Skip to contentSkip to conversation

ARM: pxa168: add keypad support

PATCH RESEND Applied Mark F. Brown 3 participants 20 messages Sep 3, 2010 – Sep 5, 2010

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

v2 cover ARM: pxa168: add keypad support

Version 1
1) Make pxa27x_keypad.h accessible to mach-mmp
2) Add a wakeup handler for pxa27x_keypad interrupts
The wakeup callback fixes an issue on the pxa168 that prevents the keypad driver from being able to clear the keypad interrupt after reading KPC_PC
3) Add initial board level support

Version 2
1) Clean up for wakeup handler moved from pxa168-irq to pxa27x_keypad
2) Reduced the number of rows to 5 for Aspenite

Resend
1) System time was wrong when email was sent

Mark F. Brown (6):
ARM: pxa27x/pxa3xx: moved pxa27x_keypad.h to platform pxa directory
ARM: pxa168: added keypad support
ARM: pxa168: added wake clear register support for APMU
ARM: pxa27x_keypad: added wakeup event handler for keypad interrupts
ARM: pxa168: added keypad wake clear event support for platform
ARM: pxa168: aspenite: add board support for keypad

 arch/arm/mach-mmp/aspenite.c                       |   27 ++++++++++++++++++++
 arch/arm/mach-mmp/include/mach/mfp-pxa168.h        |    7 +++++
 arch/arm/mach-mmp/include/mach/pxa168.h            |   12 +++++++++
 arch/arm/mach-mmp/include/mach/regs-apmu.h         |   12 +++++++++
 arch/arm/mach-mmp/pxa168.c                         |   13 +++++++++
 arch/arm/mach-pxa/devices.c                        |    2 +-
 arch/arm/mach-pxa/em-x270.c                        |    2 +-
 arch/arm/mach-pxa/ezx.c                            |    2 +-
 arch/arm/mach-pxa/littleton.c                      |    2 +-
 arch/arm/mach-pxa/mainstone.c                      |    4 +-
 arch/arm/mach-pxa/mioa701.c                        |    2 +-
 arch/arm/mach-pxa/palmld.c                         |    2 +-
 arch/arm/mach-pxa/palmt5.c                         |    2 +-
 arch/arm/mach-pxa/palmtreo.c                       |    2 +-
 arch/arm/mach-pxa/palmtx.c                         |    2 +-
 arch/arm/mach-pxa/palmz72.c                        |    2 +-
 arch/arm/mach-pxa/tavorevb.c                       |    2 +-
 arch/arm/mach-pxa/z2.c                             |    2 +-
 arch/arm/mach-pxa/zylonite.c                       |    2 +-
 .../mach => plat-pxa/include/plat}/pxa27x_keypad.h |    1 +
 drivers/input/keyboard/Kconfig                     |    2 +-
 drivers/input/keyboard/pxa27x_keypad.c             |   12 ++++++++-
 22 files changed, 99 insertions(+), 17 deletions(-)
 rename arch/arm/{mach-pxa/include/mach => plat-pxa/include/plat}/pxa27x_keypad.h (97%)
#1 lore raw

PATCH RESEND v2 1/6 ARM: pxa27x/pxa3xx: moved pxa27x_keypad.h to platform pxa directory

mach-mmp utilizes pxa27x_keypad code so we need to move header to platform pxa directory.

---
 arch/arm/mach-pxa/devices.c                        |    2 +-
 arch/arm/mach-pxa/em-x270.c                        |    2 +-
 arch/arm/mach-pxa/ezx.c                            |    2 +-
 arch/arm/mach-pxa/littleton.c                      |    2 +-
 arch/arm/mach-pxa/mainstone.c                      |    4 ++--
 arch/arm/mach-pxa/mioa701.c                        |    2 +-
 arch/arm/mach-pxa/palmld.c                         |    2 +-
 arch/arm/mach-pxa/palmt5.c                         |    2 +-
 arch/arm/mach-pxa/palmtreo.c                       |    2 +-
 arch/arm/mach-pxa/palmtx.c                         |    2 +-
 arch/arm/mach-pxa/palmz72.c                        |    2 +-
 arch/arm/mach-pxa/tavorevb.c                       |    2 +-
 arch/arm/mach-pxa/z2.c                             |    2 +-
 arch/arm/mach-pxa/zylonite.c                       |    2 +-
 .../mach => plat-pxa/include/plat}/pxa27x_keypad.h |    0
 drivers/input/keyboard/pxa27x_keypad.c             |    2 +-
 16 files changed, 16 insertions(+), 16 deletions(-)
 rename arch/arm/{mach-pxa/include/mach => plat-pxa/include/plat}/pxa27x_keypad.h (100%)
arch/arm/mach-pxa/devices.c +1 -1
index a2fc859..08b4103 100644
@@ -11,7 +11,7 @@
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/camera.h>
 #include <mach/audio.h>
arch/arm/mach-pxa/em-x270.c +1 -1
index 0517c17..51286a7 100644
@@ -43,7 +43,7 @@
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
 #include <mach/mmc.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <plat/i2c.h>
 #include <mach/camera.h>
 #include <mach/pxa2xx_spi.h>
arch/arm/mach-pxa/ezx.c +1 -1
index 3fe61f4..f997e84 100644
@@ -32,7 +32,7 @@
 #include <mach/ohci.h>
 #include <plat/i2c.h>
 #include <mach/hardware.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/camera.h>
 
