linux-next: Tree for July 23
Subsystems (3)
Hi all,
Changes since 20100722:
New tree: xen
Dropped tree: xen (build problems)
Linus' tree lost its build failure.
The sound tree lost a conflict.
The kgdb tree gained a conflict against Linus' tree.
The catalin tree gained conflicts against the arm tree.
The xen tree gained build problems so I dropped it for today.
The workqueues tree gained conflicts against Linus' tree and the cifs tree.
The staging-next tree gained conflicts against the net tree.
----------------------------------------------------------------------------
I have created today's linux-next tree atgit://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
(patches at http://www.kernel.org/pub/linux/kernel/v2.6/next/ ). If you are tracking the linux-next tree using git, you should not use "git pull" to do so as that will try to merge the new linux-next release with the old one. You should use "git fetch" as mentioned in the FAQ on the wiki (see below).
You can see which trees have been included by looking in the Next/Trees file in the source. There are also quilt-import.log and merge.log files in the Next directory. Between each merge, the tree was built with a ppc64_defconfig for powerpc and an allmodconfig for x86_64. After the final fixups (if any), it is also built with powerpc allnoconfig (32 and 64 bit), ppc44x_defconfig and allyesconfig (minus CONFIG_PROFILE_ALL_BRANCHES - this fails its final link) and i386, sparc and sparc64 defconfig. These builds also have CONFIG_ENABLE_WARN_DEPRECATED, CONFIG_ENABLE_MUST_CHECK and CONFIG_DEBUG_INFO disabled when necessary.
Below is a summary of the state of the merge.
We are up to 167 trees (counting Linus' and 22 trees of patches pending for Linus' tree), more are welcome (even if they are currently empty). Thanks to those who have contributed, and to those who haven't, please do.
Status of my local build tests will be at
http://kisskb.ellerman.id.au/linux-next . If maintainers want to give advice about cross compilers/configs that work, we are always open to add more builds.
Thanks to Jan Dittmer for adding the linux-next tree to his build tests at http://l4x.org/k/ , the guys at http://test.kernel.org/ and Randy Dunlap for doing many randconfig builds.
There is a wiki covering stuff to do with linux-next at
http://linux.f-seidel.de/linux-next/pmwiki/ . Thanks to Frank Seidel.
Signature · 243 lines
Cheers, Stephen Rothwell [email protected] $ git checkout master $ git reset --hard stable Merging origin/master Merging fixes/fixes Merging arm-current/master Merging m68k-current/for-linus Merging powerpc-merge/merge Merging sparc-current/master Merging scsi-rc-fixes/master Merging net-current/master Merging sound-current/for-linus Merging pci-current/for-linus Merging wireless-current/master Merging kbuild-current/rc-fixes Merging quilt/driver-core.current Merging quilt/tty.current Merging quilt/usb.current Merging quilt/staging.current Merging cpufreq-current/fixes Merging input-current/for-linus Merging md-current/for-linus Merging audit-current/for-linus Merging crypto-current/master Merging ide-curent/master Merging dwmw2/master Merging gcl-current/merge Merging arm/devel Merging davinci/davinci-next Merging i.MX/for-next Merging msm/for-next Merging omap/for-next CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-3430sdp.c CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-3630sdp.c CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-am3517evm.c CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-cm-t35.c CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-devkit8000.c CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-igep0020.c CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-ldp.c CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-omap3beagle.c CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-omap3evm.c CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-omap3pandora.c CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-omap3touchbook.c CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-overo.c CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-zoom2.c CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-zoom3.c Merging pxa/for-next Merging samsung/next-samsung Merging s5p/for-next Merging tegra/for-next CONFLICT (content): Merge conflict in arch/arm/Kconfig Merging avr32/avr32-arch Merging blackfin/for-linus Merging cris/for-next Merging ia64/test Merging m68k/for-next Merging m68knommu/for-next Merging microblaze/next CONFLICT (content): Merge conflict in arch/microblaze/mm/init.c Merging mips/mips-for-linux-next Merging parisc/next Merging powerpc/next Merging 4xx/next Merging 52xx-and-virtex/next CONFLICT (content): Merge conflict in drivers/serial/mpc52xx_uart.c Merging galak/next Merging s390/features Merging sh/master Merging genesis/master CONFLICT (content): Merge conflict in arch/arm/configs/ap4evb_defconfig CONFLICT (content): Merge conflict in arch/arm/configs/g3evm_defconfig CONFLICT (content): Merge conflict in arch/arm/configs/g4evm_defconfig Merging sparc/master Merging tile/master Merging xtensa/master Merging ceph/for-next Merging cifs/master Merging configfs/linux-next Merging ecryptfs/next Merging ext3/for_next Merging ext4/next Merging fatfs/master Merging fuse/for-next Merging gfs2/master Merging jfs/next Merging logfs/master CONFLICT (content): Merge conflict in fs/logfs/logfs.h Merging nfs/linux-next Merging nfsd/nfsd-next Merging nilfs2/for-next Merging ocfs2/linux-next Merging omfs/for-next Merging squashfs/master Merging udf/for_next Merging v9fs/for-next Merging ubifs/linux-next Merging xfs/master Merging vfs/for-next CONFLICT (content): Merge conflict in fs/nilfs2/super.c CONFLICT (content): Merge conflict in fs/xfs/linux-2.6/xfs_super.c Applying: v9fs: fixup for inode_setattr being removed Applying: xfs: update tracing for clear_inode to evit_inode transition Applying: cifs: fix for clear_inode -> evict_inode API change Merging pci/linux-next Merging hid/for-next Merging quilt/i2c Merging bjdooks-i2c/next-i2c CONFLICT (content): Merge conflict in arch/arm/plat-omap/i2c.c CONFLICT (content): Merge conflict in drivers/i2c/busses/i2c-cpm.c CONFLICT (content): Merge conflict in drivers/i2c/busses/i2c-mpc.c Merging quilt/jdelvare-hwmon Merging quilt/kernel-doc Merging v4l-dvb/master Merging kbuild/for-next Merging kconfig/for-next Merging ide/master Merging libata/NEXT Merging infiniband/for-next Merging acpi/test Merging idle-test/idle-test Merging ieee1394/for-next Merging ubi/linux-next Merging kvm/linux-next Merging dlm/next Merging ibft/master Merging swiotlb/master Merging scsi/master Merging async_tx/next Merging net/master Merging wireless/master CONFLICT (content): Merge conflict in drivers/net/wireless/iwlwifi/iwl-commands.h Merging mtd/master Merging crypto/master Merging sound/for-next CONFLICT (content): Merge conflict in Documentation/kernel-parameters.txt Merging cpufreq/next Merging quilt/rr CONFLICT (content): Merge conflict in arch/um/drivers/hostaudio_kern.c Merging input/next CONFLICT (add/add): Merge conflict in arch/arm/plat-samsung/include/plat/keypad.h Merging lsm/for-next Merging block/for-next CONFLICT (content): Merge conflict in drivers/block/virtio_blk.c CONFLICT (content): Merge conflict in drivers/scsi/scsi_error.c Merging quilt/device-mapper CONFLICT (content): Merge conflict in drivers/md/dm.c Applying: device-mapper: fix for bio API change Merging embedded/master Merging firmware/master Merging pcmcia/master Merging battery/master Merging leds/for-mm Merging backlight/for-mm Merging kgdb/kgdb-next CONFLICT (content): Merge conflict in kernel/debug/kdb/kdb_main.c Applying: kgdb: partial revert of "kdb: Restore previous sysrq state" Merging slab/for-next Merging uclinux/for-next Merging md/for-next