Skip to contentSkip to conversation

ocfs2: Let ocfs2_setattr use new truncate sequence.

PATCH In review Tao Ma 1 participant 2 messages Jun 11, 2010 – Jun 18, 2010

Subsystems (2)
lore
Share & tools
lore

Tao Ma

author
#0 lore raw

PATCH v5 1/1 ocfs2: Let ocfs2_setattr use new truncate sequence.

Let ocfs2 use the new truncate sequence. The changes include:
1. Move inode_change_ok into cluster lock and remove inode_newsize_ok.
2. Use truncate_setsize directly since we don't implement our own ->truncate and what we need is "update i_size and truncate_pagecache" which truncate_setsize now does.
3. Change some i_size_read to inode->i_size in ocfs2_setattr since we have i_muext held.
4. For direct write, ocfs2 actually don't allow write to pass i_size(see ocfs2_prepare_inode_for_write), so we don't have a chance to increase i_size. So remove the bogus check.

Cc Joel Becker <[email protected]>
Cc Christoph Hellwig <[email protected]>
Cc Nick Piggin <[email protected]>
---
 fs/ocfs2/file.c |   47 +++++++++++------------------------------------
 1 files changed, 11 insertions(+), 36 deletions(-)
fs/ocfs2/file.c +11 -36
index 1fb0985..98b1f54 100644
@@ -960,13 +960,9 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
 		return 0;
 	}
 
-	status = inode_change_ok(inode, attr);
-	if (status)
-		return status;
-
 	if (is_quota_modification(inode, attr))
 		dquot_initialize(inode);
-	size_change = S_ISREG(inode->i_mode) && attr->ia_valid & ATTR_SIZE;
+	size_change = attr->ia_valid & ATTR_SIZE;
 	if (size_change) {
 		status = ocfs2_rw_lock(inode, 1);
 		if (status < 0) {
@@ -982,12 +978,12 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
 		goto bail_unlock_rw;
 	}
 
-	if (size_change && attr->ia_size != i_size_read(inode)) {
-		status = inode_newsize_ok(inode, attr->ia_size);
-		if (status)
-			goto bail_unlock;
+	status = inode_change_ok(inode, attr);
+	if (status)
+		goto bail_unlock;
 
-		if (i_size_read(inode) > attr->ia_size) {
+	if (size_change && attr->ia_size != inode->i_size) {
+		if (inode->i_size > attr->ia_size) {
 			if (ocfs2_should_order_data(inode)) {
 				status = ocfs2_begin_ordered_truncate(inode,
 								      attr->ia_size);
@@ -1052,22 +1048,12 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
 	}
 
 	/*
-	 * This will intentionally not wind up calling truncate_setsize(),
-	 * since all the work for a size change has been done above.
-	 * Otherwise, we could get into problems with truncate as
-	 * ip_alloc_sem is used there to protect against i_size
-	 * changes.
-	 *
-	 * XXX: this means the conditional below can probably be removed.
+	 * Since all the work for a size change has been done above.
+	 * Call truncate_setsize directly to change size and truncate
+	 * pagecache.
 	 */
-	if ((attr->ia_valid & ATTR_SIZE) &&
-	    attr->ia_size != i_size_read(inode)) {
-		status = vmtruncate(inode, attr->ia_size);
-		if (status) {
-			mlog_errno(status);
-			goto bail_commit;
-		}
-	}
+	if ((attr->ia_valid & ATTR_SIZE) && attr->ia_size != inode->i_size)
+		truncate_setsize(inode, attr->ia_size);
 
 	setattr_copy(inode, attr);
 	mark_inode_dirty(inode);
@@ -2122,17 +2108,6 @@ relock:
 		written = generic_file_direct_write(iocb, iov, &nr_segs, *ppos,
 						    ppos, count, ocount);
 		if (written < 0) {
-			/*
-			 * direct write may have instantiated a few
-			 * blocks outside i_size. Trim these off again.
-			 * Don't need i_size_read because we hold i_mutex.
-			 *
-			 * XXX(truncate): this looks buggy because ocfs2 did not
-			 * actually implement ->truncate.  Take a look at
-			 * the new truncate sequence and update this accordingly
-			 */
-			if (*ppos + count > inode->i_size)
-				truncate_setsize(inode, inode->i_size);
 			ret = written;
 			goto out_dio;
 		}
Signature · 1 line
1.5.5
author
#1 lore raw

Hi Al and Christoph,
can this patch be added to the vfs-2.6.git? Or I should ask Joel to include it in ocfs2.git?

btw, I think both Nick and Joel have acked this patch?

