Skip to contentSkip to conversation

Leadtek DVT1000S W/ Phillips saa7134

linux-dvb Nathan Metcalf 2 participants 4 messages May 19, 2010 – May 20, 2010 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hey Guys,
I hope this is the correct place, I am trying to get a LEADTEK DVT1000S HD Tuner card working in Ubuntu (Latest) When I load the saa7134_dvb kernel module, there are no errors, but /dev/dvb is not created.

I have tried enabling the debug=1 option when loading the module, but don't get any more useful information.

Can someone please assist me? Or direct me to the correct place?

Regards,
Nathan Metcalf

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

#1 lore raw

Hi Nathan,

Am Freitag, den 21.05.2010, 04:48 +1000 schrieb Nathan Metcalf:

Quoted 11 lines

Hey Guys,
I hope this is the correct place, I am trying to get a LEADTEK DVT1000S HD Tuner card working in Ubuntu (Latest) When I load the saa7134_dvb kernel module, there are no errors, but /dev/dvb is not created.

I have tried enabling the debug=1 option when loading the module, but don't get any more useful information.

Can someone please assist me? Or direct me to the correct place?

Regards,
Nathan Metcalf

there was some buglet previously, but the card is else supported since Nov. 01 2009 on mercurial v4l-dvb and later kernels.

http://linuxtv.org/hg/v4l-dvb/rev/855ee0444e61b8dfe98f495026c4e75c461ce9dd

Support for the remote was also added.

Cheers,
Hermann

#2 lore raw

Thanks Hermann,
Does this mean I need to apply that patch you linked to me? Then recompile the module and re-insert?

Regards,
Nathan

Quoted 40 lines · hermann pitton

Hi Nathan,

Am Freitag, den 21.05.2010, 04:48 +1000 schrieb Nathan Metcalf:

Quoted 4 lines

Hey Guys,
I hope this is the correct place, I am trying to get a LEADTEK DVT1000S HD Tuner card working in Ubuntu (Latest) When I load the saa7134_dvb kernel module, there are no errors, but /dev/dvb is not created.

Quoted 8 lines

I have tried enabling the debug=1 option when loading the module, but don't get any more useful information.

Can someone please assist me? Or direct me to the correct place?

Regards,
Nathan Metcalf

there was some buglet previously, but the card is else supported since Nov. 01 2009 on mercurial v4l-dvb and later kernels.

http://linuxtv.org/hg/v4l-dvb/rev/855ee0444e61b8dfe98f495026c4e75c461ce9dd

Support for the remote was also added.

Cheers,
Hermann

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

--
This message was scanned by ESVA and is believed to be clean. To report this message as spam - click the link below
http://mailscan.starnewsgroup.com.au/cgi-bin/learn-msg.cgi?id=EC83EC8003.3A3A3

#3 lore raw

Hi,

Am Freitag, den 21.05.2010, 06:01 +1000 schrieb Nathan Metcalf:

Quoted 6 lines

Thanks Hermann,
Does this mean I need to apply that patch you linked to me? Then recompile the module and re-insert?

Regards,
Nathan

depends on your source. The 2.6.32 has no support for that card and it depends also on further patches for tuner and demodulator

However, all 4 patches in question are in this pull request

Von:
Mauro Carvalho Chehab
<[email protected]>

                                An: 

Linus Torvalds
<[email protected]>
Kopie:
Andrew Morton
<[email protected]>,
[email protected],
[email protected]
Betreff:
[GIT PULL for 2.6.33] V4L/DVB
updates

                             Datum: 
        Wed, 9 Dec 2009 02:16:39

-0200 (05:16 CET)

and via Michael Krufky and Michael Obst for the remote. (add the card, fix the entry, add the remote support, fix some coding style)

You need a kernel >= 2.6.33 or have to build and install mercurial v4l-dvb from linuxtv.org on older kernels.

The current v4l-dvb is in process to gain deeper compatibility for older kernels again, see the daily mails.

[cron job] v4l-dvb daily build
Progress was made from 2.6.33 only a few days ago down to 2.6.25 now. My latest test was on a 2.6.29.

Else you can also use a snapshot from May 04 2010, after that backward compat was limited to 2.6.33 only for a while, see the "v4l-dvb daily build" messages. For 2.6.32 the recent is good again.

Cheers,
Hermann

Quoted 27 lines · hermann pitton
Quoted 26 lines

Hi Nathan,

Am Freitag, den 21.05.2010, 04:48 +1000 schrieb Nathan Metcalf:

Quoted 4 lines

Hey Guys,
I hope this is the correct place, I am trying to get a LEADTEK DVT1000S HD Tuner card working in Ubuntu (Latest) When I load the saa7134_dvb kernel module, there are no errors, but /dev/dvb is not created.

Quoted 8 lines

I have tried enabling the debug=1 option when loading the module, but don't get any more useful information.

Can someone please assist me? Or direct me to the correct place?

Regards,
Nathan Metcalf

there was some buglet previously, but the card is else supported since Nov. 01 2009 on mercurial v4l-dvb and later kernels.

http://linuxtv.org/hg/v4l-dvb/rev/855ee0444e61b8dfe98f495026c4e75c461ce9dd

Support for the remote was also added.

Cheers,
Hermann