Merging mfd/for-next Merging hdlc/hdlc-next Merging drm/drm-next Merging viafb/viafb-next Merging voltage/for-next Merging security-testing/next Merging lblnet/master Merging agp/agp-next Merging uwb/for-upstream Merging watchdog/master Merging bdev/master Merging dwmw2-iommu/master Merging cputime/cputime Merging osd/linux-next Merging jc_docs/docs-next Merging nommu/master Merging trivial/for-next Merging audit/for-next Merging quilt/aoe Merging suspend/linux-next CONFLICT (content): Merge conflict in drivers/net/wireless/ipw2x00/ipw2100.c Merging bluetooth/master Merging fsnotify/for-next CONFLICT (delete/modify): fs/notify/inotify/inotify.c deleted in fsnotify/for-next and modified in HEAD. Version HEAD of fs/notify/inotify/inotify.c left in tree. $ git rm -f fs/notify/inotify/inotify.c Applying: fsnotify: update gfp/slab.h includes Merging irda/for-next CONFLICT (content): Merge conflict in drivers/net/irda/irda-usb.c Merging catalin/for-next CONFLICT (content): Merge conflict in arch/arm/kernel/entry-armv.S CONFLICT (content): Merge conflict in arch/arm/mm/mmu.c Merging alacrity/linux-next Merging i7core_edac/linux_next CONFLICT (content): Merge conflict in MAINTAINERS Merging devicetree/next-devicetree CONFLICT (content): Merge conflict in arch/sparc/kernel/prom_64.c Merging spi/next-spi Merging limits/writable_limits CONFLICT (content): Merge conflict in arch/x86/ia32/ia32entry.S CONFLICT (content): Merge conflict in arch/x86/include/asm/unistd_32.h CONFLICT (content): Merge conflict in arch/x86/include/asm/unistd_64.h CONFLICT (content): Merge conflict in arch/x86/kernel/syscall_table_32.S CONFLICT (content): Merge conflict in include/asm-generic/unistd.h Merging omap_dss2/for-next Merging xen/upstream/xen $ git reset --hard HEAD^ Merging tip/auto-latest CONFLICT (content): Merge conflict in Makefile Merging edac-amd/for-next Merging oprofile/for-next Merging percpu/for-next Merging workqueues/for-next CONFLICT (content): Merge conflict in fs/cifs/cifsfs.c CONFLICT (content): Merge conflict in fs/cifs/cifsglob.h CONFLICT (content): Merge conflict in fs/cifs/file.c CONFLICT (content): Merge conflict in include/linux/workqueue.h CONFLICT (content): Merge conflict in kernel/trace/Kconfig CONFLICT (content): Merge conflict in kernel/workqueue.c Merging sfi/sfi-test Merging asm-generic/next Merging drivers-x86/linux-next Merging hwpoison/hwpoison CONFLICT (content): Merge conflict in mm/memory-failure.c Merging sysctl/master Merging bkl-core/bkl/core Merging bkl-procfs/bkl/procfs Merging bkl-ioctl/bkl/ioctl Merging quilt/driver-core Merging quilt/tty CONFLICT (content): Merge conflict in include/linux/serial_core.h Merging quilt/usb CONFLICT (content): Merge conflict in drivers/media/video/uvc/uvcvideo.h CONFLICT (content): Merge conflict in include/linux/usb/video.h Merging staging-next/staging-next CONFLICT (content): Merge conflict in drivers/staging/batman-adv/bat_sysfs.c CONFLICT (delete/modify): drivers/staging/batman-adv/device.c deleted in staging-next/staging-next and modified in HEAD. Version HEAD of drivers/staging/batman-adv/device.c left in tree. CONFLICT (content): Merge conflict in drivers/staging/batman-adv/hard-interface.c CONFLICT (delete/modify): drivers/staging/cx25821/cx25821-audups11.c deleted in HEAD and modified in staging-next/staging-next. Version staging-next/staging-next of drivers/staging/cx25821/cx25821-audups11.c left in tree. $ git rm -f drivers/staging/cx25821/cx25821-audups11.c $ git rm -f drivers/staging/batman-adv/device.c Merging slabh/slabh Merging scsi-post-merge/master
Re: linux-next: Tree for July 23 (fscache)
Quoted 3 lines · On Fri, 23 Jul 2010 16:49:31 +1000 Stephen Rothwell wrote:
Hi all,
Changes since 20100722:
when CONFIG_SYSCTL is not enabled:
fs/fscache/main.c:189: error: 'fscache_sysctl_header' undeclared (first use in this function)
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
Intel sound proke in today;s next
Hello,
I just downloaded today's next and built it, then booted. Sound is not working, my card is:
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
I am now booted with latest git kernel and cannot provide more info here, I rebooted with that kernel because I am going to sleep and I like to listen to music by night. If more details is necessary I could boot that next tommorow, but tell me what you need.
Regards,
Piotr Hosowicz
Signature · 6 lines
- Jasiu, jakie jest najszybsze zwierze na swiecie? - Gepard, pszepani. - A najszybszy ptak? - Ptak geparda. NP: - NB: 2.6.35-rc6
Re: Intel sound proke in today;s next
Quoted 10 lines · Piotr Hosowicz
Hello,
I just downloaded today's next and built it, then booted. Sound is not working, my card is:
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
I am now booted with latest git kernel and cannot provide more info here
RC6, sorry
Signature · 5 lines
Z cyklu "Uroki demokracji", czyli pytania i odpowiedzi w teledurniejach: - W którym mieście europejskim powstała pierwsza opera? - Sydney. NP: - NB: 2.6.35-rc6
Re: Intel sound proke in today;s next
In reply to Piotr Hosowicz[Just cc'ing the sound tree contact]
Quoted 26 lines · On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz <[email protected]> wrote:
Hello,
I just downloaded today's next and built it, then booted. Sound is not working, my card is:
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
I am now booted with latest git kernel and cannot provide more info here, I rebooted with that kernel because I am going to sleep and I like to listen to music by night. If more details is necessary I could boot that next tommorow, but tell me what you need.
Regards,
Piotr Hosowicz
Signature · 6 lines
- Jasiu, jakie jest najszybsze zwierze na swiecie? - Gepard, pszepani. - A najszybszy ptak? - Ptak geparda. NP: - NB: 2.6.35-rc6
Signature · 3 lines
Cheers, Stephen Rothwell [email protected] http://www.canb.auug.org.au/~sfr/
Re: Intel sound proke in today;s next
At Sat, 24 Jul 2010 11:59:00 +1000,
Quoted 17 lines · Stephen Rothwell
[Just cc'ing the sound tree contact]
Quoted 13 lines · On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz <[email protected]> wrote:
Hello,
I just downloaded today's next and built it, then booted. Sound is not working, my card is:
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
I am now booted with latest git kernel and cannot provide more info here, I rebooted with that kernel because I am going to sleep and I like to listen to music by night. If more details is necessary I could boot that next tommorow, but tell me what you need.
Make sure that your mixer setup is correct with a new kernel. Usually alsactl restores the right mixer values, though.
At best, run alsa-info.sh (with --no-upload option) on both kernels to compare. Also you can try to pull only sound git tree instead of linux-kernel to identify whether it's a problem in the sound tree or somewhere else. Anyway, see Documentation/sound/alsa/HD-Audio.txt for some details.
thanks,
Takashi
Re: Intel sound proke in today;s next
Quoted 20 lines · Takashi Iwai
At Sat, 24 Jul 2010 11:59:00 +1000,
Quoted 17 lines · Stephen Rothwell
[Just cc'ing the sound tree contact]
Quoted 13 lines · On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz<[email protected]> wrote:
Hello,
I just downloaded today's next and built it, then booted. Sound is not working, my card is:
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
I am now booted with latest git kernel and cannot provide more info here, I rebooted with that kernel because I am going to sleep and I like to listen to music by night. If more details is necessary I could boot that next tommorow, but tell me what you need.
Quoted 8 lines
Make sure that your mixer setup is correct with a new kernel. Usually alsactl restores the right mixer values, though.
