Skip to contentSkip to conversation

REDIRECT: Fix --to-ports parser

PATCH In review Dmitry V. Levin 2 participants 3 messages Feb 19, 2010 – May 14, 2010 netfilter

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 REDIRECT: Fix --to-ports parser

Rewrite port range validator to use xtables_strtoui() and xtables_param_act(). Original check failed to recognize several types of port range errors, including:
"-1", "-1a", "-1-a", "a-1", "1a-2", "1-2a", etc. Also, original parser erroneously denied using port 0, which is now allowed.

---
 extensions/libipt_REDIRECT.c |   40 ++++++++++++++++++----------------------
 1 files changed, 18 insertions(+), 22 deletions(-)
extensions/libipt_REDIRECT.c +18 -22
index d39f0bd..3dfcadf 100644
@@ -39,40 +39,36 @@ static void REDIRECT_init(struct xt_entry_target *t)
 static void
 parse_ports(const char *arg, struct nf_nat_multi_range *mr)
 {
-	const char *dash;
-	int port;
+	char *end;
+	unsigned int port, maxport;
 
 	mr->range[0].flags |= IP_NAT_RANGE_PROTO_SPECIFIED;
 
-	if (strchr(arg, '.'))
-		xtables_error(PARAMETER_PROBLEM, "IP address not permitted\n");
+	if (!xtables_strtoui(arg, &end, &port, 0, UINT16_MAX) &&
+	    (port = xtables_service_to_port(arg, NULL)) == (unsigned)-1)
+		xtables_param_act(XTF_BAD_VALUE, "REDIRECT", "--to-ports", arg);
 
-	port = atoi(arg);
-	if (port == 0)
-		port = xtables_service_to_port(arg, NULL);
-
-	if (port == 0 || port > 65535)
-		xtables_error(PARAMETER_PROBLEM, "Port \"%s\" not valid\n", arg);
-
-	dash = strchr(arg, '-');
-	if (!dash) {
+	switch (*end) {
+	case '\0':
 		mr->range[0].min.tcp.port
 			= mr->range[0].max.tcp.port
 			= htons(port);
-	} else {
-		int maxport;
+		return;
+	case '-':
+		if (!xtables_strtoui(end + 1, NULL, &maxport, 0, UINT16_MAX) &&
+		    (maxport = xtables_service_to_port(end + 1, NULL)) == (unsigned)-1)
+			break;
 
-		maxport = atoi(dash + 1);
-		if (maxport == 0 || maxport > 65535)
-			xtables_error(PARAMETER_PROBLEM,
-				   "Port `%s' not valid\n", dash+1);
 		if (maxport < port)
-			/* People are stupid. */
-			xtables_error(PARAMETER_PROBLEM,
-				   "Port range `%s' funky\n", arg);
+			break;
+
 		mr->range[0].min.tcp.port = htons(port);
 		mr->range[0].max.tcp.port = htons(maxport);
+		return;
+	default:
+		break;
 	}
+	xtables_param_act(XTF_BAD_VALUE, "REDIRECT", "--to-ports", arg);
 }
 
 static int REDIRECT_parse(int c, char **argv, int invert, unsigned int *flags,
Signature · 1 line
ldv
#1 lore raw

oops, please convert the word "Fix" to lower case before applying.

Signature · 1 line
ldv
#2 lore raw
In reply to Dmitry V. Levin
Quoted 6 lines · Dmitry V. Levin

Rewrite port range validator to use xtables_strtoui() and xtables_param_act(). Original check failed to recognize several types of port range errors, including:
"-1", "-1a", "-1-a", "a-1", "1a-2", "1-2a", etc. Also, original parser erroneously denied using port 0, which is now allowed.

Sorry for the delay, I missed this patch. This looks good me, applied.