 #include "devices.h"
arch/arm/mach-pxa/littleton.c +1 -1
index 83f3236..eb58506 100644
@@ -43,7 +43,7 @@
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/littleton.h>
 #include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
arch/arm/mach-pxa/mainstone.c +2 -2
index c2a8717..126dca1 100644
@@ -41,7 +41,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa27x.h>
+#include <plat/pxa27x.h>
 #include <mach/gpio.h>
 #include <mach/mainstone.h>
 #include <mach/audio.h>
@@ -50,7 +50,7 @@
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 
 #include "generic.h"
 #include "devices.h"
arch/arm/mach-pxa/mioa701.c +1 -1
index dc66942..ffb3f5a 100644
@@ -45,7 +45,7 @@
 
 #include <mach/pxa27x.h>
 #include <mach/regs-rtc.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
arch/arm/mach-pxa/palmld.c +1 -1
index 91038ee..3ff0c4a 100644
@@ -39,7 +39,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/palmasoc.h>
 #include <mach/palm27x.h>
 
arch/arm/mach-pxa/palmt5.c +1 -1
index 1c28199..5b9f766 100644
@@ -39,7 +39,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
 #include <mach/palm27x.h>
arch/arm/mach-pxa/palmtreo.c +1 -1
index 52defd5..f685a60 100644
@@ -39,7 +39,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/ohci.h>
 #include <mach/pxa2xx-regs.h>
arch/arm/mach-pxa/palmtx.c +1 -1
index 144dc2b..89a3792 100644
@@ -43,7 +43,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
 #include <mach/palm27x.h>
arch/arm/mach-pxa/palmz72.c +1 -1
index 87e4b10..38f4425 100644
@@ -41,7 +41,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
 #include <mach/palm27x.h>
arch/arm/mach-pxa/tavorevb.c +1 -1
index f02dcb5..0f440c9 100644
@@ -25,7 +25,7 @@
 
 #include <mach/pxa930.h>
 #include <mach/pxafb.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 
 #include "devices.h"
 #include "generic.h"
arch/arm/mach-pxa/z2.c +1 -1
index f0d0228..8c44bc4 100644
@@ -37,7 +37,7 @@
 #include <mach/z2.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
 
 #include <plat/i2c.h>
arch/arm/mach-pxa/zylonite.c +1 -1
index 2edad61..69df3ed 100644
@@ -30,7 +30,7 @@
 #include <mach/zylonite.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <plat/pxa3xx_nand.h>
 
 #include "devices.h"
arch/arm/plat-pxa/include/plat/pxa27x_keypad.h renamed from arch/arm/mach-pxa/include/mach/pxa27x_keypad.h +0 -0
similarity index 100%
rename from arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
rename to arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
drivers/input/keyboard/pxa27x_keypad.c +1 -1
index 0e53b3b..0610d10 100644
@@ -32,7 +32,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 /*
  * Keypad Controller registers
  */
Signature · 1 line
1.7.0.4
Applied
#2 lore raw

Re: [PATCH v2 1/6 RESEND] ARM: pxa27x/pxa3xx: moved pxa27x_keypad.h to platform pxa directory

Quoted 4 lines · Mark F. Brown

mach-mmp utilizes pxa27x_keypad code so we need to move header to platform pxa directory.

Applied to 'devel'.

#3 lore raw

PATCH RESEND v2 1/6 ARM: pxa27x/pxa3xx: moved pxa27x_keypad.h to platform pxa directory

In reply to Mark F. Brown

mach-mmp utilizes pxa27x_keypad code so we need to move header to platform pxa directory.

---
 arch/arm/mach-pxa/devices.c                        |    2 +-
 arch/arm/mach-pxa/em-x270.c                        |    2 +-
 arch/arm/mach-pxa/ezx.c                            |    2 +-
 arch/arm/mach-pxa/littleton.c                      |    2 +-
 arch/arm/mach-pxa/mainstone.c                      |    4 ++--
 arch/arm/mach-pxa/mioa701.c                        |    2 +-
 arch/arm/mach-pxa/palmld.c                         |    2 +-
 arch/arm/mach-pxa/palmt5.c                         |    2 +-
 arch/arm/mach-pxa/palmtreo.c                       |    2 +-
 arch/arm/mach-pxa/palmtx.c                         |    2 +-
 arch/arm/mach-pxa/palmz72.c                        |    2 +-
 arch/arm/mach-pxa/tavorevb.c                       |    2 +-
 arch/arm/mach-pxa/z2.c                             |    2 +-
 arch/arm/mach-pxa/zylonite.c                       |    2 +-
 .../mach => plat-pxa/include/plat}/pxa27x_keypad.h |    0
 drivers/input/keyboard/pxa27x_keypad.c             |    2 +-
 16 files changed, 16 insertions(+), 16 deletions(-)
 rename arch/arm/{mach-pxa/include/mach => plat-pxa/include/plat}/pxa27x_keypad.h (100%)
arch/arm/mach-pxa/devices.c +1 -1
index a2fc859..08b4103 100644
@@ -11,7 +11,7 @@
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/camera.h>
 #include <mach/audio.h>
arch/arm/mach-pxa/em-x270.c +1 -1
index 0517c17..51286a7 100644
@@ -43,7 +43,7 @@
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
 #include <mach/mmc.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <plat/i2c.h>
 #include <mach/camera.h>
 #include <mach/pxa2xx_spi.h>
arch/arm/mach-pxa/ezx.c +1 -1
index 3fe61f4..f997e84 100644
@@ -32,7 +32,7 @@
 #include <mach/ohci.h>
 #include <plat/i2c.h>
 #include <mach/hardware.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/camera.h>
 
