antec300 kernel: [ 571.072756] dw2102: query RC enter Apr 9 22:25:04 antec300 kernel: [ 571.072761] dw2102: query RC start Apr 9 22:25:04 antec300 kernel: [ 571.080742] dw2102: query RC end Apr 9 22:25:04 antec300 kernel: [ 571.232512] dw2102: query RC enter Apr 9 22:25:04 antec300 kernel: [ 571.232517] dw2102: query RC start Apr 9 22:25:04 antec300 kernel: [ 571.240503] dw2102: query RC end Apr 9 22:25:04 antec300 kernel: [ 571.393004] dw2102: query RC enter Apr 9 22:25:04 antec300 kernel: [ 571.393009] dw2102: query RC start Apr 9 22:25:04 antec300 kernel: [ 571.400998] dw2102: query RC end Apr 9 22:25:05 antec300 kernel: [ 571.552774] dw2102: query RC enter Apr 9 22:25:05 antec300 kernel: [ 571.552778] dw2102: query RC start Apr 9 22:25:05 antec300 kernel: [ 571.560764] dw2102: query RC end Apr 9 22:25:05 antec300 kernel: [ 571.711791] dw2102: query RC enter Apr 9 22:25:05 antec300 kernel: [ 571.711796] dw2102: query RC start Apr 9 22:25:05 antec300 kernel: [ 571.719776] dw2102: query RC end Apr 9 22:25:05 antec300 kernel: [ 571.871529] dw2102: query RC enter Apr 9 22:25:05 antec300 kernel: [ 571.871535] dw2102: query RC start Apr 9 22:25:05 antec300 kernel: [ 571.879506] dw2102: query RC end Apr 9 22:25:05 antec300 kernel: [ 572.031296] dw2102: query RC enter Apr 9 22:25:05 antec300 kernel: [ 572.031301] dw2102: query RC start Apr 9 22:25:05 antec300 kernel: [ 572.039283] dw2102: query RC end Apr 9 22:25:05 antec300 kernel: [ 572.191370] dw2102: query RC enter Apr 9 22:25:05 antec300 kernel: [ 572.191374] dw2102: query RC start Apr 9 22:25:05 antec300 kernel: [ 572.199064] dw2102: query RC end Apr 9 22:25:05 antec300 kernel: [ 572.351564] dw2102: query RC enter Apr 9 22:25:05 antec300 kernel: [ 572.351569] dw2102: query RC start Apr 9 22:25:05 antec300 kernel: [ 572.359550] dw2102: query RC end Apr 9 22:25:06 antec300 kernel: [ 572.510583] dw2102: query RC enter Apr 9 22:25:06 antec300 kernel: [ 572.510587] dw2102: query RC start Apr 9 22:25:06 antec300 kernel: [ 572.518557] dw2102: query RC end Apr 9 22:25:06 antec300 kernel: [ 572.670334] dw2102: query RC enter Apr 9 22:25:06 antec300 kernel: [ 572.670339] dw2102: query RC start Apr 9 22:25:06 antec300 kernel: [ 572.679070] dw2102: query RC end Apr 9 22:25:06 antec300 kernel: [ 572.830080] dw2102: query RC enter Apr 9 22:25:06 antec300 kernel: [ 572.830084] dw2102: query RC start Apr 9 22:25:06 antec300 kernel: [ 572.838076] dw2102: query RC end . # 15 hrs later ... . Apr 10 13:01:27 antec300 kernel: [53074.896764] dw2102: query RC enter Apr 10 13:01:27 antec300 kernel: [53074.896768] dw2102: query RC start Apr 10 13:01:27 antec300 kernel: [53074.904732] dw2102: query RC end Apr 10 13:01:27 antec300 kernel: [53075.055779] dw2102: query RC enter Apr 10 13:01:27 antec300 kernel: [53075.055784] dw2102: query RC start Apr 10 13:01:27 antec300 kernel: [53075.064511] dw2102: query RC end Apr 10 13:01:27 antec300 kernel: [53075.215544] dw2102: query RC enter Apr 10 13:01:27 antec300 kernel: [53075.215550] dw2102: query RC start Apr 10 13:01:27 antec300 kernel: [53075.224272] dw2102: query RC end Apr 10 13:01:27 antec300 kernel: [53075.375283] dw2102: query RC enter Apr 10 13:01:27 antec300 kernel: [53075.375288] dw2102: query RC start Apr 10 13:01:27 antec300 kernel: [53075.400123] usb 1-1: USB disconnect, address 8 Apr 10 13:01:27 antec300 kernel: [53075.407986] dw2102: dw2102_rc_query: unknown rc key: f7, ec Apr 10 13:01:27 antec300 kernel: [53075.407988] Apr 10 13:01:27 antec300 kernel: [53075.407990] dw2102: query RC end Apr 10 13:03:33 antec300 kernel: [53200.638775] khubd D c08185c0 0 40 2 0x00000000 Apr 10 13:03:33 antec300 kernel: [53200.638782] f71a9da8 00000046 f7193ed0 c08185c0 f7194168 c08185c0 96b72f6a 00003045 Apr 10 13:03:33 antec300 kernel: [53200.638792] c08185c0 c08185c0 f7194168 c08185c0 96b724c4 00003045 c08185c0 f6b19880 Apr 10 13:03:33 antec300 kernel: [53200.638800] f7193ed0 f1ed7000 f71a9db8 f1f867f4 f71a9dd4 f822b50d f71a9dbc c03a4552 Apr 10 13:03:33 antec300 kernel: [53200.638809] Call Trace: Apr 10 13:03:33 antec300 kernel: [53200.638836] [<f822b50d>] dvb_unregister_frontend+0x9d/0xe0 [dvb_core] Apr 10 13:03:33 antec300 kernel: [53200.638845] [<c03a4552>] ? device_unregister+0x12/0x20 Apr 10 13:03:33 antec300 kernel: [53200.638852] [<c015c180>] ? autoremove_wake_function+0x0/0x40 Apr 10 13:03:33 antec300 kernel: [53200.638862] [<f8145095>] dvb_usb_adapter_frontend_exit+0x15/0x30 [dvb_usb] Apr 10 13:03:33 antec300 kernel: [53200.638870] [<f8144485>] dvb_usb_exit+0x45/0xf0 [dvb_usb] Apr 10 13:03:33 antec300 kernel: [53200.638876] [<c0572da4>] ? mutex_lock+0x14/0x40 Apr 10 13:03:33 antec300 kernel: [53200.638883] [<f814455d>] dvb_usb_device_exit+0x2d/0x50 [dvb_usb] Apr 10 13:03:33 antec300 kernel: [53200.638892] [<c0418ab9>] usb_unbind_interface+0xe9/0x120 Apr 10 13:03:33 antec300 kernel: [53200.638897] [<c03a691e>] __device_release_driver+0x3e/0x90 Apr 10 13:03:33 antec300 kernel: [53200.638902] [<c03a6a30>] device_release_driver+0x20/0x40 Apr 10 13:03:33 antec300 kernel: [53200.638908] [<c03a5d73>] bus_remove_device+0x73/0x90 Apr 10 13:03:33 antec300 kernel: [53200.638912] [<c03a44df>] device_del+0xef/0x150 Apr 10 13:03:33 antec300 kernel: [53200.638917] [<c041596d>] usb_disable_device+0x7d/0xf0 Apr 10 13:03:33 antec300 kernel: [53200.638922] [<c04105be>] usb_disconnect+0x9e/0x110 Apr 10 13:03:33 antec300 kernel: [53200.638927] [<c0410973>] hub_port_connect_change+0x83/0x830 Apr 10 13:03:33 antec300 kernel: [53200.638932] [<c0416640>] ? usb_control_msg+0xd0/0x120 Apr 10 13:03:33 antec300 kernel: [53200.638937] [<c040e7bb>] ? clear_port_feature+0x4b/0x60 Apr 10 13:03:33 antec300 kernel: [53200.638942] [<c04121d5>] hub_events+0x1f5/0x500 Apr 10 13:03:33 antec300 kernel: [53200.638946] [<c057209c>] ? schedule+0x40c/0x730 Apr 10 13:03:33 antec300 kernel: [53200.638952] [<c015c2da>] ? finish_wait+0x4a/0x70 Apr 10 13:03:33 antec300 kernel: [53200.638956] [<c04124e0>] ? hub_thread+0x0/0x150 Apr 10 13:03:33 antec300 kernel: [53200.638960] [<c0412515>] hub_thread+0x35/0x150 Apr 10 13:03:33 antec300 kernel: [53200.638965] [<c015c180>] ? autoremove_wake_function+0x0/0x40 Apr 10 13:03:33 antec300 kernel: [53200.638970] [<c015be8c>] kthread+0x7c/0x90 Apr 10 13:03:33 antec300 kernel: [53200.638975] [<c015be10>] ? kthread+0x0/0x90 Apr 10 13:03:33 antec300 kernel: [53200.638981] [<c0104047>] kernel_thread_helper+0x7/0x10Tevii say the h/w is ok as it works with a Windows box with their myTevii application. It does work while the RC messages are occurring, I can watch and record SD+HD content in mythtv until the crash.