Regards,
Tao

Quoted 102 lines · Tao Ma

Let ocfs2 use the new truncate sequence. The changes include:
1. Move inode_change_ok into cluster lock and remove inode_newsize_ok.
2. Use truncate_setsize directly since we don't implement our own ->truncate and what we need is "update i_size and truncate_pagecache" which truncate_setsize now does.
3. Change some i_size_read to inode->i_size in ocfs2_setattr since we have i_muext held.
4. For direct write, ocfs2 actually don't allow write to pass i_size(see ocfs2_prepare_inode_for_write), so we don't have a chance to increase i_size. So remove the bogus check.

Cc Joel Becker<[email protected]>
Cc Christoph Hellwig<[email protected]>
Cc Nick Piggin<[email protected]>
---
  fs/ocfs2/file.c |   47 +++++++++++------------------------------------
  1 files changed, 11 insertions(+), 36 deletions(-)
fs/ocfs2/file.c +11 -36
index 1fb0985..98b1f54 100644
@@ -960,13 +960,9 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
  		return 0;
  	}
 
-	status = inode_change_ok(inode, attr);
-	if (status)
-		return status;
-
  	if (is_quota_modification(inode, attr))
  		dquot_initialize(inode);
-	size_change = S_ISREG(inode->i_mode)&&  attr->ia_valid&  ATTR_SIZE;
+	size_change = attr->ia_valid&  ATTR_SIZE;
  	if (size_change) {
  		status = ocfs2_rw_lock(inode, 1);
  		if (status<  0) {
@@ -982,12 +978,12 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
  		goto bail_unlock_rw;
  	}
 
-	if (size_change&&  attr->ia_size != i_size_read(inode)) {
-		status = inode_newsize_ok(inode, attr->ia_size);
-		if (status)
-			goto bail_unlock;
+	status = inode_change_ok(inode, attr);
+	if (status)
+		goto bail_unlock;
 
-		if (i_size_read(inode)>  attr->ia_size) {
+	if (size_change&&  attr->ia_size != inode->i_size) {
+		if (inode->i_size>  attr->ia_size) {
  			if (ocfs2_should_order_data(inode)) {
  				status = ocfs2_begin_ordered_truncate(inode,
  								      attr->ia_size);
@@ -1052,22 +1048,12 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
  	}
 
  	/*
-	 * This will intentionally not wind up calling truncate_setsize(),
-	 * since all the work for a size change has been done above.
-	 * Otherwise, we could get into problems with truncate as
-	 * ip_alloc_sem is used there to protect against i_size
-	 * changes.
-	 *
-	 * XXX: this means the conditional below can probably be removed.
+	 * Since all the work for a size change has been done above.
+	 * Call truncate_setsize directly to change size and truncate
+	 * pagecache.
  	 */
-	if ((attr->ia_valid&  ATTR_SIZE)&&
-	    attr->ia_size != i_size_read(inode)) {
-		status = vmtruncate(inode, attr->ia_size);
-		if (status) {
-			mlog_errno(status);
-			goto bail_commit;
-		}
-	}
+	if ((attr->ia_valid&  ATTR_SIZE)&&  attr->ia_size != inode->i_size)
+		truncate_setsize(inode, attr->ia_size);
 
  	setattr_copy(inode, attr);
  	mark_inode_dirty(inode);
@@ -2122,17 +2108,6 @@ relock:
  		written = generic_file_direct_write(iocb, iov,&nr_segs, *ppos,
  						    ppos, count, ocount);
  		if (written<  0) {
-			/*
-			 * direct write may have instantiated a few
-			 * blocks outside i_size. Trim these off again.
-			 * Don't need i_size_read because we hold i_mutex.
-			 *
-			 * XXX(truncate): this looks buggy because ocfs2 did not
-			 * actually implement ->truncate.  Take a look at
-			 * the new truncate sequence and update this accordingly
-			 */
-			if (*ppos + count>  inode->i_size)
-				truncate_setsize(inode, inode->i_size);
  			ret = written;
  			goto out_dio;
  		}