Skip to contentSkip to conversation

force_igmp_version ignored when a IGMPv3 query received (+patch)

PATCH Bob Arendt 1 participant 1 message Sep 9, 2010

lore
Share & tools
lore

Bob Arendt

author
#0 lore raw

After all these years, it turns out that the
/proc/sys/net/ipv4/conf/*/force_igmp_version
parameter isn't fully implemented.

When set to a value of 2, the kernel should only perform multicast IGMPv2 operations (IETF rfc2236). An host-initiated Join message will be sent as a IGMPv2 Join message. But if a IGMPv3 query message is received, the host responds with a IGMPv3 join in response. Per rfc3376 and rfc2236, a IGMPv2 host should treat a IGMPv3 query as a IGMPv2 query and respond with an IGMPv2 message.

This is an issue when a IGMPv3 capable switch is the querier and will only issue IGMPv3 queries (which double as IGMPv2 querys) and there's an intermediate switch that is only IGMPv2 capable. The intermediate switch processes the initial v2 Join, but fails to recognize the IGMPv3 Join responses to the Query, resulting in a dropped connection when the intermediate v2-only switch times it out.

The issue is in this section of code (in net/ipv4/igmp.c), which is called when an IGMP query is received:

826 static void igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb,
827 int len)
828 {

829         struct igmphdr          *ih = igmp_hdr(skb);
830         struct igmpv3_query *ih3 = igmpv3_query_hdr(skb);
831         struct ip_mc_list       *im;
832         __be32                  group = ih->group;
833         int                     max_delay;
834         int                     mark = 0;

835
836
837 if (len == 8) {
838 if (ih->code == 0) {
839 /* Alas, old v1 router presents here. */
840
841 max_delay = IGMP_Query_Response_Interval;
842 in_dev->mr_v1_seen = jiffies +
843 IGMP_V1_Router_Present_Timeout;
844 group = 0;
845 } else {

846                         /* v2 router present */
847                         max_delay = ih->code*(HZ/IGMP_TIMER_SCALE);
848                         in_dev->mr_v2_seen = jiffies +
849                                 IGMP_V2_Router_Present_Timeout;
850                 }
851                 /* cancel the interface change timer */
852                 in_dev->mr_ifc_count = 0;
853                 if (del_timer(&in_dev->mr_ifc_timer))

854 __in_dev_put(in_dev);
855 /* clear deleted report items */
856 igmpv3_clear_delrec(in_dev);
857 } else if (len < 12) {
858 return; /* ignore bogus packet; freed by caller */
859 } else { /* v3 */
860 if (!pskb_may_pull(skb, sizeof(struct igmpv3_query)))
861 return;
862
863 ih3 = igmpv3_query_hdr(skb);
864 if (ih3->nsrcs) {
865 if (!pskb_may_pull(skb, sizeof(struct igmpv3_query)
866 + ntohs(ih3->nsrcs)*sizeof(__be32)))
867 return;
868 ih3 = igmpv3_query_hdr(skb);
869 }
870
871 max_delay = IGMPV3_MRC(ih3->code)*(HZ/IGMP_TIMER_SCALE);
872 if (!max_delay)
873 max_delay = 1; /* can't mod w/ 0 */
874 in_dev->mr_maxdelay = max_delay;
875 if (ih3->qrv)
876 in_dev->mr_qrv = ih3->qrv;
877 if (!group) { /* general query */
878 if (ih3->nsrcs)
879 return; /* no sources allowed */
880 igmp_gq_start_timer(in_dev);
881 return;

882                 }
883                 /* mark sources to include, if group & source-specific */
884                 mark = ih3->nsrcs != 0;
885         }
      ... <snip> ...

A IGMPv3 query has a length >= 12 and no sources. This routine will exit at line 880, setting the general query timer (random timeout between 0 and query response time). This calls igmp_gq_timer_expire():

695 static void igmp_gq_timer_expire(unsigned long data) 696 {
697 struct in_device *in_dev = (struct in_device *)data;
698

699         in_dev->mr_gq_running = 0;
700         igmpv3_send_report(in_dev, NULL);
701         __in_dev_put(in_dev);

702 }

.. which only sends a v3 response. So if a v3 query is received, the kernel always sends a v3 response. I believe the correct fix would be to change:

---------------------------------

igmp.c 2010-09-08 17:47:36.434118473 -0700 renamed from igmp.c_orig 2010-09-08 17:46:56.798730173 -0700 +1 -2
@@ -834,7 +834,7 @@
        int                     mark = 0;
 
 
-       if (len == 8) {
+       if (len == 8 || IGMP_V2_SEEN(in_dev)) {
                if (ih->code == 0) {
                        /* Alas, old v1 router presents here. */
---------------------------------

where IGMP_V2_SEEN is previously defined as:

136 #define IGMP_V2_SEEN(in_dev) \
137 (IPV4_DEVCONF_ALL(dev_net(in_dev->dev), FORCE_IGMP_VERSION) == 2 || \
138 IN_DEV_CONF_GET((in_dev), FORCE_IGMP_VERSION) == 2 || \
139 ((in_dev)->mr_v2_seen && \
140 time_before(jiffies, (in_dev)->mr_v2_seen)))

IGMP queries happen once every 60 sec (per vlan), so the traffic is low. A IGMPv3 query *is* a strict superset of a IGMPv2 query, so this patch should properly short circuit it.

One issue is that this does not address force_igmp_version=1. Then again, I don't believe that there's much IGMPv1 multicast equipment in the wild. However there is a lot of v2-only equipment. If it's necessary to support the IGMPv1 case as well:

837 if (len == 8 || IGMP_V2_SEEN(in_dev) || IGMP_V1_SEEN(in_dev)) {

Please consider this one-line patch for inclusion in the Linux kernel.

Thank you,
-Bob Arendt / Rincon Research Corp.