At best, run
alsa-info.sh(with --no-upload option) on both kernels to compare. Also you can try to pull only sound git tree instead of linux-kernel to identify whether it's a problem in the sound tree or somewhere else. Anyway, seeDocumentation/sound/alsa/HD-Audio.txtfor some details.
I do not see such script, alsa-info.sh. I dont know how to pull only the sound tree. Tommorrow morning I will check if there is a new main kernel version and build it. Should I expect that there will be a former problem again ? If so I will investigate it deeper.
Regards,
Piotr Hosowicz
Signature · 5 lines
Janusz Korwin-Mikke: "Idiota z dyplomem to taki sam idiota, jak przedtem - tylko z pretensjami." NP: Patrick O'Hearn - Approaching Summit NB: 2.6.35-rc6-git1
Re: Intel sound proke in today;s next
At Sun, 25 Jul 2010 17:56:50 +0200,
Quoted 25 lines · Piotr Hosowicz
Quoted 23 lines · Takashi Iwai
At Sat, 24 Jul 2010 11:59:00 +1000,
Quoted 17 lines · Stephen Rothwell
[Just cc'ing the sound tree contact]
Quoted 13 lines · On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz<[email protected]> wrote:
Hello,
I just downloaded today's next and built it, then booted. Sound is not working, my card is:
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
I am now booted with latest git kernel and cannot provide more info here, I rebooted with that kernel because I am going to sleep and I like to listen to music by night. If more details is necessary I could boot that next tommorow, but tell me what you need.
Make sure that your mixer setup is correct with a new kernel. Usually alsactl restores the right mixer values, though.
Quoted 7 lines
Quoted 5 lines
At best, run
alsa-info.sh(with --no-upload option) on both kernels to compare. Also you can try to pull only sound git tree instead of linux-kernel to identify whether it's a problem in the sound tree or somewhere else. Anyway, seeDocumentation/sound/alsa/HD-Audio.txtfor some details.I do not see such script,
alsa-info.sh.
The location of the script is found in the document mentioned above.
Quoted 2 lines
I dont know how to pull only the
sound tree.
The sound git tree URL is found in the document mentioned above. Just do git-pull onto your cloned Linus tree.
Quoted 3 lines
Tommorrow morning I will check if there is a new main kernel version and build it. Should I expect that there will be a former problem again ? If so I will investigate it deeper.
Honestly, I don't know. There is too little information to analyze...
thanks,
Takashi
Re: Intel sound proke in today;s next
Quoted 35 lines · Takashi Iwai
At Sun, 25 Jul 2010 17:56:50 +0200,
Quoted 25 lines · Piotr Hosowicz
Quoted 23 lines · Takashi Iwai
At Sat, 24 Jul 2010 11:59:00 +1000,
Quoted 17 lines · Stephen Rothwell
[Just cc'ing the sound tree contact]
Quoted 13 lines · On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz<[email protected]> wrote:
Hello,
I just downloaded today's next and built it, then booted. Sound is not working, my card is:
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
I am now booted with latest git kernel and cannot provide more info here, I rebooted with that kernel because I am going to sleep and I like to listen to music by night. If more details is necessary I could boot that next tommorow, but tell me what you need.
Make sure that your mixer setup is correct with a new kernel. Usually alsactl restores the right mixer values, though.
Quoted 7 lines
Quoted 5 lines
At best, run
alsa-info.sh(with --no-upload option) on both kernels to compare. Also you can try to pull only sound git tree instead of linux-kernel to identify whether it's a problem in the sound tree or somewhere else. Anyway, seeDocumentation/sound/alsa/HD-Audio.txtfor some details.I do not see such script,
alsa-info.sh.
Quoted 7 lines
The location of the script is found in the document mentioned above.
Quoted 2 lines
I dont know how to pull only the
sound tree.The sound git tree URL is found in the document mentioned above. Just do git-pull onto your cloned Linus tree.
I don't knmow how to pull _onto_ existing files. git says that it is not a repo and refuses to download files, I thought that first I have to make git clone, but I was happy that it's not like that.
Regards,
Piotr Hosowicz
Signature · 6 lines
Fąfarowie wracają pieszo do domu z opery. W pewnej chwili żona mówi do męża: - Taki wstyd! Jak mogłeś krzyknąć: Brawo! Bis!, gdy primadonna wpadła do kanału dla orkiestry?! NP: Slash - Ghost (Feat. Ian Astbury) NB: 2.6.35-rc6-git1
Re: Intel sound proke in today;s next
At Mon, 26 Jul 2010 18:57:22 +0200,
Quoted 42 lines · Piotr Hosowicz
Quoted 40 lines · Takashi Iwai
At Sun, 25 Jul 2010 17:56:50 +0200,
Quoted 25 lines · Piotr Hosowicz
Quoted 23 lines · Takashi Iwai
At Sat, 24 Jul 2010 11:59:00 +1000,
Quoted 17 lines · Stephen Rothwell
[Just cc'ing the sound tree contact]
Quoted 13 lines · On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz<[email protected]> wrote:
Hello,
I just downloaded today's next and built it, then booted. Sound is not working, my card is:
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
I am now booted with latest git kernel and cannot provide more info here, I rebooted with that kernel because I am going to sleep and I like to listen to music by night. If more details is necessary I could boot that next tommorow, but tell me what you need.
Make sure that your mixer setup is correct with a new kernel. Usually alsactl restores the right mixer values, though.
Quoted 7 lines
Quoted 5 lines
At best, run
alsa-info.sh(with --no-upload option) on both kernels to compare. Also you can try to pull only sound git tree instead of linux-kernel to identify whether it's a problem in the sound tree or somewhere else. Anyway, seeDocumentation/sound/alsa/HD-Audio.txtfor some details.I do not see such script,
alsa-info.sh.The location of the script is found in the document mentioned above.
Quoted 2 lines
I dont know how to pull only the
sound tree.
Quoted 6 lines
Quoted 2 lines
The sound git tree URL is found in the document mentioned above. Just do git-pull onto your cloned Linus tree.
I don't knmow how to pull _onto_ existing files. git says that it is not a repo and refuses to download files, I thought that first I have to make git clone, but I was happy that it's not like that.
First clone, then pull onto it,
% git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
% cd linux-2.6
% git pull git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
Anyway, if your codec is either IDT or STAC codec, try the latest sound git or wait for tomorrow's linux-next tree. A fix regarding the volume was committed today.
Takashi
Re: Intel sound proke in today;s next
Quoted 51 lines · Takashi Iwai
At Mon, 26 Jul 2010 18:57:22 +0200,
Quoted 42 lines · Piotr Hosowicz
Quoted 40 lines · Takashi Iwai
At Sun, 25 Jul 2010 17:56:50 +0200,
Quoted 25 lines · Piotr Hosowicz
Quoted 23 lines · Takashi Iwai
At Sat, 24 Jul 2010 11:59:00 +1000,
Quoted 17 lines · Stephen Rothwell
[Just cc'ing the sound tree contact]
Quoted 13 lines · On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz<[email protected]> wrote:
Hello,
I just downloaded today's next and built it, then booted. Sound is not working, my card is:
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
I am now booted with latest git kernel and cannot provide more info here, I rebooted with that kernel because I am going to sleep and I like to listen to music by night. If more details is necessary I could boot that next tommorow, but tell me what you need.
Make sure that your mixer setup is correct with a new kernel. Usually alsactl restores the right mixer values, though.
Quoted 7 lines
Quoted 5 lines
At best, run
alsa-info.sh(with --no-upload option) on both kernels to compare. Also you can try to pull only sound git tree instead of linux-kernel to identify whether it's a problem in the sound tree or somewhere else. Anyway, seeDocumentation/sound/alsa/HD-Audio.txtfor some details.I do not see such script,
alsa-info.sh.The location of the script is found in the document mentioned above.
