unable to replace defect raid1 device

on Ubuntu 10.10 alpha with btrfs 0.19 and a 2.6.35 (2.6.35-12-generic #17-Ubuntu SMP Mon Jul 26 18:48:06)

I created a btrfs raid 1 system:

# mkfs.btrfs -d raid1 -m raid1 /dev/sdb1 /dev/sdc1

Then I rebooted without disk 3 (/dev/sdc). I was able to mount the btrfs with mount -o degraded.

However, I was not able to remove the defect device.

# btrfs device delete /dev/sdc1
ERROR: error removing the device '/dev/sdc1'
# dmesg | tail
...
[  110.524145] btrfs: allowing degraded mounts
[  439.104487] btrfs: unable to go below two devices on raid1

I was able to add a new device (again /dev/sdc1, but on another disk), but apparently it was not used as a raid1 device:

# btrfs de add /dev/sdc1 /media/btrfs/
# btrfs fi sh
Label: none  uuid: dc691a5d-187e-4cb4-a94a-d12dabdffde4
   Total devices 3 FS bytes used 3.76GB
   devid    1 size 8.00GB used 5.35GB path /dev/sdb1
   devid    3 size 8.00GB used 0.00 path /dev/sdc1
   *** Some devices missing

Is there a way to replace a defect raid1 device as with mdadm? Or is this not yet implemented in btrfs?

Best wishes,

Michael Kofler
--
To unsubscribe from this list: send the line "unsubscribe linux- btrfs" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html