I have tried the latest tevii beta s/w (v4l and .fw files) and also the v4l-dvb drivers from linuxtv dated 6 april - the same result each time.
I can see in thedw2102.cwhere 150ms is defined and this seems the
same as other devices in the code.Google indicates others have seen similar problems but it's not clear what the solution is.
Three questions:
1) are the RC messages caused by a h/w or s/w issue?
2) if it's s/w what do I need to do?
3) is the subsequent khubd crash related and how do I fix that?
I have a nova dvb-t usb box connected and that works fine - I assume there's no interaction.
I am running Ubuntu 9.10 with the following kernel:
Linux antec300.home.org <http://antec300.home.org> 2.6.31-20-generic #57-Ubuntu SMP Mon Feb 8
09:05:19 UTC 2010 i686 GNU/Linuxthanks for any suggestions, paul
Signature · 4 lines
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] <mailto:[email protected]> More majordomo info at http://vger.kernel.org/majordomo-info.htmlSignature · 3 lines
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 17 lines · william
Hello Paul,
I know what is happening but i have no solution.
The message: dw2102: query RC enter
is a message from the ir receiver in the device.
I noticed by accident that when you push some buttons on the remote (which came with the tevii box) while tailing the log file you will see the buttons on the remote.i'm not sure because my device did not work at all so i send it back to my supplier but i think the lib-s2planin drivers could fix it but i had no chance to test it myself.
If you are going to try the s2planin drivers please let me know how it works!
Quoted 5 lines
With kind regards
William
I also discovered that RC is remote control. Tried the v4l-dvb in various combos which looked promising for a period but usually ended up with either the s660 or my nova dvb-t usb flooding the system and rendering the usb keyboard unsable. Tried increasing the query time on the RC which seemed to help but still had problems.
Then tried s2-liplianin code at your suggestion which looked promising but it was strangely requesting a 2nd upload dvb-fe-ds3000.fw which although present in /lib/firmware didn't occur. Later it crashed:
Quoted 72 lines
Apr 18 23:23:12 antec300 kernel: [ 324.866653] usb 1-1: new high speed USB device using ehci_hcd and address 4 Apr 18 23:23:12 antec300 kernel: [ 325.458058] usb 1-1: new high speed USB device using ehci_hcd and address 5 Apr 18 23:23:12 antec300 kernel: [ 325.590133] usb 1-1: configuration #1 chosen from 1 choice Apr 18 23:23:12 antec300 kernel: [ 325.590330] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware Apr 18 23:23:12 antec300 kernel: [ 325.590339] usb 1-1: firmware: requesting dvb-usb-s660.fw Apr 18 23:23:12 antec300 kernel: [ 325.595031] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw' Apr 18 23:23:12 antec300 kernel: [ 325.595037] dw2102: start downloading DW210X firmware Apr 18 23:23:12 antec300 kernel: [ 325.713426] dvb-usb: found a 'TeVii S660 USB' in warm state. Apr 18 23:23:12 antec300 kernel: [ 325.713479] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Apr 18 23:23:12 antec300 kernel: [ 325.717592] DVB: registering new adapter (TeVii S660 USB) Apr 18 23:23:18 antec300 kernel: [ 331.716487] dvb-usb: MAC address: 00:00:a0:00:00:00 Apr 18 23:23:18 antec300 kernel: [ 331.780801] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/input/input7 Apr 18 23:23:18 antec300 kernel: [ 331.780862] dvb-usb: schedule remote query