Quoted 2 lines
I dont know how to pull only the
sound tree.Quoted 6 lines
Quoted 2 lines
The sound git tree URL is found in the document mentioned above. Just do git-pull onto your cloned Linus tree.
I don't knmow how to pull _onto_ existing files. git says that it is not a repo and refuses to download files, I thought that first I have to make git clone, but I was happy that it's not like that.
Quoted 5 lines
First clone, then pull onto it,
% git clone
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
% cd linux-2.6
% git pullgit://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
This is what I tried but the second git invocation failed saying that thre is no repo info in that directory.
Quoted 3 lines
Anyway, if your codec is either IDT or STAC codec, try the latest sound git or wait for tomorrow's linux-next tree. A fix regarding the volume was committed today.
I bet it is not a problem with volume, because it (fresh from linus repo) prints error messages when loading alsa sound during system start. Something that there is no sound device, as far as I remember.
Regards,
Piotr Hosowicz
Signature · 5 lines
Z cyklu "Uroki demokracji", czyli pytania i odpowiedzi w teledurniejach: - Jaką walutę mają Indie? - Ramadan. NP: Peter Green Splinter Group - Say That You Want To NB: 2.6.35-rc6-git1
Re: Intel sound proke in today;s next
At Mon, 26 Jul 2010 19:33:37 +0200,
Quoted 53 lines · Piotr Hosowicz
Quoted 51 lines · Takashi Iwai
At Mon, 26 Jul 2010 18:57:22 +0200,
Quoted 48 lines · Piotr Hosowicz
Quoted 35 lines · Takashi Iwai
At Sun, 25 Jul 2010 17:56:50 +0200,
Quoted 25 lines · Piotr Hosowicz
Quoted 23 lines · Takashi Iwai
At Sat, 24 Jul 2010 11:59:00 +1000,
Quoted 17 lines · Stephen Rothwell
[Just cc'ing the sound tree contact]
Quoted 13 lines · On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz<[email protected]> wrote:
Hello,
I just downloaded today's next and built it, then booted. Sound is not working, my card is:
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
I am now booted with latest git kernel and cannot provide more info here, I rebooted with that kernel because I am going to sleep and I like to listen to music by night. If more details is necessary I could boot that next tommorow, but tell me what you need.
Make sure that your mixer setup is correct with a new kernel. Usually alsactl restores the right mixer values, though.
Quoted 7 lines
Quoted 5 lines
At best, run
alsa-info.sh(with --no-upload option) on both kernels to compare. Also you can try to pull only sound git tree instead of linux-kernel to identify whether it's a problem in the sound tree or somewhere else. Anyway, seeDocumentation/sound/alsa/HD-Audio.txtfor some details.I do not see such script,
alsa-info.sh.Quoted 7 lines
The location of the script is found in the document mentioned above.
Quoted 2 lines
I dont know how to pull only the
sound tree.The sound git tree URL is found in the document mentioned above. Just do git-pull onto your cloned Linus tree.
I don't knmow how to pull _onto_ existing files. git says that it is not a repo and refuses to download files, I thought that first I have to make git clone, but I was happy that it's not like that.
Quoted 8 lines
Quoted 5 lines
First clone, then pull onto it,
% git clone
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
% cd linux-2.6
% git pullgit://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.gitThis is what I tried but the second git invocation failed saying that thre is no repo info in that directory.
You need to pass the branch. In this case, pass for-next
% git pull git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git for-next
Quoted 7 lines
Quoted 3 lines
Anyway, if your codec is either IDT or STAC codec, try the latest sound git or wait for tomorrow's linux-next tree. A fix regarding the volume was committed today.
I bet it is not a problem with volume, because it (fresh from linus repo) prints error messages when loading alsa sound during system start. Something that there is no sound device, as far as I remember.
With which kernel did it work at all...?
Takashi
Re: Intel sound proke in today;s next
Quoted 57 lines · Takashi Iwai
At Mon, 26 Jul 2010 19:33:37 +0200,
Quoted 55 lines · Piotr Hosowicz
Quoted 53 lines · Takashi Iwai
At Mon, 26 Jul 2010 18:57:22 +0200,
Quoted 42 lines · Piotr Hosowicz
Quoted 40 lines · Takashi Iwai
At Sun, 25 Jul 2010 17:56:50 +0200,
Quoted 25 lines · Piotr Hosowicz
Quoted 23 lines · Takashi Iwai
At Sat, 24 Jul 2010 11:59:00 +1000,
Quoted 17 lines · Stephen Rothwell
[Just cc'ing the sound tree contact]
Quoted 13 lines · On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz<[email protected]> wrote:
Hello,
I just downloaded today's next and built it, then booted. Sound is not working, my card is:
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
I am now booted with latest git kernel and cannot provide more info here, I rebooted with that kernel because I am going to sleep and I like to listen to music by night. If more details is necessary I could boot that next tommorow, but tell me what you need.
Make sure that your mixer setup is correct with a new kernel. Usually alsactl restores the right mixer values, though.
Quoted 7 lines
Quoted 5 lines
At best, run
alsa-info.sh(with --no-upload option) on both kernels to compare. Also you can try to pull only sound git tree instead of linux-kernel to identify whether it's a problem in the sound tree or somewhere else. Anyway, seeDocumentation/sound/alsa/HD-Audio.txtfor some details.I do not see such script,
alsa-info.sh.The location of the script is found in the document mentioned above.
Quoted 2 lines
I dont know how to pull only the
sound tree.Quoted 6 lines
Quoted 2 lines
The sound git tree URL is found in the document mentioned above. Just do git-pull onto your cloned Linus tree.
I don't knmow how to pull _onto_ existing files. git says that it is not a repo and refuses to download files, I thought that first I have to make git clone, but I was happy that it's not like that.
First clone, then pull onto it,
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
% git clone
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
% cd linux-2.6
% git pullgit://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.gitThis is what I tried but the second git invocation failed saying that thre is no repo info in that directory.
You need to pass the branch. In this case, pass for-next
I passed topic/hda and rebuilt the kernel and now everything is working.
Quoted 11 lines
% git pull
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.gitfor-nextQuoted 7 lines
Quoted 3 lines
Anyway, if your codec is either IDT or STAC codec, try the latest sound git or wait for tomorrow's linux-next tree. A fix regarding the volume was committed today.
I bet it is not a problem with volume, because it (fresh from linus repo) prints error messages when loading alsa sound during system start. Something that there is no sound device, as far as I remember.
With which kernel did it work at all...?
Please see attached output from working sound from alsa-info.sh. The version is in the filename.
How shall I know tommorrow when there is a new kernel version that I need to do the git magic again?
