enable T11 bit for mlx4 device
PATCH 6/10 enable T11 bit for mlx4 device
Enable T11 bit support on mlx4 device
Signed-off-by Oren Duer <oren-VPRAkNaXOzVS1MOuV/[email protected]>
Signed-off-by Vu Pham <[email protected]>
drivers/net/mlx4/fw.c | 13 +++++++++++++include/linux/mlx4/device.h | 5 ++++-
2 files changed, 17 insertions(+), 1 deletions(-)
Enable T11 bit in mlx4 device
Signed-off-by Oren Duer <oren-VPRAkNaXOzVS1MOuV/[email protected]>
Signed-off-by Vu Pham <[email protected]>
drivers/net/mlx4/fw.c | 13 +++++++++++++ include/linux/mlx4/device.h | 5 ++++- 2 files changed, 17 insertions(+), 1 deletions(-)
drivers/net/mlx4/fw.c +13 -0
@@ -51,6 +51,10 @@ static int enable_qos;module_param (enable_qos, bool,0444 );MODULE_PARM_DESC (enable_qos,"Enable Quality of Service support in the HCA (default: off)" ); +static int mlx4_pre_t11_mode =0 ; +module_param_named (enable_pre_t11_mode, mlx4_pre_t11_mode, int,0644 ); +MODULE_PARM_DESC (enable_pre_t11_mode,"For FCoXX, enable pre-t11 mode if non-zero (default: 0)" ); +#define MLX4_GET (dest, source, offset) \ do { \ void *__p = (char *) (source) + (offset); \
@@ -792,6 +796,8 @@ int mlx4_INIT_HCA(struct mlx4_dev *dev, struct mlx4_init_hca_param *param)MLX4_PUT (inbox, (u8) (PAGE_SHIFT -12 ),INIT_HCA_UAR_PAGE_SZ_OFFSET );MLX4_PUT (inbox, param->log_uar_sz,INIT_HCA_LOG_UAR_SZ_OFFSET ); +if (!mlx4_pre_t11_mode && dev->caps.flags & (u32 )MLX4_DEV_CAP_FLAG_FC_T11 ) + *(inbox +INIT_HCA_FLAGS_OFFSET /4 ) |=cpu_to_be32 (1 <<10 ); err =mlx4_cmd (dev, mailbox->dma,0 ,0 ,MLX4_CMD_INIT_HCA ,10000 );
@@ -890,3 +896,10 @@ int mlx4_NOP(struct mlx4_dev *dev)/* Input modifier of 0x1f means "finish as soon as possible." */ return mlx4_cmd (dev,0 ,0x1f ,0 ,MLX4_CMD_NOP ,100 ); } + +void mlx4_get_fc_t11_settings (struct mlx4_dev *dev,int *enable_pre_t11,int *t11_supported) +{ + *enable_pre_t11 = mlx4_pre_t11_mode; + *t11_supported = dev->caps.flags &MLX4_DEV_CAP_FLAG_FC_T11 ; +} +EXPORT_SYMBOL_GPL (mlx4_get_fc_t11_settings);
include/linux/mlx4/device.h +4 -1
@@ -67,7 +67,8 @@ enum {MLX4_DEV_CAP_FLAG_ATOMIC =1 <<18 ,MLX4_DEV_CAP_FLAG_RAW_MCAST =1 <<19 ,MLX4_DEV_CAP_FLAG_UD_AV_PORT =1 <<20 , -MLX4_DEV_CAP_FLAG_UD_MCAST =1 <<21 +MLX4_DEV_CAP_FLAG_UD_MCAST =1 <<21 , +MLX4_DEV_CAP_FLAG_FC_T11 =1 <<31 }; enum {
@@ -491,4 +492,6 @@ int mlx4_fmr_free_reserved(struct mlx4_dev *dev, struct mlx4_fmr *fmr);int mlx4_fmr_free (struct mlx4_dev *dev,struct mlx4_fmr *fmr);int mlx4_SYNC_TPT (struct mlx4_dev *dev); +void mlx4_get_fc_t11_settings (struct mlx4_dev *dev,int *enable_pre_t11,int *t11_supported); +#endif /* MLX4_DEVICE_H */
_______________________________________________
ewg mailing list [email protected]
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg