S5P: mmc: use the standard debug macro
PATCH 1/1 S5P: mmc: use the standard debug macro
Use the standard debug macro instead of the costom macro
Signed-off-by Minkyu Kang <[email protected]>
Cc Wolfgang Denk <[email protected]>
--- drivers/mmc/s5p_mmc.c | 30 ++++++++++++------------------ 1 files changed, 12 insertions(+), 18 deletions(-)
drivers/mmc/s5p_mmc.c +12 -18
@@ -23,12 +23,6 @@#include <asm/io.h> #include <asm/arch/mmc.h> -#ifdef DEBUG_S5P_HSMMC -#define dbg(x...) printf(x) -#else -#define dbg(x...) do { } while (0) -#endif -/* support 4 mmc hosts */ struct mmc mmc_dev[4 ];struct mmc_host mmc_host[4 ];
@@ -47,7 +41,7 @@ static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data) {unsigned char ctrl; -dbg ("data->dest: %08x\n" , (u32 )data->dest); +debug ("data->dest: %08x\n" , (u32 )data->dest);writel ((u32 )data->dest, &host->reg->sysad);/* * DMASEL[4:3]
@@ -128,7 +122,7 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,if (data)mmc_prepare_data (host, data); -dbg ("cmd->arg: %08x\n" , cmd->cmdarg); +debug ("cmd->arg: %08x\n" , cmd->cmdarg);writel (cmd->cmdarg, &host->reg->argument);if (data)
@@ -165,7 +159,7 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,if (data) flags |= (1 <<5 ); -dbg ("cmd: %d\n" , cmd->cmdidx); +debug ("cmd: %d\n" , cmd->cmdidx);writew ((cmd->cmdidx <<8 ) | flags, &host->reg->cmdreg);
@@ -186,11 +180,11 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,if (mask & (1 <<16 )) {/* Timeout Error */ -dbg ("timeout: %08x cmd %d\n" , mask, cmd->cmdidx); +debug ("timeout: %08x cmd %d\n" , mask, cmd->cmdidx);return TIMEOUT ; }else if (mask & (1 <<15 )) {/* Error Interrupt */ -dbg ("error: %08x cmd %d\n" , mask, cmd->cmdidx); +debug ("error: %08x cmd %d\n" , mask, cmd->cmdidx);return -1 ; }
@@ -206,7 +200,7 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, cmd->response[i] |=readb (offset -1 ); } -dbg ("cmd->resp[%d]: %08x\n" , +debug ("cmd->resp[%d]: %08x\n" , i, cmd->response[i]); } }else if (cmd->resp_type &MMC_RSP_BUSY ) {
@@ -223,10 +217,10 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, } cmd->response[0 ] =readl (&host->reg->rspreg0); -dbg ("cmd->resp[0]: %08x\n" , cmd->response[0 ]); +debug ("cmd->resp[0]: %08x\n" , cmd->response[0 ]); }else { cmd->response[0 ] =readl (&host->reg->rspreg0); -dbg ("cmd->resp[0]: %08x\n" , cmd->response[0 ]); +debug ("cmd->resp[0]: %08x\n" , cmd->response[0 ]); } }
@@ -242,11 +236,11 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,return -1 ; }else if (mask & (1 <<3 )) {/* DMA Interrupt */ -dbg ("DMA end\n" ); +debug ("DMA end\n" );break ; }else if (mask & (1 <<1 )) {/* Transfer Complete */ -dbg ("r/w is done\n" ); +debug ("r/w is done\n" );break ; } }
@@ -288,7 +282,7 @@ static void mmc_change_clock(struct mmc_host *host, uint clock) div =2 ; else div =1 ; -dbg ("div: %d\n" , div); +debug ("div: %d\n" , div); div >>=1 ;/*
@@ -325,7 +319,7 @@ static void mmc_set_ios(struct mmc *mmc)unsigned char ctrl;unsigned long val; -dbg ("set_ios: bus_width: %x, clock: %d\n" , mmc->bus_width, mmc->clock); +debug ("bus_width: %x, clock: %d\n" , mmc->bus_width, mmc->clock);/* * SELCLKPADDS[17:16]
Signature · 1 line
1.7.0.4
PATCH 1/1 S5P: mmc: use the standard debug macro
Quoted 8 lines · Minkyu Kang
Use the standard debug macro instead of the costom macro
Signed-off-by Minkyu Kang <[email protected]>Cc Wolfgang Denk <[email protected]>---
?drivers/mmc/s5p_mmc.c | ? 30 ++++++++++++------------------ ?1 files changed, 12 insertions(+), 18 deletions(-)
applied to u-boot-samsung.
Minkyu Kang
Signature · 2 lines
from. prom. www.promsoft.net