Regards and thanks,
Piotr Hosowicz
Signature · 3 lines
Nie pytaj co rząd może zrobić dla ciebie. Pytaj, jak możesz temu zapobiec. NP: Peter Green Splinter Group - Tribal Dance NB: 2.6.35-rc6-20100726-1827-sndfix+
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.59
!!################################
!!Script ran on: Mon Jul 26 18:10:49 UTC 2010
!!Linux Distribution
!!------------------
Debian GNU/Linux squeeze/sid \n \l
!!DMI Information
!!---------------
Manufacturer: Gigabyte Technology Co., Ltd. Product Name: EP45-UD3
!!Kernel Information
!!------------------
Kernel release: 2.6.35-rc6-git1 Operating System: GNU/Linux Architecture: x86_64 Processor: unknown SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.23 Library version: 1.0.23 Utilities version: 1.0.23
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
aRts:
Installed - Yes (/usr/bin/artsd)
Running - No
!!Soundcards recognised by ALSA
!!-----------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xeb200000 irq 45
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
!!Advanced information - PCI Vendor/Device/Susbsystem ID's !!--------------------------------------------------------
00:1b.0 0403: 8086:3a3e
Subsystem: 1458:a002
!!Modprobe options (Sound related)
!!--------------------------------
snd-atiixp-modem: index=-2
snd-intel8x0m: index=-2
snd-via82xx-modem: index=-2
snd-pcsp: index=-2
snd-usb-audio: index=-2
!!Loaded sound module options
!!--------------------------
!!Module: snd_hda_intel
bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Realtek ALC889A
Address: 2
Function Id: 0x1
Vendor Id: 0x10ec0885
Subsystem Id: 0x1458a102
Revision Id: 0x100101
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x11: Stereo
Device: name="ALC889A Analog", type="Audio", device=0
Converter: stream=5, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x11: Stereo
Converter: stream=5, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Audio Output] wcaps 0x11: Stereo
Converter: stream=5, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x05 [Audio Output] wcaps 0x11: Stereo
Converter: stream=5, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCMNode 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Device: name="ALC889A Digital", type="SPDIF", device=1
Converter: stream=5, channel=0
Digital: Enabled
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCMNode 0x07 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Control: name="Capture Switch", index=0, device=0
Control: name="Capture Volume", index=0, device=0
Device: name="ALC889A Analog", type="Audio", device=0 Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Connection: 1
0x24Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Control: name="Capture Switch", index=1, device=0
Control: name="Capture Volume", index=1, device=0
Device: name="ALC889A Analog", type="Audio", device=2 Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Connection: 1
0x23Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Control: name="Capture Switch", index=2, device=0
Control: name="Capture Volume", index=2, device=0 Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Connection: 1
0x22Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
Control: name="IEC958 Capture Switch", index=0, device=0
Control: name="IEC958 Capture Default", index=0, device=0
Device: name="ALC889A Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Unsolicited: tag=00, enabled=0
Connection: 1
0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="CD Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Control: name="CD Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Control: name="Line Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Line Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Front Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Front Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x17 0x17] [0x97 0x97] [0x17 0x17] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97]
Connection: 10
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Control: name="Front Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x31 0x31]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Control: name="Surround Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Control: name="Center Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="LFE Playback Volume", index=0, device=0
ControlAmp: chs=2, dir=Out, idx=0, ofs=0
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Control: name="Side Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x05 0x0bNode 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x01014410: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x01011412: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0x2
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c 0x0d* 0x0e 0x0f 0x26Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0000003c: IN OUT HP Detect
Pin Default 0x01016411: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Orange
DefAssociation = 0x1, Sequence = 0x1
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c 0x0d 0x0e* 0x0f 0x26
Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0000003c: IN OUT HP Detect
Pin Default 0x01012414: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Grey
DefAssociation = 0x1, Sequence = 0x4
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c 0x0d 0x0e 0x0f* 0x26
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Control: name="Mic Boost", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x01a19c40: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Control: name="Front Mic Boost", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x02a19c50: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0x5, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x0181344f: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0x4, Sequence = 0xf
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x02214c20: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x593301f0: [N/A] CD at Int ATAPI
Conn = ATAPI, Color = Unknown DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x4005e601: [N/A] Line Out at Ext N/A
Conn = Optical, Color = White DefAssociation = 0x0, Sequence = 0x1
Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
Pincap 0x00000010: OUT
Pin Default 0x014b6130: [Jack] SPDIF Out at Ext Rear
Conn = Comb, Color = Orange DefAssociation = 0x3, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x06
Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
Pincap 0x00000020: IN
Pin Default 0x01cb7160: [Jack] SPDIF In at Ext Rear
Conn = Comb, Color = Yellow
DefAssociation = 0x6, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=17
Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono
Volume-Knob: delta=0, steps=32, direct=0, val=0
Unsolicited: tag=00, enabled=0
Connection: 0
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Input Source", index=2, device=0
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Input Source", index=1, device=0
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x24 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Input Source", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x25 [Audio Output] wcaps 0x11: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCMNode 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40]
Connection: 2
0x25 0x0b
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 9 Jul 26 19:20 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 8 Jul 26 19:20 /dev/snd/pcmC0D0c crw-rw----+ 1 root audio 116, 7 Jul 26 20:02 /dev/snd/pcmC0D0p crw-rw----+ 1 root audio 116, 6 Jul 26 19:20 /dev/snd/pcmC0D1c crw-rw----+ 1 root audio 116, 5 Jul 26 19:20 /dev/snd/pcmC0D1p crw-rw----+ 1 root audio 116, 4 Jul 26 19:20 /dev/snd/pcmC0D2c crw-rw----+ 1 root audio 116, 3 Jul 26 19:20 /dev/snd/seq crw-rw----+ 1 root audio 116, 2 Jul 26 19:20 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Jul 26 19:20 .
drwxr-xr-x 3 root root 220 Jul 26 19:20 ..
lrwxrwxrwx 1 root root 12 Jul 26 19:20 pci-0000:00:1b.0 -> ../controlC0
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 2: ALC889A Analog [ALC889A Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0xeb200000 irq 45'
Mixer name : 'Realtek ALC889A'
Components : 'HDA:10ec0885,1458a102,00100101'
Controls : 42
Simple ctrls : 24
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 51 [80%] [-13.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pswitch penum
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [off]
Front Right: Playback [off]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 89 [35%] [-33.20dB]
Front Right: Playback 89 [35%] [-33.20dB]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 62 [97%] [-2.00dB] [on]
Front Right: Playback 62 [97%] [-2.00dB] [on]
Simple mixer control 'Front Mic',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Front Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%]
Front Right: 0 [0%]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 0 [0%] [-64.00dB] [off]
Front Right: Playback 0 [0%] [-64.00dB] [off]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 0 [0%] [-64.00dB] [off]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 0 [0%] [-64.00dB] [off]
Simple mixer control 'Side',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 0 [0%] [-64.00dB] [off]
Front Right: Playback 0 [0%] [-64.00dB] [off]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 23 [74%] [0.00dB] [on]
Front Right: Playback 23 [74%] [0.00dB] [on]
Simple mixer control 'CD',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 23 [74%] [0.00dB] [on]