interval to 150 msecs. Apr 18 23:23:18 antec300 kernel: [ 331.780866] dvb-usb: TeVii S660 USB successfully initialized and connected. Apr 18 23:23:18 antec300 kernel: [ 331.780905] usb 1-1: USB disconnect, address 5 Apr 18 23:23:18 antec300 kernel: [ 331.813419] dvb-usb: TeVii S660 USB successfully deinitialized and disconnected. Apr 18 23:23:19 antec300 kernel: [ 332.051995] usb 1-1: new high speed USB device using ehci_hcd and address 6 Apr 18 23:23:19 antec300 kernel: [ 332.184522] usb 1-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2 Apr 18 23:23:19 antec300 kernel: [ 332.185114] usb 1-1: configuration #1 chosen from 1 choice Apr 18 23:23:19 antec300 kernel: [ 332.185298] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware Apr 18 23:23:19 antec300 kernel: [ 332.185304] usb 1-1: firmware: requesting dvb-usb-s660.fw Apr 18 23:23:19 antec300 kernel: [ 332.190277] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw' Apr 18 23:23:19 antec300 kernel: [ 332.190282] dw2102: start downloading DW210X firmware Apr 18 23:23:19 antec300 kernel: [ 332.307623] dvb-usb: found a 'TeVii S660 USB' in warm state. Apr 18 23:23:19 antec300 kernel: [ 332.307676] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Apr 18 23:23:19 antec300 kernel: [ 332.307818] DVB: registering new adapter (TeVii S660 USB) Apr 18 23:23:23 antec300 kernel: [ 336.413508] dvb-usb: MAC address: 00:18:bd:5c:60:b0 Apr 18 23:23:23 antec300 kernel: [ 336.462191] DS3000 chip version: 0.192 attached. Apr 18 23:23:23 antec300 kernel: [ 336.462195] dw2102: Attached ds3000+ds2020! Apr 18 23:23:23 antec300 kernel: [ 336.462197] Apr 18 23:23:23 antec300 kernel: [ 336.462202] DVB: registering adapter 1 frontend 0 (Montage Technology DS3000/TS2020)... Apr 18 23:23:23 antec300 kernel: [ 336.463198] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/input/input8 Apr 18 23:23:23 antec300 kernel: [ 336.463244] dvb-usb: schedule remote query interval to 150 msecs. Apr 18 23:23:23 antec300 kernel: [ 336.463250] dvb-usb: TeVii S660 USB successfully initialized and connected. Apr 18 23:24:00 antec300 kernel: [ 373.534616] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)... Apr 18 23:24:00 antec300 kernel: [ 373.534625] usb 1-1: firmware: requesting dvb-fe-ds3000.fw Apr 18 23:24:00 antec300 kernel: [ 373.568629] ds3000_firmware_ondemand: Waiting for firmware upload(2)... Apr 19 07:42:02 antec300 rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="979" x-info="http://www.rsyslog.com"] rsyslogd was HUPed, type 'lightweight'. Apr 19 07:42:02 antec300 rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="979" x-info="http://www.rsyslog.com"] rsyslogd was HUPed, type 'lightweight'. Apr 19 13:58:51 antec300 kernel: [52785.475150] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)... Apr 19 13:58:51 antec300 kernel: [52785.475159] usb 1-1: firmware: requesting dvb-fe-ds3000.fw Apr 19 13:58:51 antec300 kernel: [52785.479716] ds3000_firmware_ondemand: Waiting for firmware upload(2)... Apr 19 17:46:30 antec300 kernel: [66424.255594] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)... Apr 19 17:46:30 antec300 kernel: [66424.255602] usb 1-1: firmware: requesting dvb-fe-ds3000.fw Apr 19 17:46:30 antec300 kernel: [66424.260652] ds3000_firmware_ondemand: Waiting for firmware upload(2)... Apr 19 19:06:34 antec300 kernel: [71220.731748] usb 1-1: USB disconnect, address 6 Apr 19 19:09:44 antec300 kernel: [71410.033797] dvb-usb: TeVii S660 USB successfully deinitialized and