Topcliff: Update PCH_I2C driver to 2.6.35
PATCH 1/1 Topcliff: Update PCH_I2C driver to 2.6.35
Hi Alan and Wolfram Sang
We have updated for your indications.
Please confirm below.
Thanks, Ohtake (OKISemi)
---
I2C driver of Topcliff PCH
Topcliff PCH is the platform controller hub that is going to be used in Intel's upcoming general embedded platform. All IO peripherals in Topcliff PCH are actually devices sitting on AMBA bus. Topcliff PCH has I2C I/F. Using this I/F, it is able to access system devices connected to I2C.
Signed-off-by Masayuki Ohtake <[email protected]>
Reviewed-by Linus Walleij <[email protected]>
Signed-off-by Masayuki Ohtake <[email protected]>
--- drivers/i2c/busses/Kconfig | 8 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-pch.c | 929 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 938 insertions(+), 0 deletions(-) create mode 100644 drivers/i2c/busses/i2c-pch.c
drivers/i2c/busses/Kconfig +8 -0
@@ -613,6 +613,14 @@ config I2C_XILINX This driver can also be built as a module. If so, the module will be called xilinx_i2c. +config PCH_I2C + tristate "PCH I2C of Intel Topcliff" + depends on PCI + help + This driver is for PCH(Platform controller Hub) I2C of Topcliff which + is an IOH(Input/Output Hub) for x86 embedded processor. + This driver can access PCH I2C bus device. + comment "External I2C/SMBus adapter drivers" config I2C_PARPORT
drivers/i2c/busses/Makefile +1 -0
@@ -59,6 +59,7 @@ obj-$(CONFIG_I2C_STU300) += i2c-stu300.o obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o +obj-$(CONFIG_PCH_I2C) += i2c-pch.o # External I2C/SMBus adapter drivers obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
drivers/i2c/busses/i2c-pch.c new file +929 -0
929 lines not on this page · raw message
Signature · 1 line
1.6.0.6