Front Right: Playback 23 [74%] [0.00dB] [on]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%]
Front Right: 0 [0%]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined cswitch cswitch-joined penum Playback channels: Mono
Capture channels: Mono
Mono: Playback [on] Capture [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 46
Front Left: Capture 0 [0%] [-16.00dB] [off]
Front Right: Capture 0 [0%] [-16.00dB] [off]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 46
Front Left: Capture 0 [0%] [-16.00dB] [off]
Front Right: Capture 0 [0%] [-16.00dB] [off]
Simple mixer control 'Capture',2
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 46
Front Left: Capture 0 [0%] [-16.00dB] [off]
Front Right: Capture 0 [0%] [-16.00dB] [off]
Simple mixer control 'Channel Mode',0
Capabilities: enum
Items: '6ch' '8ch'
Item0: '6ch'
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 60 [50%] [0.00dB]
Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Line' 'CD'
Item0: 'Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Line' 'CD'
Item0: 'Mic'
Simple mixer control 'Input Source',2
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Line' 'CD'
Item0: 'Mic'
!!Alsactl output
!!-------------
--startcollapse--
state.Intel {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
comment.dbmin -6400
comment.dbmax 0
iface MIXER
name 'Front Playback Volume'
value.0 62
value.1 62
}
control.2 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Front Playback Switch'
value.0 true
value.1 true
}
control.3 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
comment.dbmin -6400
comment.dbmax 0
iface MIXER
name 'Surround Playback Volume'
value.0 0
value.1 0
}
control.4 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Surround Playback Switch'
value.0 false
value.1 false
}
control.5 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 64'
comment.dbmin -6400
comment.dbmax 0
iface MIXER
name 'Center Playback Volume'
value 0
}
control.6 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 64'
comment.dbmin -6400
comment.dbmax 0
iface MIXER
name 'LFE Playback Volume'
value 0
}
control.7 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Center Playback Switch'
value false
}
control.8 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'LFE Playback Switch'
value false
}
control.9 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
comment.dbmin -6400
comment.dbmax 0
iface MIXER
name 'Side Playback Volume'
value.0 0
value.1 0
}
control.10 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Side Playback Switch'
value.0 false
value.1 false
}
control.11 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Headphone Playback Switch'
value.0 false
value.1 false
}
control.12 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'CD Playback Volume'
value.0 23
value.1 23
}
control.13 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'CD Playback Switch'
value.0 true
value.1 true
}
control.14 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'Line Playback Volume'
value.0 23
value.1 23
}
control.15 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Line Playback Switch'
value.0 true
value.1 true
}
control.16 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'Mic Playback Volume'
value.0 0
value.1 0
}
control.17 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 3'
comment.dbmin 0
comment.dbmax 3000
iface MIXER
name 'Mic Boost'
value.0 0
value.1 0
}
control.18 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Mic Playback Switch'
value.0 false
value.1 false
}
control.19 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -3450
comment.dbmax 1200
iface MIXER
name 'Front Mic Playback Volume'
value.0 0
value.1 0
}
control.20 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 3'
comment.dbmin 0
comment.dbmax 3000
iface MIXER
name 'Front Mic Boost'
value.0 0
value.1 0
}
control.21 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Front Mic Playback Switch'
value.0 false
value.1 false
}
control.22 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 '6ch'
comment.item.1 '8ch'
iface MIXER
name 'Channel Mode'
value '6ch'
}
control.23 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
value.0 false
value.1 false
}
control.24 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
index 1
value.0 false
value.1 false
}
control.25 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
index 2
value.0 false
value.1 false
}
control.26 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 46'
comment.dbmin -1600
comment.dbmax 3000
iface MIXER
name 'Capture Volume'
value.0 0
value.1 0
}
control.27 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 46'
comment.dbmin -1600
comment.dbmax 3000
iface MIXER
name 'Capture Volume'
index 1
value.0 0
value.1 0
}
control.28 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 46'
comment.dbmin -1600
comment.dbmax 3000
iface MIXER
name 'Capture Volume'
index 2
value.0 0
value.1 0
}
control.29 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic
comment.item.1 'Front Mic'
comment.item.2 Line
comment.item.3 CD
iface MIXER
name 'Input Source'
value Mic
}
control.30 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic
comment.item.1 'Front Mic'
comment.item.2 Line
comment.item.3 CD
iface MIXER
name 'Input Source'
index 1
value Mic
}
control.31 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic
comment.item.1 'Front Mic'
comment.item.2 Line
comment.item.3 CD
iface MIXER
name 'Input Source'
index 2
value Mic
}
control.32 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.33 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.34 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.35 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value true
}
control.36 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
}
control.37 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Capture Switch'
value false
}
control.38 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Capture Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.39 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 64'
comment.dbmin -6400
comment.dbmax 0
iface MIXER
name 'Master Playback Volume'
value 51
}
control.40 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Master Playback Switch'
value true
}
control.41 {
comment.access 'read write user'
comment.type INTEGER
comment.count 2
comment.range '0 - 255'
comment.tlv '0000000100000008ffffec1400000014'
comment.dbmin -5100
comment.dbmax 0
iface MIXER
name 'PCM Playback Volume'
value.0 89
value.1 89
}
control.42 {
comment.access 'read write user'
comment.type INTEGER
comment.count 2
comment.range '0 - 120'
comment.tlv '0000000100000008fffff44800000032'
comment.dbmin -3000
comment.dbmax 3000
iface MIXER
name 'Digital Capture Volume'
value.0 60
value.1 60
}
}--endcollapse--
!!All Loaded Modules
!!------------------
Module
ppdev
lp
sco
bridge
stp
bnep
rfcomm
l2cap
bluetooth
rfkill
ipv6xt_ownernf_conntrack_ftpxt_statext_tcpudpipt_MASQUERADEiptable_natnf_natnf_conntrack_ipv4nf_conntracknf_defrag_ipv4iptable_filterip_tablesipt_REJECTx_tables
ext3
jbd
fuse
coretemp
it87hwmon_vid
sbp2
loop
nvidiasnd_hda_codec_realteksnd_hda_intelsnd_hda_codecsnd_pcm_osssnd_mixer_osssnd_pcmsnd_seq_dummysnd_seq_osssnd_seq_midisnd_rawmidisnd_seq_midi_eventsnd_seqi2c_i801snd_timersnd_seq_devicei2c_core
sndintel_agp
psmouseserio_raw
evdev
pcspkrparport_pc
soundcoresnd_page_alloc
parport
button
processor
ext4
mbcache
jbd2
crc16
sgsr_modsd_mod
cdrom
ahci
libahciata_genericata_piix
libatauhci_hcd
ohci1394scsi_mod
jmicron
floppyide_pci_generic
ieee1394
r8169
thermal
miithermal_syside_coreehci_hcd
!!ALSA/HDA dmesg
!!------------------
[ 5.385246] alloc kstat_irqs on node -1 [ 5.385254] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 5.385351] alloc irq_desc for 45 on node -1 [ 5.385354] alloc kstat_irqs on node -1 [ 5.385363] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 5.385389] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 5.385393] ALSA sound/pci/hda/hda_intel.c:2516: chipset global capabilities = 0x4401 [ 5.417517] ALSA sound/pci/hda/hda_intel.c:907: codec_mask = 0x4 [ 5.417588] ALSA sound/pci/hda/hda_intel.c:1345: codec #2 probed OK [ 5.443744] ALSA sound/pci/hda/patch_realtek.c:1308: SKU: Nid=0x1d sku_cfg=0x4005e601 [ 5.443749] ALSA sound/pci/hda/patch_realtek.c:1310: SKU: port_connectivity=0x1 [ 5.443752] ALSA sound/pci/hda/patch_realtek.c:1311: SKU: enable_pcbeep=0x0 [ 5.443754] ALSA sound/pci/hda/patch_realtek.c:1312: SKU: check_sum=0x00000005 [ 5.443757] ALSA sound/pci/hda/patch_realtek.c:1313: SKU: customization=0x000000e6 [ 5.443760] ALSA sound/pci/hda/patch_realtek.c:1314: SKU: external_amp=0x0 [ 5.443762] ALSA sound/pci/hda/patch_realtek.c:1315: SKU: platform_type=0x0 [ 5.443765] ALSA sound/pci/hda/patch_realtek.c:1316: SKU: swap=0x0 [ 5.443767] ALSA sound/pci/hda/patch_realtek.c:1317: SKU: override=0x1 [ 5.443770] ALSA sound/pci/hda/hda_codec.c:3544: hda_codec: model '6stack-dig' is selected for config 1458:a002 (Gigabyte P35 DS3R) [ 5.443828] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 5.446363] ALSA sound/pci/hda/hda_codec.c:2008: Cannot find slave Headphone Playback Volume, skipped [ 5.446367] ALSA sound/pci/hda/hda_codec.c:2008: Cannot find slave Speaker Playback Volume, skipped [ 5.446370] ALSA sound/pci/hda/hda_codec.c:2008: Cannot find slave Mono Playback Volume, skipped [ 5.446373] ALSA sound/pci/hda/hda_codec.c:2008: Cannot find slave Line-Out Playback Volume, skipped [ 5.446376] ALSA sound/pci/hda/hda_codec.c:2008: Cannot find slave PCM Playback Volume, skipped [ 5.446388] ALSA