 #include "devices.h"
arch/arm/mach-pxa/littleton.c +1 -1
index 83f3236..eb58506 100644
@@ -43,7 +43,7 @@
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/littleton.h>
 #include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
arch/arm/mach-pxa/mainstone.c +2 -2
index c2a8717..126dca1 100644
@@ -41,7 +41,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa27x.h>
+#include <plat/pxa27x.h>
 #include <mach/gpio.h>
 #include <mach/mainstone.h>
 #include <mach/audio.h>
@@ -50,7 +50,7 @@
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 
 #include "generic.h"
 #include "devices.h"
arch/arm/mach-pxa/mioa701.c +1 -1
index dc66942..ffb3f5a 100644
@@ -45,7 +45,7 @@
 
 #include <mach/pxa27x.h>
 #include <mach/regs-rtc.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
arch/arm/mach-pxa/palmld.c +1 -1
index 91038ee..3ff0c4a 100644
@@ -39,7 +39,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/palmasoc.h>
 #include <mach/palm27x.h>
 
arch/arm/mach-pxa/palmt5.c +1 -1
index 1c28199..5b9f766 100644
@@ -39,7 +39,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
 #include <mach/palm27x.h>
arch/arm/mach-pxa/palmtreo.c +1 -1
index 52defd5..f685a60 100644
@@ -39,7 +39,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/ohci.h>
 #include <mach/pxa2xx-regs.h>
arch/arm/mach-pxa/palmtx.c +1 -1
index 144dc2b..89a3792 100644
@@ -43,7 +43,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
 #include <mach/palm27x.h>
arch/arm/mach-pxa/palmz72.c +1 -1
index 87e4b10..38f4425 100644
@@ -41,7 +41,7 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
 #include <mach/palm27x.h>
arch/arm/mach-pxa/tavorevb.c +1 -1
index f02dcb5..0f440c9 100644
@@ -25,7 +25,7 @@
 
 #include <mach/pxa930.h>
 #include <mach/pxafb.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 
 #include "devices.h"
 #include "generic.h"
arch/arm/mach-pxa/z2.c +1 -1
index f0d0228..8c44bc4 100644
@@ -37,7 +37,7 @@
 #include <mach/z2.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
 
 #include <plat/i2c.h>
arch/arm/mach-pxa/zylonite.c +1 -1
index 2edad61..69df3ed 100644
@@ -30,7 +30,7 @@
 #include <mach/zylonite.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <plat/pxa3xx_nand.h>
 
 #include "devices.h"
arch/arm/plat-pxa/include/plat/pxa27x_keypad.h renamed from arch/arm/mach-pxa/include/mach/pxa27x_keypad.h +0 -0
similarity index 100%
rename from arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
rename to arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
drivers/input/keyboard/pxa27x_keypad.c +1 -1
index 0e53b3b..0610d10 100644
@@ -32,7 +32,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 /*
  * Keypad Controller registers
  */
Signature · 1 line
1.7.0.4
#4 lore raw

PATCH RESEND v2 2/6 ARM: pxa168: added keypad support

In reply to Mark F. Brown
---
 arch/arm/mach-mmp/include/mach/mfp-pxa168.h |    7 +++++++
 arch/arm/mach-mmp/include/mach/pxa168.h     |    7 +++++++
 arch/arm/mach-mmp/pxa168.c                  |    3 +++
 drivers/input/keyboard/Kconfig              |    2 +-
 4 files changed, 18 insertions(+), 1 deletions(-)
arch/arm/mach-mmp/include/mach/mfp-pxa168.h +7 -0
index ded43c4..4621067 100644
@@ -289,4 +289,11 @@
 #define GPIO86_PWM1_OUT		MFP_CFG(GPIO86, AF2)
 #define GPIO86_PWM2_OUT		MFP_CFG(GPIO86, AF3)
 
