[LTP] LTP-20100630:POWER_MANAGEMENT runpwtests.sh fails.

Gurudas Pai

author

2010-07-30 05:59 UTC #0 lore raw

Hi There,

I am using LTP-20100630 , and while running POWER_MANAGEMENT test I get following errors,

/opt/ltp/testcases/bin/runpwtests.sh: line 201: get_sched_values:
command not found

Change log shows get_sched_values.c is removed.

92) Log Message:
1. Remove the .c files and all calls in runpwtests.sh because we can achieve the same thing through additional shell test logic.
2. Add the apicmds dependency.

Signed-off-by Garrett Cooper <[email protected]>

Modified Files:
ltp/testcases/kernel/power_management/Makefile ltp/testcases/kernel/power_management/runpwtests.sh Removed Files:
ltp/testcases/kernel/power_management/check_kv_arch.c ltp/testcases/kernel/power_management/get_sched_values.c

So how could I fix this issue.

Thanks,
-guru

------------------------------------------------------------------------------
The Palm PDK Hot Apps Program offers developers who use the Plug-In Development Kit to bring their C/C++ apps to Palm for a share of $1 Million in cash or HP Products. Visit us here for more details:
http://p.sf.net/sfu/dev2dev-palm
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

Garrett Cooper

2010-08-02 06:18 UTC #1 lore raw

Quoted 9 lines · Gurudas Pai

Hi There,
I am using LTP-20100630 , and while running POWER_MANAGEMENT test I get following errors,
/opt/ltp/testcases/bin/runpwtests.sh: line 201: get_sched_values:
command not found

Quoted 6 lines

Change log shows get_sched_values.c is removed.
92) Log Message:
1. Remove the .c files and all calls in runpwtests.sh because we can achieve the same thing through additional shell test logic.
2. Add the apicmds dependency.

File restored.
Thanks,
-Garrett

------------------------------------------------------------------------------
The Palm PDK Hot Apps Program offers developers who use the Plug-In Development Kit to bring their C/C++ apps to Palm for a share of $1 Million in cash or HP Products. Visit us here for more details:
http://p.sf.net/sfu/dev2dev-palm
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

Garrett Cooper

2010-08-02 06:20 UTC #2 lore raw

Quoted 10 lines · Garrett Cooper

Quoted 9 lines · Gurudas Pai
Hi There,
I am using LTP-20100630 , and while running POWER_MANAGEMENT test I get following errors,
/opt/ltp/testcases/bin/runpwtests.sh: line 201: get_sched_values:
command not found

Quoted 8 lines

Quoted 6 lines
Change log shows get_sched_values.c is removed.
92) Log Message:
1. Remove the .c files and all calls in runpwtests.sh because we can achieve the same thing through additional shell test logic.
2. Add the apicmds dependency.
File restored.

Except the file already existed... did you run make in the directory?

------------------------------------------------------------------------------
The Palm PDK Hot Apps Program offers developers who use the Plug-In Development Kit to bring their C/C++ apps to Palm for a share of $1 Million in cash or HP Products. Visit us here for more details:
http://p.sf.net/sfu/dev2dev-palm
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

Gurudas Pai

author

2010-08-02 06:30 UTC #3 lore raw

Quoted 13 lines · Garrett Cooper

Quoted 12 lines · Garrett Cooper
Quoted 11 lines · Gurudas Pai
Hi There,
I am using LTP-20100630 , and while running POWER_MANAGEMENT test I get following errors,
/opt/ltp/testcases/bin/runpwtests.sh: line 201: get_sched_values:
command not found
Change log shows get_sched_values.c is removed.

Quoted 7 lines

Quoted 5 lines
Quoted 4 lines
92) Log Message:
1. Remove the .c files and all calls in runpwtests.sh because we can achieve the same thing through additional shell test logic.
2. Add the apicmds dependency.
File restored.
Except the file already existed... did you run make in the directory?

