hpet: Init capability register only once

From: Jan Kiszka<[email protected]>

The capability register is read-only from guest POV, so we do not need to update it on reset.

Signed-off-by Jan Kiszka<[email protected]>

---
  hw/hpet.c |    9 +++++----
  1 files changed, 5 insertions(+), 4 deletions(-)

hw/hpet.c +5 -4

index 93fc399..e9b585c 100644
@@ -648,10 +648,6 @@ static void hpet_reset(DeviceState *d)
 
      s->hpet_counter = 0ULL;
      s->hpet_offset = 0ULL;
-    /* 64-bit main counter; LegacyReplacementRoute. */
-    s->capability = 0x8086a001ULL;
-    s->capability |= (s->num_timers - 1)<<  HPET_ID_NUM_TIM_SHIFT;
-    s->capability |= ((HPET_CLK_PERIOD)<<  32);
      s->config = 0ULL;
      if (count>  0) {
          /* we don't enable pit when hpet_reset is first called (by hpet_init)

@@ -696,6 +692,11 @@ static int hpet_init(SysBusDevice *dev)
          timer->state = s;
      }
 
+    /* 64-bit main counter; LegacyReplacementRoute. */
+    s->capability = 0x8086a001ULL;
+    s->capability |= (s->num_timers - 1)<<  HPET_ID_NUM_TIM_SHIFT;
+    s->capability |= ((HPET_CLK_PERIOD)<<  32);
+
      isa_reserve_irq(RTC_ISA_IRQ);
      qdev_init_gpio_in(&dev->qdev, hpet_handle_rtc_irq, 1);