+/* Keypad */
+#define GPIO109_KP_MKIN1        MFP_CFG(GPIO109, AF7)
+#define GPIO110_KP_MKIN0        MFP_CFG(GPIO110, AF7)
+#define GPIO111_KP_MKOUT7       MFP_CFG(GPIO111, AF7)
+#define GPIO112_KP_MKOUT6       MFP_CFG(GPIO112, AF7)
+#define GPIO121_KP_MKIN4        MFP_CFG(GPIO121, AF7)
+
 #endif /* __ASM_MACH_MFP_PXA168_H */
arch/arm/mach-mmp/include/mach/pxa168.h +7 -0
index 220738f..f34e663 100644
@@ -11,6 +11,7 @@ extern void __init pxa168_init_irq(void);
 #include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 #include <video/pxa168fb.h>
+#include <plat/pxa27x_keypad.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
@@ -27,6 +28,7 @@ extern struct pxa_device_desc pxa168_device_ssp4;
 extern struct pxa_device_desc pxa168_device_ssp5;
 extern struct pxa_device_desc pxa168_device_nand;
 extern struct pxa_device_desc pxa168_device_fb;
+extern struct pxa_device_desc pxa168_device_keypad;
 
 static inline int pxa168_add_uart(int id)
 {
@@ -105,4 +107,9 @@ static inline int pxa168_add_fb(struct pxa168fb_mach_info *mi)
 	return pxa_register_device(&pxa168_device_fb, mi, sizeof(*mi));
 }
 
+static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data)
+{
+	return pxa_register_device(&pxa168_device_keypad, data, sizeof(*data));
+}
+
 #endif /* __ASM_MACH_PXA168_H */
arch/arm/mach-mmp/pxa168.c +3 -0
index eaebf66..2fa16fb 100644
@@ -77,6 +77,7 @@ static APBC_CLK(ssp2, PXA168_SSP2, 4, 0);
 static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
 static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
 static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
+static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
 
 static APMU_CLK(nand, NAND, 0x01db, 208000000);
 static APMU_CLK(lcd, LCD, 0x7f, 312000000);
@@ -98,6 +99,7 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 	INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
+	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
 };
 
 static int __init pxa168_init(void)
@@ -150,3 +152,4 @@ PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57);
 PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
 PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
 PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
+PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
drivers/input/keyboard/Kconfig +1 -1
index 9cc488d..aa037fe 100644
@@ -338,7 +338,7 @@ config KEYBOARD_OPENCORES
 
 config KEYBOARD_PXA27x
 	tristate "PXA27x/PXA3xx keypad support"
-	depends on PXA27x || PXA3xx
+	depends on PXA27x || PXA3xx || ARCH_MMP
 	help
 	  Enable support for PXA27x/PXA3xx keypad controller.
 
Signature · 1 line
1.7.0.4
#6 lore raw

PATCH RESEND v2 2/6 ARM: pxa168: added keypad support

In reply to Mark F. Brown
---
 arch/arm/mach-mmp/include/mach/mfp-pxa168.h |    7 +++++++
 arch/arm/mach-mmp/include/mach/pxa168.h     |    7 +++++++
 arch/arm/mach-mmp/pxa168.c                  |    3 +++
 drivers/input/keyboard/Kconfig              |    2 +-
 4 files changed, 18 insertions(+), 1 deletions(-)
arch/arm/mach-mmp/include/mach/mfp-pxa168.h +7 -0
index ded43c4..4621067 100644
@@ -289,4 +289,11 @@
 #define GPIO86_PWM1_OUT		MFP_CFG(GPIO86, AF2)
 #define GPIO86_PWM2_OUT		MFP_CFG(GPIO86, AF3)
 
+/* Keypad */
+#define GPIO109_KP_MKIN1        MFP_CFG(GPIO109, AF7)
+#define GPIO110_KP_MKIN0        MFP_CFG(GPIO110, AF7)
+#define GPIO111_KP_MKOUT7       MFP_CFG(GPIO111, AF7)
+#define GPIO112_KP_MKOUT6       MFP_CFG(GPIO112, AF7)
+#define GPIO121_KP_MKIN4        MFP_CFG(GPIO121, AF7)
+
 #endif /* __ASM_MACH_MFP_PXA168_H */
arch/arm/mach-mmp/include/mach/pxa168.h +7 -0
index 220738f..f34e663 100644
@@ -11,6 +11,7 @@ extern void __init pxa168_init_irq(void);
 #include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 #include <video/pxa168fb.h>
+#include <plat/pxa27x_keypad.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
@@ -27,6 +28,7 @@ extern struct pxa_device_desc pxa168_device_ssp4;
 extern struct pxa_device_desc pxa168_device_ssp5;
 extern struct pxa_device_desc pxa168_device_nand;
 extern struct pxa_device_desc pxa168_device_fb;
+extern struct pxa_device_desc pxa168_device_keypad;
 
 static inline int pxa168_add_uart(int id)
 {
@@ -105,4 +107,9 @@ static inline int pxa168_add_fb(struct pxa168fb_mach_info *mi)
 	return pxa_register_device(&pxa168_device_fb, mi, sizeof(*mi));
 }
 