sound/pci/hda/hda_codec.c:2008: Cannot find slave Speaker Playback Switch, skipped [ 5.446391] ALSA sound/pci/hda/hda_codec.c:2008: Cannot find slave Mono Playback Switch, skipped [ 5.446396] ALSA sound/pci/hda/hda_codec.c:2008: Cannot find slave Line-Out Playback Switch, skipped [ 5.446399] ALSA sound/pci/hda/hda_codec.c:2008: Cannot find slave PCM Playback Switch, skipped [ 6.089110] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 -- [ 24.854960] i2c i2c-6: adapter [NVIDIA i2c adapter ] registered [ 60.278755] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x6 [ 60.282271] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0xa [ 60.400209] ALSA sound/pci/hda/hda_intel.c:1668: azx_pcm_prepare: bufsize=0x10000, format=0x31 [ 60.400224] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x31 [ 60.408037] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31 [ 60.416023] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31 [ 60.424027] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31 [ 60.432023] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31 [ 60.441301] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x2 [ 60.441306] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x3 [ 60.441310] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x4 [ 60.441313] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x5 [ 60.441318] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x6 [ 60.777175] ALSA sound/pci/hda/hda_intel.c:1668: azx_pcm_prepare: bufsize=0x10000, format=0x31 [ 60.777188] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x31 [ 60.788026] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31 [ 60.796026] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31 [ 60.804022] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31 [ 60.812018] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31 [ 60.820842] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x2 [ 60.820847] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x3 [ 60.820850] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x4 [ 60.820854] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x5 [ 60.820857] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x6 [ 60.821860] ALSA sound/pci/hda/hda_intel.c:1668: azx_pcm_prepare: bufsize=0x10000, format=0x31 [ 60.821871] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x31 [ 60.828520] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31 [ 60.836520] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31 [ 60.844514] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31 [ 60.852520] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31 [ 60.860862] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x2 [ 60.860866] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x3 [ 60.860870] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x4 [ 60.860873] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x5 [ 60.860876] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x6 [ 62.695984] ALSA sound/pci/hda/hda_intel.c:1668: azx_pcm_prepare: bufsize=0x10000, format=0x31 [ 62.695996] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x31 [ 62.705014] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31 [ 62.713155] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31 [ 62.721522] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31 [ 62.729516] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31 [ 71.099607] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x2 [ 71.099614] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x3 [ 71.099618] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x4 [ 71.099621] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x5 [ 71.099625] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x6 [ 94.300938] ALSA sound/pci/hda/hda_intel.c:1668: azx_pcm_prepare: bufsize=0x10000, format=0x31 [ 94.300950] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x31 [ 94.312021] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31 [ 94.320017] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31 [ 94.328049] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31 [ 94.336011] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31 [ 94.344618] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x2 [ 94.344622] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x3 [ 94.344626] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x4 [ 94.344629] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x5 [ 94.344632] ALSA sound/pci/hda/hda_codec.c:1202: hda_codec_cleanup_stream: NID=0x6 [ 106.605272] ALSA sound/pci/hda/hda_intel.c:1668: azx_pcm_prepare: bufsize=0x10000, format=0x31 [ 106.605345] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x31 [ 106.612516] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x31 [ 106.620513] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31 [ 106.628519] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x31 [ 106.636514] ALSA sound/pci/hda/hda_codec.c:1184: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x31
Re: Intel sound proke in today;s next
Quoted 74 lines · Piotr Hosowicz
Quoted 73 lines · Takashi Iwai
At Mon, 26 Jul 2010 19:33:37 +0200,
Quoted 71 lines · Piotr Hosowicz
Quoted 68 lines · Takashi Iwai
At Mon, 26 Jul 2010 18:57:22 +0200,
Quoted 51 lines · Piotr Hosowicz
Quoted 49 lines · Takashi Iwai
At Sun, 25 Jul 2010 17:56:50 +0200,
Quoted 40 lines · Piotr Hosowicz
Quoted 29 lines · Takashi Iwai
At Sat, 24 Jul 2010 11:59:00 +1000,
Quoted 23 lines · Stephen Rothwell
[Just cc'ing the sound tree contact]
Quoted 18 lines · On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz<[email protected]> wrote:
Hello,
I just downloaded today's next and built it, then booted. Sound is not
working, my card is:00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
ControllerI am now booted with latest git kernel and cannot provide more info
here, I rebooted with that kernel because I am going to sleep and I like
to listen to music by night. If more details is necessary I could boot
that next tommorow, but tell me what you need.Make sure that your mixer setup is correct with a new kernel. Usually alsactl restores the right mixer values, though.
Quoted 8 lines
At best, run
alsa-info.sh(with --no-upload option) on both kernels to
compare. Also you can try to pull only sound git tree instead of linux-kernel to identify whether it's a problem in the sound tree or
somewhere else. Anyway, seeDocumentation/sound/alsa/HD-Audio.txtfor
some details.Quoted 1 line
I do not see such script,
alsa-info.sh.The location of the script is found in the document mentioned above.
Quoted 2 lines
I dont know how to pull only the
sound tree.Quoted 7 lines
Quoted 2 lines
The sound git tree URL is found in the document mentioned above. Just do git-pull onto your cloned Linus tree.
I don't knmow how to pull _onto_ existing files. git says that it is not
a repo and refuses to download files, I thought that first I have to make git clone, but I was happy that it's not like that.First clone, then pull onto it,
% git clone
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
% cd linux-2.6
% git pullgit://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
This is what I tried but the second git invocation failed saying that thre is no repo info in that directory.
You need to pass the branch. In this case, pass for-next
I passed topic/hda and rebuilt the kernel and now everything is working.
I have just git pulled for-next and saw many files downloaded so I wonder how synced with topic/hda it's working.
Regards,
Piotr Hosowicz
Signature · 4 lines
Zawartość usunięta. Państwowy Urząd Kontroli Sygnaturek NP: Peter Green Splinter Group - There's A River NB: 2.6.35-rc6-20100726-1827-sndfix+
Re: Intel sound proke in today;s next
At Mon, 26 Jul 2010 21:03:32 +0200,
Quoted 79 lines · Piotr Hosowicz
Quoted 77 lines · Piotr Hosowicz
Quoted 76 lines · Takashi Iwai
At Mon, 26 Jul 2010 19:33:37 +0200,
Quoted 73 lines · Piotr Hosowicz
Quoted 61 lines · Takashi Iwai
At Mon, 26 Jul 2010 18:57:22 +0200,
Quoted 51 lines · Piotr Hosowicz
Quoted 49 lines · Takashi Iwai
At Sun, 25 Jul 2010 17:56:50 +0200,
Quoted 40 lines · Piotr Hosowicz
Quoted 29 lines · Takashi Iwai
At Sat, 24 Jul 2010 11:59:00 +1000,
Quoted 23 lines · Stephen Rothwell
[Just cc'ing the sound tree contact]
Quoted 18 lines · On Fri, 23 Jul 2010 20:24:36 +0200 Piotr Hosowicz<[email protected]> wrote:
Hello,
I just downloaded today's next and built it, then booted. Sound is not
working, my card is:00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
ControllerI am now booted with latest git kernel and cannot provide more info
here, I rebooted with that kernel because I am going to sleep and I like
to listen to music by night. If more details is necessary I could boot
that next tommorow, but tell me what you need.Make sure that your mixer setup is correct with a new kernel. Usually alsactl restores the right mixer values, though.
Quoted 8 lines
At best, run
alsa-info.sh(with --no-upload option) on both kernels to
compare. Also you can try to pull only sound git tree instead of linux-kernel to identify whether it's a problem in the sound tree or
somewhere else. Anyway, seeDocumentation/sound/alsa/HD-Audio.txtfor
some details.Quoted 1 line
I do not see such script,
alsa-info.sh.The location of the script is found in the document mentioned above.
Quoted 2 lines
I dont know how to pull only the
sound tree.Quoted 7 lines
Quoted 2 lines
The sound git tree URL is found in the document mentioned above. Just do git-pull onto your cloned Linus tree.
