input: samsung-keypad - Add samsung keypad driver
Subsystems (3)
PATCH 1/1 input: samsung-keypad - Add samsung keypad driver
From: Joonyoung Shim <[email protected]>
This patch adds support for keypad driver running on Samsung SoCs. This driver is tested on SMDK6410(S3C6410), SMDKC100(S5PC100), Aquila(S5PC110), GONI(S5PC110) and SMDKV210(S5PV210) boards.
--- drivers/input/keyboard/Kconfig | 9 + drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/samsung-keypad.c | 400 +++++++++++++++++++++++++++++++ 3 files changed, 410 insertions(+), 0 deletions(-) create mode 100644 drivers/input/keyboard/samsung-keypad.c
drivers/input/keyboard/Kconfig +9 -0
@@ -342,6 +342,15 @@ config KEYBOARD_PXA930_ROTARY To compile this driver as a module, choose M here: the module will be called pxa930_rotary. +config KEYBOARD_SAMSUNG + tristate "Samsung keypad support" + depends on SAMSUNG_DEV_KEYPAD + help + Say Y here if you want to use the Samsung keypad. + + To compile this driver as a module, choose M here: the + module will be called samsung-keypad. + config KEYBOARD_STOWAWAY tristate "Stowaway keyboard" select SERIO
drivers/input/keyboard/Makefile +1 -0
@@ -32,6 +32,7 @@ obj-$(CONFIG_KEYBOARD_OPENCORES) += opencores-kbd.o obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o +obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
drivers/input/keyboard/samsung-keypad.c new file +400 -0
400 lines not on this page · raw message
Signature · 1 line
1.6.2.5
PATCH 1/1 input: samsung-keypad - Add samsung keypad driver
Quoted 6 lines · Kukjin Kim
From: Joonyoung Shim <[email protected]>
This patch adds support for keypad driver running on Samsung SoCs. This driver is tested on SMDK6410(S3C6410), SMDKC100(S5PC100), Aquila(S5PC110), GONI(S5PC110) and SMDKV210(S5PV210) boards.
Quoted 6 lines
Signed-off-by Joonyoung Shim <[email protected]>Signed-off-by Kyungmin Park <[email protected]>Tested-by Naveen Krishna Ch <[email protected]>[[email protected]: added comments]Acked-by Kukjin Kim <[email protected]>Signed-off-by Kukjin Kim <[email protected]>
I think this is duplicated posting. Why don't you just reply the tested-by or acked-by at previous my mail?
PATCH 1/1 input: samsung-keypad - Add samsung keypad driver
Quoted 16 lines · Joonyoung Shim
Quoted 4 lines · Kukjin Kim
From: Joonyoung Shim <[email protected]>
This patch adds support for keypad driver running on Samsung SoCs. This driver is tested on SMDK6410(S3C6410), SMDKC100(S5PC100),
Aquila(S5PC110),
Quoted 8 lines
GONI(S5PC110) and SMDKV210(S5PV210) boards.
Signed-off-by Joonyoung Shim <[email protected]>Signed-off-by Kyungmin Park <[email protected]>Tested-by Naveen Krishna Ch <[email protected]>[kgene.kim at samsung.com: added comments]Acked-by Kukjin Kim <[email protected]>Signed-off-by Kukjin Kim <[email protected]>
Quoted 2 lines
I think this is duplicated posting. Why don't you just reply the tested-by or acked-by at previous my mail?
I was just thinking, need to modify comments when added 'Tested-by'.
Anyway, if any problems in here, please kindly ignore.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.