+static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data)
+{
+	return pxa_register_device(&pxa168_device_keypad, data, sizeof(*data));
+}
+
 #endif /* __ASM_MACH_PXA168_H */
arch/arm/mach-mmp/pxa168.c +3 -0
index eaebf66..2fa16fb 100644
@@ -77,6 +77,7 @@ static APBC_CLK(ssp2, PXA168_SSP2, 4, 0);
 static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
 static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
 static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
+static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
 
 static APMU_CLK(nand, NAND, 0x01db, 208000000);
 static APMU_CLK(lcd, LCD, 0x7f, 312000000);
@@ -98,6 +99,7 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 	INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
+	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
 };
 
 static int __init pxa168_init(void)
@@ -150,3 +152,4 @@ PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57);
 PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
 PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
 PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
+PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
drivers/input/keyboard/Kconfig +1 -1
index 9cc488d..aa037fe 100644
@@ -338,7 +338,7 @@ config KEYBOARD_OPENCORES
 
 config KEYBOARD_PXA27x
 	tristate "PXA27x/PXA3xx keypad support"
-	depends on PXA27x || PXA3xx
+	depends on PXA27x || PXA3xx || ARCH_MMP
 	help
 	  Enable support for PXA27x/PXA3xx keypad controller.
 
Signature · 1 line
1.7.0.4
#7 lore raw

PATCH RESEND v2 3/6 ARM: pxa168: added wake clear register support for APMU

In reply to Mark F. Brown
---
 arch/arm/mach-mmp/include/mach/regs-apmu.h |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)
arch/arm/mach-mmp/include/mach/regs-apmu.h +12 -0
index 9190305..ac47023 100644
@@ -33,4 +33,16 @@
 #define APMU_FNRST_DIS	(1 << 1)
 #define APMU_AXIRST_DIS	(1 << 0)
 
+/* Wake Clear Register */
+#define APMU_WAKE_CLR	APMU_REG(0x07c)
+
+#define APMU_PXA168_KP_WAKE_CLR		(1 << 7)
+#define APMU_PXA168_CFI_WAKE_CLR	(1 << 6)
+#define APMU_PXA168_XD_WAKE_CLR		(1 << 5)
+#define APMU_PXA168_MSP_WAKE_CLR	(1 << 4)
+#define APMU_PXA168_SD4_WAKE_CLR	(1 << 3)
+#define APMU_PXA168_SD3_WAKE_CLR	(1 << 2)
+#define APMU_PXA168_SD2_WAKE_CLR	(1 << 1)
+#define APMU_PXA168_SD1_WAKE_CLR	(1 << 0)
+
 #endif /* __ASM_MACH_REGS_APMU_H */
Signature · 1 line
1.7.0.4
#9 lore raw

PATCH RESEND v2 3/6 ARM: pxa168: added wake clear register support for APMU

In reply to Mark F. Brown
---
 arch/arm/mach-mmp/include/mach/regs-apmu.h |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)
arch/arm/mach-mmp/include/mach/regs-apmu.h +12 -0
index 9190305..ac47023 100644
@@ -33,4 +33,16 @@
 #define APMU_FNRST_DIS	(1 << 1)
 #define APMU_AXIRST_DIS	(1 << 0)
 
+/* Wake Clear Register */
+#define APMU_WAKE_CLR	APMU_REG(0x07c)
+
+#define APMU_PXA168_KP_WAKE_CLR		(1 << 7)
+#define APMU_PXA168_CFI_WAKE_CLR	(1 << 6)
+#define APMU_PXA168_XD_WAKE_CLR		(1 << 5)
+#define APMU_PXA168_MSP_WAKE_CLR	(1 << 4)
+#define APMU_PXA168_SD4_WAKE_CLR	(1 << 3)
+#define APMU_PXA168_SD3_WAKE_CLR	(1 << 2)
+#define APMU_PXA168_SD2_WAKE_CLR	(1 << 1)
+#define APMU_PXA168_SD1_WAKE_CLR	(1 << 0)
+
 #endif /* __ASM_MACH_REGS_APMU_H */
Signature · 1 line
1.7.0.4
#10 lore raw

PATCH RESEND v2 4/6 ARM: pxa27x_keypad: added wakeup event handler for keypad interrupts

In reply to Mark F. Brown

mach-mmp needs to clear wake event in order to clear the keypad interrupt

---
 arch/arm/plat-pxa/include/plat/pxa27x_keypad.h |    1 +
 drivers/input/keyboard/pxa27x_keypad.c         |   10 ++++++++++
 2 files changed, 11 insertions(+), 0 deletions(-)
arch/arm/plat-pxa/include/plat/pxa27x_keypad.h +1 -0
index 7b4eadc..73dacda 100644
@@ -52,6 +52,7 @@ struct pxa27x_keypad_platform_data {
 
 	/* key debounce interval */
 	unsigned int	debounce_interval;
+	void		(*clear_wakeup_event)(void);
 };
 
 extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
drivers/input/keyboard/pxa27x_keypad.c +10 -0
index 0610d10..b36d2be 100644
@@ -330,11 +330,21 @@ static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad)
 	keypad->direct_key_state = new_state;
 }
 
+static void clear_wakeup_event(struct pxa27x_keypad *keypad)
+{
+	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+
+	if (pdata->clear_wakeup_event)
+		(pdata->clear_wakeup_event)();
+}
+
 static irqreturn_t pxa27x_keypad_irq_handler(int irq, void *dev_id)
 {
 	struct pxa27x_keypad *keypad = dev_id;
 	unsigned long kpc = keypad_readl(KPC);
 
+	clear_wakeup_event(keypad);
+
 	if (kpc & KPC_DI)
 		pxa27x_keypad_scan_direct(keypad);
 
Signature · 1 line
1.7.0.4
Applied
#11 lore raw

Re: [PATCH v2 4/6 RESEND] ARM: pxa27x_keypad: added wakeup event handler for keypad interrupts

Quoted 3 lines · Mark F. Brown

mach-mmp needs to clear wake event in order to clear the keypad interrupt

Applied.