I don't knmow how to pull _onto_ existing files. git says that it is not
a repo and refuses to download files, I thought that first I have to make git clone, but I was happy that it's not like that.Quoted 7 lines
First clone, then pull onto it,
% git clone
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
% cd linux-2.6
% git pullgit://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.gitThis is what I tried but the second git invocation failed saying that thre is no repo info in that directory.
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
You need to pass the branch. In this case, pass for-next
I passed topic/hda and rebuilt the kernel and now everything is working.
I have just git pulled for-next and saw many files downloaded so I wonder how synced with topic/hda it's working.
It contains other two branches, topic/misc and topic/asoc. (Also sometimes missing fix/asoc and fix/misc merges).
topic/asoc branch is specific to ASoC, so very likely irrelevant. If any, some changes in the sound core code in topic/misc might influence in your case...
Takashi
Re: Intel sound proke in today;s next
Quoted 7 lines · Takashi Iwai
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
You need to pass the branch. In this case, pass for-next
I passed topic/hda and rebuilt the kernel and now everything is working.
I have just git pulled for-next and saw many files downloaded so I wonder how synced with topic/hda it's working.
Quoted 6 lines
It contains other two branches, topic/misc and topic/asoc. (Also sometimes missing fix/asoc and fix/misc merges).
topic/asoc branch is specific to ASoC, so very likely irrelevant. If any, some changes in the sound core code in topic/misc might influence in your case...
Ok, so I'll use for-next then. Thank you again, you taught me a lot.
Regards,
Piotr Hosowicz
Signature · 5 lines
Zatrzymuje się samochód na sejmowym parkingu. Podchodzi do niego ochroniarz i mówi: - Pan tu parkuje?! Tu Sejm ... Ministrowie, politycy, posłowiei ... - Dzięki, włączę alarm. NP: Patrick O'Hearn - Magnificent River NB: 2.6.35-rc6-20100726-1827-sndfix+
Re: Intel sound proke in today;s next
At Mon, 26 Jul 2010 22:54:42 +0200,
Quoted 10 lines · Piotr Hosowicz
Quoted 7 lines · Takashi Iwai
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
You need to pass the branch. In this case, pass for-next
I passed topic/hda and rebuilt the kernel and now everything is working.
I have just git pulled for-next and saw many files downloaded so I wonder how synced with topic/hda it's working.
Quoted 8 lines
Quoted 6 lines
It contains other two branches, topic/misc and topic/asoc. (Also sometimes missing fix/asoc and fix/misc merges).
topic/asoc branch is specific to ASoC, so very likely irrelevant. If any, some changes in the sound core code in topic/misc might influence in your case...
Ok, so I'll use for-next then. Thank you again, you taught me a lot.
I guess you hit the regression fixed right now, so slipped from today's linux-next. The patch is below.
(The reason why topic/hda branch worked is that I pulled the changes
to topic/misc branch from Jaroslav's tree because his branch contains more other changes than HD-audio specific. And I forgot about this commit until today, grrr.)
thanks,
Takashi
---
Quoted 1 line
From
1a9bbe35dd5c0d0d6322d828779c2abbdd927340Mon Sep 17 00:00:00 2001
From: David Henningsson <[email protected]>
Date: Tue, 27 Jul 2010 00:10:34 +0200
Subject: [PATCH] ALSA: hda: Fixup commit 79c944ad (caused codec initialization failure)
Commit 79c944ad caused codecs not to be detected in some cases, found on several Realtek codecs.
--- sound/pci/hda/hda_codec.c | 13 +++++++------ 1 files changed, 7 insertions(+), 6 deletions(-)
sound/pci/hda/hda_codec.c +7 -6
@@ -724,23 +724,24 @@ static int get_codec_name(struct hda_codec *codec)*/ static void /*__devinit*/ setup_fg_nodes (struct hda_codec *codec) { -int i, total_nodes, function_id; +int i, total_nodes, function_id, param_val;hda_nid_t nid; total_nodes =snd_hda_get_sub_nodes (codec,AC_NODE_ROOT , &nid);for (i =0 ; i < total_nodes; i++, nid++) { - function_id =snd_hda_param_read (codec, nid, + param_val =snd_hda_param_read (codec, nid,AC_PAR_FUNCTION_TYPE ); + function_id = param_val &0xff ;switch (function_id) {case AC_GRP_AUDIO_FUNCTION : codec->afg = nid; - codec->afg_function_id = function_id &0xff ; - codec->afg_unsol = (function_id >>8 ) &1 ; + codec->afg_function_id = function_id; + codec->afg_unsol = (param_val >>8 ) &1 ;break ;case AC_GRP_MODEM_FUNCTION : codec->mfg = nid; - codec->mfg_function_id = function_id &0xff ; - codec->mfg_unsol = (function_id >>8 ) &1 ; + codec->mfg_function_id = function_id; + codec->mfg_unsol = (param_val >>8 ) &1 ;break ;default :break ;
Signature · 1 line
1.7.2
PATCH 1/1 fscache: fix build on !CONFIG_SYSCTL
In reply to Randy DunlapCommit 8b8edefa (fscache: convert object to use workqueue instead of slow-work) made fscache_exit() call unregister_sysctl_table() unconditionally breaking build when sysctl is disabled. Fix it by putting it inside CONFIG_SYSCTL.
---
This should fix it. Thanks.
fs/fscache/main.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
fs/fscache/main.c +2 -0
@@ -186,7 +186,9 @@ static void __exit fscache_exit(void)kobject_put (fscache_root);kmem_cache_destroy (fscache_cookie_jar); +#ifdef CONFIG_SYSCTL unregister_sysctl_table (fscache_sysctl_header); +#endif fscache_proc_cleanup ();destroy_workqueue (fscache_op_wq);destroy_workqueue (fscache_object_wq);
Signature · 1 line
1.7.1
Re: [PATCH wq#for-next] fscache: fix build on !CONFIG_SYSCTL
Quoted 10 lines · Tejun Heo
Commit
8b8edefa(fscache: convert object to use workqueue instead of slow-work) madefscache_exit()callunregister_sysctl_table()unconditionally breaking build when sysctl is disabled. Fix it by putting it insideCONFIG_SYSCTL.Signed-off-by Tejun Heo <[email protected]>Reported-by Randy Dunlap <[email protected]>Cc David Howells <[email protected]>---
This should fix it. Thanks.
Ack. Thanks.
Quoted 18 lines
fs/fscache/main.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)fs/fscache/main.c +2
-0@@ -186,7 +186,9 @@ static void __exit fscache_exit(void)kobject_put (fscache_root);kmem_cache_destroy (fscache_cookie_jar); +#ifdef CONFIG_SYSCTL unregister_sysctl_table (fscache_sysctl_header); +#endif fscache_proc_cleanup ();destroy_workqueue (fscache_op_wq);destroy_workqueue (fscache_object_wq);
Signature · 2 lines
~Randy *** Remember to use Documentation/SubmitChecklist when testing your code ***
PATCH 1/1 compal-laptop: depends on POWER_SUPPLY
In reply to Stephen RothwellFrom: Randy Dunlap <[email protected]>
compal-laptop uses power_supply interfaces so it should depend on POWER_SUPPLY.
ERROR: "power_supply_register" [drivers/platform/x86/compal-laptop.ko] undefined!
ERROR: "power_supply_unregister" [drivers/platform/x86/compal-laptop.ko] undefined!
--- drivers/platform/x86/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/platform/x86/Kconfig +1 -0
@@ -183,6 +183,7 @@ config COMPAL_LAPTOP depends on BACKLIGHT_CLASS_DEVICE depends on RFKILL depends on HWMON + depends on POWER_SUPPLY ---help--- This is a driver for laptops built by Compal: