Skip to contentSkip to conversation

i2c: Enable NXP LPC support in Kconfig

PATCH New Kevin Wells 3 participants 3 messages Aug 5, 2010 – Aug 9, 2010 I2C subsystem host drivers

lore
Share & tools
lore

Kevin Wells

author
#0 lore raw

PATCH 1/1 i2c: Enable NXP LPC support in Kconfig

NXP LPC series processors use the IP3204 I2C block shared with the Philips PNX4008 processor.

Signed-off-by Kevin Wells <[email protected]>
---
 drivers/i2c/busses/Kconfig |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
drivers/i2c/busses/Kconfig +2 -2
index bceafbf..77eabae 100644
@@ -496,8 +496,8 @@ config I2C_PMCMSP
 	  will be called i2c-pmcmsp.
 
 config I2C_PNX
-	tristate "I2C bus support for Philips PNX targets"
-	depends on ARCH_PNX4008
+	tristate "I2C bus support for Philips PNX and NXP LPC targets"
+	depends on ARCH_PNX4008 || ARCH_LPC32XX
 	help
 	  This driver supports the Philips IP3204 I2C IP block master and/or
 	  slave controller
Signature · 1 line
1.7.1.1
#1 lore raw

PATCH 1/1 i2c: Enable NXP LPC support in Kconfig

Quoted 3 lines · Kevin Wells

NXP LPC series processors use the IP3204 I2C block shared with the Philips PNX4008 processor.

ok, applied.

#2 lore raw

PATCH 1/1 i2c: Enable NXP LPC support in Kconfig

In reply to Kevin Wells
Quoted 4 lines · Kevin Wells

NXP LPC series processors use the IP3204 I2C block shared with the Philips PNX4008 processor.

Signed-off-by Kevin Wells <[email protected]>

FWIW

Tested-by Wolfram Sang <[email protected]>
Signature · 9 lines
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100809/07d9db12/attachment.sig>