#12 lore raw

Re: [PATCH v2 4/6 RESEND] ARM: pxa27x_keypad: added wakeup event handler for keypad interrupts

In reply to Mark F. Brown
Quoted 13 lines · Mark F. Brown

mach-mmp needs to clear wake event in order to clear the keypad interrupt

---
 arch/arm/plat-pxa/include/plat/pxa27x_keypad.h |    1 +
 drivers/input/keyboard/pxa27x_keypad.c         |   10 ++++++++++
 2 files changed, 11 insertions(+), 0 deletions(-)
arch/arm/plat-pxa/include/plat/pxa27x_keypad.h +0 -0
index 7b4eadc..73dacda 100644

arch/arm/plat-pxa/include/plat/pxa27x_keypad.h struct pxa27x_keypad_platform_data { · line 55

Quoted 4 lines
arch/arm/plat-pxa/include/plat/pxa27x_keypad.h +1 -0
@@ -52,6 +52,7 @@ struct pxa27x_keypad_platform_data {
 
 	/* key debounce interval */
 	unsigned int	debounce_interval;
+	void		(*clear_wakeup_event)(void);

I understand, this is a bit late... but still I want to ask a question:
As I understand, the clear_wakeup_event() function is called in interrupt context, wouldn't it be wiser to add a comment on this, so platform (current/future) code will be aware and will make no heavy stuff in it (accidentally).

Quoted 29 lines
arch/arm/plat-pxa/include/plat/pxa27x_keypad.h +0 -0
 };
 
 extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
drivers/input/keyboard/pxa27x_keypad.c +10 -0
index 0610d10..b36d2be 100644
@@ -330,11 +330,21 @@ static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad)
 	keypad->direct_key_state = new_state;
 }
 
+static void clear_wakeup_event(struct pxa27x_keypad *keypad)
+{
+	struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+
+	if (pdata->clear_wakeup_event)
+		(pdata->clear_wakeup_event)();
+}
+
 static irqreturn_t pxa27x_keypad_irq_handler(int irq, void *dev_id)
 {
 	struct pxa27x_keypad *keypad = dev_id;
 	unsigned long kpc = keypad_readl(KPC);
 
+	clear_wakeup_event(keypad);
+
 	if (kpc & KPC_DI)
 		pxa27x_keypad_scan_direct(keypad);
 
Signature · 2 lines
Regards,
Igor.
#13 lore raw

Re: [PATCH v2 4/6 RESEND] ARM: pxa27x_keypad: added wakeup event handler for keypad interrupts

Quoted 15 lines · Igor Grinberg
Quoted 14 lines · Mark F. Brown

mach-mmp needs to clear wake event in order to clear the keypad interrupt

---
?arch/arm/plat-pxa/include/plat/pxa27x_keypad.h | ? ?1 + ?drivers/input/keyboard/pxa27x_keypad.c ? ? ? ? | ? 10 ++++++++++ ?2 files changed, 11 insertions(+), 0 deletions(-)

arch/arm/plat-pxa/include/plat/pxa27x_keypad.h +0 -0
index 7b4eadc..73dacda 100644
@@ -52,6 +52,7 @@ struct pxa27x_keypad_platform_data {
 
Quoted 9 lines
Quoted 3 lines

? ? ? /* key debounce interval */
? ? ? unsigned int ? ?debounce_interval;
+ ? ? void ? ? ? ? ? ?(*clear_wakeup_event)(void);

I understand, this is a bit late... but still I want to ask a question:
As I understand, the clear_wakeup_event() function is called in interrupt context, wouldn't it be wiser to add a comment on this, so platform (current/future) code will be aware and will make no heavy stuff in it (accidentally).

A comment will be good to have indeed, not just explaining the context this function will be running, but also a bit about why this is introduced.

Mark,

If you come up with an updated patch, I'll help rebase my tree.

Quoted 35 lines
Quoted 19 lines

?};

?extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);

drivers/input/keyboard/pxa27x_keypad.c +8 -0
index 0610d10..b36d2be 100644
@@ -330,11 +330,21 @@ static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad)
 ? ? ? keypad->direct_key_state = new_state;
 ?}
 
+static void clear_wakeup_event(struct pxa27x_keypad *keypad)
+{
+ ? ? struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+
+ ? ? if (pdata->clear_wakeup_event)
+ ? ? ? ? ? ? (pdata->clear_wakeup_event)();
+}
+

drivers/input/keyboard/pxa27x_keypad.c static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad) · line 350

Quoted 10 lines
drivers/input/keyboard/pxa27x_keypad.c +2 -0
 ?static irqreturn_t pxa27x_keypad_irq_handler(int irq, void *dev_id)
 ?{
 ? ? ? struct pxa27x_keypad *keypad = dev_id;
 ? ? ? unsigned long kpc = keypad_readl(KPC);
 
+ ? ? clear_wakeup_event(keypad);
+
 ? ? ? if (kpc & KPC_DI)
 ? ? ? ? ? ? ? pxa27x_keypad_scan_direct(keypad);
 

--
Regards,
Igor.