disconnected. Apr 19 19:10:23 antec300 kernel: [71448.827499] usb 1-2: USB disconnect, address 2 Apr 19 19:13:47 antec300 kernel: [71652.872116] khubd D c08185c0 0 40 2 0x00000000 Apr 19 19:13:47 antec300 kernel: [71652.872126] f71a9da8 00000046 f2d58000 c08185c0 f7194168 c08185c0 85a47f55 000040fb Apr 19 19:13:47 antec300 kernel: [71652.872140] c08185c0 c08185c0 f7194168 c08185c0 00000000 000040fb c08185c0 f2d46300 Apr 19 19:13:47 antec300 kernel: [71652.872153] f7193ed0 f43f5000 f71a9db8 f6b727f4 f71a9dd4 f830d4fd f71a9dbc c03a4552 Apr 19 19:13:47 antec300 kernel: [71652.872166] Call Trace: Apr 19 19:13:47 antec300 kernel: [71652.872195] [<f830d4fd>] dvb_unregister_frontend+0x9d/0xe0 [dvb_core] Apr 19 19:13:47 antec300 kernel: [71652.872207] [<c03a4552>] ? device_unregister+0x12/0x20 Apr 19 19:13:47 antec300 kernel: [71652.872216] [<c015c180>] ? autoremove_wake_function+0x0/0x40 Apr 19 19:13:47 antec300 kernel: [71652.872229] [<f80eb095>] dvb_usb_adapter_frontend_exit+0x15/0x30 [dvb_usb] Apr 19 19:13:47 antec300 kernel: [71652.872240] [<f80ea485>] dvb_usb_exit+0x45/0xf0 [dvb_usb] Apr 19 19:13:47 antec300 kernel: [71652.872249] [<c0572da4>] ? mutex_lock+0x14/0x40 Apr 19 19:13:47 antec300 kernel: [71652.872260] [<f80ea55d>] dvb_usb_device_exit+0x2d/0x50 [dvb_usb] Apr 19 19:13:47 antec300 kernel: [71652.872272] [<c0418ab9>] usb_unbind_interface+0xe9/0x120 Apr 19 19:13:47 antec300 kernel: [71652.872280] [<c03a691e>] __device_release_driver+0x3e/0x90 Apr 19 19:13:47 antec300 kernel: [71652.872287] [<c03a6a30>] device_release_driver+0x20/0x40 Apr 19 19:13:47 antec300 kernel: [71652.872295] [<c03a5d73>] bus_remove_device+0x73/0x90 Apr 19 19:13:47 antec300 kernel: [71652.872302] [<c03a44df>] device_del+0xef/0x150 Apr 19 19:13:47 antec300 kernel: [71652.872310] [<c041596d>] usb_disable_device+0x7d/0xf0 Apr 19 19:13:47 antec300 kernel: [71652.872328] [<c04105be>] usb_disconnect+0x9e/0x110 Apr 19 19:13:47 antec300 kernel: [71652.872336] [<c0410973>] hub_port_connect_change+0x83/0x830 Apr 19 19:13:47 antec300 kernel: [71652.872344] [<c0416640>] ? usb_control_msg+0xd0/0x120 Apr 19 19:13:47 antec300 kernel: [71652.872352] [<c040e7bb>] ? clear_port_feature+0x4b/0x60 Apr 19 19:13:47 antec300 kernel: [71652.872359] [<c04121d5>] hub_events+0x1f5/0x500 Apr 19 19:13:47 antec300 kernel: [71652.872366] [<c057209c>] ? schedule+0x40c/0x730
Quoted 8 lines
Apr 19 19:13:47 antec300 kernel: [71652.872373] [<c015c2da>] ? finish_wait+0x4a/0x70 Apr 19 19:13:47 antec300 kernel: [71652.872380] [<c04124e0>] ? hub_thread+0x0/0x150 Apr 19 19:13:47 antec300 kernel: [71652.872387] [<c0412515>] hub_thread+0x35/0x150 Apr 19 19:13:47 antec300 kernel: [71652.872394] [<c015c180>] ? autoremove_wake_function+0x0/0x40 Apr 19 19:13:47 antec300 kernel: [71652.872402] [<c015be8c>] kthread+0x7c/0x90 Apr 19 19:13:47 antec300 kernel: [71652.872408] [<c015be10>] ? kthread+0x0/0x90 Apr 19 19:13:47 antec300 kernel: [71652.872417] [<c0104047>] kernel_thread_helper+0x7/0x10 Apr 19 19:15:47 antec300 kernel: [71772.692034] khubd D c08185c0 0 40 2 0x00000000
Not even really sure whether it's the h/w, the firmware, the linux code or a combination; may even be an interaction with my existing nova usb device. Also don't know whether others have a working Ubuntu+S660 combination.
I've wasted too many evenings on this and decided that the S660 on my pc is unlikely to be workable in the near term so have bought a Nova-HD-S2 PCI card. I'll probably have another go later perhaps on another pc.
paul