I ran make under ltp-full-20100630 directory, and not specifically under testcases/kernel/power_management.

Quoted 1 line

Quoted 1 line
File restored.

Where can i get this file ? I couldn't find it under
http://sourceforge.net/projects/ltp/files/

Thanks,
-Guru

------------------------------------------------------------------------------
The Palm PDK Hot Apps Program offers developers who use the Plug-In Development Kit to bring their C/C++ apps to Palm for a share of $1 Million in cash or HP Products. Visit us here for more details:
http://p.sf.net/sfu/dev2dev-palm
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

Garrett Cooper

2010-08-02 06:36 UTC #4 lore raw

Quoted 30 lines · Gurudas Pai

Quoted 18 lines · Garrett Cooper
Quoted 15 lines · Garrett Cooper
Quoted 12 lines · Gurudas Pai
Hi There,
I am using LTP-20100630 , and while running POWER_MANAGEMENT test I get following errors,
/opt/ltp/testcases/bin/runpwtests.sh: line 201: get_sched_values:
command not found
Change log shows get_sched_values.c is removed.
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
92) Log Message:
1. Remove the .c files and all calls in runpwtests.sh because we can achieve the same thing through additional shell test logic.
2. Add the apicmds dependency.
File restored.
Except the file already existed... did you run make in the directory?

Quoted 7 lines

I ran make under ltp-full-20100630 directory, and not specifically under testcases/kernel/power_management.
Quoted 1 line
Quoted 1 line
File restored.
Where can i get this file ? I couldn't find it under
http://sourceforge.net/projects/ltp/files

http://ltp.git.sourceforge.net/git/gitweb.cgi?p=ltp/ltp-dev.git;a=history;f=testcases/kernel/power_management/get_sched_values.c;h=830448bfa653e57ddead3837c7b1e7f139c273bd;hb=HEAD

------------------------------------------------------------------------------
The Palm PDK Hot Apps Program offers developers who use the Plug-In Development Kit to bring their C/C++ apps to Palm for a share of $1 Million in cash or HP Products. Visit us here for more details:
http://p.sf.net/sfu/dev2dev-palm
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

Gurudas Pai

author

2010-08-02 07:03 UTC #5 lore raw

Quoted 24 lines · Garrett Cooper

Quoted 23 lines · Gurudas Pai
Quoted 21 lines · Garrett Cooper
Quoted 11 lines · Garrett Cooper
Quoted 9 lines · Gurudas Pai
Hi There,
I am using LTP-20100630 , and while running POWER_MANAGEMENT test I get following errors,
/opt/ltp/testcases/bin/runpwtests.sh: line 201: get_sched_values:
command not found
Quoted 7 lines
Quoted 6 lines
Change log shows get_sched_values.c is removed.
92) Log Message:
1. Remove the .c files and all calls in runpwtests.sh because we can achieve the same thing through additional shell test logic.
2. Add the apicmds dependency.
File restored.
Except the file already existed... did you run make in the directory?

Quoted 8 lines

Quoted 6 lines
I ran make under ltp-full-20100630 directory, and not specifically under testcases/kernel/power_management.
Quoted 1 line
Quoted 1 line
File restored.
Where can i get this file ? I couldn't find it under
http://sourceforge.net/projects/ltp/files
http://ltp.git.sourceforge.net/git/gitweb.cgi?p=ltp/ltp-dev.git;a=history;f=testcases/kernel/power_management/get_sched_values.c;h=830448bfa653e57ddead3837c7b1e7f139c273bd;hb=HEAD

Thanks ! test passed now.

-Guru

------------------------------------------------------------------------------
The Palm PDK Hot Apps Program offers developers who use the Plug-In Development Kit to bring their C/C++ apps to Palm for a share of $1 Million in cash or HP Products. Visit us here for more details:
http://p.sf.net/sfu/dev2dev-palm
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list