#14 lore raw

Re: [PATCH v2 4/6 RESEND] ARM: pxa27x_keypad: added wakeup event handler for keypad interrupts

Quoted 26 lines · Eric Miao
Quoted 15 lines · Igor Grinberg
Quoted 14 lines · Mark F. Brown

mach-mmp needs to clear wake event in order to clear the keypad interrupt

---
?arch/arm/plat-pxa/include/plat/pxa27x_keypad.h | ? ?1 + ?drivers/input/keyboard/pxa27x_keypad.c ? ? ? ? | ? 10 ++++++++++ ?2 files changed, 11 insertions(+), 0 deletions(-)

arch/arm/plat-pxa/include/plat/pxa27x_keypad.h +0 -0
index 7b4eadc..73dacda 100644
@@ -52,6 +52,7 @@ struct pxa27x_keypad_platform_data {
 
Quoted 9 lines
Quoted 3 lines

? ? ? /* key debounce interval */
? ? ? unsigned int ? ?debounce_interval;
+ ? ? void ? ? ? ? ? ?(*clear_wakeup_event)(void);

I understand, this is a bit late... but still I want to ask a question:
As I understand, the clear_wakeup_event() function is called in interrupt context, wouldn't it be wiser to add a comment on this, so platform (current/future) code will be aware and will make no heavy stuff in it (accidentally).

Quoted 43 lines

A comment will be good to have indeed, not just explaining the context this function will be running, but also a bit about why this is introduced.

Mark,

If you come up with an updated patch, I'll help rebase my tree.

Quoted 35 lines
Quoted 19 lines

?};

?extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);

drivers/input/keyboard/pxa27x_keypad.c +8 -0
index 0610d10..b36d2be 100644
@@ -330,11 +330,21 @@ static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad)
 ? ? ? keypad->direct_key_state = new_state;
 ?}
 
+static void clear_wakeup_event(struct pxa27x_keypad *keypad)
+{
+ ? ? struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+
+ ? ? if (pdata->clear_wakeup_event)
+ ? ? ? ? ? ? (pdata->clear_wakeup_event)();
+}
+

drivers/input/keyboard/pxa27x_keypad.c static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad) · line 350

Quoted 10 lines
drivers/input/keyboard/pxa27x_keypad.c +2 -0
 ?static irqreturn_t pxa27x_keypad_irq_handler(int irq, void *dev_id)
 ?{
 ? ? ? struct pxa27x_keypad *keypad = dev_id;
 ? ? ? unsigned long kpc = keypad_readl(KPC);
 
+ ? ? clear_wakeup_event(keypad);
+
 ? ? ? if (kpc & KPC_DI)
 ? ? ? ? ? ? ? pxa27x_keypad_scan_direct(keypad);
 

--
Regards,
Igor.

Ok will do!

-- Mark

#15 lore raw

PATCH RESEND v2 5/6 ARM: pxa168: added keypad wake clear event support for platform

In reply to Mark F. Brown
---
 arch/arm/mach-mmp/include/mach/pxa168.h |    5 +++++
 arch/arm/mach-mmp/pxa168.c              |   10 ++++++++++
 2 files changed, 15 insertions(+), 0 deletions(-)
arch/arm/mach-mmp/include/mach/pxa168.h +5 -0
index f34e663..1801e42 100644
@@ -5,6 +5,7 @@ struct sys_timer;
 
 extern struct sys_timer pxa168_timer;
 extern void __init pxa168_init_irq(void);
+extern void pxa168_clear_keypad_wakeup(void);
 
 #include <linux/i2c.h>
 #include <mach/devices.h>
@@ -12,6 +13,7 @@ extern void __init pxa168_init_irq(void);
 #include <plat/pxa3xx_nand.h>
 #include <video/pxa168fb.h>
 #include <plat/pxa27x_keypad.h>
+#include <mach/cputype.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
@@ -109,6 +111,9 @@ static inline int pxa168_add_fb(struct pxa168fb_mach_info *mi)
 
 static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data)
 {
+	if (cpu_is_pxa168())
+		data->clear_wakeup_event = pxa168_clear_keypad_wakeup;
+
 	return pxa_register_device(&pxa168_device_keypad, data, sizeof(*data));
 }
 
arch/arm/mach-mmp/pxa168.c +10 -0
index 2fa16fb..72b4e76 100644
@@ -136,6 +136,16 @@ struct sys_timer pxa168_timer = {
 	.init	= pxa168_timer_init,
 };
 
