pNFS - Both DS and MDS on one machine (file layout)
Subsystems (2)
Hi,
I wonder if it is possible to run both MDS and DS on one machine under usual circumstances. I tried to install both of them on one machine with Debian Etch but I can't make them work. I use the following configuration in /etc/exports:
/pnfs xxx.yyy.zzz.44(rw,fsid=0,no_root_squash,sync,no_subtree_check) /pnfs aaa.bbb.ccc.74(rw,fsid=0,no_root_squash,sync,no_subtree_check) /pnfs/storage xxx.yyy.zzz.44(rw,no_root_squash,sync,no_subtree_check) /pnfs/storage aaa.bbb.ccc.74(rw,no_root_squash,sync,no_subtree_check) /pnfs/export aaa.bbb.ccc.74(rw,no_root_squash,sync,no_subtree_check,pnfs)
and /etc/spnfsd.conf:
[General]
Verbosity = 1
Stripe-size = 8192
Dense-striping = 0
Pipefs-Directory = /var/lib/nfs/rpc_pipefs
DS-Mount-Directory = /spnfs
[DataServers]
NumDS = 1
DS1_IP = xxx.yyy.zzz.44DS1_PORT = 2049DS1_ROOT = /storageDS1_ID = 1
After mounting the pNFS export from the client (different machine) it doesn't use nfs file layout (I have spnfsd running on the server and nfslayoutdriver loaded on the client). When I try to create a file in the mounted directory (e. g. echo aaa>/mnt/testfile), I can't get any response, it just hangs (sometimes terminating it by ^C works, sometimes not). The file is created on the server, but is empty. I thought it could be related to running portmap but even if I run rpcbind instead of portmap, the problem doesn't disappear). Is there any problem with my configuration, is it a bug or MDS and DS just shouldn't be run on one machine?
Best regards,
Jiri Kortus