+void pxa168_clear_keypad_wakeup(void)
+{
+	uint32_t val;
+	uint32_t mask = APMU_PXA168_KP_WAKE_CLR;
+
+	/* wake event clear is needed in order to clear keypad interrupt */
+	val = __raw_readl(APMU_WAKE_CLR);
+	__raw_writel(val |  mask, APMU_WAKE_CLR);
+}
+
 /* on-chip devices */
 PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
 PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
Signature · 1 line
1.7.0.4
#17 lore raw

PATCH RESEND v2 5/6 ARM: pxa168: added keypad wake clear event support for platform

In reply to Mark F. Brown
---
 arch/arm/mach-mmp/include/mach/pxa168.h |    5 +++++
 arch/arm/mach-mmp/pxa168.c              |   10 ++++++++++
 2 files changed, 15 insertions(+), 0 deletions(-)
arch/arm/mach-mmp/include/mach/pxa168.h +5 -0
index f34e663..1801e42 100644
@@ -5,6 +5,7 @@ struct sys_timer;
 
 extern struct sys_timer pxa168_timer;
 extern void __init pxa168_init_irq(void);
+extern void pxa168_clear_keypad_wakeup(void);
 
 #include <linux/i2c.h>
 #include <mach/devices.h>
@@ -12,6 +13,7 @@ extern void __init pxa168_init_irq(void);
 #include <plat/pxa3xx_nand.h>
 #include <video/pxa168fb.h>
 #include <plat/pxa27x_keypad.h>
+#include <mach/cputype.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
@@ -109,6 +111,9 @@ static inline int pxa168_add_fb(struct pxa168fb_mach_info *mi)
 
 static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data)
 {
+	if (cpu_is_pxa168())
+		data->clear_wakeup_event = pxa168_clear_keypad_wakeup;
+
 	return pxa_register_device(&pxa168_device_keypad, data, sizeof(*data));
 }
 
arch/arm/mach-mmp/pxa168.c +10 -0
index 2fa16fb..72b4e76 100644
@@ -136,6 +136,16 @@ struct sys_timer pxa168_timer = {
 	.init	= pxa168_timer_init,
 };
 
+void pxa168_clear_keypad_wakeup(void)
+{
+	uint32_t val;
+	uint32_t mask = APMU_PXA168_KP_WAKE_CLR;
+
+	/* wake event clear is needed in order to clear keypad interrupt */
+	val = __raw_readl(APMU_WAKE_CLR);
+	__raw_writel(val |  mask, APMU_WAKE_CLR);
+}
+
 /* on-chip devices */
 PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
 PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
Signature · 1 line
1.7.0.4
#18 lore raw

PATCH RESEND v2 6/6 ARM: pxa168: aspenite: add board support for keypad

In reply to Mark F. Brown
---
 arch/arm/mach-mmp/aspenite.c |   27 +++++++++++++++++++++++++++
 1 files changed, 27 insertions(+), 0 deletions(-)
arch/arm/mach-mmp/aspenite.c +27 -0
index 9e1bd6b..f04bae6 100644
@@ -24,6 +24,8 @@
 #include <mach/pxa168.h>
 #include <mach/gpio.h>
 #include <video/pxa168fb.h>
+#include <linux/input.h>
+#include <plat/pxa27x_keypad.h>
 
 #include "common.h"
 
@@ -97,6 +99,13 @@ static unsigned long common_pin_config[] __initdata = {
 	GPIO81_LCD_DD21,
 	GPIO82_LCD_DD22,
 	GPIO83_LCD_DD23,
+
+	/* Keypad */
+	GPIO109_KP_MKIN1,
+	GPIO110_KP_MKIN0,
+	GPIO111_KP_MKOUT7,
+	GPIO112_KP_MKOUT6,
+	GPIO121_KP_MKIN4,
 };
 
 static struct smc91x_platdata smc91x_info = {
@@ -193,6 +202,23 @@ struct pxa168fb_mach_info aspenite_lcd_info = {
 	.invert_pixclock	= 0,
 };
 
+static unsigned int aspenite_matrix_key_map[] = {
+	KEY(0, 6, KEY_UP),	/* SW 4 */
+	KEY(0, 7, KEY_DOWN),	/* SW 5 */
+	KEY(1, 6, KEY_LEFT),	/* SW 6 */
+	KEY(1, 7, KEY_RIGHT),	/* SW 7 */
+	KEY(4, 6, KEY_ENTER),	/* SW 8 */
+	KEY(4, 7, KEY_ESC),	/* SW 9 */
+};
+
+static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
+	.matrix_key_rows	= 5,
+	.matrix_key_cols	= 8,
+	.matrix_key_map		= aspenite_matrix_key_map,
+	.matrix_key_map_size	= ARRAY_SIZE(aspenite_matrix_key_map),
+	.debounce_interval	= 30,
+};
+
 static void __init common_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(common_pin_config));
@@ -203,6 +229,7 @@ static void __init common_init(void)
 	pxa168_add_ssp(1);
 	pxa168_add_nand(&aspenite_nand_info);
 	pxa168_add_fb(&aspenite_lcd_info);
+	pxa168_add_keypad(&aspenite_keypad_info);
 
 	/* off-chip devices */
 	platform_device_register(&smc91x_device);
Signature · 1 line
1.7.0.4